Source

Commission Implementing Regulation (EU) 2016/131 of 1 February 2016 approving C(M)IT/MIT (3:1) as an existing active substance for use in biocidal products for product-types 2, 4, 6, 11, 12 and 13 (Text with EEA relevance)

Implementing Regulation (EU) 2016/131 · Regulation · 3 articles

Data as of 2026-07-04 · Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗

Article 1

Open ↗

C(M)IT/MIT (3:1) is approved as an active substance for use in biocidal products for product-types 2, 4, 6, 11, 12 and 13, subject to the specifications and conditions set out in the Annex.

Article 2

Open ↗

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union .

Supplementary provisions

ANNEXSupplementary provisions

Open ↗

ANNEX Common Name IUPAC Name Identification Numbers Minimum degree of purity of the active substance ( 1 ) Date of approval Expiry date of approval Product type Specific conditions C(M)IT/MIT (3:1) IUPAC Name: Reaction mass of 5-chloro-2-methyl-2h-isothiazol-3-one and 2-methyl-2h-isothiazol-3-one (3:1) EC No: n/a CAS No: 55965-84-9 579 g/kg (theoretical calculated dry weight). The active substance is manufactured as a technical concentrate (TK) with different solvents and stabilisers. 1 July 2017 30 June 2027 2 The product assessment shall pay particular attention to the exposures, the risks and the efficacy linked to any uses covered by an application for authorisation, but not addressed in the Union level risk assessment of the active substance. The authorisations of biocidal products are subject to the following condition: For professional users, safe operational procedures and appropriate organisational measures shall be established. Products shall be used with appropriate personal protective equipment where exposure cannot be reduced to an acceptable level by other means. The placing on the market of treated articles is subject to the following condition: The person responsible for the placing on the market of a treated article treated with or incorporating C(M)IT/MIT (3:1) shall ensure that the label of that treated article provides the information listed in the second subparagraph of Article 58(3) of Regulation (EU) No 528/2012. 4 The product assessment shall pay particular attention to the exposures, the risks and the efficacy linked to any uses covered by an application for authorisation, but not addressed in the Union level risk assessment of the active substance. The authorisations of biocidal products are subject to the following conditions: (1) For professional users, safe operational procedures and appropriate organisational measures shall be established. Products shall be used with appropriate personal protective equipment where exposure cannot be reduced to an acceptable level by other means. (2) In view of the risks identified for professional users, biocidal products shall only be loaded by automated systems, unless it can be demonstrated that risks can be reduced to an acceptable level by other means. (3) For products that may lead to residues in food or feed, the need to set new or to amend existing maximum residue levels (MRLs) in accordance with Regulation (EC) No 470/2009 of the European Parliament and of the Council ( 2 ) or Regulation (EC) No 396/2005 of the European Parliament and of the Council ( 3 ) shall be verified, and any appropriate risk mitigation measures shall be taken to ensure that the applicable MRLs are not exceeded. (4) Products shall not be incorporated in materials and articles intended to come into contact with food within the meaning of Article 1(1) of Regulation (EC) No 1935/2004, unless the Commission has established specific limits on the migration of C(M)IT/MIT (3:1) into food or it has been established pursuant to that Regulation that such limits are not necessary. The placing on the market of treated articles is subject to the following condition: The person responsible for the placing on the market of a treated article treated with or incorporating C(M)IT/MIT (3:1) shall ensure that the label of that treated article provides the information listed in the second subparagraph of Article 58(3) of Regulation (EU) No 528/2012. 6 The product assessment shall pay particular attention to the exposures, the risks and the efficacy linked to any uses covered by an application for authorisation, but not addressed in the Union level risk assessment of the active substance. The authorisations of biocidal products are subject to the following conditions: (1) For industrial or professional users, safe operational procedures and appropriate organisational measures shall be established. Products shall be used with appropriate personal protective equipment where exposure cannot be reduced to an acceptable level by other means. (2) In view of the risks to the environment, biocidal products shall not be used to preserve pulp and paper processing fluids, unless it can be demonstrated that risks can be reduced to an acceptable level. The placing on the market of treated articles is subject to the following conditions: (1) In view of the risks identified for human health, mixtures treated with or incorporating C(M)IT/MIT (3:1) and placed on the market for use by the general public shall not contain C(M)IT/MIT (3:1) at a concentration triggering classification as skin sensitiser, unless exposure can be avoided by other means than the wearing of personal protective equipment. (2) In view of the risks identified for human health, liquid detergents treated with or incorporating C(M)IT/MIT (3:1) and placed on the market for use by professional users shall not contain C(M)IT/MIT (3:1) at a concentration triggering classification as skin sensitiser, unless exposure can be avoided by other means than the wearing of personal protective equipment. (3) In view of the risks identified for human health, mixtures treated with or incorporating C(M)IT/MIT (3:1), other than liquid detergents, and placed on the market for use by professional users shall not contain C(M)IT/MIT (3:1) at a concentration triggering classification as skin sensitiser, unless exposure can be avoided, including by the wearing of personal protective equipment. (4) The person responsible for the placing on the market of a treated article treated with or incorporating C(M)IT/MIT (3:1) shall ensure that the label of that treated article provides the information listed in the second subparagraph of Article 58(3) of Regulation (EU) No 528/2012. 11 The product assessment shall pay particular attention to the exposures, the risks and the efficacy linked to any uses covered by an application for authorisation, but not addressed in the Union level risk assessment of the active substance. The authorisations of biocidal products are subject to the following conditions: (1) For professional users, safe operational procedures and appropriate organisational measures shall be established. Products shall be used with appropriate personal protective equipment where exposure cannot be reduced to an acceptable level by other means. (2) In view of the risks identified for the environment, products shall not be authorised for the preservation of photographic processing liquid, preservation of wood treatment solution and for the use in large open recirculating cooling systems unless it can be demonstrated that risks can be reduced to an acceptable level. (3) In view of risks identified for the environment, and unless it can be demonstrated that risks can be reduced to an acceptable level, labels and, where provided, safety data sheet of products shall indicate that: (a) For uses in small open recirculating cooling systems, risk mitigation measures shall be in place to reduce the direct contamination of terrestrial compartment via air deposition. (b) For uses other than those specified under condition (2), release of waste water from the facilities shall be directed to a sewage treatment plant. The placing on the market of treated articles is subject to the following condition: The person responsible for the placing on the market of a treated article treated with or incorporating C(M)IT/MIT (3:1) shall ensure that the label of that treated article provides the information listed in the second subparagraph of Article 58(3) of Regulation (EU) No 528/2012. 12 The product assessment shall pay particular attention to the exposures, the risks and the efficacy linked to any uses covered by an application for authorisation, but not addressed in the Union level risk assessment of the active substance. The authorisations of biocidal products are subject to the following conditions: (1) For professional users, safe operational procedures and appropriate organisational measures shall be established. Products shall be used with appropriate personal protective equipment where exposure cannot be reduced to an acceptable level by other means. (2) In view of the risks identified for the environment, products shall not be authorised for use in off-shore installations, unless it can be demonstrated that risks can be reduced to an acceptable level. (3) In view of the risks identified for human health, labels or safety data sheets of products authorised for off-shore installations shall indicate that drilling mud shall not contain C(M)IT/MIT (3:1) at a concentration triggering classification as skin sensitiser, unless safe operational procedures and appropriate organisational measures can be established for workers. (4) In view of the risks identified for the environment, labels or safety data sheets of products authorised for use in paper mills shall indicate the need for an appropriate dilution of the industrial release from the facilities into the watercourse after mechanical/chemical treatment or after treatment in a sewage treatment plant, unless it can be demonstrated that risks can be reduced to an acceptable level by other means. The placing on the market of treated articles is subject to the following condition: The person responsible for the placing on the market of a treated article treated with or incorporating C(M)IT/MIT (3:1) shall ensure that the label of that treated article provides the information listed in the second subparagraph of Article 58(3) of Regulation (EU) No 528/2012. 13 The product assessment shall pay particular attention to the exposures, the risks and the efficacy linked to any uses covered by an application for authorisation, but not addressed in the Union level risk assessment of the active substance. The authorisations of biocidal products are subject to the following conditions: (1) For professional users, safe operational procedures and appropriate organisational measures shall be established. Products shall be used with appropriate personal protective equipment where exposure cannot be reduced to an acceptable level by other means. (2) In view of the risks identified for professional users, loading of the products into metalworking fluids shall be semi-automated or automated, unless it can be demonstrated that risks can be reduced to an acceptable level by other means. (3) In view of the risks identified for professional users, labels and, where provided, safety data sheets shall indicate that the products shall not be used in metal working fluids at a concentration triggering classification as skin sensitiser, unless it can be demonstrated that risks can be reduced to an acceptable level by other means. The placing on the market of treated articles is subject to the following condition: The person responsible for the placing on the market of a treated article treated with or incorporating C(M)IT/MIT (3:1) shall ensure that the label of that treated article provides the information listed in the second subparagraph of Article 58(3) of Regulation (EU) No 528/2012. ( 1 ) The purity indicated in this column was the minimum degree of purity of the active substance used for the evaluation made in accordance with Article 16(2) of Directive 98/8/EC. The active substance in the product placed on the market can be of equal or different purity if it has been proven technically equivalent with the evaluated active substance. ( 2 ) Regulation (EC) No 470/2009 of the European Parliament and of the Council of 6 May 2009 laying down Community procedures for the establishment of residue limits of pharmacologically active substances in foodstuffs of animal origin, repealing Council Regulation (EEC) No 2377/90 and amending Directive 2001/82/EC of the European Parliament and of the Council and Regulation (EC) No 726/2004 of the European Parliament and of the Council ( OJ L 152, 16.6.2009, p. 11 ). ( 3 ) Regulation (EC) No 396/2005 of the European Parliament and of the Council of 23 February 2005 on maximum residue levels of pesticides in or on food and feed of plant and animal origin and amending Council Directive 91/414/EEC ( OJ L 70, 16.3.2005, p. 1 ).

Other acts of the same type

Source: EUR-Lex (Publications Office of the EU), © European Union, reuse permitted under Commission Decision 2011/833/EU.

What to look at next

Browse all EU Legal ActsEvery instrument by type and year, full text free to read section by sectionEuropean Union legislation EU Legal Acts by type and yearGrouped by instrument type and year of enactment, so you can find others of the same kindBrowse by type and year European Union: what this database coversWhich datasets are here, which official source they come from, and how current they areEuropean Union overview