Subject matter
Article 1
This Regulation lays down detailed provisions for the use of aerodynamic rear devices mounted on vehicles and vehicle combinations in accordance with Directive 96/53/EC.
Commission Implementing Regulation (EU) 2019/1916 of 15 November 2019 laying down detailed provisions as regards the use of rear aerodynamic devices pursuant to Council Directive 96/53/EC
Data as of 2026-07-04 · Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗
Subject matter
This Regulation lays down detailed provisions for the use of aerodynamic rear devices mounted on vehicles and vehicle combinations in accordance with Directive 96/53/EC.
Definitions
For the purposes of this Regulation, the following definitions apply: (a) ‘devices’ means aerodynamic devices mounted at the rear of vehicles or vehicle combinations; (b) ‘in-use position’ means the position of devices in a deployed aerodynamic drag-reducing position; (c) ‘closed position’ means the position of devices in a folded or retracted position, which is safely secured.
Operational conditions
1. Member States may prohibit the circulation of vehicles or vehicle combinations equipped with devices in the in-use position in urban or interurban areas, where this is required by the competent authorities, taking into account the special characteristics of such areas, in particular where speed limits are 50 km/h or less and where there may be vulnerable road users. 2. The devices shall be in the closed position in situations or areas where special attention or consideration is necessary. This may occur: (a) while manoeuvring, reversing or parking the vehicle; (b) when the vehicle is parked; (c) while loading or unloading goods. 3. The use of devices in intermodal transport operations shall be subject to the following requirements: (a) in preparation of and during intermodal transport the devices shall be in the closed position; (b) the devices shall not protrude more than 25 mm on each side of the vehicle and the total width of the vehicle including the devices shall not exceed 2 600 mm; 4. Defective, unsafe or malfunctioning devices shall be kept in the closed position or, where possible, immediately removed. 5. By way of exception to paragraphs 2 and 3(a), devices are not required to be in the closed position where, in accordance with Part B point 1.3.1.1.3, Part C point 1.3.1.1.3, and Part D point 1.4.1.1.3 of Annex I to Regulation (EU) No 1230/2012, they are not required to be retractable or foldable if the maximum dimensional requirements are complied with under all conditions.
Entry into force
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European .Union This Regulation shall be binding in its entirety and directly applicable in all Member States.Union
Source: EUR-Lex (Publications Office of the EU), © European Union, reuse permitted under Commission Decision 2011/833/EU.