Commission Directive 2001/2/EC of 4 January 2001 adapting to technical progress Council Directive 1999/36/EC on transportable pressure equipment (Text with EEA relevance)

• CELEX: Directive 2001/2/EC
• Articles: 5

Article 1

The text of the Annex to Directive 1999/36/EC is replaced by the text of the Annex to this Directive.

Article 2

1. Member States shall bring into force the laws, regulations and administrative provisions necessary to comply with this Directive by 1 July 2001 at the latest. They shall forthwith inform the Commission thereof.

When Member States adopt these measures they shall contain a reference to this Directive or shall be accompanied by such reference on the occasion of their official publication. The methods of making such a reference shall be laid down by the Member States.

2. Member States shall comunicate to the Commission the text of the main provisions of domestic law that they adopt in the field governed by this Directive.

Article 3

This Directive shall enter into force on the seventh day following its publication in the Official Journal of the European Communities.

Article 4

This Directive is addressed to the Member States.

Done at Brussels, 4 January 2001.

For the Commission

Loyola De Palacio

Vice-President

(1) OJ L 138, 1.6.1999, p. 20.

(2) OJ L 319, 12.12.1994, p. 7.

(3) OJ L 279, 1.11.2000, p. 40.

(4) OJ L 235, 17.9.1996, p. 25.

(5) OJ L 279, 1.11.2000, p. 44.

(6) Regulation set out in Annex I to Appendix B of the Convention on the International Carriage of Goods by Rail (COTIF).

Schedules & Appendices

ANNEX

"ANNEX V

MODULES TO BE FOLLOWED FOR CONFORMITY ASSESSMENT

The following table indicates which conformity assessment modules as described in Annex IV, Part I, are to be followed for the transportable pressure equipment defined in Article 2(1).

>TABLE>

Notice 1.

Transportable pressure equipment must be subject, at the choice of the manufacturer, to one of the conformity assessment procedures laid down for the category in which it is classified. In the case of receptacles, or their valves or other accessories used for transport, the manufacturer may also choose to apply one of the set procedures for the higher categories.

Notice 2.

As part of the quality assurance procedures, the notified body must, when making unannounced visits, take a sample of the equipment at the manufacturing or storage premises for the purpose of carrying out a check, or having a check carried out, to verify compliance with the requirements of this Directive. For this purpose the manufacturer must inform the notified body of the production programme planned. The notified body shall carry out at least two visits during the first year of manufacturing. The frequency of subsequent visits will be determined by the notified body on the basis of the criteria set out in point 4.4 of the relevant modules in Annex IV, Part I."