Article 1
Bis(N-cyclohexyl-diazenium-dioxy)-copper (Cu-HDO) shall be approved as an active substance for use in biocidal products for product-type 8, subject to the specifications and conditions set out in the Annex.
Commission Implementing Regulation (EU) No 89/2014 of 31 January 2014 approving bis(N-cyclohexyl-diazenium-dioxy)-copper (Cu-HDO) as an existing active substance for use in biocidal products for product-type 8 Text with EEA relevance
Data as of 2026-07-04 · Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗
Bis(N-cyclohexyl-diazenium-dioxy)-copper (Cu-HDO) shall be approved as an active substance for use in biocidal products for product-type 8, subject to the specifications and conditions set out in the Annex.
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union .
ANNEX Common Name IUPAC Name Identification Numbers Minimum degree of purity of the active substance ( 1 ) Date of approval Expiry date of approval Product type Specific conditions ( 2 ) Cu-HDO IUPAC Name: bis(N-cyclohexyl-diazenium-dioxy)-copper EC n o : N/A CAS n o : 312600-89-8 981 g/kg 1 September 2015 31 August 2025 8 The product assessment shall pay particular attention to the exposures, the risks and the efficacy linked to any uses covered by an application for authorisation, but not addressed in the Union level risk assessment of the active substance. Authorisations are subject to the following conditions: 1. For industrial users, safe operational procedures and appropriate organisational measures shall be established. Where exposure cannot be reduced to an acceptable level by other means, products shall be used with appropriate personal protective equipment. 2. Appropriate risk mitigation measures shall be taken to protect the terrestrial compartment. In particular, labels and, where provided, safety data sheets of products authorised shall indicate that industrial application shall be conducted within a contained area or on impermeable hard standing with bunding, that freshly treated timber shall be stored after treatment under shelter or on impermeable hard standing, or both, to prevent direct losses to soil or water, and that any losses from the application of the product shall be collected for reuse or disposal. ( 1 ) The purity indicated in this column was the minimum degree of purity of the active substance used for the evaluation made in accordance with Article 8 of Regulation (EU) No 528/2012. The active substance in the product placed on the market can be of equal or different purity if it has been proven technically equivalent with the evaluated active substance. ( 2 ) For the implementation of the common principles of Annex VI to Regulation (EU) No 528/2012, the content and conclusions of assessment reports are available on the Commission website: http://ec.europa.eu/comm/environment/biocides/index.htm
Source: EUR-Lex (Publications Office of the EU), © European Union, reuse permitted under Commission Decision 2011/833/EU.