Commission Implementing Decision (EU) 2015/16 of 6 January 2015 on the publication with a restriction in the Official Journal of the European Union of the reference of standard EN 1870-17:2012 on manual horizontal cutting cross-cut sawing machines with one saw unit under Directive 2006/42/EC of the European Parliament and of the Council Text with EEA relevance
Data as of 2026-07-04 · Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗
The reference of standard EN 1870-17:2012 ‘Safety of woodworking machines — Circular sawing machines — Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws)’ shall be published in the Official Journal of the European Union with restriciton as set out in the Annex.
This Decision shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union .
COMMISSION COMMUNICATION IN THE FRAMEWORK OF THE IMPLEMENTATION OF THE DIRECTIVE 2006/42/EC
ANNEX COMMISSION COMMUNICATION IN THE FRAMEWORK OF THE IMPLEMENTATION OF THE DIRECTIVE 2006/42/EC (Publication of titles and references of harmonised standards under Union harmonisation legislation) ESO ( 1 ) Reference and title of the harmonised standard (and reference document) First publication OJ Reference of superseded standard Date of cessation of presumption of conformity of superseded standard Note 1 CEN EN 1870-17:2012 Safety of woodworking machines — Circular sawing machines — Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (manual radial arm saws) This is the first publication EN 1870-17:2007 + A2:2009 Note 2 The date of this publication Warning: With regards to the choice of guards of the saw blade, this publication does not concern paragraphs 3 of clauses 5.3.6.1 of this standard, the application of which does not confer a presumption of conformity to the essential health and safety requirements 1.4.2 of Annex I to Directive 2006/42/EC. Note 1: Generally the date of cessation of presumption of conformity will be the date of withdrawal (‘dow’), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise. Note 2: The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. ( 1 ) ESO: European Standardisation Organisation: — CEN: Avenue Marnix 17, B-1000, Brussels, Tel.+32 2 5500811; fax + 32 2 5500819 (http://www.cen.eu)
Source: EUR-Lex (Publications Office of the EU), © European Union, reuse permitted under Commission Decision 2011/833/EU.