LawPlayer
My bookmarksSign up freeSign up free
Source

Council Directive 74/648/EEC of 9 December 1974 amending Directive No 68/193/EEC on the marketing of material for the vegetative propagation of the vine

Council Directive 74/648/EEC of 9 December 1974 amending Directive No 68/193/EEC on the marketing of material for the vegetative propagation of the vine

Directive 74/648/EEC · Directive · 10 articles

Data as of 2026-07-04 · Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗

Article 1

Open ↗

Council Directive No 68/193/EEC is hereby amended as follows:

Article 2

Open ↗

The following shall be substituted for Article 1: "This Directive shall apply to material for the vegetative propagation of the vine (hereinafter called "propagation material") marketed within the Community."

Article 3

Open ↗

The following paragraph la shall be added to Article 3: "1a The Member States may subdivide the category "standard material" laid down in Article 2 into classes which comply with special conditions. These special conditions, the appellation or a time limit, may be determined in accordance with the procedure laid down in Article 17."

Article 4

Open ↗

The following subparagraph (c) shall be added to Article 3 (4): (1)OJ No C 2, 9.1.1974, p. 66. (2)OJ No C 8, 31.1.1974, p. 19. (3)OJ No L 93, 17.4.1968, p. 15. (4)OJ No L 71, 25.3.1971, p. 16. "(c) authorize Member States, notwithstanding Annex II (III) (1B) and (2B), to reduce the minimum stipulated lengths of propagation material, for production and marketing in certain areas where such authorization is justified by special conditions of growth."

Article 5

Open ↗

1. Article 11 shall become Article 11 (1). 2. The following paragraph 2 shall be added to Article 11: "2. The Member States shall take all necessary measures to ensure that the competent authorities are supplied with the following particulars during the marketing of vegetative propagation material, originating in another Member State or in a third country: (a) species (botanical designation), (b) variety and, where appropriate, the clone ; in the case of rooted grafts, these particulars shall be supplied for both the root stocks and the top graft cutting, (c) category, (d) nature of the propagation material, (e) country of production and official control authority, (f) country of dispatch, (g) importer, (h) quantity of the material. The manner in which these particulars must be presented may be determined in accordance with the procedure laid down in Article 17."

Article 6

Open ↗

The following shall be substituted for Article 17a: "Article 17a Any amendments to be made to the Annexes to the development of scientific knowledge or techniques shall be decided upon in accordance with the procedure laid down in Article 17."

Article 7

Open ↗

The following shall be substituted for Article 18a: "Article 18a In accordance with the procedure laid down in Article 17, a Member State may, if it so requests, be wholly or partially released from the obligation to apply this Directive with the exception, however, of Articles 12 (1) and 12a, in so far as the growing of vines and the marketing of propagation material are of minimal economic importance in its territory."

Article 8

Open ↗

The following shall be substituted for point 2 of Annex IV, Section A (a): "2. Name and address of the person responsible for sealing or his identification number."

Article 9

Open ↗

Member States shall, not later than 1 July 1976, bring into force the laws, regulations or administrative provisions needed in order to comply with the requirements of this Directive.

Article 10

Open ↗

This Directive is addressed to the Member States. Done at Brussels, 9 December 1974. For the Council The President Ch. BONNET

Other acts of the same type
Commission Delegated Directive 2014/70/EU of 13 March 2014 amending, for the purposes of adapting to technical progress, Annex IV to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead in micro-channel plates (MCPs) Text with EEA relevanceCommission Delegated Directive 2014/71/EU of 13 March 2014 amending, for the purposes of adapting to technical progress, Annex IV to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead in solder in one interface of large area stacked die elements Text with EEA relevanceCommission Delegated Directive 2014/72/EU of 13 March 2014 amending, for the purposes of adapting to technical progress, Annex III to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead in solders and termination finishes of electrical and electronic components and finishes of printed circuit boards used in ignition modules and other electrical and electronic engine control systems Text with EEA relevanceCommission Delegated Directive 2014/73/EU of 13 March 2014 amending, for the purposes of adapting to technical progress, Annex IV to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead in platinized platinum electrodes used for conductivity measurements Text with EEA relevanceCommission Delegated Directive 2014/74/EU of 13 March 2014 amending, for the purposes of adapting to technical progress, Annex IV to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead used in other than C-press compliant pin connector systems for industrial monitoring and control instruments Text with EEA relevanceCommission Delegated Directive 2014/75/EU of 13 March 2014 amending, for the purposes of adapting to technical progress, Annex IV to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for mercury in cold cathode fluorescent lamps (CCFLs) for back-lighting liquid crystal displays, not exceeding 5 mg per lamp, used in industrial monitoring and control instruments placed on the market before 22 July 2017 Text with EEA relevanceCommission Delegated Directive 2014/76/EU of 13 March 2014 amending, for the purposes of adapting to technical progress, Annex III to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for Mercury in hand crafted luminous discharge tubes (HLDTs) used for signs, decorative or architectural and specialist lighting and light-artwork Text with EEA relevanceCommission Implementing Directive 2014/37/EU of 27 February 2014 amending Council Directive 91/671/EEC relating to the compulsory use of safety belts and child restraint systems in vehiclesDirective 2014/23/EU of the European Parliament and of the Council of 26 February 2014 on the award of concession contracts Text with EEA relevanceDirective 2014/24/EU of the European Parliament and of the Council of 26 February 2014 on public procurement and repealing Directive 2004/18/EC Text with EEA relevanceDirective 2014/25/EU of the European Parliament and of the Council of 26 February 2014 on procurement by entities operating in the water, energy, transport and postal services sectors and repealing Directive 2004/17/EC Text with EEA relevanceDirective 2014/26/EU of the European Parliament and of the Council of 26 February 2014 on collective management of copyright and related rights and multi-territorial licensing of rights in musical works for online use in the internal market Text with EEA relevance

Source: EUR-Lex (Publications Office of the EU), © European Union, reuse permitted under Commission Decision 2011/833/EU.

Contents

What to look at next