My bookmarksSign up free

2001/171/EC: Commission Decision of 19 February 2001 establishing the conditions for a derogation for glass packaging in relation to the heavy metal concentration levels established in Directive 94/62/EC on packaging and packaging waste (Text with EEA relevance) (notified under document number C(2001) 398)

2001/171/EC: Commission Decision of 19 February 2001 establishing the conditions for a derogation for glass packaging in relation to the heavy metal concentration levels established in Directive 94/62/EC on packaging and packaging waste (Text with EEA relevance) (notified under document number C(2001) 398)

Directive 94/62/EC Β· Decision Β· 7 articles

Data as of 2026-07-04 Β· Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. Β· Read the official text β†—

Article 1

This Decision, shall apply to glass packaging covered by Directive 94/62/EC, and aims to establish the conditions under which the concentration levels established in Article 11 of Directive 94/62/EC shall not apply.

Article 2

For the purposes of this Decision: - the definitions as set out in Article 3 of Directive 94/62/EC shall apply, - "intentionally introduced" shall mean "deliberately utilised in the formulation of a packaging or a packaging component where its continued presence is desired in the final packaging or packaging component to provide a specific characteristic, appearance, or quality"; the use of recycled materials as feedstock for the manufacture of new packaging materials, where some portion of the recycled materials may contain amounts of regulated metals, is not be considered as intentionally introduced.

Article 3

Glass packaging is allowed to exceed, after the date of 30 June 2001, the limit of 100 ppm by weight established in Article 11 of Directive 94/62/EC where it complies with all the conditions established in Articles 4 and 5 of this Decision.

Article 4

No lead, cadmium, mercury or hexavalent chromium shall be intentionally introduced during the manufacturing process. The packaging material may only exceed the concentration limits because of the addition of recycled materials.

Article 5

Where the average heavy metals concentration levels on any twelve consecutive monthly controls made from the production of each individual glass furnace, representative of normal and regular production activity, exceeds the 200 ppm limit, the manufacturer or this authorised representative shall submit a report to the competent authorities in the Member States. This report shall include as a minimum the following information: - measures values, - description of measurement methods employed, - suspected sources for the presence of heavy metals concentration levels, - detailed description of the measures taken to reduce the heavy metals concentration levels. Where neither the manufacturer nor his authorised representative is established within the European Union, the obligation to submit a report to the competent authorities shall be with the person who places the product on the Communtiy market. Measurement results from production sites and measurement methods employed shall be made available at any time to the competent authorities, if requested.

Article 6

This Decision shall expire on 30 June 2006, unless it is extended, in particular on the basis of the reports under Article 5 of this Decision and Article 17 of Directive 94/62/EC, in accordance with the procedure laid down in Article 21 of Directive 94/62/EC.

Article 7

This Decision is addressed to the Member States. Done at Brussels, 19 February 2001. For the Commission Margot WallstrΓΆm Member of the Commission (1) OJ L 365, 31.12.1994, p. 10.

Source: EUR-Lex (Publications Office of the EU), Β© European Union, reuse permitted under Commission Decision 2011/833/EU.

What to look at next