My bookmarksSign up free

Commission Implementing Regulation (EU) 2017/1275 of 14 July 2017 approving active chlorine released from chlorine as an existing active substance for use in biocidal products of product-types 2 and 5 (Text with EEA relevance. )

Commission Implementing Regulation (EU) 2017/1275 of 14 July 2017 approving active chlorine released from chlorine as an existing active substance for use in biocidal products of product-types 2 and 5 (Text with EEA relevance. )

Implementing Regulation (EU) 2017/1275 · Regulation · 3 articles

Data as of 2026-07-04 · Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗

Article 1

Active chlorine released from chlorine is approved as an active substance for use in biocidal products of product-types 2 and 5, subject to the specifications and conditions set out in the Annex.

Article 2

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union .

Supplementary provisions

ANNEXSupplementary provisions

ANNEX Common Name IUPAC Name Identification Numbers Minimum degree of purity of the active substance  ( 1 ) Date of approval Expiry date of approval Product type Specific conditions Active chlorine released from chlorine (hereafter referred to as ‘chlorine’). IUPAC Name: Chlorine EC No: 231-959-5 CAS No: 7782-50-5 Minimum purity of the releaser chlorine: ≥ 995 g/kg (i.e. ≥ 99,5 % w/w) 1 January 2019 31 December 2028 2 The authorisations of biocidal products are subject to the following conditions: 1. The product assessment shall pay particular attention to the exposures, the risks and the efficacy linked to any use covered by an application for authorisation, but not addressed in the Union-level risk assessment of the active substance. 2. In view of the risks identified for the uses assessed, the product assessment shall pay particular attention to: (a) professional users; (b) surface water and sediment for disinfection of sewage/waste water in the effluent stream of the sewage treatment plant (post-chlorination). 5 The authorisations of biocidal products are subject to the following conditions: 1. The product assessment shall pay particular attention to the exposures, the risks and the efficacy linked to any use covered by an application for authorisation, but not addressed in the Union-level risk assessment of the active substance. 2. In view of the risks identified for the uses assessed, the product assessment shall pay particular attention to professional users. 3. For products that may lead to residues in food or feed, the need to set new or to amend existing maximum residue levels (MRLs) in accordance with Regulation (EC) No 470/2009 of the European Parliament and of the Council  ( 2 ) or Regulation (EC) No 396/2005 of the European Parliament and of the Council  ( 3 ) shall be verified, and any appropriate risk mitigation measures shall be taken to ensure that the applicable MRLs are not exceeded. ( 1 )   The purity indicated in this column was the minimum degree of purity of the active substance evaluated. The active substance in the product placed on the market can be of equal or different purity if it has been proven to be technically equivalent to the evaluated active substance. ( 2 )   Regulation (EC) No 470/2009 of the European Parliament and of the Council of 6 May 2009 laying down Community procedures for the establishment of residue limits of pharmacologically active substances in foodstuffs of animal origin, repealing Council Regulation (EEC) No 2377/90 and amending Directive 2001/82/EC of the European Parliament and of the Council and Regulation (EC) No 726/2004 of the European Parliament and of the Council ( OJ L 152, 16.6.2009, p. 11 ). ( 3 )   Regulation (EC) No 396/2005 of the European Parliament and of the Council of 23 February 2005 on maximum residue levels of pesticides in or on food and feed of plant and animal origin and amending Council Directive 91/414/EEC ( OJ L 70, 16.3.2005, p. 1 ).

Other acts of the same type
Commission Implementing Regulation (EU) 2019/1684 of 2 October 2019 approving non-minor amendments to the specification for a name entered in the register of protected designations of origin and protected geographical indications (Banon (PDO))Commission Implementing Regulation (EU) 2019/1670 of 1 October 2019 approving non-minor amendments to the specification for a name entered in the register of protected designations of origin and protected geographical indications Grana Padano (PDO)Commission Implementing Regulation (EU) 2019/1746 of 1 October 2019 amending Implementing Regulation (EU) 2017/1185 laying down rules for the application of Regulations (EU) No 1307/2013 and (EU) No 1308/2013 of the European Parliament and of the Council as regards notifications to the Commission of information and documents (Text with EEA relevance)Commission Regulation (EU) 2019/1781 of 1 October 2019 laying down ecodesign requirements for electric motors and variable speed drives pursuant to Directive 2009/125/EC of the European Parliament and of the Council, amending Regulation (EC) No 641/2009 with regard to ecodesign requirements for glandless standalone circulators and glandless circulators integrated in products and repealing Commission Regulation (EC) No 640/2009 (Text with EEA relevance)Commission Regulation (EU) 2019/1782 of 1 October 2019 laying down ecodesign requirements for external power supplies pursuant to Directive 2009/125/EC of the European Parliament and of the Council and repealing Commission Regulation (EC) No 278/2009 (Text with EEA relevance)Commission Regulation (EU) 2019/1783 of 1 October 2019 amending Regulation (EU) No 548/2014 on implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to small, medium and large power transformers (Text with EEA relevance)Commission Regulation (EU) 2019/1784 of 1 October 2019 laying down ecodesign requirements for welding equipment pursuant to Directive 2009/125/EC of the European Parliament and of the Council (Text with EEA relevance)Commission Regulation (EU) 2019/2019 of 1 October 2019 laying down ecodesign requirements for refrigerating appliances pursuant to Directive 2009/125/EC of the European Parliament and of the Council and repealing Commission Regulation (EC) No 643/2009 (Text with EEA relevance.)Commission Regulation (EU) 2019/2020 of 1 October 2019 laying down ecodesign requirements for light sources and separate control gears pursuant to Directive 2009/125/EC of the European Parliament and of the Council and repealing Commission Regulations (EC) No 244/2009, (EC) No 245/2009 and (EU) No 1194/2012 (Text with EEA relevance.)Commission Regulation (EU) 2019/2021 of 1 October 2019 laying down ecodesign requirements for electronic displays pursuant to Directive 2009/125/EC of the European Parliament and of the Council, amending Commission Regulation (EC) No 1275/2008 and repealing Commission Regulation (EC) No 642/2009 (Text with EEA relevance.)Commission Regulation (EU) 2019/2022 of 1 October 2019 laying down ecodesign requirements for household dishwashers pursuant to Directive 2009/125/EC of the European Parliament and of the Council amending Commission Regulation (EC) No 1275/2008 and repealing Commission Regulation (EU) No 1016/2010 (Text with EEA relevance.)Commission Regulation (EU) 2019/2023 of 1 October 2019 laying down ecodesign requirements for household washing machines and household washer-dryers pursuant to Directive 2009/125/EC of the European Parliament and of the Council, amending Commission Regulation (EC) No 1275/2008 and repealing Commission Regulation (EU) No 1015/2010 (Text with EEA relevance.)

Source: EUR-Lex (Publications Office of the EU), © European Union, reuse permitted under Commission Decision 2011/833/EU.

Contents

What to look at next