Article 1
The Annex to Regulation (EU) 2021/2278 is amended in accordance with the Annex to this Regulation.
Council Regulation (EU) 2022/1008 of 17 June 2022 amending Regulation (EU) 2021/2278 suspending the Common Customs Tariff duties referred to in Article 56(2), point (c), of Regulation (EU) No 952/2013 on certain agricultural and industrial products
Council Regulation (EU) 2022/1008 of 17 June 2022 amending Regulation (EU) 2021/2278 suspending the Common Customs Tariff duties referred to in Article 56(2), point (c), of Regulation (EU) No 952/2013 on certain agricultural and industrial products
Data as of 2026-07-04 · Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗
Article 2
This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union . It shall apply from 1 July 2022.
Supplementary provisions
ANNEXSupplementary provisions
ANNEX The Annex to Regulation (EU) 2021/2278 is amended as follows: (1) the entries with the following serial numbers are deleted: 0.3965, 0.4050, 0.4890, 0.4934, 0.5487, 0.7369, 0.8088 and 0.8210; (2) the following entries replace those entries that have the same serial numbers: Serial number CN code TARIC Description Rate of autonomous duty Supplementary unit Date envisaged for mandatory review ‘0.7284 ex 2106 90 92 ex 3504 00 90 50 10 Casein protein hydrolysate consisting of: — by weight 20 % or more but not more than 70 % free amino acids, and — peptones of which by weight more than 90 % having a molecular weight of not more than 2 000 Da 0 % - 31.12.2022 0.2542 ex 2903 47 00 20 1,1,1,3,3-Pentafluoropropane (HFC-245fa) (CAS RN 460-73-1) 0 % - 31.12.2023 0.3616 ex 2922 19 00 53 2-(2-Methoxyphenoxy)ethanamine (CAS RN 1836-62-0) with a purity by weight of 98 % or more 0 % - 31.12.2024 0.8137 ex 3208 90 19 ex 3911 90 99 13 63 Mixture, containing by weight: — 20 % or more but not more than 40 % of a copolymer of methyl vinyl ether and monobutyl maleate (CAS RN 25119-68-0), — 7 % or more but not more than 20 % of a copolymer of methyl vinyl ether and monoethyl maleate (CAS RN 25087-06-3), — 40 % or more, but not more than 65 % of ethanol (CAS RN 64-17-5), — 1 % or more but not more than 7 % of butan-1-ol (CAS RN 71-36-3) 0 % - 31.12.2025 0.5560 ex 3904 69 80 85 Copolymer of ethylene and chlorotrifluoroethylene, whether or not modified with hexafluoroisobutylene, whether or not containing fillers 0 % - 31.12.2022 0.2759 ex 3907 30 00 40 Epoxide resin, containing by weight 70 % or more of silicon dioxide, for the encapsulation of goods of headings 8504 , 8533 , 8535 , 8536 , 8541 , 8542 or 8548 ( 1 ) 0 % - 31.12.2023 0.5172 ex 3912 39 85 40 Hypromellose (INN) (CAS RN 9004-65-3) 0 % - 31.12.2022 0.4844 ex 3921 90 55 25 Prepreg sheets or rolls containing polyimide resin 0 % - 31.12.2024 0.8024 ex 5603 14 10 30 Non-wovens, consisting of poly(ethylene terephthalate) spun bonded media: — of weight of 160 g/m 2 or more but not more than 300 g/m 2 , — with a filtration efficiency of class M or better (according to DIN 60335-2-69), — pleatable, with at least one of following treatments: — a coating or covering with polytetrafluoroethylene (PTFE), — a coating with aluminium particles, — a coating of phosphorous based flame retardants, — a nano fiber coating of a polyamide, a polyurethane or a fluorine-containing polymer 0 % m 2 31.12.2023 0.5987 ex 5603 14 90 60 Non-wovens, consisting of poly(ethylene terephthalate) spun bonded media: — of weight of 160 g/m 2 or more but not more than 300 g/m 2 , — with a filtration efficiency of class M or better (according to DIN 60335-2-69), — pleatable, — with or without an expanded polytetrafluoroethylene (ePTFE) membrane 0 % m 2 31.12.2023 0.4476 ex 7019 61 00 ex 7019 61 00 ex 7019 65 00 ex 7019 65 00 ex 7019 65 00 ex 7019 65 00 ex 7019 65 00 ex 7019 65 00 ex 7019 65 00 ex 7019 66 00 ex 7019 66 00 ex 7019 66 00 ex 7019 66 00 ex 7019 66 00 ex 7019 66 00 ex 7019 66 00 ex 7019 90 00 ex 7019 90 00 11 19 11 12 13 14 15 18 19 11 12 13 14 15 18 19 11 19 Woven fabrics of rovings, impregnated with epoxy resin, with a coefficient of thermal expansion between 30°C and 120°C (measured according to IPC-TM-650) of: — 10ppm per°C or more but not more than 12ppm per°C in the length and width, and — 20ppm per°C or more but not more than 30ppm per°C in the thickness, with a glass transition temperature of 152°C or more but not more than 153°C (measured according IPC-TM-650) 0 % - 31.12.2023 0.7996 ex 8418 99 90 20 Aluminium connecting block for connecting to a condenser manifold in welding process: — hardened to T6 or T5 temper, — with a weight of not more than 150 g, — with a length of 20 mm or more but not more than 150 mm, — with a fixing rail in one piece 0 % p/st 31.12.2025 0.8004 ex 8418 99 90 30 Receiver dryer profile for connecting to a condenser manifold in welding process with: — a braze flatness of not more than 0,2 mm, — a weight of 100 g or more but not more than 600 g, — a fixing rail in one piece 0 % p/st 31.12.2025 0.7375 ex 8481 10 19 ex 8481 10 99 30 20 Electromagnetic pressure reducing valve — with a plunger, — with an operating pressure of not more than 325 MPa, — with a plastic connector with 2 silver or tin, or silver-plated, or tin-plated, or silver and tin plated pins 0 % - 31.12.2022 0.7029 ex 8505 11 00 47 Articles in the form of a triangle, square, rectangle, or trapezoid, whether or not arched, with rounded corners or oblique sides, intended to become permanent magnets after magnetisation, containing neodymium, iron and boron, with the following dimensions: — a length of 9 mm or more but not more than 105 mm, — a width of 5 mm or more but not more than 105 mm, and — a height of 2 mm or more but not more than 55 mm 0 % - 31.12.2026 0.5548 ex 8507 60 00 50 Modules for the assembly of batteries of ion lithium electric accumulators with: — a length of 298 mm or more, but not more than 500 mm, — a width of 33,5 mm or more, but not more than 209 mm, — a height of 75 mm or more, but not more than 228 mm, — a weight of 3,6 kg or more, but not more than 17 kg, and — a power of 458 Wh or more, but not more than 2 900 Wh 1,3 % - 31.12.2022 0.7489 ex 8529 90 92 78 OLED modules, consisting of one or more TFT glass or plastic cells, — a diagonal measurement of the screen of 121 cm or more, but not more than 224 cm, — with a thickness of not more than 55mm, — containing organic material, — with control electronic for pixel addressing only, — with V-by-One Interface and with or without a plug for power supply, — with back cover, of a kind used in the manufacture of TV sets and monitors 0 % - 31.12.2023 0.3959 ex 8540 71 00 20 Continuous wave magnetron with: — a fixed frequency of 2 460 MHz, — a packaged magnet, — a probe output, — an output power of 960 or more but not more than 1 500 W 0 % - 31.12.2023 0.6687 ex 8708 95 10 ex 8708 95 99 30 40 Inflatable sewn safety cushion of high strength polyamide fibre: — folded into three-dimensional packing form, fixed by thermal forming, dedicated fixation seams, fabric cover or plastic staples, or — flat safety cushion with or without thermal folding 0 % p/st 31.12.2025 (3) the following entries are inserted according to the numerical order of the CN and TARIC codes in the second and third columns: Serial number CN code TARIC Description Rate of autonomous duty Supplementary unit Date envisaged for mandatory review ‘0.8296 ex 2826 90 80 30 Lithium hexafluorophosphate (CAS RN 21324-40-3) with a purity by weight of 99 % or more 2,7 % - 31.12.2022 0.8237 ex 2845 90 10 10 4-( Tert -Butyl)-2-(2-(methyl-d3)propan-2-yl-1,1,1,3,3,3-d6)phenol (CAS RN 2342594-40-3) with a purity by weight of 98 % or more 0 % - 31.12.2026 0.8282 ex 2903 19 00 20 1,3-Dichloropropane (CAS RN 142-28-9) with a purity by weight of 99 % or more 0 % - 31.12.2026 0.8241 ex 2909 49 80 30 3,4-Dimethoxybenzyl alcohol (CAS RN 93-03-8) with a purity by weight of 98 % or more 0 % - 31.12.2026 0.8288 ex 2914 40 90 10 Benzoin (CAS RN 119-53-9) with a purity by weight of 99 % or more 0 % - 31.12.2026 0.8311 ex 2915 90 70 38 Pelargonic acid (CAS RN 112-05-0) with a purity by weight of 95 % or more 0 % - 31.12.2026 0.8302 ex 2917 19 80 55 Maleic acid (CAS RN 110-16-7) with a purity by weight of 99 % or more 3,2 % - 31.12.2022 0.8255 ex 2917 39 95 45 3-(4-Chlorophenyl)glutaric acid (CAS RN 35271-74-0) with a purity by weight of 98 % or more 0 % - 31.12.2026 0.8256 ex 2918 30 00 55 Methyl 3-oxo-pentanoate (CAS RN 30414-53-0) with a purity by weight of 98 % or more 0 % - 31.12.2026 0.8297 ex 2920 90 10 45 Ethylene carbonate (CAS RN 96-49-1) with a purity by weight of 99 % or more 3,2 % - 31.12.2022 0.8298 ex 2920 90 10 55 Vinylene carbonate (CAS RN 872-36-6) with a purity by weight of 99,9 % or more 3,2 % - 31.12.2022 0.8299 ex 2920 90 10 65 Vinyl ethylene carbonate (CAS RN 4427-96-7) with a purity by weight of 99 % or more 3,2 % - 31.12.2022 0.8234 ex 2922 49 85 33 4-Amino-2-chlorobenzoic acid (CAS RN 2457-76-3) with a purity by weight of 98 % or more 0 % - 31.12.2026 0.8236 ex 2922 49 85 43 (E)-Ethyl 4-(dimethylamino)but-2-enoate maleate (CAS RN 1690340-79-4) with a purity by weight of 98 % or more 0 % - 31.12.2026 0.8283 ex 2924 19 00 48 N,N-Dimethylcarbamoyl chloride (CAS RN 79-44-7) with a purity by weight of 99 % or more 0 % - 31.12.2026 0.8235 ex 2924 29 70 32 N-(4-Amino-2-ethoxyphenyl)acetamide (CAS RN 848655-78-7) with a purity by weight of 98 % or more 0 % - 31.12.2026 0.8258 ex 2924 29 70 36 N,N'-(2-Chloro-5-methyl-1,4-phenylene)bis[3-oxobutyramide] (CAS RN 41131-65-1) with a purity by weight of 97 % or more 0 % - 31.12.2026 0.8272 ex 2931 90 00 30 Tert -Butylchlorodimethylsilane (CAS RN 18162-48-6) with a purity by weight of 99 % or more 0 % - 31.12.2026 0.8252 ex 2932 19 00 55 (3S)-3-[4-[(5-Bromo-2-chlorophenyl)methyl]phenoxy]tetrahydro-furan (CAS RN 915095-89-5) with a purity by weight of 97 % or more 0 % - 31.12.2026 0.8257 ex 2932 99 00 28 1,4,7,10,13-Pentaoxacyclopentadecane (CAS RN 33100-27-5) with a purity by weight of 90 % or more, the remainder mainly consisting of lineair precursors 0 % - 31.12.2026 0.8240 ex 2933 19 90 53 3-[2-(Dispiro[2.0.2 4 .1 3 ]heptan-7-yl)ethoxy]-1H-pyrazole-4-carboxylic acid (CAS RN 2608048-67-3) with a purity by weight of 98 % or more 0 % - 31.12.2026 0.8312 ex 2933 21 00 45 Sodium (5S,8S)-8-methoxy-2,4-dioxo-1,3-diazaspiro[4.5]decan-3-ide (CAS RN 1400584-86-2) with a purity by weight of 90 % or more 0 % - 31.12.2026 0.8238 ex 2933 39 99 15 (S)-6-Bromo-2-(4-(3-(1,3-dioxoisoindolin-2-yl)propyl)-2,2-dimethylpyrrolidin-1-yl)nicotinamide (CAS RN 2606972-45-4) with a purity by weight of 98 % or more 0 % - 31.12.2026 0.8239 ex 2933 39 99 18 Perfluorophenyl 6-fluoropyridine-2-sulfonate (CAS RN 2608048-81-1) with a purity by weight of 98 % or more 0 % - 31.12.2026 0.8266 ex 2933 39 99 42 Glasdegib maleate (INN) (CAS RN 2030410-25-2) with a purity by weight of 98 % or more 0 % - 31.12.2026 0.8248 ex 2933 59 95 38 5-(5-Chlorosulfonyl-2-ethoxyphenyl)-1-methyl-3-propyl-1,6-dihydro-7H-pyrazolo[4,3-d]pyrimidin-7-one (CAS No 139756-22-2) with a purity by weight of 98 % or more 0 % - 31.12.2026 0.8243 ex 2933 59 95 41 2-(4-Phenoxyphenyl)-7-(piperidin-4-yl)-4,5,6,7-tetrahydropyrazolo[1,5-a]pyrimidine-3-carbonitrile (CAS RN 2190506-57-9) with a purity by weight of 98 % or more 0 % - 31.12.2026 0.8290 ex 2933 99 80 18 2-(2-Ethoxyphenyl)-5-methyl-7-propylimidazolo[5,1-f][1,2,4]-triazin-4(3H)-one (CAS RN 224789-21-3) with a purity by weight of 95 % or more 0 % - 31.12.2026 0.8249 ex 2933 99 80 22 Dibenz[b,f]azepine-5-carbonyl chloride (CAS RN 33948-22-0) with a purity by weight of 98 % or more 0 % - 31.12.2026 0.8284 ex 2933 99 80 32 1H-1,2,3-Triazole (CAS RN 288-36-8) or 2H-1,2,3-triazole (CAS RN 288-35-7) with a purity by weight of 99 % or more 0 % - 31.12.2026 0.8250 ex 2934 99 90 18 Methyl (1R,3R)-1-(1,3-benzodioxol-5-yl)-2-(2-chloroacetyl)-1,3,4,9-tetrahydropyrido[5,4-b]indole-3-carboxylate (CAS RN 171489-59-1) with a purity by weight of 99 % or more 0 % - 31.12.2026 0.8253 ex 2934 99 90 22 4-(Oxiran-2-ylmethoxy)-9H-carbazole (CAS RN 51997-51-4) with a purity by weight of 97 % or more 0 % - 31.12.2026 0.8267 ex 2934 99 90 35 Nusinersen sodium (INNM) (CAS RN 1258984-36-9) with a purity by weight of 95 % or more 0 % - 31.12.2026 0.8289 ex 2934 99 90 71 3,4-Dichloro-1,2,5-thiadiazole (CAS RN 5728-20-1) with a purity by weight of 99 % or more 0 % - 31.12.2026 0.8276 ex 2935 90 90 22 Methyl 2-(chlorosulfonyl)-4-(methylsulfonamidomethyl)benzoate (CAS RN 393509-79-0) with a purity by weight of 90 % or more 0 % - 31.12.2026 0.8277 ex 2935 90 90 24 3-({[(4-methylphenyl)sulfonyl]carbamoyl}amino)phenyl 4-methylbenzenesulfonate (CAS RN 232938-43-1) with a purity by weight of 99 % or more 0 % - 31.12.2026 0.8273 ex 3812 39 90 45 2-Aminoethanol reaction products with cyclohexane and peroxidized N-butyl-2,2,6,6-tetramethyl-4-piperidinamine-2,4,6-trichloro-1,3,5-triazine reaction products (CAS RN 191743-75-6) with a purity by weight of 99 % or more 0 % - 31.12.2026 0.8278 ex 3824 99 92 94 ({[2-(trifluoromethyl)phenyl]carbonyl}amino)methyl acetate (CAS RN 895525-72-1) with a content of at least 45 % by weight dissolved in N,N-dimethylacetamide (CAS RN 127-19-5) 0 % - 31.12.2026 0.8287 ex 3824 99 92 95 Solution of methyl cis-1-{[(2,5-dimethylphenyl)acetyl]amino}-4-methoxycyclohexanecarboxylate (CAS RN 203313-47-7) in N,N-dimethylacetamide (CAS RN 127-19-5), containing by weight 25 % or more but not more than 45 % of the carboxylate 0 % - 31.12.2026 0.8268 ex 3917 32 00 30 Heat shrinkable tube: — containing by weight 80 % or more polymer, — with an insulation resistance of 90 MW or more, — with a dielectric strength of 35 kV / mm or more, — with a wall thickness of 0,04 mm or more, but not more than 0,9 mm, — with a lay-flat width of 18 mm or more, but not more than 156 mm, for use in the manufacture of aluminium electrolytic capacitors ( 2 ) 0 % - 31.12.2022 0.8274 ex 3920 61 00 50 Coextruded film of polycarbonate main layer and polymethyl methacrylate top layer with a: — total thickness of more than 230 μm but not more than 270 μm, — top layer thickness of more than 40 μm but not more than 55 μm, — defined surface roughness of the top layer of 0,5 μm or less (according to ISO 4287), — UV-stabilized top layer 0 % - 31.12.2026 0.8291 ex 3921 90 55 60 Membrane composed of a polyamide layer and a polysulfone layer on a cellulose support layer with: — a total thickness of 0,25 mm or more but not more than 0,40 mm, — a total weight of 109 g/m 2 or more but not more than 114 g/m 2 0 % - 31.12.2026 0.8265 ex 7007 11 10 10 Specifically shaped and toughened safety glass: — with a width of 200 mm or more but not more than 600 mm, — with a height of 150 mm or more but not more than 500 mm, for use in the manufacture of motor vehicle window assemblies ( 2 ) 0 % - 31.12.2026 0.8247 ex 8302 10 00 20 Armrest hinge made of magnesium with: — a length of 255 mm or more but not more than 265 mm, — a width of 155 mm or more but not more than 165 mm, — a height of 115 mm or more but not more than 125 mm, — mounting holes for a lock mechanism 0 % - 31.12.2026 0.8304 ex 8302 30 00 20 Two cold-formed steel supports: — with a length of 160 mm or more but not more than 180 mm, — with a width of 60 mm or more but not more than 80 mm, — with a height of 60 mm or more but not more than 80 mm, — with a movable riveted connection, — with or without elastomeric bumper, — forming a mechanism for indirect movement of the mechanism of the longitudinal positioner of car seats, interacting with the safety latch, — attached to the mechanism of the longitudinal positioner by means of a detachable screw connection, riveting, welding or spot welding 0 % - 31.12.2026 0.8260 ex 8407 34 10 10 Spark-ignition reciprocating or rotary internal combustion piston engines, with: — a cylinder capacity of 1 200 cm 3 or more but not more than 2 000 cm 3 — a power of 95 kW but not more than 135 kW, — a weight of not more than 120 kg, for use in the manufacture of motor vehicles of 8703 ( 2 ) 0 % - 31.12.2026 0.8300 ex 8408 90 65 ex 8408 90 67 ex 8408 90 81 20 20 20 Compression-ignition internal combustion piston engines: — of the inline type, — with a cylinder capacity of 7 100 cm 3 or more but not more than 18 000 cm 3 , — with a power of 205 kW or more but not more than 597 kW, — with an exhaust after-treatment module, — with external width/height/depth dimensions of not more than 1 310 /1 300 /1 040 mm or 2 005 /1 505 /1 300 mm or 2 005 /1 505 /1 800 mm, for use in the manufacture of crushing, screening or separation machines ( 2 ) 0 % - 31.12.2026 0.8244 ex 8409 91 00 85 Cylinder head blank for a four cylinder engine with 10 cores, made of aluminium alloy EN AC-45500, with: — no other components, — a hardness of 52 HRB or more, — casting defects size of not more than 0,4 mm and not more than 10 defects per cm 2 , — a dendrite arm space in combustion chamber of not more than 25 μm, — a double deck water jacket design and — a weight of 18 kg or more but not more than 19 kg, — a length of 506 mm or more but not more than 510 mm, — a height of 282 mm or more but not more than 286 mm, — a width of 143,7 mm or more but not more than 144,3 mm, in one single consignment of 1 000 pieces or more 0 % - 31.12.2026 0.8303 ex 8483 40 25 20 Worm gearbox — in an aluminium alloy housing, — with a plastic or steel worm, — with mounting holes, — with a 90 degree reversible drive direction, — with a 4:19 transmission ratio, — equipped with a lead screw with a length of 333 mm and a guide nut incorporated into the assembly bracket, with or without a lead screw support, for indirect connection to the drive motor of a car seat guide system ( 2 ) 0 % - 31.12.2026 0.8285 ex 8501 53 50 40 Permanent magnet traction AC motor, with: — a continuous power of 110 kW or more but not more than 150 kW, — a liquid cooled system, — a total length of 460 mm or more but not more than 590 mm, — a total width of 450 mm or more but not more than 580 mm, — a total height of 490 mm or more but not more than 590 mm, — a weight of not more than 310 kg, — 4 mounting points 0 % - 31.12.2026 0.8259 ex 8507 60 00 73 Lithium-ion Electric accumulators consisting of 3 modules containing 102 cells in total, with: — a nominal capacity of 51 Ah per cell, — a nominal voltage of 285 V or more but not more than 426V, — a weight of 33 kg or more but not more than 36 kg per module, — a length of 1 400 mm or more but not more than 1 600 mm, — a height of 340 mm or more but not more than 395 mm, — a width of 220 mm or more but not more than 420 mm, for use in the manufacture of vehicles of subheadings 8703 60 and 8703 80 ( 2 ) 1,3 % - 31.12.2022 0.8275 ex 8507 60 00 83 Modules for the assembly of ion lithium electric accumulators with: — a length of 570 mm or more, but not more than 610 mm, — a width of 210 mm or more, but not more than 240 mm, — a height of 100 mm or more, but not more than 120 mm, — a weight of 28 kg or more, but not more than 35 kg, and — a capacity of not more than 2 500 Ah and a nominal energy of less than 7,5 kW, for use in the manufacture of vehicles of subheadings 8703 60 , 8703 70 , 8703 80 and 8704 60 ( 2 ) 1,3 % - 31.12.2022 0.8286 ex 8507 60 00 88 A rechargeable lithium-ion battery, with: — a fuse, — a cell-to-pack design, — a length of 1 050 mm or more but not more than 1 070 mm, — a width of 624 mm or more but not more than 636 mm, — a height of 235 mm or more but not more than 245 mm, — a mass of 214,4 kg or more but not more than 227,6 kg, — a capacity of 228 Ah, — an upper outer casing of a composite material, — an IP68 protection rating, — an energy density of 220Wh/l or more, — a specific energy of 159 Wh/kg or more, — without contactors, for the manufacture of batteries for electric buses ( 2 ) 1,3 % - 31.12.2022 0.8279 ex 8708 40 20 80 Transmission gearbox without torque converter, with: — dual clutch, — 7 or more forward gears, — 1 reverse gear, — a maximum torque of 390 Nm, — whether or not with electric motor integrated, — a height of 480 mm or more but not more than 600 mm, — a width of 350 mm or more but not more than 450 mm, and — a weight of 80kg or more but not more than 110 kg, for use in the manufacture of motor vehicles of Heading 8703 ( 2 ) 0 % - 31.12.2026 0.8292 ex 8708 95 99 50 Airbag inflator containing both pyrotechnics and cold gas as propellant for safety airbags of vehicles, in each individual consignment of 1 000 pieces or more 0 % - 31.12.2026 ( 1 ) Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013.’; ( 2 ) Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013.’.
Other acts of the same type
Commission Implementing Regulation (EU) 2026/1305 of 11 June 2026 amending Implementing Regulation (EU) 2020/1641 regarding imports of live, chilled, frozen or processed bivalve molluscs, echinoderms, tunicates and marine gastropods for human consumption from the United States of AmericaCommission Implementing Regulation (EU) 2026/1306 of 11 June 2026 authorising the placing on the market of rhamnogalacturonan-I enriched carrot extract (cRG-I) as a novel food and amending Implementing Regulation (EU) 2017/2470Commission Implementing Regulation (EU) 2026/1344 of 11 June 2026 amending Annexes V and XIV to Implementing Regulation (EU) 2021/404 as regards the entries for Canada, Chile and the United States in the lists of third countries, territories, or zones thereof authorised for the entry into the Union of consignments of poultry and germinal products of poultry, and of fresh meat of poultry and game birdsCommission Implementing Regulation (EU) 2026/1206 of 9 June 2026 amending Implementing Regulation (EU) 2019/1793 as regards the temporary increase of official controls and emergency measures governing the entry into the Union of certain goods from certain third countriesCommission Implementing Regulation (EU) 2026/1209 of 9 June 2026 concerning the non-approval of Capsicum oleoresin as a basic substance in accordance with Regulation (EC) No 1107/2009 of the European Parliament and of the Council concerning the placing of plant protection products on the marketCommission Implementing Regulation (EU) 2026/1219 of 9 June 2026 authorising the placing on the market of inulin-propionate ester as a novel food and amending Implementing Regulation (EU) 2017/2470Commission Implementing Regulation (EU) 2026/1220 of 9 June 2026 amending Annexes XIV and XV to Implementing Regulation (EU) 2021/404 as regards the entries for Bosnia and Herzegovina in the lists of third countries, territories, or zones thereof authorised for the entry into the Union of consignments of fresh meat of poultry and meat products from poultryCommission Implementing Regulation (EU) 2026/1203 of 8 June 2026 imposing a definitive anti-dumping duty on imports of certain woven and/or stitched glass fibre fabrics originating in the People’s Republic of China and the Arab Republic of Egypt as extended to imports brought to offshore installations, to imports consigned from the Kingdom of Morocco whether declared as originating in the Kingdom of Morocco or not, and to imports consigned from Türkiye whether declared as originating in Türkiye or not, following an expiry review pursuant to Article 11(2) of Regulation (EU) 2016/1036 of the European Parliament and of the CouncilCouncil Implementing Regulation (EU) 2026/1225 of 8 June 2026 implementing Regulation (EU) 2023/1529 concerning restrictive measures in view of Iran’s military support to Russia’s war of aggression against Ukraine and to armed groups and entities in the Middle East and the Red Sea region as well as Iran’s actions undermining freedom of navigation in the Middle EastCommission Implementing Regulation (EU) 2026/1317 of 8 June 2026 amending Regulation (EC) No 474/2006 as regards the list of air carriers banned from operating or subject to operational restrictions within the UnionCommission Implementing Regulation (EU) 2026/1196 of 5 June 2026 establishing a list of common indicators on the functioning of the equality bodies designated under Council Directive (EU) 2024/1499Commission Implementing Regulation (EU) 2026/1200 of 5 June 2026 amending Implementing Regulation (EU) 2015/2447 as regards the rules on the implementation of the temporary EUR 3 customs duty on distance sales of imported goods in a consignment with an intrinsic value not exceeding EUR 150
Source: EUR-Lex (Publications Office of the EU), © European Union, reuse permitted under Commission Decision 2011/833/EU.
What to look at next
Browse all EU Legal ActsEvery instrument by type and year, full text free to read section by sectionEuropean Union legislationEU Legal Acts by type and yearGrouped by instrument type and year of enactment, so you can find others of the same kindBrowse by type and yearEuropean Union: what this database coversWhich datasets are here, which official source they come from, and how current they areEuropean Union overview