My bookmarksSign up free
Source

Commission Directive 2005/91/EC of 16 December 2005 amending Directive 2003/90/EC setting out implementing measures for the purposes of Article 7 of Council Directive 2002/53/EC as regards the characteristics to be covered as a minimum by the examination and the minimum conditions for examining certain varieties of agricultural plant species (Text with EEA relevance)

Commission Directive 2005/91/EC of 16 December 2005 amending Directive 2003/90/EC setting out implementing measures for the purposes of Article 7 of Council Directive 2002/53/EC as regards the characteristics to be covered as a minimum by the examination and the minimum conditions for examining certain varieties of agricultural plant species (Text with EEA relevance)

Directive 2005/91/EC · Directive · 6 articles

Data as of 2026-07-04 · Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗

Article 1

Open ↗

Annexes I and II to Directive 2003/90/EC are replaced by the text in the Annex to this Directive.

Article 2

Open ↗

For examinations started before 1 April 2006, Member States may decide to apply the text of Directive 2003/90/EC applying before its amendment by the present Directive.

Article 3

Open ↗

Member States shall adopt and publish, by 31 March 2006 at the latest, the laws, regulations and administrative provisions necessary to comply with this Directive. They shall forthwith communicate to the Commission the text of those provisions and a correlation table between those provisions and this Directive. They shall apply those provisions from 1 April 2006. When Member States adopt those provisions, they shall contain a reference to this Directive or be accompanied by such a reference on the occasion of their official publication. Member States shall determine how such reference is to be made.

Article 4

Open ↗

This Directive shall enter into force on the seventh day following its publication in the Official Journal of the European Union .

Supplementary provisions

ANNEXSupplementary provisions

Open ↗

ANNEX ‘ANNEX I List of species which shall comply with CPVO test guidelines Species listed in the Common Catalogue CPVO protocol Field pea Pea, TP 7/1 of 6.11.2003 Swede rape Oilseed rape, TP 36/1 of 25.3.2004 Sunflower Sunflower, TP 81/1 of 31.10.2002 Oats Oats, TP 20/1 of 6.11.2003 Barley Barley, TP 19/2 of 6.11.2003 Rice Rice, TP 16/1 of 18.11.2004 Rye Rye, TP 58/1 of 31.10.2002 Triticale Triticale, TP 121/1 of 6.11.2003 Wheat Wheat, TP 3/3 of 6.11.2003 Durum wheat Durum wheat, TP120/2 of 6.11.2003 Maize Maize, TP 2/2 of 15.11.2001 Potato Potato, TP 23/1 of 27.3.2002 The text of these protocols can be found on the CPVO web site (www.cpvo.eu.int). ‘ANNEX II List of species which shall comply with UPOV test guidelines Species listed in the Common Catalogue UPOV guidelines Fodder beet Fodder beet, guideline TG/150/3 of 4.11.1994 Velvet bent Bent, guideline TG/30/6 of 12.10.1990 Red top Bent, guideline TG/30/6 of 12.10.1990 Creeping bent Bent, guideline TG/30/6 of 12.10.1990 Brown top Bent, guideline TG/30/6 of 12.10.1990 Rescue grass Rescue grass, guideline TG/180/3 of 4.4.2001 Alaska brome-grass Alaska brome-grass, guideline TG/180/3 of 4.4.2001 Cocksfoot Cocksfoot, guideline TG/31/8 of 17.4.2002 Tall fescue Tall fescue, guideline TG/39/8 of 17.4.2002 Sheep’s fescue Sheep's fescue, guideline TG/67/4 of 12.11.1980 Meadow fescue Meadow fescue, guideline TG/39/8 of 17.4.2002 Red fescue Red fescue, guideline TG/67/4 of 12.11.1980 Italian ryegrass Ryegrass, guideline TG/4/7 of 12.10.1990 Perennial ryegrass Ryegrass, guideline TG/4/7 of 12.10.1990 Hybrid ryegrass Ryegrass, guideline TG/4/7 of 12.10.1990 Timothy Timothy, guideline TG/34/6 of 7.11.1984 Smooth-stalked meadow grass Kentucky bluegrass, guideline TG/33/6 of 12.10.1990 White lupin White lupin, guideline TG/66/4 of 31.3.2004 Blue lupin Blue lupin, guideline TG/66/4 of 31.3.2004 Yellow lupin Yellow lupin, guideline TG/66/4 of 31.3.2004 Lucerne Lucerne, guideline TG/6/5 of 6.4.2005 Red clover Red clover, guideline TG/5/7 of 4.4.2001 White clover White clover, guideline TG/38/7 of 9.4.2003 Field bean Field bean, guideline TG/8/6 of 17.4.2002 Common vetch Common vetch, guideline TG/32/6 of 21.10.1988 Swede Swede, guideline 89/6 of 4.4.2001 Fodder radish Fodder radish, guideline TG/178/3 of 4.4.2001 Groundnut/Peanut Groundnut, guideline TG/93/3 of 13.11.1985 Turnip rape Turnip rape, guideline TG/185/3 of 17.4.2002 Safflower Safflower, guideline TG/134/3 of 12.10.1990 Cotton Cotton, guideline TG/88/6 of 4.4.2001 Flax/Linseed Flax/Linseed, guideline TG/57/6 of 20.10.1995 Opium poppy Opium/Seed poppy, guideline TG/166/3 of 24.3.1999 White mustard White mustard, guideline TG/179/3 of 4.4.2001 Soya bean Soya bean, guideline TG/80/6 of 1.4.1998 Sorghum Sorghum, guideline TG/122/3 of 6.10.1989 The text of these guidelines can be found on the UPOV web site (www.upov.int). ’

Other acts of the same type
Council Directive 2013/51/Euratom of 22 October 2013 laying down requirements for the protection of the health of the general public with regard to radioactive substances in water intended for human consumptionCommission Delegated Directive 2014/1/EU of 18 October 2013 amending, for the purposes of adapting to technical progress, the Annex IV to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead as an alloying element for bearings and wear surfaces in medical equipment exposed to ionising radiation Text with EEA relevanceCommission Delegated Directive 2014/2/EU of 18 October 2013 amending, for the purposes of adapting to technical progress, the Annex IV to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for cadmium in phosphor coatings in image intensifiers for X-ray images until 31 December 2019 and in spare parts for X-ray systems placed on the EU market before 1 January 2020 Text with EEA relevanceCommission Delegated Directive 2014/3/EU of 18 October 2013 amending, for the purposes of adapting to technical progress, the Annex IV to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead acetate marker for use in stereotactic head frames for use with CT (Computed Tomography) and MRI and in positioning systems for gamma beam and particle therapy equipment Text with EEA relevanceCommission Delegated Directive 2014/4/EU of 18 October 2013 amending, for the purposes of adapting to technical progress, the Annex IV to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead enabling vacuum tight connections between aluminium and steel in X-ray image intensifiers Text with EEA relevanceCommission Delegated Directive 2014/5/EU of 18 October 2013 amending, for the purposes of adapting to technical progress, Annex IV to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead in solders on printed circuit boards, termination coatings of electrical and electronic components and coatings of printed circuit boards, solders for connecting wires and cables, solders connecting transducers and sensors that are used durably at a temperature below – 20 °C under normal operating and storage conditions Text with EEA relevanceCommission Delegated Directive 2014/6/EU of 18 October 2013 amending, for the purposes of adapting to technical progress, the Annex IV to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead in the surface coatings of pin connector systems requiring nonmagnetic connectors which are used durably at a temperature below – 20 °C under normal operating and storage conditions Text with EEA relevanceCommission Delegated Directive 2014/7/EU of 18 October 2013 amending, for the purposes of adapting to technical progress, Annex IV to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead in solders, termination coatings of electrical and electronic components and printed circuit boards, connections of electrical wires, shields and enclosed connectors which are used (a) in magnetic fields within the sphere of 1 m radius around the isocentre of the magnet in medical magnetic resonance imaging equipment, including patient monitors designed to be used within this sphere, or (b) in magnetic fields within 1 m distance from the external surfaces of cyclotron magnets, magnets for beam transport and beam direction control applied for particle therapy Text with EEA relevanceCommission Delegated Directive 2014/8/EU of 18 October 2013 amending, for the purposes of adapting to technical progress, Annex IV to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead in solders for mounting cadmium telluride and cadmium zinc telluride digital array detectors to printed circuit boards Text with EEA relevanceCommission Delegated Directive 2014/9/EU of 18 October 2013 amending, for the purposes of adapting to technical progress, the Annex IV to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead and cadmium in metallic bonds creating superconducting magnetic circuits in MRI, SQUID, NMR (Nuclear Magnetic Resonance) or FTMS (Fourier Transform Mass Spectrometer) detectors Text with EEA relevanceCommission Delegated Directive 2014/10/EU of 18 October 2013 amending, for the purposes of adapting to technical progress, Annex IV to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead in alloys, as a superconductor or thermal conductor, used in cryo-cooler cold heads and/or in cryo-cooled cold probes and/or in cryo-cooled equipotential bonding systems, in medical devices (category 8) and/or in industrial monitoring and control instruments Text with EEA relevanceCommission Delegated Directive 2014/11/EU of 18 October 2013 amending, for the purposes of adapting to technical progress, the Annex IV to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for hexavalent chromium in alkali dispensers used to create photocathodes in X-ray image intensifiers until 31 December 2019 and in spare parts for X-ray systems placed on the EU market before 1 January 2020 Text with EEA relevance

Source: EUR-Lex (Publications Office of the EU), © European Union, reuse permitted under Commission Decision 2011/833/EU.

Contents

What to look at next