My bookmarksSign up free

Commission Implementing Decision (EU) 2023/910 of 3 May 2023 amending Implementing Decision (EU) 2019/450 as regards the publication of references of European Assessment Documents for corrugated bitumen tiles or sheets and other construction products (Text with EEA relevance)

Commission Implementing Decision (EU) 2023/910 of 3 May 2023 amending Implementing Decision (EU) 2019/450 as regards the publication of references of European Assessment Documents for corrugated bitumen tiles or sheets and other construction products (Text with EEA relevance)

Implementing Decision (EU) 2023/910 · Decision · 3 articles

Data as of 2026-07-04 · Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗

Article 1

The Annex to Implementing Decision (EU) 2019/450 is amended in accordance with the Annex to this Decision.

Article 2

This Decision shall enter into force on the day of its publication in the Official Journal of the European Union .

Supplementary provisions

ANNEXSupplementary provisions

ANNEX In the Annex, the following rows are inserted in sequential order following the order of the reference numbers: ‘030016-00-0402 Corrugated bitumen tiles and sheets’ ‘030675-00-0107 Liquid applied bridge deck waterproofing kits’ ‘040708-00-0402 Impact sound insulation mat with additional function of rainwater drainage and protection of external waterproofing layers’ ‘050003-00-0301 Pot bearings with special internal sealing for increased action effects’ ‘060009-00-0802 Kit for system stove - chimney consisting of chimney kit with clay/ceramic flue liner and integrated stove unit’ ‘060012-01-0802 Kits consisting of chimney flue liner, made of glass fibres, mineral and organic substances, additional components and ancillaries (superseding technical specification ‘EAD 060012-00-0802’)’ ‘060014-00-0802 Construction product for penetration of walls and floors by components for conveying products of combustion’ ‘090010-00-0404 Bonded glazing kits and bonding sealants’ ‘150036-00-0301 Fluoraluminate rapid setting cement’ ‘160011-00-0301 Kit for reinforced concrete members with high strength reinforcing steel but limited tensile utilisation’ ‘170006-00-0305 Aggregate concrete masonry units with specific moisture conversion factor Fm’ ‘170012-00-0404 Building blocks made from bricks and cellular glass core’ ‘170018-00-0305 Thermally-insulating and loadbearing units made of cellular glass’ ‘180020-00-0704 Waterless odour trap for floor drains’ ‘220020-00-0402 Low bitumen mass shingles, laminated or not, with mineral or synthetic reinforcement’ ‘260024-00-0301 Polymer macro fibres reinforced with alkali resistant glass fibre for the use in concrete’ ‘260048-00-0301 Calcium carbonate filler aggregate with additional characteristics’ ‘300007-00-0404 Special mirrors’ ‘320014-00-0605 Joint sealing profile made of ethylene propylene diene monomer for the sealing of joints in tubbing constructions’ ‘330076-01-0604 Metal injection anchors for use in masonry (superseding technical specification ‘EAD 330076-00-0604’)’ ‘330924-01-0601 Cast-in anchor bolts (superseding technical specification ‘EAD 330924-00-0601’)’ ‘331565-00-0602 Wedge lock washers for structural bolting assemblies’ ‘332347-00-0601 Connector for strengthening of existing concrete structures by concrete overlay’ ‘340225-00-1109 Plastic chamber systems for underground network access applications installed below manhole tops’ ‘350003-01-1109 Kit for fire resistant service ducts consisting of pre-fabricated connection pieces (made of steel sheet with an intumescent coating or lining) and accessories (superseding technical specification ‘EAD 350003-00-1109’)’

Source: EUR-Lex (Publications Office of the EU), © European Union, reuse permitted under Commission Decision 2011/833/EU.

Contents

What to look at next