Article 1
Open ↗The goods described in column (1) of the table set out in the Annex shall be classified within the Combined Nomenclature under the CN code indicated in column (2) of that table.
Source
Commission Implementing Regulation (EU) 2018/1207 of 27 August 2018 concerning the classification of certain goods in the Combined Nomenclature
Commission Implementing Regulation (EU) 2018/1207 of 27 August 2018 concerning the classification of certain goods in the Combined Nomenclature
Data as of 2026-07-04 · Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗
Article 2
Open ↗Binding tariff information which does not conform to this Regulation may continue to be invoked in accordance with Article 34(9) of Regulation (EU) No 952/2013 for a period of three months from the date of entry into force of this Regulation.
Article 3
Open ↗This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union .
Supplementary provisions
ANNEXSupplementary provisions
Open ↗ANNEX Description of the goods Classification (CN code) Reasons (1) (2) (3) An article made of hot rolled non-alloy steel with a coating made of nickel silver alloy. It is presented in the shape of a round cap (diameter 2,7 cm) with slightly lowered centre, turned down into a hole, with small air gaps inside the turned down part. The cap is connected to a hollow threaded shank (diameter 0,5 cm). The total length of the article is 2,5 cm. The article is designed to be used as a tuning element in a specific bandpass filter (the bandpass filter is used in cellular network base stations to transmit signals of certain frequencies) filtering out the upper and lower frequencies, by screwing it into the bandpass filter chassis. It is an essential part in the process of tuning. In the tuning process the round cap acts as a resonator. In case of any damage to the surface of this round cap there will be a distortion of the radio frequency waves. See image ( *1 ) . 8517 70 00 Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature, Note 2(b) to Section XVI and by the wording of CN codes 8517 and 8517 70 00 . As the function of the article is not to assemble or fasten goods it cannot be classified as a screw or as a bolt. Consequently, it cannot be considered a part of general use as referred to in Note 2 to Section XV. Therefore, classification under heading 7318 is excluded. The article is a part of cellular network base stations within the meaning of Note 2(b) to Section XVI as it is essential for their operation, due to the article's specific design and dimensions, and cannot be used for other purposes (see case C-152/10 Unomedical ECLI:EU:C:2011:402, paragraph 29). Consequently, the article is to be classified under CN code 8517 70 00 as a part of an apparatus for the transmission or reception of voice, images or other data in a wirelesss network. ( *1 ) The image is purely for information.
Other acts of the same type
Council Implementing Regulation (EU) 2022/949 of 20 June 2022 implementing Regulation (EU) 2016/1686 imposing additional restrictive measures directed against ISIL (Da’esh) and Al-Qaeda and natural and legal persons, entities or bodies associated with themCommission Implementing Regulation (EU) 2022/960 of 20 June 2022 correcting the Czech language version of Implementing Regulation (EU) 2015/1502 on setting out minimum technical specifications and procedures for assurance levels for electronic identification means pursuant to Article 8(3) of Regulation (EU) No 910/2014 of the European Parliament and of the Council on electronic identification and trust services for electronic transactions in the internal market (Text with EEA relevance)Commission Implementing Regulation (EU) 2022/961 of 20 June 2022 authorising the placing on the market of tetrahydrocurcuminoids as a novel food and amending Implementing Regulation (EU) 2017/2470 (Text with EEA relevance)Commission Delegated Regulation (EU) 2022/2236 of 20 June 2022 amending Annexes I, II, IV and V to Regulation (EU) 2018/858 of the European Parliament and of the Council as regards the technical requirements for vehicles produced in unlimited series, vehicles produced in small series, fully automated vehicles produced in small series and special purpose vehicles, and as regards software update (Text with EEA relevance)Commission Implementing Regulation (EU) 2022/2581 of 20 June 2022 laying down implementing technical standards for the application of Directive 2013/36/EU of the European Parliament and of the Council with regard to provision of information in applications for authorisation of a credit institution (Text with EEA relevance)Commission Regulation (EU) 2022/943 of 17 June 2022 correcting certain language versions of Annex I to Regulation (EC) No 2195/2002 of the European Parliament and of the Council on the Common Procurement Vocabulary (CPV) (Text with EEA relevance)Commission Implementing Regulation (EU) 2022/944 of 17 June 2022 laying down rules for the application of Regulation (EU) 2017/746 of the European Parliament and of the Council as regards the tasks of and criteria for European Union reference laboratories in the field of in vitro diagnostic medical devices (Text with EEA relevance)Commission Implementing Regulation (EU) 2022/945 of 17 June 2022 laying down rules for the application of Regulation (EU) 2017/746 of the European Parliament and the Council with regard to fees that may be levied by EU reference laboratories in the field of in vitro diagnostic medical devices (Text with EEA relevance)Council Regulation (EU) 2022/972 of 17 June 2022 amending Regulation (EU) 2021/2283 opening and providing for the management of autonomous tariff quotas of the Union for certain agricultural and industrial productsCouncil Regulation (EU) 2022/1008 of 17 June 2022 amending Regulation (EU) 2021/2278 suspending the Common Customs Tariff duties referred to in Article 56(2), point (c), of Regulation (EU) No 952/2013 on certain agricultural and industrial productsCommission Delegated Regulation (EU) 2022/2580 of 17 June 2022 supplementing Directive 2013/36/EU of the European Parliament and of the Council with regard to regulatory technical standards specifying the information to be provided in the application for the authorisation as a credit institution, and specifying the obstacles which may prevent the effective exercise of supervisory functions of competent authorities (Text with EEA relevance)Commission Implementing Regulation (EU) 2022/934 of 16 June 2022 making imports of certain aluminium road wheels originating in Morocco subject to registration
Source: EUR-Lex (Publications Office of the EU), © European Union, reuse permitted under Commission Decision 2011/833/EU.
What to look at next
Browse all EU Legal ActsEvery instrument by type and year, full text free to read section by sectionEuropean Union legislationEU Legal Acts by type and yearGrouped by instrument type and year of enactment, so you can find others of the same kindBrowse by type and yearEuropean Union: what this database coversWhich datasets are here, which official source they come from, and how current they areEuropean Union overview