Source

Commission Implementing Regulation (EU) 2019/643 of 15 April 2019 concerning the classification of certain goods in the Combined Nomenclature

Implementing Regulation (EU) 2019/643 · Regulation · 4 articles

Data as of 2026-07-04 · Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗

Article 1

Open ↗

The goods described in column (1) of the table set out in the Annex shall be classified within the Combined Nomenclature under the CN code indicated in column (2) of that table.

Binding tariff information which does not conform to this Regulation may continue to be invoked in accordance with Article 34(9) of Regulation (EU) No 952/2013 for a period of three months from the date of entry into force of this Regulation.

Article 3

Open ↗

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union .

Supplementary provisions

ANNEXSupplementary provisions

Open ↗

ANNEX Description of the goods Classification (CN-code) Reasons (1) (2) (3) An article consisting of a rectangular plate made of steel with a length of 48,26 cm (19 inches) and rectangular shaped brackets of plastics. The brackets are attached perpendicularly to the plate, and have an opening in their short sides opposite to the plate. The article has perforations at both ends of the plate to enable it to be fixed by screwing to steel cabinets of a length matching that of the article (19 inch cabinets), which can be used in telecommunication, data processing systems, etc. The article is designed to be used to organise cables in the cabinets. See image ( *1 ) 8302 42 00 Classification is determined by general rules 1, 3(b) and 6 for the interpretation of the Combined Nomenclature, notes 2(c) and 3 to Section XV, note 1(d) to Chapter 94 and by the wording of CN codes 8302 and 8302 42 00 . The steel plate gives the article its essential character because it is the plate which is fixed to the cabinets and supports and holds the brackets in place. Heading 8302 covers general purpose classes of base metal accessory fittings and mountings, such as are used largely on furniture, doors, windows, coachwork etc. even if they are designed for particular uses (see also the Harmonized System Explanatory Notes to heading 8302 , first paragraph). Steel cabinets are classified as furniture within the meaning of note 2 to Chapter 94 (see also the HS classification opinions 940320/3 and 940320/4). The article has the objective characteristics of a fitting of base metal suitable for furniture classified under heading 8302 . In accordance with note 2(c) to Section XV, articles of heading 8302 are parts of general use. Classification as parts of furniture under heading 9403 is therefore excluded by virtue of note 1(d) to Chapter 94. Consequently, the article is to be classified under CN code 8302 42 00 as other base-metal mountings, fittings and similar articles suitable for furniture. ( *1 ) The image is purely for information.

Other acts of the same type

Source: EUR-Lex (Publications Office of the EU), © European Union, reuse permitted under Commission Decision 2011/833/EU.

What to look at next

Browse all EU Legal ActsEvery instrument by type and year, full text free to read section by sectionEuropean Union legislation EU Legal Acts by type and yearGrouped by instrument type and year of enactment, so you can find others of the same kindBrowse by type and year European Union: what this database coversWhich datasets are here, which official source they come from, and how current they areEuropean Union overview

Article 1

Article 2

Article 3

Supplementary provisions

ANNEXSupplementary provisions

What to look at next