LawPlayer
My bookmarksSign up freeSign up free
Source

2011/477/EU: Commission Decision of 27 July 2011 on the safety requirements to be met by European standards to address certain risks posed to children by internal blinds, corded window coverings and safety devices pursuant to Directive 2001/95/EC of the European Parliament and of the Council Text with EEA relevance

2011/477/EU: Commission Decision of 27 July 2011 on the safety requirements to be met by European standards to address certain risks posed to children by internal blinds, corded window coverings and safety devices pursuant to Directive 2001/95/EC of the European Parliament and of the Council Text with EEA relevance

Directive 2001/95/EC · Decision · 4 articles

Data as of 2026-07-04 · Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗

Article 1

Open ↗

For the purposes of this Decision the following definitions shall apply: (a) ‘ internal blinds ’ shall mean a window covering product fitted anywhere within the internal surface of the building; (b) ‘ corded window coverings ’ shall mean a product used to cover a window, other than an internal blind, which features exposed cords. Window coverings can be placed outside the window, or inside two window panels, or in front of a window; (c) ‘ hazardous loop ’ shall mean a loop of exposed cord, chain or similar, combined or not with fabric, and that would fit over the head or around the neck of a young child creating a strangulation hazard; (d) ‘ safety devices ’ shall mean a device or a design that protects a young child from the risk of strangulation by, for example, preventing the forming of a hazardous loop in the cord or chain, breaking the hazardous loop, releasing a cord or a chain when a hazardous loop is formed or when the cord or a chain is subject to a load, making the cord or chain inaccessible to children, preventing the cords getting entangled; (e) ‘ accessible cord(s), chain(s), ball-chain(s) or similar ’ shall mean cord(s), chain(s), ball-chain(s) or similar that are exposed from the front, back or side of the blind or window covering, and can be reached and pulled by a young child, creating a strangulation hazard. Height is not considered as a restriction to accessibility.

Article 2

Open ↗

The safety requirements for internal blinds, corded window coverings and safety devices to be met by European standards pursuant to Article 4 of Directive 2001/95/EC are set out in the Annex to this Decision.

Article 3

Open ↗

This Decision shall enter into force on the 20th day following its publication in the Official Journal of the European Union .

Supplementary provisions

ANNEXSupplementary provisions

Open ↗

ANNEX Safety requirements for internal blinds, corded window coverings and safety devices 1.   SCOPE The safety requirements detailed in this document shall apply to all internal blinds and corded window coverings whatever their design and the nature of the materials used, such as: — Venetian blinds, — roller blinds, — vertical blinds, — pleated and honeycomb blinds, — Roman Shades, — Austrian/Festoon blinds, — panel blinds, — plantation shutters, — roll-up blinds. Draperies, insect screens and blinds in sealed-glazed units, if operated with cords, chains and ball-chains or similar, which are accessible and form a hazardous loop are also subject to these requirements. These safety requirements shall refer to children (young children) aged from 0 to 42 months as a minimum. 2.   REQUIREMENTS In defining performance requirements for internal blinds and corded window coverings, it is essential to consider their reasonable foreseeable conditions of use, and the potential hazards that can result from accessible cord(s), chain(s), ball-chain(s) or similar to children. In order to reduce the risk of strangulation and internal asphyxiation internal window blinds (and corded window coverings) shall be of an inherently safe design. Every possible means, based in the state of the art and technology, shall be considered for the safe design of the product, when used in all reasonably foreseeable environments where young children have access to or are likely to be present, such as, for example, homes, hotels, hospitals, churches, shops, schools, nurseries, and public places in general. Blinds and window coverings to be fitted in offices or any other place, which is transformed from its initial destination and where young children are likely to be present, shall also be subject to the present requirements. Internal blinds and corded window coverings that have accessible cord(s), chain(s), ball-chain(s) or similar shall comply with the following minimum requirements: 1. cord(s), chain(s), ball-chain(s) and similar shall not form a hazardous loop; 2. if the design of the product does not eliminate the risk that a hazardous loop is formed, the product shall be provided with appropriate safety devices, to minimise the risk of strangulation; 3. safety devices shall be provided as an integral part of the product; 4. safety devices which are non-integral (such as cleats) shall be pre-installed on the operating cord(s) or chain(s) or ball-chain(s) of the blind or window covering. In addition, a warning shall be conspicuously displayed on the safety device. The warning shall convey at least the following messages: ‘Children can strangle if this device is not installed. Read carefully the instructions and install accordingly. Always use this device to keep cords or chains out of reach of children’. 5. if present, the safety device(s) shall be resistant to the operation by young children. In addition, the safety device(s) shall not pose risks of physical injuries to children, due, for example, to sharp edges, entrapment of fingers or protruding parts. The safety devices shall also sustain durability and fatigue tests (wear and tear) and shall be resistant to ageing due to weather conditions. The safety device shall not release small parts that could result in internal asphyxiation of the child. 6. cord(s), chain(s), ball-chain(s) and similar shall not release small parts which could result in internal asphyxiation of the child. 3.   PRODUCT SAFETY INFORMATION Warnings shall be provided, in a clear and conspicuous way at the point of sale, on the package, on the product and in the information for use. The warnings shall convey at least the following: — ‘Young children have been strangled by loops in pull-cords, chains and tapes, and cords that operate the product’, — ‘To avoid strangulation and entanglement, keep cords out of the reach of young children. Cords may become wrapped around a child’s neck’, — ‘Move beds, cots and furniture away from window covering cords’, — ‘Do not tie cords together. Make sure cords do not twist and create a loop’. The warnings shall include the relevant pictogram. The name or trademark of the manufacturer or importer and professional installer (if any) shall also be displayed on the product. Instructions for assembling, installing and safely using the blind or the window covering (including the safety device(s)) shall be included in the package. 4.   REQUIREMENTS FOR SAFETY DEVICES INTENDED FOR RETROFITTING Internal blinds or corded window coverings fitted with the relevant safety device(s), shall fulfil the requirements set out in section 2. The safety device(s) shall be accompanied by the following warnings, information and instructions: — the name or trademark of the manufacturer or importer and professional installer (if any), — the instructions: ‘ Read these instructions carefully before installing and using the device. Children can be strangled if the device is not installed correctly. Keep the instructions for future reference ’ ‘ Use of additional safety devices helps reduce the risk of strangulation but cannot be considered entirely foolproof ’, — the instructions: ‘ Test the device if not used regularly ’ and ‘ Replace the device if it is faulty ’, — a warning that the release of small parts could result in the internal asphyxiation of the child, — information on the type of internal blind or corded window covering for which the product is designed and tested, — information on the use (purpose, and possible limitations of the safety device), — precise instructions on correct installation and location of the device(s). If a special assembly tool is needed, it shall be provided by the supplier of the device(s), — the instructions shall be accompanied by pictograms to facilitate understanding, — any other information for safe use.

Other acts of the same type
Council Decision (CFSP) 2016/609 of 18 April 2016 amending Decision 2010/413/CFSP concerning restrictive measures against IranDecision (EU) 2016/661 of the European Central Bank of 15 April 2016 on the total amount of annual supervisory fees for 2016 (ECB/2016/7)Commission Implementing Decision (EU) 2016/599 of 15 April 2016 concerning the consistency of certain targets included in the revised national or functional airspace block plans submitted pursuant to Regulation (EC) No 549/2004 of the European Parliament and of the Council with the Union-wide performance targets for the second reference period (notified under document C(2016) 2140) (Text with EEA relevance)Commission Implementing Decision (EU) 2016/600 of 15 April 2016 amending Decision 2007/453/EC as regards the BSE status of Romania (notified under document C(2016) 2186) (Text with EEA relevance)Commission Decision (EU) 2016/611 of 15 April 2016 on the reference document on best environmental management practice, sector environmental performance indicators and benchmarks of excellence for the tourism sector under Regulation (EC) No 1221/2009 on the voluntary participation by organisations in a Community eco-management and audit scheme (EMAS) (notified under document C(2016) 2137) (Text with EEA relevance)Commission Implementing Decision (EU) 2016/586 of 14 April 2016 on technical standards for the refill mechanism of electronic cigarettes (notified under document C(2016) 2093) (Text with EEA relevance)Commission Implementing Decision (EU) 2016/598 of 14 April 2016 authorising an extension of use of lipid extract from Antarctic Krill (Euphausia superba) as a novel food ingredient under Regulation (EC) No 258/97 of the European Parliament and of the CouncilCommission Implementing Decision (EU) 2016/770 of 14 April 2016 establishing a common format for the submission of information concerning the operation of the procedures pursuant to Regulation (EU) No 649/2012 of the European Parliament and of the Council concerning the export and import of hazardous chemicals (notified under document C(2016) 2068)Decision (EU) 2016/618 of the European Parliament and of the Council of 13 April 2016 on the mobilisation of the European Globalisation Adjustment Fund (application from Sweden — EGF/2015/009 SE/Volvo Trucks)Decision (EU) 2016/619 of the European Parliament and of the Council of 13 April 2016 on the mobilisation of the European Globalisation Adjustment Fund (EGF/2016/000 TA 2016 — Technical assistance at the initiative of the Commission)Council Decision (CFSP) 2016/564 of 11 April 2016 amending Decision 2013/798/CFSP concerning restrictive measures against the Central African RepublicCouncil Decision (CFSP) 2016/565 of 11 April 2016 amending Decision 2011/235/CFSP concerning restrictive measures directed against certain persons and entities in view of the situation in Iran

Source: EUR-Lex (Publications Office of the EU), © European Union, reuse permitted under Commission Decision 2011/833/EU.

Contents

What to look at next