Commission Implementing Decision (EU) 2015/2181 of 24 November 2015 on the publication with restriction in the Official Journal of the European Union of the reference to standard EN 795:2012 on ‘Personal fall protection equipment — Anchor devices’ under Regulation (EU) No 1025/2012 of the European Parliament and of the Council (Text with EEA relevance)

• CELEX: Implementing Decision (EU) 2015/2181
• Articles: 3

Article 1

The reference of standard EN 795:2012 ‘Personal fall protection equipment — Anchor devices’ shall be published in the Official Journal of the European Union with restriction as set out in the Annex.

Article 2

This Decision shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union .

Schedules & Appendices

ANNEX

ANNEX

PUBLICATION OF TITLES AND REFERENCES OF EUROPEAN HARMONISED STANDARDS UNDER DIRECTIVE 89/686/EEC

ESO  ( 1 )

Reference and title of the harmonised standard

(and reference document)

First publication OJ

Reference of superseded standard

Date of cessation of presumption of conformity of superseded standard

Note 1

CEN

EN 795:2012

Personal fall protection equipment — Anchor devices

This is the first publication

EN 795:1996

Warning: This publication does not concern the equipment described in:

—

type A (anchor devices with one or more stationary anchor points and with the need for structural anchors or fixing elements to fix to the structure) referred to in clauses 3.2.1, 4.4.1, 5.3,

—

type C (anchor devices employing horizontal flexible anchor lines) referred to in clauses 3.2.3, 4.4.3 and 5.5,

—

type D (anchor devices employing horizontal rigid anchor lines) referred to in clauses 3.2.4, 4.4.4 and 5.6,

—

any combination of the above.

In respect of types A, C and D, this publication does not concern either clauses: 4.5, 5.2.2, 6, 7; Annex A or Annex ZA.

Accordingly, in respect of the equipment mentioned above, there shall be no presumption of conformity with the provisions of Directive 89/686/EEC because they are not considered to be PPE.

Note:

Generally the date of cessation of presumption of conformity will be the date of withdrawal ('dow'), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise.

( 1 )   ESO: European standardisation organisation:

—

CEN: Avenue Marnix 17, 1000 Brussels, Belgium; tel.[phone]; fax [phone] (http://www.cen.eu)

—

Cenelec: Avenue Marnix 17, 1000 Brussels, Belgium; tel.[phone]; fax [phone] (http://www.cenelec.eu)

—

ETSI: 650 route des Lucioles, 06921 Sophia Antipolis, France; tel.[phone]; fax [phone], (http://www.etsi.eu)