2010/738/EU: Commission Decision of 2 December 2010 establishing the classes of reaction-to-fire performance for certain construction products as regards fibrous gypsum plaster casts (notified under document C(2010) 392) Text with EEA relevance

• Articles: 5

Article 1

The construction products and/or materials which satisfy all the requirements of the performance characteristic ‘reaction-to-fire’ without need for further testing are set out in the Annex.

Article 2

The specific classes to be applied to different construction products and/or materials, within the reaction-to-fire classification adopted in Decision 2000/147/EC, are set out in the Annex to this Decision.

Article 3

Products shall be considered in relation to their end-use application, where relevant.

Article 4

This Decision is addressed to the Member States.

Schedules & Appendices

ANNEX

ANNEX

The table set out in this Annex lists construction products and/or materials which satisfy all of the requirements for the performance characteristic reaction-to-fire without need for testing.

Table

Classes of reaction-to-fire performance for fibrous gypsum plaster casts reinforced with sisal fibres or jute fibres

Product

Product detail

Minimum density

(kg/m 3 )

Class  ( 1 )

Fibrous gypsum plaster casts

Product according to EN 13815, made by casting gypsum plaster mixed with water, reinforced by uniformly dispersed sisal or jute fibres at the rate of no more than 2,5 % by mass.

1 000

A1

( 1 )   Class as provided for in Table 1 of the Annex to Decision 2000/147/EC.