My bookmarksSign up free
Source

Commission Implementing Regulation (EU) 2016/2225 of 5 December 2016 concerning the classification of certain goods in the Combined Nomenclature

Commission Implementing Regulation (EU) 2016/2225 of 5 December 2016 concerning the classification of certain goods in the Combined Nomenclature

Implementing Regulation (EU) 2016/2225 · Regulation · 4 articles

Data as of 2026-07-04 · Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗

Article 1

Open ↗

The goods described in column (1) of the table set out in the Annex shall be classified within the Combined Nomenclature under the CN code indicated in column (2) of that table.

Article 2

Open ↗

Binding tariff information which does not conform to this Regulation may continue to be invoked in accordance with Article 34(9) of Regulation (EU) No 952/2013 for a period of three months from the date of entry into force of this Regulation.

Article 3

Open ↗

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union .

Supplementary provisions

ANNEXSupplementary provisions

Open ↗

ANNEX Description of the goods Classification (CN code) Reasons (1) (2) (3) A cylindrical article predominantly made of steel (other than of cast steel) of a length of approximately 35 cm and a diameter of approximately 19 cm at its widest point (so-called ‘track roller’). It consists of the following main components: a cylindrical shell with a graduated cage for the chain guide; a highly polished shaft, and two bronze bushings and collars at both ends. The article is designed for use with the track chain of a crawler type excavator in conjunction with other similar track rollers for longitudinal and lateral guidance of the track chain. See image  ( *1 ) 8431 49 80 Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature (CN), note 2(b) to Section XVI, and by the wording of CN codes 8431 , 8431 49 and 8431 49 80 . Classification under heading 8708 as parts or accessories of the motor vehicles of headings 8701 to 8705 is excluded as the article is not designed for use with motor vehicles of those headings. The objective characteristics of the article (size and shape) are those of a track roller designed for use with the track chain of a crawler type excavator of heading 8429 . The article is therefore to be classified under CN code 8431 49 80 as parts suitable for use solely or principally with the machinery of headings 8425 to 8430 other than of cast steel. ( *1 )   The image is purely for information.

Other acts of the same type
Commission Implementing Regulation (EU) 2021/247 of 11 February 2021 entering a name in the register of protected designations of origin and protected geographical indications ‘Liptovské droby’ (PGI)Commission Implementing Regulation (EU) 2021/248 of 11 February 2021 approving Union amendments to the specification for a Protected Designation of Origin or a Protected Geographical Indication (‘Venezia’ (PDO))Commission Delegated Regulation (EU) 2021/517 of 11 February 2021 amending Delegated Regulation (EU) 2017/2361 as regards the arrangements for the payment of contributions to the administrative expenditures of the Single Resolution BoardCommission Delegated Regulation (EU) 2021/539 of 11 February 2021 amending Delegated Regulation (EU) No 1222/2014 supplementing Directive 2013/36/EU of the European Parliament and of the Council with regard to regulatory technical standards for the specification of the methodology for the identification of global systemically important institutions and for the definition of subcategories of global systemically important institutions (Text with EEA relevance)Regulation (EU) 2021/167 of the European Parliament and of the Council of 10 February 2021 amending Regulation (EU) No 654/2014 concerning the exercise of the Union’s rights for the application and enforcement of international trade rulesRegulation (EU) 2021/168 of the European Parliament and of the Council of 10 February 2021 amending Regulation (EU) 2016/1011 as regards the exemption of certain third-country spot foreign exchange benchmarks and the designation of replacements for certain benchmarks in cessation, and amending Regulation (EU) No 648/2012 (Text with EEA relevance)Regulation (EU) 2021/177 of the European Parliament and of the Council of 10 February 2021 amending Regulation (EU) No 223/2014 as regards the introduction of specific measures for addressing the crisis associated with the outbreak of COVID-19Regulation (EU) 2021/240 of the European Parliament and of the Council of 10 February 2021 establishing a Technical Support InstrumentCommission Delegated Regulation (EU) 2021/652 of 10 February 2021 amending Delegated Regulation (EU) 2017/891 as regards the activities and operational programmes of producer organisations in the fruit and vegetables sectorCommission Regulation (EU) 2021/155 of 9 February 2021 amending Annexes II, III and V to Regulation (EC) No 396/2005 of the European Parliament and of the Council as regards maximum residue levels for carbon tetrachloride, chlorothalonil, chlorpropham, dimethoate, ethoprophos, fenamidone, methiocarb, omethoate, propiconazole and pymetrozine in or on certain products (Text with EEA relevance)Commission Implementing Regulation (EU) 2021/170 of 9 February 2021 concerning the classification of certain goods in the Combined NomenclatureCommission Implementing Regulation (EU) 2021/180 of 9 February 2021 entering a name in the register of protected designations of origin and protected geographical indications [‘Dalmatinska pečenica’ (PGI)]

Source: EUR-Lex (Publications Office of the EU), © European Union, reuse permitted under Commission Decision 2011/833/EU.

Contents

What to look at next