Commission Implementing Regulation (EU) 2018/246 of 15 February 2018 concerning the authorisation of linalool oxide as a feed additive for all animal species except fish (Text with EEA relevance. )
Data as of 2026-07-04 · Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗
Authorisation
The substance specified in the Annex, belonging to the additive category ‘sensory additives’ and to the functional group ‘flavouring compounds’, is authorised as a feed additive in animal nutrition subject to the conditions laid down in that Annex.
Transitional measures
1. The substance specified in the Annex and premixtures containing that substance, which are produced and labelled before 15 September 2018 in accordance with the rules applicable before 15 March 2018 may continue to be placed on the market and used until the existing stocks are exhausted. 2. Feed materials and compound feed containing the substance as specified in the Annex which are produced and labelled before 15 March 2019 in accordance with the rules applicable before 15 March 2018 may continue to be placed on the market and used until the existing stocks are exhausted if they are intended for food-producing animals. 3. Feed materials and compound feed containing the substance as specified in the Annex which are produced and labelled before 15 March 2020 in accordance with the rules applicable before 15 March 2018 may continue to be placed on the market and used until the existing stocks are exhausted if they are intended for non-food-producing animals.
Entry into force
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union .
ANNEX Identification number of the additive Name of the holder of authorisation Additive Composition, chemical formula, description, analytical method Species or category of animal Maximum age Minimum content Maximum content Other provisions End of period of authorisation mg of active substance/kg of complete feedingstuff with a moisture content of 12 % Category: Sensory additives. Functional group: Flavouring compounds 2b13140 — Linalool oxide Additive composition Linalool oxide Characterisation of the active substance Produced by chemical synthesis Purity: min. 95 % assay Chemical formula: C 10 H 18 O 2 CAS number: 1365-19-1 FLAVIS No: 13.140 Method of analysis ( 1 ) For the determination of linalool oxide in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species except fish — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: — 0,3 mg/kg for pigs and poultry, — 0,5 mg/kg for other species and categories except fish.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use levels suggested on the label of the premixture would result in exceeding the levels referred to in point 3. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated in the labelling of feed materials and compound feedingstuffs where the content of the active substance in the complete feedingstuff with a moisture content of 12 % exceeds: — 0,3 mg/kg for pigs and poultry, — 0,5 mg/kg for other species and categories except fish. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 15.3.2028 ( 1 ) Details of the analytical methods are available at the following address of the Reference Laboratory: https://ec.europa.eu/jrc/en/eurl/feed-additives/evaluation-reports
Source: EUR-Lex (Publications Office of the EU), © European Union, reuse permitted under Commission Decision 2011/833/EU.