2014/148/EU: Commission Implementing Decision of 17 March 2014 amending Decision 2011/130/EU establishing minimum requirements for the cross-border processing of documents signed electronically by competent authorities under Directive 2006/123/EC of the European Parliament and of the Council on services in the internal market (notified under document C(2014) 1640) Text with EEA relevance
2014/148/EU: Commission Implementing Decision of 17 March 2014 amending Decision 2011/130/EU establishing minimum requirements for the cross-border processing of documents signed electronically by competent authorities under Directive 2006/123/EC of the European Parliament and of the Council on services in the internal market (notified under document C(2014) 1640) Text with EEA relevance
Decision 2011/130/EU · Decision · 4 articles
Data as of 2026-07-04 · Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗
Amendments to Commission Decision 2011/130/EU ( 3 )
Decision 2011/130/EU is amended as follows:
(1)
Paragraph 1 of Article 1 is replaced by the following:
‘1. Member States shall put in place the necessary technical means allowing them to process electronically signed documents that service providers submit in the context of completing procedures and formalities through the Points of Single Contact as foreseen by Article 8 of Directive 2006/123/EC, and which are signed by competent authorities of other Member States with an XML, a CMS or a PDF advanced electronic signature at any conformance level or using an associated signature container at basic level provided these comply with the technical specifications listed in the Annex.’;
(2)
the Annex is replaced by the Annex to this Decision.
ANNEX
‘ANNEX
LIST OF TECHNICAL SPECIFICATIONS FOR XML, CMS OR PDF ADVANCED ELECTRONIC SIGNATURES AND THE ASSOCIATED SIGNATURE CONTAINER
Advanced electronic signatures mentioned in Article 1 paragraph 1 of the Decision must comply with one of the following ETSI technical specifications:
XAdES Baseline Profile
ETSI TS 103171 v.2.1.1 ( 1 )
CAdES Baseline Profile
ETSI TS 103173 v.2.2.1 ( 2 )
PAdES Baseline Profile
ETSI TS 103172 v.2.2.2 ( 3 )
Associated signature container mentioned in Article 1 paragraph 1 of the Decision must comply with the following ETSI technical specifications:
Associated Signature Container Baseline Profile
ETSI TS 103174 v.2.2.1 ( 4 )
( 1 ) http://www.etsi.org/deliver/etsi_ts/103100_103199/103171/02.01.01_60/ts_103171v020101p.pdf
( 2 ) http://www.etsi.org/deliver/etsi_ts/103100_103199/103173/02.02.01_60/ts_103173v020201p.pdf
( 3 ) http://www.etsi.org/deliver/etsi_ts/103100_103199/103172/02.02.02_60/ts_103172v020202p.pdf
( 4 ) http://www.etsi.org/deliver/etsi_ts/103100_103199/103174/02.02.01_60/ts_103174v020201p.pdf’
