97/463/EC: Commission Decision of 27 June 1997 on the procedure for attesting the conformity of construction products pursuant to Article 20 (2) of Council Directive 89/106/EEC as regards plastic anchors for use in concrete and masonry (Text with EEA relevance)

Directive 89/106/EEC · Decision · 4 articles

Data as of 2026-07-04 · Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗

Article 1

The products set out in Annex I shall have their conformity attested by a procedure whereby, in addition to a factory production control system operated by the manufacturer, an approved certification body is involved in assessment and surveillance of the production control or of the product itself.

Article 2

The procedure for attesting conformity as set out in Annex II shall be indicated in mandates for guidelines for European technical approvals.

Article 3

This Decision is addressed to the Member States. Done at Brussels, 27 June 1997. For the Commission Martin BANGEMANN Member of the Commission (1) OJ No L 40, 11. 2. 1989, p. 12. (2) OJ No L 220, 30. 8. 1993, p. 1.

Supplementary provisions

ANNEX ISupplementary provisions

Plastic anchors for use in concrete and masonry: for use in systems, such as facade systems, for fixing or supporting elements which contribute to the stability of the systems. ANNEX II PRODUCT FAMILY Plastic anchors for use in concrete and masonry (1/1) Systems of attestation of conformity For the product(s) and intended use(s) listed below, European Organization for Technical Approval (EOTA) is requested to specify the following system(s) of attestation of conformity in the relevant Guideline for European Technical Approval: >TABLE> The specification for the system should be such that it can be implemented even where performance does not need to be determined for a certain characteristic, because at least one Member State has no legal requirement at all for such characteristic (see Article 2.1 of Directive 89/106/EEC and, where applicable, clause 1.2.3 of the Interpretative Documents). In those cases the verification of such a characteristic must not be imposed on the manufacturer if he does not wish to declare the performance of the product in that respect.

Other acts of the same type

Council Decision (EU) 2016/1197 of 26 October 2015 on the signing, on behalf of the European Union, and provisional application of the Agreement between the European Union and the Republic of Kiribati on the short-stay visa waiver Commission Implementing Decision (EU) 2015/1928 of 23 October 2015 terminating the anti-dumping proceeding concerning imports of certain aluminium foil originating in the People's Republic of China Council Decision (CFSP) 2015/1908 of 22 October 2015 in support of a global reporting mechanism on illicit small arms and light weapons and other illicit conventional weapons and ammunition to reduce the risk of their illicit trade (‘iTrace II’)Council Decision (EU) 2015/1969 of 22 October 2015 establishing the position to be taken on behalf of the European Union within the Committee on Government Procurement on the accession of Ukraine to the Revised Agreement on Government Procurement Council Decision (EU) 2015/1988 of 22 October 2015 on the signing, on behalf of the Union, of the Stabilisation and Association Agreement between the European Union and the European Atomic Energy Community, of the one part, and Kosovo, of the other part Council Decision (EU) 2015/1993 of 22 October 2015 approving the conclusion, by the European Commission, on behalf of the European Atomic Energy Community, of the Stabilisation and Association Agreement between the European Union and the European Atomic Energy Community, of the one part, and of Kosovo, of the other part Commission Decision (EU) 2016/2326 of 21 October 2015 on State aid SA.38375 (2014/C ex 2014/NN) which Luxembourg granted to Fiat (notified under document C(2015) 7152) (Text with EEA relevance )Commission Decision (EU) 2017/502 of 21 October 2015 on State aid SA.38374 (2014/C ex 2014/NN) implemented by the Netherlands to Starbucks (notified under document C(2015) 7143) (Text with EEA relevance. )Commission Implementing Decision (EU) 2015/1901 of 20 October 2015 laying down certification rules and a model health certificate for importation into the Union of consignments of live animals and of animal products from New Zealand and repealing Decision 2003/56/EC (notified under document C(2015) 7013) (Text with EEA relevance)Political and Security Committee Decision (CFSP) 2015/1916 of 20 October 2015 on the establishment of the Committee of Contributors for the European Union CSDP mission in Mali (EUCAP Sahel Mali) (EUCAP Sahel Mali/3/2015)Council Decision (CFSP) 2015/1863 of 18 October 2015 amending Decision 2010/413/CFSP concerning restrictive measures against Iran Council Decision (EU) 2015/1855 of 13 October 2015 establishing the position to be taken on behalf of the European Union within the Council for Trade-Related Aspects of Intellectual Property Rights and the General Council of the World Trade Organisation as regards the request from least-developed country Members for an extension of the transitional period under paragraph 1 of Article 66 of the Agreement on Trade-Related Aspects of Intellectual Property Rights concerning certain obligations related to pharmaceutical products, and for a waiver of the obligations under paragraphs 8 and 9 of Article 70 of that Agreement

Source: EUR-Lex (Publications Office of the EU), © European Union, reuse permitted under Commission Decision 2011/833/EU.

What to look at next

Browse all EU Legal ActsEvery instrument by type and year, full text free to read section by sectionEuropean Union legislation EU Legal Acts by type and yearGrouped by instrument type and year of enactment, so you can find others of the same kindBrowse by type and year European Union: what this database coversWhich datasets are here, which official source they come from, and how current they areEuropean Union overview