資料由法律人 LawPlayer整理提供·EU law / curated by LawPlayer from EUR-Lex
The references of harmonised standards for the interoperability of the rail systems and drafted in support of Directive (EU) 2016/797,listed in Annex I to this Decision, are hereby published in the Official Journal of the European Union. The reference listed in row 114 of that Annex is published with restrictions.
Communication 2018/C 282/03 shall cease to apply.
The references of harmonised standards published in that Communication, listed in Annex II to this Decision, are hereby withdrawn from the Official Journal of the European Union .
Implementing Decision (EU) 2020/453 is repealed.
The references of harmonised standards published in that Decision, and listed in Annex III to this Decision, are hereby withdrawn from the Official Journal of the European Union .
This Decision shall enter into force on the day of its publication in the Official Journal of the European Union .
ANNEX I
No
Reference of the standard
1.
EN 12081:2017
Railway applications – Axleboxes – Lubricating greases
2.
EN 12663-1:2010+A1:2014
Railway applications – Structural requirements of railway vehicle bodies – Part 1: Locomotives and passenger rolling stock (and alternative method for freight wagons)
3.
EN 12663-2:2010
Railway applications – Structural requirements of railway vehicle bodies – Part 2: Freight wag
4.
EN 13129:2016
Railway applications – Air conditioning for main line rolling stock – Comfort parameters and type tests
5.
EN 13145:2001+A1:2011
Railway applications – Track – Wood sleepers and bearers
6.
EN 13230-1:2016
Railway applications – Track – Concrete sleepers and bearers – Part 1: General requirements
7.
EN 13230-2:2016
Railway applications – Track – Concrete sleepers and bearers – Part 2: Prestressed monoblock sleepers
8.
EN 13230-3:2016
Railway applications – Track – Concrete sleepers and bearers – Part 3: Twin-block reinforced sleepers
9.
EN 13231-5:2018
Railway applications – Track – Acceptance of works – Part 5: Procedures for rail reprofiling in plain line, switches, crossings and expansion devices
10.
EN 13232-2:2003+A1:2011
Railway applications – Track – Switches and crossings – Part 2: Requirements for geometric design
11.
EN 13232-3:2003+A1:2011
Railway applications – Track – Switches and crossings – Part 3: Requirements for wheel/rail interaction
12.
EN 13232-4:2005+A1:2011
Railway applications – Track – Switches and crossings – Part 4: Actuation, locking and detection
13.
EN 13232-5:2005+A1:2011
Railway applications – Track – Switches and crossings – Part 5: Switches
14.
EN 13232-6:2005+A1:2011
Railway applications – Track – Switches and crossings – Part 6: Fixed common and obtuse crossings
15.
EN 13232-7:2006+A1:2011
Railway applications – Track – Switches and crossings – Part 7: Crossings with moveable parts
16.
EN 13232-8:2007+A1:2011
Railway applications – Track – Switches and crossings – Part 8: Expansion devices
17.
EN 13232-9:2006+A1:2011
Railway applications – Track – Switches and crossings – Part 9: Layouts
18.
EN 13481-2:2022
Railway applications – Track – Performance requirements for fastening systems – Part 2: Fastening systems for concrete sleepers in ballast
19.
EN 13481-3:2022
Railway applications – Track – Performance requirements for fastening systems – Part 3: Fastening systems for wood and polymeric composite sleepers
20.
EN 13674-1:2011+A1:2017
Railway applications – Track – Rail – Part 1: Vignole railway rails 46 kg/m and above
21.
EN 13674-3:2006+A1:2010
Railway applications – Track – Rail – Part 3: Check rails
22.
EN 13803-1:2010
Railway applications – Track – Track alignment design parameters – Track gauges 1 435 mm and wider – Part 1: Plain line
23.
EN 13803-2:2006+A1:2009
Railway applications – Track – Track alignment design parameters – Track gauges 1 435 mm and wider – Part 2: Switches and crossings and comparable alignment design situations with abrupt changes of curvature
24.
EN 13848-5:2017
Railway applications – Track – Track geometry quality – Part 5: Geometric quality levels – Plain line, switches and crossings
25.
EN 14067-4:2013+A1:2018
Railway applications – Aerodynamics – Part 4: Requirements and test procedures for aerodynamics on open track
26.
EN 14198:2016+A2:2021
Railway applications – Braking – Requirements for the brake system of trains hauled by locomotives
27.
EN 14363:2016+A2:2022
Railway applications – Testing and Simulation for the acceptance of running characteristics of railway vehicles – Running Behaviour and stationary tests
28.
EN 14531-2:2015
Railway applications – Methods for calculation of stopping and slowing distances and immobilization braking – Part 2: Step by step calculations for train sets or single vehicles
29.
EN 14587-2:2009
Railway applications – Track – Flash butt welding of rails – Part 2: New R220, R260, R260Mn and R350HT grade rails by mobile welding machines at sites other than a fixed plant
30.
EN 14813-1:2006+A1:2010
Railway applications – Air conditioning for driving cabs – Part 1: Comfort parameters
31.
EN 14813-2:2006+A1:2010
Railway applications – Air conditioning for driving cabs – Part 2: Type tests
32.
EN 14865-1:2009+A1:2010
Railway applications – Axlebox lubricating greases – Part 1: Method to test the ability to lubricate
33.
EN 14865-2:2006+A2:2010
Railway applications – Axlebox lubricating greases – Part 2: Method to test the mechanical stability to cover vehicle speeds up to 200 km/h
34.
EN 15085-3:2022+A1:2023
Railway applications – Welding of railway vehicles and components – Part 3: Design requirements
35.
EN 15085-6:2022
Railway applications – Welding of railway vehicles and components – Part 6: Maintenance welding requirements
36.
EN 15220:2016
Railway applications – Brake indicators
37.
EN 15273-2:2013+A1:2016
Railway applications – Gauges – Part 2: Rolling stock gauge
38.
EN 15273-3:2013+A1:2016
Railway applications – Gauges – Part 3: Structure gauges
39.
EN 15313:2016
Railway applications – In-service wheelset operation requirements – In-service and off-vehicle wheelset maintenance
40.
EN 15355:2019
Railway applications – Braking – Distributor valves and distributor-isolating devices
41.
EN 15437-2:2012+A1:2022
Railway applications – Axlebox condition monitoring – Interface and design requirements – Part 2: Performance and design requirements of on-board systems for temperature monitoring
42.
EN 15461:2008+A1:2010
Railway applications – Noise emission – Characterisation of the dynamic properties of track sections for pass by noise measurements
43.
EN 15551:2022
Railway applications – Railway rolling stock – Buffers
44.
EN 15566:2022
Railway applications – Railway Rolling stock – Draw gear and screw coupling
45.
EN 15594:2009
Railway applications – Track – Restoration of rails by electric arc welding
46.
EN 15610:2019
Railway applications – Acoustics – Rail and wheel roughness measurement related to noise generation
47.
EN 15611:2020+A1:2022
Railway applications – Braking – Relay valves
48.
EN 15624:2021
Railway applications – Braking – Empty-loaded changeover devices
49.
EN 15625:2021
Railway applications – Braking – Automatic variable load sensing devices
50.
EN 15723:2010
Railway applications – Closing and locking devices for payload protecting devices against environmental influences – Requirements for durability, operation, indication, maintenance, recycling
51.
EN 15734-1:2010+A1:2021
Railway applications – Braking systems of high speed trains – Part 1: Requirements and definitions
52.
EN 15807:2021
Railway applications – Pneumatic half couplings
53.
EN 15827:2011
Railway applications – Requirements for bogies and running gears
54.
EN 15877-1:2012+A1:2018
Railway applications – Marking on railway vehicles – Part 1: Freight wagons
55.
EN 15877-2:2013
Railway applications – Markings of railway vehicles – Part 2: External markings on coaches, motive power units, locomotives and on track machines
56.
EN 16019:2014
Railway applications – Automatic coupler – Performance requirements, specific interface geometry and test method
57.
EN 16116-1:2022
Railway applications – Design requirements for steps, handrails and associated access for staff – Part 1: Passenger vehicles, vans and locomotives
58.
EN 16116-2:2021
Railway applications – Design requirements for steps, handrails and associated access for staff – Part 2: Freight wagons
59.
EN 16186-1:2014+A1:2018
Railway applications – Driver’s cab – Part 1: Anthropometric data and visibility
60.
EN 16186-2:2017
Railway applications – Driver’s cab – Part 2: Integration of displays, controls and indicators
61.
EN 16186-3:2022
Railway applications – Driver’s cab – Part 3: Design of displays for heavy rail vehicles
62.
EN 16235:2013
Railway application – Testing for the acceptance of running characteristics of railway vehicles – Freight wagons – Conditions for dispensation of freight wagons with defined characteristics from on-track tests according to EN 14363
63.
EN 16241:2014+A1:2016
Railway applications – Slack adjuster
64.
EN 16286-1:2013
Railway applications – Gangway systems between vehicles – Part 1: Main applications
65.
EN 16334-1:2014+A1:2022
Railway applications – Passenger Alarm System – Part 1: System requirements for mainline rail
66.
EN 16404:2016
Railway applications – Re-railing and recovery requirements for railway vehicles
67.
EN 16452:2015+A1:2019
Railway applications – Braking – Brake blocks
68.
EN 16494:2015
Railway applications – Requirements for ERTMS Trackside Boards
69.
EN 16584-1:2017
Railway applications – Design for PRM use – General requirements – Part 1: Contrast
70.
EN 16584-2:2017
Railway applications – Design for PRM use – General requirements – Part 2: Information
71.
EN 16584-3:2017
Railway applications – Design for PRM use – General requirements – Part 3: Optical and friction characteristics
72.
EN 16585-1:2017
Railway applications – Design for PRM use – Equipment and components onboard rolling stock – Part 1: Toilets
73.
EN 16585-2:2017
Railway applications – Design for PRM use – Equipment and components on board rolling stock – Part 2: Elements for sitting, standing and moving
74.
EN 16585-3:2017
Railway applications – Design for PRM use – Equipment and components on board rolling stock – Part 3: Clearways and internal doors
75.
EN 16586-1:2017
Railway applications – Design for PRM use – Accessibility of persons with reduced mobility to rolling stock – Part 1: Steps for access and egress
76.
EN 16586-2:2017
Railway applications – Design for PRM use – Accessibility of persons with reduced mobility to rolling stock – Part 2: Boarding aids
77.
EN 16587:2017
Railway applications – Design for PRM Use – Requirements on obstacle free routes for infrastructure
78.
EN 16683:2015
Railway applications – Call for aid and communication device – Requirements
79.
EN 16704-1:2016+A1:2021
Railway applications – Track – Safety protection on the track during work – Part 1: Railway risks and common principles for protection of fixed and mobile work sites
80.
EN 16704-3:2016+A1:2021
Railway applications – Track – Safety protection on the track during work – Part 3: Competences for personnel related to work on or near tracks
81.
EN 16729-1:2016
Railway applications – Infrastructure – Non-destructive testing on rails in track – Part 1: Requirements for ultrasonic inspection and evaluation principles
82.
EN 16729-3:2018
Railway applications – Infrastructure – Non-destructive testing on rails in track – Part 3: Requirements for identifying internal and surface rail defects
83.
EN 16729-4:2018
Railway applications – Infrastructure – Non-destructive testing on rails in track – Part 4: Qualification of personnel for non-destructive testing on rails
84.
EN 16839:2022
Railway applications – Rolling stock – Head stock layout
85.
EN 16922:2017+A1:2019
Railway applications – Ground based services – Vehicle waste water discharge equipment
86.
EN 17023:2018
Railway applications – Railway vehicle maintenance – Creation and modification of maintenance plan
87.
EN 17069-1:2019
Railway applications – Systems and procedures for change of track gauge – Part 1: Automatic Variable Gauge Systems
88.
EN 45545-1:2013
Railway applications – Fire protection on railway vehicles – Part 1: General
89.
EN 45545-3:2013
Railway applications – Fire protection on railway vehicles – Part 3: Fire resistance requirements for fire barriers
90.
EN 45545-4:2013
Railway applications – Fire protection on railway vehicles – Part 4: Fire safety requirements for rolling stock design
91.
EN 45545-5:2013+A1:2015
Railway applications – Fire protection on railway vehicles – Part 5: Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles
92.
EN 45545-6:2013
Railway applications – Fire protection on railway vehicles – Part 6: Fire control and management systems
93.
EN 45545-7:2013
Railway applications – Fire protection on railway vehicles – Part 7: Fire safety requirements for flammable liquid and flammable gas installations
94.
EN 50124-1:2017
Railway applications – Insulation coordination – Part 1: Basic requirements – Clearances and creepage distances for all electrical and electronic equipment
95.
EN 50124-2:2017
Railway applications – Insulation coordination – Part 2: Overvoltages and related protection
96.
EN 50125-2:2002
Railway applications – Environmental conditions for equipment – Part 2: Fixed electrical installations
EN 50125-2:2002/AC:2010
97.
EN 50125-3:2003
Railway applications – Environmental conditions for equipment – Part 3: Equipment for signalling and telecommunications
EN 50125-3:2003/AC:2010
98.
EN 50126-1:2017
Railway Applications – The Specification and Demonstration of Reliability, Availability, Maintainability and Safety (RAMS) – Part 1: Generic RAMS Process
99.
EN 50126-2:2017
Railway Applications – The Specification and Demonstration of Reliability, Availability, Maintainability and Safety (RAMS) – Part 2: Systems Approach to Safety
100.
EN 50129:2018
Railway applications – Communication, signalling and processing systems – Safety related electronic systems for signalling
EN 50129:2018/AC:2019-04
101.
EN 50155:2021
Railway applications – Rolling stock – Electronic equipment
102.
EN 50318:2018
Railway applications – Current collection systems – Validation of simulation of the dynamic interaction between pantograph and overhead contact line
EN 50318:2018/A1:2022
103.
EN 50405:2015
Railway applications – Current collection systems – Pantographs, testing methods for contact strips
EN 50405:2015/A1:2016
104.
EN 50463-1:2017
Railway applications – Energy measurement on board trains – Part 1: General
105.
EN 50463-2:2017
Railway applications – Energy measurement on board trains – Part 2: Energy measuring
EN 50463-2:2017/AC:2018-10
106.
EN 50463-3:2017
Railway applications – Energy measurement on board trains – Part 3: Data handling
107.
EN 50463-4:2017
Railway applications – Energy measurement on board trains – Part 4: Communication
108.
EN 50463-5:2017
Railway applications – Energy measurement on board trains – Part 5: Conformity assessment
109.
EN 50533:2011
Railway applications – Three-phase train line voltage characteristics
EN 50533:2011/A1:2016
110.
EN 50562:2018
Railway applications – Fixed installations – Process, protective measures and demonstration of safety for electric traction systems
111.
EN 50592:2016
Railway applications – Testing of rolling stock for electromagnetic compatibility with axle counters
112.
EN 50617-1:2015
Railway applications – Technical parameters of train detection systems for the interoperability of the trans-European railway system – Part 1: Track circuits
113.
EN 50617-2:2015
Railway Applications – Technical parameters of train detection systems for the interoperability of the trans-European railway system – Part 2: Axle counters
EN 50617-2:2015/AC:2016
114.
EN 50641:2020
Railway applications – Fixed installations – Requirements for the validation of simulation tools used for the design of electric traction power supply systems
Restriction: The standard gives presumption of conformity only to clause 4.2.4. of Commission Regulation (EU) No 1301/2014
115.
EN 61375-1:2012
Electronic railway equipment – Train communication network (TCN) – Part 1: General architecture (IEC 61375-1:2012)
116.
EN 61375-2-1:2012
Electronic railway equipment – Train communication network (TCN) – Part 2-1: Wire Train Bus (WTB) (IEC 61375-2-1:2012)
117.
EN 61375-2-2:2012
Electronic railway equipment – Train communication network (TCN) – Part 2-2: Wire Train Bus conformance testing (IEC 61375-2-2:2012)
118.
EN 61375-2-5:2015
Electronic railway equipment – Train communication network (TCN) – Part 2-5: Ethernet train backbone (IEC 61375-2-5:2014)
119.
EN 61375-3-1:2012
Electronic railway equipment – Train communication network (TCN) – Part 3-1: Multifunction Vehicle Bus (MVB) (IEC 61375-3-1:2012)
120.
EN 61375-3-2:2012
Electronic railway equipment – Train communication network (TCN) – Part 3-2: MVB (Multifunction Vehicle Bus) conformance testing (IEC 61375-3-2:2012)
121.
EN 61375-3-3:2012
Electronic railway equipment – Train communication network (TCN) – Part 3-3: CANopen Consist Network (CCN) (IEC 61375-3-3:2012)
122.
EN 62580-1:2016
Electronic railway equipment – On-board multimedia and telematic subsystems for railways – Part 1: General architecture (IEC 62580-1:2015)
EN 62580-1:2016/A11:2017
123.
EN 62621:2016
Railway applications – Fixed installations – Electric traction – Specific requirements for composite insulators used for overhead contact line systems (IEC 62621:2011)
EN 62621:2016/A1:2016
ANNEX II
No
Reference of the standard
Date of withdrawal
1.
EN ISO 3381:2011
Railway applications – Acoustics – Measurement of noise inside railbound vehicles (ISO 3381:2005)
21 November 2023
2.
EN 12080:2017
Railway applications – Axleboxes – Rolling bearings
21 November 2023
3.
EN 12082:2017
Railway applications – Axleboxes – Performance testing
21 November 2023
4.
EN 13103-1:2017
Railway applications – Wheelsets and bogies – Part 1: Design method for axles with external journals
21 November 2023
5.
EN 13230-4:2009
Railway applications – Track – Concrete sleepers and bearers – Part 4: Prestressed bearers for switches and crossings
21 November 2023
6.
EN 13260:2009+A1:2010
Railway applications – Wheelsets and bogies – Wheelsets – Product requirements
21 November 2023
7.
EN 13261:2009+A1:2010
Railway applications – Wheelsets and bogies – Axles – Product requirements
21 November 2023
8.
EN 13262:2004+A2:2011
Railway applications – Wheelsets and bogies – Wheels – Product requirements
21 November 2023
9.
EN 13272:2012
Railway applications – Electrical lighting for rolling stock in public transport systems
21 November 2023
10.
EN 13481-2:2012+A1:2017
Railway applications – Track – Performance requirements for fastening systems – Part 2: Fastening systems for concrete sleepers
21 November 2023
11.
EN 13481-3:2012
Railway applications – Track – Performance requirements for fastening systems – Part 3: Fastening systems for wood sleepers
21 November 2023
12.
EN 13481-5:2012+A1:2017
Railway applications – Track – Performance requirements for fastening systems – Part 5: Fastening systems for slab track with rail on the surface or rail embedded in a channel
21 November 2023
13.
EN 13481-7:2012
Railway applications – Track – Performance requirements for fastening systems – Part 7: Special fastening systems for switches and crossings and check rails
21 November 2023
14.
EN 13674-2:2006+A1:2010
Railway applications – Track – Rail – Part 2: Switch and crossing rails used in conjunction with Vignole railway rails 46 kg/m and above
21 November 2023
15.
EN 13715:2006+A1:2010
Railway applications – Wheelsets and bogies – Wheels – Tread profile
21 November 2023
16.
EN 13749:2011
Railway applications – Wheelsets and bogies – Method of specifying the structural requirements of bogie frames
21 November 2023
17.
EN 13979-1:2003+A2:2011
Railway applications – Wheelsets and bogies – Monobloc wheels – Technical approval procedure – Part 1: Forged and rolled wheels
21 November 2023
18.
EN 14033-1:2017
Railway applications – Track – Railbound construction and maintenance machines – Part 1: Technical requirements for running
21 November 2023
19.
EN 14067-5:2006+A1:2010
Railway applications – Aerodynamics – Part 5: Requirements and test procedures for aerodynamics in tunnels
21 November 2023
20.
EN 14363:2016+A1:2018
Railway applications – Testing and Simulation for the acceptance of running characteristics of railway vehicles – Running Behaviour and stationary tests
Notice: Presumption of conformity shall only be provided when used in conjunction with the technical opinion of the European Union Agency for Railways ERA-OPI-2018-3 (https://www.era.europa.eu/library/opinions-and-technical-advices_en)
21 November 2023
21.
EN 14531-1:2015
Railway applications – Methods for calculation of stopping and slowing distances and immobilization braking – Part 1: General algorithms utilizing mean value calculation for train sets or single vehicles
21 November 2023
22.
EN 14535-1:2005+A1:2011
Railway applications – Brake discs for railway rolling stock – Part 1: Brake discs pressed or shrunk onto the axle or drive shaft, dimensions and quality requirements
21 November 2023
23.
EN 14535-2:2011
Railway applications – Brake discs for railway rolling stock – Part 2: Brake discs mounted onto the wheel, dimensions and quality requirements
21 November 2023
24.
EN 14535-3:2015
Railway applications – Brake discs for railway rolling stock – Part 3: Brake discs, performance of the disc and the friction couple, classification
21 November 2023
25.
EN 14601:2005+A1:2010
Railway applications – Straight and angled end cocks for brake pipe and main reservoir pipe
21 November 2023
26.
EN 14752:2015
Railway applications – Body side entrance systems for rolling stock
21 November 2023
27.
EN 15020:2006+A1:2010
Railway applications – Rescue coupler – Performance requirements, specific interface geometry and test methods
21 November 2023
28.
EN 15153-1:2013+A1:2016
Railway applications – External visible and audible warning devices for trains – Part 1: Head, marker and tail lamps
21 November 2023
29.
EN 15153-2:2013
Railway applications – External visible and audible warning devices for trains – Part 2: Warning horns
21 November 2023
30.
EN 15227:2008+A1:2010
Railway applications – Crashworthiness requirements for railway vehicle bodies
21 November 2023
31.
EN 15302:2008+A1:2010
Railway applications – Method for determining the equivalent conicity
21 November 2023
32.
EN 15427:2008+A1:2010
Railway applications – Wheel/rail friction management – Flange lubrication
21 November 2023
33.
EN 15437-1:2009
Railway applications – Axlebox condition monitoring – Interface and design requirements – Part 1: Track side equipment and rolling stock axlebox
21 November 2023
34.
EN 15437-2:2012
Railway applications – Axlebox condition monitoring – Interface and design requirements – Part 2: Performance and design requirements of on-board systems for temperature monitoring
21 November 2023
35.
EN 15528:2015
Railway applications – Line categories for managing the interface between load limits of vehicles and infrastructure
21 November 2023
36.
EN 15551:2017
Railway applications – Railway rolling stock – Buffers
21 November 2023
37.
EN 15566:2016
Railway applications – Railway rolling stock – Draw gear and screw coupling
21 November 2023
38.
EN 15595:2009+A1:2011
Railway applications – Braking – Wheel slide protection
21 November 2023
39.
EN 15611:2008+A1:2010
Railway applications – Braking – Relay valves
21 November 2023
40.
EN 15612:2008+A1:2010
Railway applications – Braking – Brake pipe accelerator valve
21 November 2023
41.
EN 15624:2008+A1:2010
Railway applications – Braking – Empty-loaded changeover devices
21 November 2023
42.
EN 15625:2008+A1:2010
Railway applications – Braking – Automatic variable load sensing devices
21 November 2023
43.
EN 15654-1:2018
Railway applications – Measurement of vertical forces on wheels and wheelsets – Part 1: On-track measurement sites for vehicles in service
21 November 2023
44.
EN 15663:2009
Railway applications – Definition of vehicle reference masses
EN 15663:2009/AC:2010
21 November 2023
45.
EN 15686:2010
Railway applications – Testing for the acceptance of running characteristics of railway vehicles with cant deficiency compensation system and/or vehicles intended to operate with higher cant deficiency than stated in EN 14363:2005, Annex G
21 November 2023
46.
EN 15687:2010
Railway applications – Testing for the acceptance of running characteristics of freight vehicles with static axle loads higher than 225 kN and up to 250 kN
21 November 2023
47.
EN 15734-1:2010
Railway applications – Braking systems of high speed trains – Part 1: Requirements and definitions
21 November 2023
48.
EN 15734-2:2010
Railway applications – Braking systems of high speed trains – Part 2: Test methods
EN 15734-2:2010/AC:2012
21 November 2023
49.
EN 15746-1:2010+A1:2011
Railway applications – Track – Road-rail machines and associated equipment – Part 1: Technical requirements for running and working
21 November 2023
50.
EN 15746-2:2010+A1:2011
Railway applications – Track – Road-rail machines and associated equipment – Part 2: General safety requirements
21 November 2023
51.
EN 15806:2010
Railway applications – Braking – Static brake testing
21 November 2023
52.
EN 15807:2011
Railway applications – Pneumatic half couplings
21 November 2023
53.
EN 15892:2011
Railway applications – Noise Emission – Measurement of noise inside driver’s cabs
21 November 2023
54.
EN 16116-1:2013
Railway applications – Design requirements for steps, handrails and associated access for staff – Part 1: Passenger vehicles, luggage vans and locomotives
21 November 2023
55.
EN 16116-2:2013
Railway applications – Design requirements for steps, handrails and associated access for staff – Part 2: Freight wagons
21 November 2023
56.
EN 16185-1:2014
Railway applications – Braking systems of multiple unit trains – Part 1: Requirements and definitions
21 November 2023
57.
EN 16185-2:2014
Railway applications – Braking systems of multiple unit trains – Part 2: Test methods
21 November 2023
58.
EN 16186-3:2016+A1:2018
Railway applications – Driver’s cab – Part 3: Design of displays
21 November 2023
59.
EN 16207:2014
Railway applications – Braking – Functional and performance criteria of Magnetic Track Brake systems for use in railway rolling stock
21 November 2023
60.
EN 16334:2014
Railway applications – Passenger Alarm System – System requirements
21 November 2023
61.
EN 45545-2:2013+A1:2015
Railway applications – Fire protection on railway vehicles – Part 2: Requirements for fire behaviour of materials and components
21 November 2023
62.
EN 50122-2:2010
Railway applications – Fixed installations – Electrical safety, earthing and the return circuit – Part 2: Provisions against the effects of stray currents caused by d.c. traction systems
21 November 2023
63.
EN 50122-3:2010
Railway applications – Fixed installations – Electrical safety, earthing and the return circuit – Part 3: Mutual Interaction of a.c. and d.c. traction systems
21 November 2023
64.
EN 50155:2007
Railway applications – Electronic equipment used on rolling stock
EN 50155:2007/AC:2010
EN 50155:2007/AC:2012
21 November 2023
65.
EN 50159:2010
Railway applications – Communication, signalling and processing systems – Safety-related communication in transmission systems
21 November 2023
66.
EN 50163:2004
Railway applications – Supply voltages of traction systems
EN 50163:2004/AC:2010
EN 50163:2004/AC:2013
EN 50163:2004/A1:2007
21 November 2023
67.
EN 50238-1:2003
Railway applications – Compatibility between rolling stock and train detection systems – Part 1: General
EN 50238-1:2003/AC:2014
21 November 2023
68.
EN 50317:2012
Railway applications – Current collection systems – Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line
EN 50317:2012/AC:2012
21 November 2023
69.
EN 50367:2012
Railway applications – Current collection systems – Technical criteria for the interaction between pantograph and overhead line (to achieve free access)
EN 50367:2012/AC:2013
EN 50367:2012/A1:2016
21 November 2023
70.
EN 50388:2012
Railway Applications – Power supply and rolling stock – Technical criteria for the coordination between power supply (substation) and rolling stock to achieve interoperability
EN 50388:2012/AC:2013
21 November 2023
71.
EN 50553:2012
Railway applications – Requirements for running capability in case of fire on board of rolling stock
EN 50553:2012/AC:2013
EN 50553:2012/A1:2016
21 November 2023
72.
EN 62580-1:2016
Electronic railway equipment – On-board multimedia and telematic subsystems for railways – Part 1: General architecture (IEC 62580-1:2015)
21 November 2023
ANNEX III
No
Reference of the standard
Date of withdrawal
1.
EN 14067-6:2018
Railway applications – Aerodynamics – Part 6: Requirements and test procedures for cross wind assessment
21 November 2023
2.
EN 14198:2016+A1:2018
Railway applications – Braking – Requirements for the brake system of trains hauled by locomotives
21 November 2023
3.
EN 50122-1:2011
Railway applications – Fixed installations – Electrical safety, earthing and the return circuit – Part 1: Protective provisions against electric shock
EN 50122-1:2011/A1:2011
EN 50122-1:2011/A2:2016
EN 50122-1:2011/A3:2016
EN 50122-1:2011/A4:2017
EN 50122-1:2011/AC:2012
21 November 2023
4.
EN 50318:2018
Railway applications – Current collection systems – Validation of simulation of the dynamic interaction between pantograph and overhead contact line
21 November 2023
Commission Implementing Decision (EU) 2023/2584 of 15 November 2023 on harmonised standards for the interoperability of the rail systems drafted in support of Directive (EU) 2016/797 of the European Parliament and of the Council (EUR-Lex). Retrieved via LawPlayer, https://lawplayer.com/eu/act/32023D2584
© European Union, https://eur-lex.europa.eu, 1998-2026. Reuse authorised under Commission Decision 2011/833/EU, provided the source is acknowledged.
本頁資料來源：EUR-Lex·整理提供：法律人 LawPlayer· lawplayer.com