LawPlayer
My bookmarksSign up freeSign up free
Source

Commission Implementing Regulation (EU) 2018/1287 of 24 September 2018 granting a Union authorisation for the biocidal product family Quat-Chem's iodine based products (Text with EEA relevance.)

Commission Implementing Regulation (EU) 2018/1287 of 24 September 2018 granting a Union authorisation for the biocidal product family Quat-Chem's iodine based products (Text with EEA relevance.)

Implementing Regulation (EU) 2018/1287 · Regulation · 3 articles

In forceLast amended 2023-10-26

Version history

  1. Superseded version
  2. In force

Data as of 2026-11-02 · Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗

Article 1

Open ↗

A Union authorisation is granted to  Neogen Italia S.r.l. for the same biocidal product family Quat-chem's iodine based products with authorisation number EU-0018496-0000. The Union authorisation is valid from 15 October 2018 until 30 September 2028. The Union authorisation is subject to compliance with the SPC set out in the Annex.

Article 2

Open ↗

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union .

Supplementary provisions

Summary of product characteristics for a biocidal product family

ANNEXSupplementary provisions

Open ↗

ANNEX Summary of product characteristics for a biocidal product family QUAT-CHEM’s iodine based products Product type 3 – Veterinary hygiene (Disinfectants) Authorisation number: EU-0018496-0000 R4BP asset number: EU-0018496-0000 PART I FIRST INFORMATION LEVEL 1.    ADMINISTRATIVE INFORMATION 1.1.    Family name Name QUAT-CHEM’s iodine based products 1.2.    Product type(s) Product type(s) PT03 – Veterinary hygiene (Disinfectants) 1.3.    Authorisation holder Name and address of the authorisation holder Name Neogen Italia S.r.l. Address Via Agnello 8, 20121 Milano, Italy Authorisation number EU-0018496-0000 R4BP asset number EU-0018496-0000 Date of the authorisation 15 October 2018 Expiry date of the authorisation 30 September 2028 1.4.    Manufacturer(s) of the biocidal products Name of manufacturer QUAT-CHEM LTD Address of manufacturer Charter House 33 – Greek Street, SK3 8AX Stockport United Kingdom Location of manufacturing sites QUAT-CHEM LTD – Charter House 33 – Greek Street, SK3 8AX Stockport United Kingdom 1.5.    Manufacturer(s) of the active substance(s) Active substance Iodine Name of manufacturer COSAYACH: SCM Cía. Cosayach Minera Negreiros, Rut. No 96.625.710-5 Address of manufacturer Terrenos de Elena S/N, Terrenos de Elena S/N Huara, Región de Tarapacá Chile Location of manufacturing sites Mined at: S.C.M. Cía. Minera Negreiros, S.C.M. Cosayach Soledad., Refined at: S.C.M. Cía. Minera Negreiros. Pozo Almonte Chile Active substance Iodine Name of manufacturer ACF MINERA SA Address of manufacturer San Martín, 499 Iquique Chile Location of manufacturing sites Faena Lagunas, KM. 1.722 Ruta A-5, Pozo Almonte Chile Active substance Iodine Name of manufacturer SOCIEDAD QUIMICA y MINERA SA Address of manufacturer Los Militares, 4290 SANTIAGO DE CHILE Chile Location of manufacturing sites Pedro de Valdivia (PV), Route B 180 Antofagasta Chile Nueva Victoria (NV), Route 5 North, Km 1925 Pozo Almonte Chile 2.    PRODUCT FAMILY COMPOSITION AND FORMULATION 2.1.    Qualitative and quantitative information on the composition of the family Common name IUPAC name Function CAS number EC number Content (%) Min Max Iodine   Active Substance 7553-56-2 231-442-4 0,25 2,5 Alcohols, C12-14, ethoxylated (11 mol EO average molar ratio) Poly(oxy-1,2-ethanediyl), -C12-14-(even numbered)-alkyl--hydroxy Non-active substance 68439-50-9   2,697 24,199 2.2.    Type(s) of formulation Formulation(s) AL – Any other liquid SL – Soluble concentrate PART II SECOND INFORMATION LEVEL – META SPC(S) META SPC 1 1.    META SPC 1 ADMINISTRATIVE INFORMATION 1.1.    Meta SPC 1 identifier Identifier meta SPC 1: Dipping products – ready to use 1.2.    Suffix to the authorisation number Number 1-1 1.3.    Product type(s) Product type(s) PT03 – Veterinary hygiene (Disinfectants) 2.    META SPC 1 COMPOSITION 2.1.    Qualitative and quantitative information on the composition of the meta SPC 1 Common name IUPAC name Function CAS number EC number Content (%) Min Max Iodine   Active Substance 7553-56-2 231-442-4 0,25 0,49 Alcohols, C12-14, ethoxylated (11 mol EO average molar ratio) Poly(oxy-1,2-ethanediyl), -C12-14-(even numbered)-alkyl--hydroxy Non-active substance 68439-50-9   2,697 4,993 2.2.    Type(s) of formulation of the meta SPC 1 Formulation(s) AL – Any other liquid 3.    HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 1 Hazard statements Causes serious eye irritation. Harmful to aquatic life with long lasting effects. Precautionary statements Keep out of reach of children. Wash hands thoroughly after handling. Wear protective gloves. Wear protective clothing. Wear eye protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice. Get medical advice. 4.    AUTHORISED USE(S) OF THE META SPC 1 4.1.    Use description Table 1 Use # 1 – Use # 1.1 – Manual or automated dipping after milking Product type PT03 – Veterinary hygiene (Disinfectants) Where relevant, an exact description of the authorised use — Target organism(s) (including development stage) Scientific name: Bacteria Common name: Bacteria Development stage: Scientific name: Yeasts Common name: Yeasts Development stage: Scientific name: Algae Common name: Algae Development stage: Field(s) of use Indoor Disinfection of teats of milk producing animals by dipping after milking Application method(s) Method: Dipping Detailed description: Manual or automated disinfection of teats by dipping after milking. Dipping cup or automated dipping machine. Application rate(s) and frequency Application Rate: – cows and buffaloes (3 to 10 ml: 5 ml recommended) – sheep (1,5 to 5 ml: 1,5 ml recommended) – goats (2,5 to 6 ml: 2,5 ml recommended) Dilution (%): Number and timing of application: Frequency: 2 to 3 times per day Category(ies) of users Professional Pack sizes and packaging material HDPE JERRYCAN 5, 10, 22 L HDPE DRUM 60, 120, 220 L HDPE CONTAINER 1 000  L 4.1.1.    Use-specific instructions for use See general directions for use of meta SPC 1 4.1.2.    Use-specific risk mitigation measures See general directions for use of meta SPC 1 4.1.3.    Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use of meta SPC 1 4.1.4.    Where specific to the use, the instructions for safe disposal of the product and its packaging None: see directions for use meta SPC 1 4.1.5.    Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use of meta SPC 1 5.    GENERAL DIRECTIONS FOR USE  ( 1 ) OF THE META SPC 1 5.1.    Instructions for use Always read the label or leaflet before use and follow all the instructions provided. The product must be brought to a temperature above 20 °C before use. The use of a dosing pump for filling the product into the application equipment is recommended. Fill the dipping cup manually or automatically with the ready to use product. Apply by dipping manually or automatically on animal’s teats on the full length of the teat after milking. —  cows and buffaloes (3 to 10 ml: 5 ml recommended) —  sheep (1,5 to 5 ml: 1,5 ml recommended) —  goats (2,5 to 6 ml: 2,5 ml recommended) Leave the product until next milking. Keep the cows standing until the product has dried (at least 5 minutes). At the next milking, use the teat cleaning and wiping method systematically before attaching the milking cluster. Where necessary, repeat the application after each milking. Clean the application equipment regularly with warm water. 5.2.    Risk mitigation measures Wear eye protection. In case a combination of pre- and post-milking disinfection is necessary, using another biocidal product not containing iodine has to be considered for pre-milking disinfection. 5.3.    Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment Take the contaminated clothes and shoes off immediately. Wash them before wearing them again. FIRST AID INSTRUCTIONS —  In the event of inhalation: Bring to fresh air. —  In the event of contact with the skin: Wash with water. —  In the event of contact with the eyes: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. —  In the event of ingestion: Rinse mouth. Do NOT induce vomiting. Get medical advice. Refer to the safety data sheet available for professional user: it contains an emergency phone number. Large spillage: Mark out, dyke up with an inert absorbant and pump in an emergency tank. Keep in suitable, properly labelled and closed containers for disposal. Never return spills in original containers for re-use. 5.4.    Instructions for safe disposal of the product and its packaging At the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant. The paper towels used for removing the product and drying the teats are disposed in the normal and domestic waste. 5.5.    Conditions of storage and shelf-life of the product under normal conditions of storage Shelf life: 2 years in HDPE Do not store at a temperature higher than 30 °C. 6.    OTHER INFORMATION 7.    THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 1 7.1.    Trade name(s), authorisation number and specific composition of each individual product Trade name(s) Teatsan 2500 Market area: EU   IODO GUARD 2500 Market area: EU Authorisation number EU-0018496-0001 1-1 Common name IUPAC name Function CAS number EC number Content (%) Iodine   Active Substance 7553-56-2 231-442-4 0,25 Alcohols, C12-14, ethoxylated (11 mol EO average molar ratio) Poly(oxy-1,2-ethanediyl), -C12-14-(even numbered)-alkyl--hydroxy Non-active substance 68439-50-9   2,697 META SPC 2 1.    META SPC 2 ADMINISTRATIVE INFORMATION 1.1.    Meta SPC 2 identifier Identifier meta SPC 2: Dipping, foaming, spraying products – Ready to use 1.2.    Suffix to the authorisation number Number 1-2 1.3.    Product type(s) Product type(s) PT03 – Veterinary hygiene (Disinfectants) 2.    META SPC 2 COMPOSITION 2.1.    Qualitative and quantitative information on the composition of the meta SPC 2 Common name IUPAC name Function CAS number EC number Content (%) Min Max Iodine   Active Substance 7553-56-2 231-442-4 0,25 0,49 Alcohols, C12-14, ethoxylated (11 mol EO average molar ratio) Poly(oxy-1,2-ethanediyl), -C12-14-(even numbered)-alkyl--hydroxy Non-active substance 68439-50-9   2,697 4,69 2.2.    Type(s) of formulation of the meta SPC 2 Formulation(s) AL – Any other liquid 3.    HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 2 Hazard statements Causes serious eye irritation. Harmful to aquatic life with long lasting effects. Precautionary statements Keep out of reach of children. Wash hands thoroughly after handling. Wear protective gloves. Wear protective clothing. Wear eye protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice. Get medical advice. 4.    AUTHORISED USE(S) OF THE META SPC 2 4.1.    Use description Table 2 Use # 1 – Use # 2.1 – Manual or automated dipping, foaming or spraying before milking Product type PT03 – Veterinary hygiene (Disinfectants) Where relevant, an exact description of the authorised use — Target organism(s) (including development stage) Scientific name: Bacteria Common name: Bacteria Development stage: Scientific name: Yeasts Common name: Yeasts Development stage: Field(s) of use Indoor Disinfection of teats of milk producing animals by dipping, foaming or spraying before milking Application method(s) Method: Dipping, foaming or spraying before milking Detailed description: Manual or automated disinfection of teats by dipping, foaming or spraying before milking Dipping cup, foaming cup, teat sprayer, automated dipping machine, automated foaming machine or automated spraying machine Application rate(s) and frequency Application Rate: – cows and buffaloes (3 to 10 ml: 5 to 8 ml recommended) – sheep (1,5 to 5 ml: 1,5 to 3 ml recommended) – goats (2,5 to 6 ml: 2,5 to 4 ml recommended) Dilution (%): Number and timing of application: Frequency: 2 to 3 times per day Category(ies) of users Professional Pack sizes and packaging material HDPE JERRYCAN 5, 10, 22 L HDPE DRUM 60, 120, 220 L HDPE CONTAINER 1 000  L 4.1.1.    Use-specific instructions for use Eliminate all visible dirt before applying the product. Manual or automatic dipping/foaming/spraying on animal’s teats on the full length of the teat before milking. Let the product act at least one minute. Use the teat cleaning and wiping method systematically before attaching the milking cluster. See also general instructions for use of meta SPC 2. 4.1.2.    Use-specific risk mitigation measures For manual dipping/foaming application: Wear protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information) / eye protection. For manual spraying applications wear protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information) / protective clothing / eye protection. In case a combination of pre- and post-milking disinfection is necessary, using another biocidal product not containing iodine has to be considered for post-milking disinfection. 4.1.3.    Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use of meta SPC 2 4.1.4.    Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use of meta SPC 2 4.1.5.    Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use of meta SPC 2 4.2.    Use description Table 3 Use # 2 – Use # 2.2 – Manual or automated dipping, foaming or spraying after milking Product type PT03 – Veterinary hygiene (Disinfectants) Where relevant, an exact description of the authorised use — Target organism(s) (including development stage) Scientific name: Bacteria Common name: Bacteria Development stage: Scientific name: Yeasts Common name: Yeasts Development stage: Scientific name: Algae Common name: Algae Development stage: Field(s) of use Indoor Disinfection of teats of milk producing animals by dipping, foaming or spraying after milking Application method(s) Method: Dipping, foaming, spraying after milking Detailed description: Manual or automated disinfection of teats by dipping, foaming or spraying after milking Dipping cup, foaming cup, teat sprayer, automated dipping machine, automated foaming machine or automated spraying machine Application rate(s) and frequency Application Rate: – cows and buffaloes (3 to 10 ml: 5 to 8 ml recommended) – sheep (1,5 to 5 ml: 1,5 to 3 ml recommended) – goats (2,5 to 6 ml: 2,5 to 4 ml recommended) Dilution (%): Number and timing of application: Frequency: 2 to 3 times per day Category(ies) of users Professional Pack sizes and packaging material HDPE JERRYCAN 5, 10, 22 L HDPE DRUM 60, 120, 220 L HDPE CONTAINER 1 000  L 4.2.1.    Use-specific instructions for use Manual or automatic dipping/foaming/spraying on animal’s teats on the full length of the teat after milking. Leave the product until next milking. Keep the cows standing until the product has dried. (at least 5 minutes) At the next milking, use the teat cleaning and wiping method systematically before attaching the milking cluster. See also general instructions for use of meta SPC 2. 4.2.2.    Use-specific risk mitigation measures For manual spraying applications wear protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information) / protective clothing / eye protection. In case a combination of pre- and post-milking disinfection is necessary, using another biocidal product not containing iodine has to be considered for pre-milking disinfection. 4.2.3.    Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use of meta SPC 2 4.2.4.    Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use of meta SPC 2 4.2.5.    Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use of meta SPC 2 5.    GENERAL DIRECTIONS FOR USE  ( 2 ) OF THE META SPC 2 5.1.    Instructions for use See use-specific instructions for each use. Always read the label or leaflet before use and follow all the instructions provided. The product must be brought to a temperature above 20 °C before use. The use of a dosing pump for filling the product into the application equipment is recommended. Fill the dipping/foaming cup/sprayer manually or automatically with the ready to use product. Where necessary repeat the application at each milking Clean the application equipment regularly with warm water. 5.2.    Risk mitigation measures See use-specific risk mitigation measures for each use. 5.3.    Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment Take the contaminated clothes and shoes off immediately. Wash them before wearing them again. FIRST AID INSTRUCTIONS —  In the event of inhalation: Bring to fresh air. —  In the event of contact with the skin: Wash with water. —  In the event of contact with the eyes: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. —  In the event of ingestion: Rinse mouth. Do NOT induce vomiting. Get medical advice. Refer to the safety data sheet available for professional user: it contains an emergency phone number. Large spillage: Mark out, dyke up with an inert absorbant and pump in an emergency tank. Keep in suitable, properly labelled and closed containers for disposal. Never return spills in original containers for re-use. 5.4.    Instructions for safe disposal of the product and its packaging At the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant. The paper towels used for removing the product and drying the teats are disposed in the normal and domestic waste. 5.5.    Conditions of storage and shelf-life of the product under normal conditions of storage Shelf life: 2 years in HDPE Do not store at a temperature higher than 30 °C. 6.    OTHER INFORMATION 7.    THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 2 7.1.    Trade name(s), authorisation number and specific composition of each individual product Trade name(s) Teat Guard 2500 Market area: EU   IODO SPRAY 2500 Market area: EU Authorisation number EU-0018496-0002 1-2 Common name IUPAC name Function CAS number EC number Content (%) Iodine   Active Substance 7553-56-2 231-442-4 0,25 Alcohols, C12-14, ethoxylated (11 mol EO average molar ratio) Poly(oxy-1,2-ethanediyl), -C12-14-(even numbered)-alkyl--hydroxy Non-active substance 68439-50-9   2,697 META SPC 3 1.    META SPC 3 ADMINISTRATIVE INFORMATION 1.1.    Meta SPC 3 identifier Identifier meta SPC 3: Dipping, foaming, spraying concentrated products 1.2.    Suffix to the authorisation number Number 1-3 1.3.    Product type(s) Product type(s) PT03 – Veterinary hygiene (Disinfectants) 2.    META SPC 3 COMPOSITION 2.1.    Qualitative and quantitative information on the composition of the meta SPC 3 Common name IUPAC name Function CAS number EC number Content (%) Min Max Iodine   Active Substance 7553-56-2 231-442-4 2,5 2,5 Alcohols, C12-14, ethoxylated (11 mol EO average molar ratio) Poly(oxy-1,2-ethanediyl), -C12-14-(even numbered)-alkyl--hydroxy Non-active substance 68439-50-9   24,199 24,199 2.2.    Type(s) of formulation of the meta SPC 3 Formulation(s) SL – Soluble concentrate 3.    HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 3 Hazard statements Causes serious eye damage. May cause damage to organs (thyroid) through prolonged or repeated exposure oral. Toxic to aquatic life with long lasting effects. May be corrosive to metals. Precautionary statements Keep out of reach of children. Do not breathe mist. Do not breathe vapours. Do not breathe spray. Wash hands thoroughly after handling. Wear protective gloves. Wear protective clothing. Wear eye protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a poison center / doctor. Get medical advice if you feel unwell. Get medical attention if you feel unwell. Dispose of contents to in accordance with local/regional/national/international regulations. Dispose of container to in accordance with local/regional/national/international regulations. Keep only in original packaging. Absorb spillage to prevent material damage. 4.    AUTHORISED USE(S) OF THE META SPC 3 4.1.    Use description Table 4 Use # 1 – Use # 3.1 – Manual or automated dipping, foaming or spraying before milking Product type PT03 – Veterinary hygiene (Disinfectants) Where relevant, an exact description of the authorised use — Target organism(s) (including development stage) Scientific name: Bacteria Common name: Bacteria Development stage: Scientific name: Yeasts Common name: Yeasts Development stage: Field(s) of use Indoor Disinfection of teats of milk producing animals by dipping, foaming or spraying before milking Application method(s) Method: Dipping, foaming, spraying Detailed description: Manual or automated disinfection of teats by dipping, foaming or spraying before milking. Dipping cup, foaming cup, teat sprayer, automated dipping machine, automated foaming machine or automated spraying machine Application rate(s) and frequency Application Rate: A dilution at 10 % (v/v) should be prepared Application rate for the diluted product:- cows and buffaloes (3 to 10 ml: 5 to 8 ml recommended) – sheep (1,5 to 5 ml: 1,5 to 3 ml recommended) – goats (2,5 to 6 ml: 2,5 to 4 ml recommended) Dilution (%): Number and timing of application: Frequency: 2 to 3 times per day Category(ies) of users Professional Pack sizes and packaging material HDPE JERRYCAN 5, 10, 22 L HDPE DRUM 60, 120, 220 L HDPE CONTAINER 1 000  L 4.1.1.    Use-specific instructions for use Prepare a dilution at 10 % (v/v: 10 ml product, add water up to 100 ml) for bactericidal and yeasticidal activity. Fill the dipping/foaming cup/sprayer manually or automatically with the prepared dilution. Eliminate all visible dirt before applying the product. Manual or automatic dipping/foaming/spraying on animal’s teats on the full length of the teat before milking. Let the product act at least one minute. Use the teat cleaning and wiping method systematically before attaching the milking cluster. See also general directions for use of meta SPC 3. 4.1.2.    Use-specific risk mitigation measures For manual spraying applications wear protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information) / protective clothing / eye protection. In case a combination of pre- and post-milking disinfection is necessary, using another biocidal product not containing iodine has to be considered for post-milking disinfection. 4.1.3.    Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use of meta SPC 3 4.1.4.    Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use of meta SPC 3 4.1.5.    Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use of meta SPC 3 4.2.    Use description Table 5 Use # 2 – Use # 3.2 – Manual or automated dipping, foaming or spraying after milking Product type PT03 – Veterinary hygiene (Disinfectants) Where relevant, an exact description of the authorised use — Target organism(s) (including development stage) Scientific name: Bacteria Common name: Bacteria Development stage: Scientific name: Yeasts Common name: Yeasts Development stage: Scientific name: Algae Common name: Algae Development stage: Scientific name: Viruses Common name: Viruses Development stage: Field(s) of use Indoor Disinfection of teats of milk producing animals by dipping, foaming or spraying after milking Application method(s) Method: Dipping, foaming, spraying Detailed description: Manual or automated disinfection of teats by dipping, foaming or spraying after milking. Dipping cup, foaming cup, teat sprayer, automated dipping machine, automated foaming machine or automated spraying machine Application rate(s) and frequency Application Rate: For disinfection of bacteria, yeasts and algae a dilution at 10 % (v/v: 10 ml product, add water up to 100 ml) should be prepared. For disinfection of viruses a dilution at 20 % (v/v: 20 ml product, add water up to 100 ml) should be prepared Application rate for the diluted product:- cows and buffaloes (3 to 10 ml: 5 to 8 ml recommended) – sheep (1,5 to 5 ml: 1,5 to 3 ml recommended) – goats (2,5 to 6 ml: 2,5 to 4 ml recommended) Dilution (%): Number and timing of application: Frequency: 2 to 3 times per day Category(ies) of users Professional Pack sizes and packaging material HDPE JERRYCAN 5, 10, 22 L HDPE DRUM 60, 120, 220 L HDPE CONTAINER 1 000  L 4.2.1.    Use-specific instructions for use Prepare a dilution at 10 % (v/v: 10 ml product, add water up to 100 ml) for bactericidal, yeasticidal and algaecidal activity or 20 % (v/v: 20 ml product, add water up to 100 ml) in case virucidal activity is also needed. Fill the dipping/foaming cup/sprayer manually or automatically with the prepared dilution. Manual or automatic dipping/foaming/spraying on animal’s teats on the full length of the teat after milking. Leave the product until next milking. Keep the cows standing until the product has dried (at least 5 minutes). At the next milking, use the teat cleaning and wiping method systematically before attaching the milking cluster. See also general directions for use of meta SPC 3. 4.2.2.    Use-specific risk mitigation measures For manual spraying applications wear chemical resistant gloves (glove material to be specified by the authorisation holder within the product information) /protective clothing / eye protection. In case a combination of pre- and post-milking disinfection is necessary, using another biocidal product not containing iodine has to be considered for pre-milking disinfection. 4.2.3.    Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use of meta SPC 3 4.2.4.    Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use of meta SPC 3 4.2.5.    Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use of meta SPC 3 5.    GENERAL DIRECTIONS FOR USE  ( 3 ) OF THE META SPC 3 5.1.    Instructions for use See use-specific instructions for each use. Always read the label or leaflet before use and follow all the instructions provided. The product must be brought to a temperature above 20 °C before use. The use of a dosing pump for filling the product into the application equipment is recommended. Fill the dipping/foaming cup/sprayer manually or automatically with the prepared dilution. Where necessary, repeat the application at each milking Clean the application equipment regularly with warm water. 5.2.    Risk mitigation measures See use-specific risk mitigation measures for each use. 5.3.    Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment Take the contaminated clothes and shoes off immediately. Wash them before wearing them again. In case of faintness, get medical advice/attention. Show this safety data sheet to the doctor. FIRST AID INSTRUCTIONS —  In the event of inhalation: Bring to fresh air. —  In the event of contact with the skin: Wash with water. —  In the event of contact with the eyes: Rinse at once with a soft stream of water for at least 15 minutes, eyes wide open. Remove contact lenses if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor/physician. —  In the event of ingestion: Rinse mouth. Do NOT induce vomiting. Get medical advice. Refer to the safety data sheet available for professional user: it contains an emergency phone number. Large spillage: Mark out, dyke up with an inert absorbant and pump in an emergency tank. Keep in suitable, properly labelled and closed containers for disposal. Never return spills in original containers for re-use. 5.4.    Instructions for safe disposal of the product and its packaging At the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant. The paper towels used for removing the product and drying the teats are disposed in the normal and domestic waste. 5.5.    Conditions of storage and shelf-life of the product under normal conditions of storage Shelf life: 2 years in HDPE Do not store at a temperature higher than 30 °C. 6.    OTHER INFORMATION 7.    THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 3 7.1.    Trade name(s), authorisation number and specific composition of each individual product Trade name(s) Teat Guard Concentrate 1:4 Market area: EU   IODO GUARD CONCENTRATE 1:4 Market area: EU Authorisation number EU-0018496-0003 1-3 Common name IUPAC name Function CAS number EC number Content (%) Iodine   Active Substance 7553-56-2 231-442-4 2,5 Alcohols, C12-14, ethoxylated (11 mol EO average molar ratio) Poly(oxy-1,2-ethanediyl), -C12-14-(even numbered)-alkyl--hydroxy Non-active substance 68439-50-9   24,199 META SPC 4 1.    META SPC 4 ADMINISTRATIVE INFORMATION 1.1.    Meta SPC 4 identifier Identifier meta SPC 4: Dipping products reaching virucidal activity – Ready to use 1.2.    Suffix to the authorisation number Number 1-4 1.3.    Product type(s) Product type(s) PT03 – Veterinary hygiene (Disinfectants) 2.    META SPC 4 COMPOSITION 2.1.    Qualitative and quantitative information on the composition of the meta SPC 4 Common name IUPAC name Function CAS number EC number Content (%) Min Max Iodine   Active Substance 7553-56-2 231-442-4 0,5 0,5 Alcohols, C12-14, ethoxylated (11 mol EO average molar ratio) Poly(oxy-1,2-ethanediyl), -C12-14-(even numbered)-alkyl--hydroxy Non-active substance 68439-50-9   4,993 4,993 2.2.    Type(s) of formulation of the meta SPC 4 Formulation(s) AL – Any other liquid 3.    HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 4 Hazard statements Causes serious eye irritation. Harmful to aquatic life with long lasting effects. Precautionary statements Keep out of reach of children. Wash hands thoroughly after handling. Wear protective gloves. Wear protective clothing. Wear eye protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice. Get medical advice. 4.    AUTHORISED USE(S) OF THE META SPC 4 4.1.    Use description Table 6 Use # 1 – Use # 4.1 – Manual or automated dipping after milking Product type PT03 – Veterinary hygiene (Disinfectants) Where relevant, an exact description of the authorised use — Target organism(s) (including development stage) Scientific name: Bacteria Common name: Bacteria Development stage: Scientific name: Yeasts Common name: Yeasts Development stage: Scientific name: Algae Common name: Algae Development stage: Scientific name: Viruses Common name: Viruses Development stage: Field(s) of use Indoor Disinfection of teats of milk producing animals by dipping after milking Application method(s) Method: Dipping Detailed description: Manual or automated disinfection of teats by dipping after milking. Dipping cup or automated dipping machine. Application rate(s) and frequency Application Rate: – cows and buffaloes (3 to 10 ml: 5 ml recommended) – sheep (1,5 to 5 ml: 1,5 ml recommended) – goats (2,5 to 6 ml: 2,5 ml recommended) Dilution (%): Number and timing of application: Frequency: 2 to 3 times per day Category(ies) of users Professional Pack sizes and packaging material HDPE JERRYCAN 5, 10, 22 L HDPE DRUM 60, 120, 220 L HDPE CONTAINER 1 000 L 4.1.1.    Use-specific instructions for use See general directions for use of meta SPC 4 4.1.2.    Use-specific risk mitigation measures See general directions for use of meta SPC 4 4.1.3.    Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use of meta SPC 4 4.1.4.    Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use of meta SPC 4 4.1.5.    Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use of meta SPC 4 5.    GENERAL DIRECTIONS FOR USE  ( 4 ) OF THE META SPC 4 5.1.    Instructions for use Always read the label or leaflet before use and follow all the instructions provided. The product must be brought to a temperature above 20 °C before use. The use of a dosing pump for filling the product into the application equipment is recommended. Fill the dipping cup manually or automatically with the ready to use product. Apply by dipping manually or automatically on animal’s teats on the full length of the teat after milking. —  cows and buffaloes (3 to 10 ml: 5 ml recommended) —  sheep (1,5 to 5 ml: 1,5 ml recommended) —  goats (2,5 to 6 ml: 2,5 ml recommended) Leave the product until next milking. Keep the cows standing until the product has dried (at least 5 minutes). At the next milking, use the teat cleaning and wiping method systematically before attaching the milking cluster. Where necessary, repeat the application after each milking. Clean the application equipment regularly with warm water. 5.2.    Risk mitigation measures Wear eye protection. In case a combination of pre- and post-milking disinfection is necessary, using another biocidal product not containing iodine has to be considered for pre-milking disinfection. 5.3.    Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment Take the contaminated clothes and shoes off immediately. Wash them before wearing them again. FIRST AID INSTRUCTIONS —  In the event of inhalation: Bring to fresh air. —  In the event of contact with the skin: Wash with water. —  In the event of contact with the eyes: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. —  In the event of ingestion: Rinse mouth. Do NOT induce vomiting. Get medical advice. Refer to the safety data sheet available for professional user: it contains an emergency phone number. Large spillage: Mark out, dyke up with an inert absorbant and pump in an emergency tank. Keep in suitable, properly labelled and closed containers for disposal. Never return spills in original containers for re-use. 5.4.    Instructions for safe disposal of the product and its packaging At the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant. The paper towels used for removing the product and drying the teats are disposed in the normal and domestic waste. 5.5.    Conditions of storage and shelf-life of the product under normal conditions of storage Shelf life: 2 years in HDPE Do not store at a temperature higher than 30 °C. 6.    OTHER INFORMATION 7.    THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 4 7.1.    Trade name(s), authorisation number and specific composition of each individual product Trade name(s) Teatsan 5000 Market area: EU   IODO GUARD 5000 Market area: EU Authorisation number EU-0018496-0004 1-4 Common name IUPAC name Function CAS number EC number Content (%) Iodine   Active Substance 7553-56-2 231-442-4 0,5 Alcohols, C12-14, ethoxylated (11 mol EO average molar ratio) Poly(oxy-1,2-ethanediyl), -C12-14-(even numbered)-alkyl--hydroxy Non-active substance 68439-50-9   4,993 META SPC 5 1.    META SPC 5 ADMINISTRATIVE INFORMATION 1.1.    Meta SPC 5 identifier Identifier meta SPC 5: Dipping, foaming, spraying products 5 500 ppm – Ready to use 1.2.    Suffix to the authorisation number Number 1-5 1.3.    Product type(s) Product type(s) PT03 – Veterinary hygiene (Disinfectants) 2.    META SPC 5 COMPOSITION 2.1.    Qualitative and quantitative information on the composition of the meta SPC 5 Common name IUPAC name Function CAS number EC number Content (%) Min Max Iodine   Active Substance 7553-56-2 231-442-4 0,55 0,55 Alcohols, C12-14, ethoxylated (11 mol EO average molar ratio) Poly(oxy-1,2-ethanediyl), -C12-14-(even numbered)-alkyl--hydroxy Non-active substance 68439-50-9   4,69 4,69 2.2.    Type(s) of formulation of the meta SPC 5 Formulation(s) AL – Any other liquid 3.    HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 5 Hazard statements Causes serious eye irritation. Harmful to aquatic life with long lasting effects. Precautionary statements Keep out of reach of children. Wash hands thoroughly after handling. Wear protective gloves. Wear protective clothing. Wear eye protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice. Get medical advice. 4.    AUTHORISED USE(S) OF THE META SPC 5 4.1.    Use description Table 7 Use # 1 – Use # 5.1 – Manual or automated dipping, foaming or spraying before milking Product type PT03 – Veterinary hygiene (Disinfectants) Where relevant, an exact description of the authorised use — Target organism(s) (including development stage) Scientific name: Bacteria Common name: Bacteria Development stage: Scientific name: Yeasts Common name: Yeasts Development stage: Field(s) of use Indoor Disinfection of teats of milk producing animals by dipping, foaming or spraying before milking Application method(s) Method: Dipping, foaming, spraying Detailed description: Manual or automated disinfection of teats by dipping, foaming or spraying before milking Dipping cup, foaming cup, teat sprayer, automated dipping machine, automated foaming machine or automated spraying machine Application rate(s) and frequency Application Rate: – cows and buffaloes (3 to 10 ml: 5 to 8 ml recommended) – sheep (1,5 to 5 ml: 1,5 to 3 ml recommended) – goats (2,5 to 6 ml: 2,5 to 4 ml recommended) Dilution (%): Number and timing of application: Frequency: 2 to 3 times per day Category(ies) of users Professional Pack sizes and packaging material HDPE JERRYCAN 5, 10, 22 L HDPE DRUM 60, 120, 220 L HDPE CONTAINER 1 000 L 4.1.1.    Use-specific instructions for use Fill the dipping/foaming cup/sprayer manually or automatically with the ready to use product. Eliminate all visible dirt before applying the product. Manual or automatic dipping/foaming/spraying on animal’s teats on the full length of the teat before milking. Let the product act at least one minute. Use the teat cleaning and wiping method systematically before attaching the milking cluster. See also general instructions for use of meta SPC5. 4.1.2.    Use-specific risk mitigation measures For manual dipping/foaming application: Wear protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information) / eye protection. For manual spraying applications wear protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information) / protective clothing / eye protection. In case a combination of pre- and post-milking disinfection is necessary, using another biocidal product not containing iodine has to be considered for post-milking disinfection. 4.1.3.    Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use of meta SPC 5 4.1.4.    Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use of meta SPC 5 4.1.5.    Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use of meta SPC 5 4.2.    Use description Table 8 Use # 2 – Use # 5.2 – Manual or automated dipping, foaming or spraying after milking Product type PT03 – Veterinary hygiene (Disinfectants) Where relevant, an exact description of the authorised use — Target organism(s) (including development stage) Scientific name: Bacteria Common name: Bacteria Development stage: Scientific name: Yeasts Common name: Yeasts Development stage: Scientific name: Algae Common name: Algae Development stage: Scientific name: Viruses Common name: Viruses Development stage: Field(s) of use Indoor Disinfection of teats of milk producing animals by dipping, foaming or spraying after milking Application method(s) Method: Dipping, foaming, spraying Detailed description: Manual or automated disinfection of teats by dipping, foaming or spraying after milking. Dipping cup, foaming cup, teat sprayer, automated dipping machine, automated foaming machine or automated spraying machine. Application rate(s) and frequency Application Rate: – cows and buffaloes (3 to 10 ml: 5 to 8 ml recommended) – sheep (1,5 to 5 ml: 1,5 to 3 ml recommended) – goats (2,5 to 6 ml: 2,5 to 4 ml recommended) Dilution (%): Number and timing of application: Frequency: 2 to 3 times per day Category(ies) of users Professional Pack sizes and packaging material HDPE JERRYCAN 5, 10, 22 L HDPE DRUM 60, 120, 220 L HDPE CONTAINER 1 000 L 4.2.1.    Use-specific instructions for use Fill the dipping/foaming cup/sprayer manually or automatically with the ready to use product. Manual or automatic dipping/foaming/spraying on animal’s teats on the full length of the teat after milking. Leave the product until next milking. Keep the cows standing until the product has dried. (at least 5 minutes) At the next milking, use the teat cleaning and wiping method systematically before attaching the milking cluster. See also general instructions for use of meta SPC 5. 4.2.2.    Use-specific risk mitigation measures For manual spraying applications wear protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information) / protective clothing / eye protection. In case a combination of pre- and post-milking disinfection is necessary, using another biocidal product not containing iodine has to be considered for pre-milking disinfection. 4.2.3.    Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use of meta SPC 5 4.2.4.    Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use of meta SPC 5 4.2.5.    Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use of meta SPC 5 5.    GENERAL DIRECTIONS FOR USE  ( 5 ) OF THE META SPC 5 5.1.    Instructions for use See use-specific instructions for each use. Always read the label or leaflet before use and follow all the instructions provided. The product must be brought to a temperature above 20 °C before use. The use of a dosing pump for filling the product into the application equipment is recommended. Where necessary repeat the application at each milking Clean the application equipment regularly with warm water. 5.2.    Risk mitigation measures See use-specific risk mitigation measures for each use. 5.3.    Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment Take the contaminated clothes and shoes off immediately. Wash them before wearing them again. FIRST AID INSTRUCTIONS —  In the event of inhalation: Bring to fresh air. —  In the event of contact with the skin: Wash with water. —  In the event of contact with the eyes: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. —  In the event of ingestion: Rinse mouth. Do NOT induce vomiting. Get medical advice. Refer to the safety data sheet available for professional user: it contains an emergency phone number. Large spillage: Mark out, dyke up with an inert absorbant and pump in an emergency tank. Keep in suitable, properly labelled and closed containers for disposal. Never return spills in original containers for re-use. 5.4.    Instructions for safe disposal of the product and its packaging At the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant. The paper towels used for removing the product and drying the teats are disposed in the normal and domestic waste. 5.5.    Conditions of storage and shelf-life of the product under normal conditions of storage Shelf life: 2 years in HDPE Do not store at a temperature higher than 30 °C. 6.    OTHER INFORMATION 7.    THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 5 7.1.    Trade name(s), authorisation number and specific composition of each individual product Trade name(s) Teat Guard 5500 Market area: EU   IODO SPRAY 5500 Market area: EU Authorisation number EU-0018496-0005 1-5 Common name IUPAC name Function CAS number EC number Content (%) Iodine   Active Substance 7553-56-2 231-442-4 0,55 Alcohols, C12-14, ethoxylated (11 mol EO average molar ratio) Poly(oxy-1,2-ethanediyl), -C12-14-(even numbered)-alkyl--hydroxy Non-active substance 68439-50-9   4,69

Other acts of the same type
Commission Implementing Regulation (EU) 2021/791 of 10 May 2021 approving non-minor amendments to the specification for a name entered in the register of protected designations of origin and protected geographical indications (‘Aischgründer Karpfen’ (PGI))Commission Delegated Regulation (EU) 2021/1204 of 10 May 2021 amending Delegated Regulation (EU) 2019/856 as regards the application and selection procedures under the Innovation FundCommission Implementing Regulation (EU) 2021/758 of 7 May 2021 on the status of certain products as feed additives within the scope of Regulation (EC) No 1831/2003 of the European Parliament and of the Council and on the withdrawal from the market of certain feed additives (Text with EEA relevance)Commission Implementing Regulation (EU) 2021/759 of 7 May 2021 amending Implementing Regulation (EU) 2019/2072 as regards the exceptions from the requirement of a plant passport, the status of Italy, Ireland, Lithuania, Slovenia and Slovakia or certain areas thereof as protected zones, and the reference to a protected zone in PortugalCommission Implementing Regulation (EU) 2021/760 of 7 May 2021 amending Implementing Regulations (EU) 2020/761 and (EU) 2020/1988 as regards the management system of some tariff quotas with licences and repealing Implementing Regulation (EU) 2020/991Commission Implementing Regulation (EU) 2021/761 of 7 May 2021 amending Annexes I to IV to Implementing Regulation (EU) 2017/717 as regards the model forms of zootechnical certificates for breeding animals and their germinal products (Text with EEA relevance)Commission Delegated Regulation (EU) 2021/1189 of 7 May 2021 supplementing Regulation (EU) 2018/848 of the European Parliament and of the Council as regards the production and marketing of plant reproductive material of organic heterogeneous material of particular genera or species (Text with EEA relevance)Council Implementing Regulation (EU) 2021/743 of 6 May 2021 implementing Regulation (EU) No 36/2012 concerning restrictive measures in view of the situation in SyriaCommission Implementing Regulation (EU) 2021/744 of 6 May 2021 laying down technical information for the calculation of technical provisions and basic own funds for reporting with reference dates from 31 March 2021 until 29 June 2021 in accordance with Directive 2009/138/EC of the European Parliament and of the Council on the taking-up and pursuit of the business of Insurance and Reinsurance (Text with EEA relevance)Commission Implementing Regulation (EU) 2021/745 of 6 May 2021 amending Implementing Regulation (EU) No 540/2011 as regards the extension of the approval periods of the active substances aluminium ammonium sulphate, aluminium silicate, beflubutamid, benthiavalicarb, bifenazate, boscalid, calcium carbonate, captan, carbon dioxide, cymoxanil, dimethomorph, ethephon, extract from tea tree, famoxadone, fat distilation residues, fatty acids C7 to C20, flumioxazine, fluoxastrobin, flurochloridone, folpet, formetanate, gibberellic acid, gibberellins, heptamaloxyloglucan, hydrolysed proteins, iron sulphate, metazachlor, metribuzin, milbemectin, Paecilomyces lilacinus strain 251, phenmedipham, phosmet, pirimiphos-methyl, plant oils/rape seed oil, potassium hydrogen carbonate, propamocarb, prothioconazole, quartz sand, fish oil, repellents by smell of animal or plant origin/ sheep fat, S-metolachlor, Straight Chain Lepidopteran Pheromones, tebuconazole and urea (Text with EEA relevance)Commission Delegated Regulation (EU) 2021/962 of 6 May 2021 extending the transitional period referred to in Article 89(1), first subparagraph, of Regulation (EU) No 648/2012 of the European Parliament and of the Council (Text with EEA relevance)Commission Delegated Regulation (EU) 2021/1348 of 6 May 2021 supplementing Regulation (EU) 2016/1011 of the European Parliament and of the Council with regard to regulatory technical standards specifying the criteria under which competent authorities may require changes to the compliance statement of non-significant benchmarks (Text with EEA relevance)

Source: EUR-Lex (Publications Office of the EU), © European Union, reuse permitted under Commission Decision 2011/833/EU.

Contents

What to look at next