My bookmarksSign up free
Source

Commission Delegated Directive 2014/7/EU of 18 October 2013 amending, for the purposes of adapting to technical progress, Annex IV to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead in solders, termination coatings of electrical and electronic components and printed circuit boards, connections of electrical wires, shields and enclosed connectors which are used (a) in magnetic fields within the sphere of 1 m radius around the isocentre of the magnet in medical magnetic resonance imaging equipment, including patient monitors designed to be used within this sphere, or (b) in magnetic fields within 1 m distance from the external surfaces of cyclotron magnets, magnets for beam transport and beam direction control applied for particle therapy Text with EEA relevance

Commission Delegated Directive 2014/7/EU of 18 October 2013 amending, for the purposes of adapting to technical progress, Annex IV to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead in solders, termination coatings of electrical and electronic components and printed circuit boards, connections of electrical wires, shields and enclosed connectors which are used (a) in magnetic fields within the sphere of 1 m radius around the isocentre of the magnet in medical magnetic resonance imaging equipment, including patient monitors designed to be used within this sphere, or (b) in magnetic fields within 1 m distance from the external surfaces of cyclotron magnets, magnets for beam transport and beam direction control applied for particle therapy Text with EEA relevance

Directive 2014/7/EU · Directive · 5 articles

Data as of 2026-07-04 · Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗

Article 1

Open ↗

Annex IV to Directive 2011/65/EU is amended as set out in the Annex to this Directive.

Article 2

Open ↗

1.   Member States shall bring into force the laws, regulations and administrative provisions necessary to comply with this Directive by the last day of the sixth month after entry into force at the latest. They shall forthwith communicate to the Commission the text of those provisions. When Member States adopt those provisions, they shall contain a reference to this Directive or be accompanied by such a reference on the occasion of their official publication. Member States shall determine how such reference is to be made. 2.   Member States shall communicate to the Commission the text of the main provisions of national law which they adopt in the field covered by this Directive.

Article 3

Open ↗

This Directive shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union .

Supplementary provisions

ANNEXSupplementary provisions

Open ↗

ANNEX In Annex IV to Directive 2011/65/EU the following point 27 is added: ‘27. Lead in — solders, — termination coatings of electrical and electronic components and printed circuit boards, — connections of electrical wires, shields and enclosed connectors, which are used in (a) magnetic fields within the sphere of 1 m radius around the isocentre of the magnet in medical magnetic resonance imaging equipment, including patient monitors designed to be used within this sphere, or (b) magnetic fields within 1 m distance from the external surfaces of cyclotron magnets, magnets for beam transport and beam direction control applied for particle therapy. Expires on 30 June 2020.’

Implementing measures in the Member States

Transposition links come from the Member States’ notifications published on EUR-Lex. Only high-confidence matches held on LawPlayer are listed; see EUR-Lex for the complete list.

Other acts of the same type
Council Directive 87/372/EEC of 25 June 1987 on the frequency bands to be reserved for the coordinated introduction of public pan-European cellular digital land-based mobile communications in the CommunityCouncil Directive 87/287/EEC of 26 May 1987 on the synchronization of general population censuses in 1991Council Directive 87/217/EEC of 19 March 1987 on the prevention and reduction of environmental pollution by asbestosCommission Directive 87/143/EEC of 10 February 1987 amending the first Directive 80/1335/EEC on the approximation of the laws of the Member States relating to methods of analysis necessary for checking the composition of cosmetic productsCommission Directive 87/120/EEC of 14 January 1987 amending various Council Directives on the marketing of seeds and propagating materialsCouncil Directive 86/653/EEC of 18 December 1986 on the coordination of the laws of the Member States relating to self-employed commercial agentsCouncil Directive 86/655/EEC of 18 December 1986 concerning the Community list of less-favoured farming areas within the meaning of Directive 75/268/EEC (France)Council Directive 87/54/EEC of 16 December 1986 on the legal protection of topographies of semiconductor productsCouncil Directive 86/635/EEC of 8 December 1986 on the annual accounts and consolidated accounts of banks and other financial institutionsThirteenth Council Directive 86/560/EEC of 17 November 1986 on the harmonization of the laws of the Member States relating to turnover taxes - Arrangements for the refund of value added tax to taxable persons not established in Community territoryFirst Commission Directive 86/424/EEC of 15 July 1986 laying down methods of sampling for chemical analysis of edible caseins and caseinatesCouncil Directive 86/465/EEC of 14 July 1986 concerning the Community list of less-favoured farming areas within the meaning of Directive 75/268/EEC (Germany)

Source: EUR-Lex (Publications Office of the EU), © European Union, reuse permitted under Commission Decision 2011/833/EU.

Contents

What to look at next