My bookmarksSign up free

Commission Implementing Decision (EU) 2024/367 of 23 January 2024 laying down rules for the application of Directive (EU) 2020/2184 of the European Parliament and of the Council by establishing the European positive lists of starting substances, compositions and constituents authorised for use in the manufacture of materials or products that come into contact with water intended for human consumption

Commission Implementing Decision (EU) 2024/367 of 23 January 2024 laying down rules for the application of Directive (EU) 2020/2184 of the European Parliament and of the Council by establishing the European positive lists of starting substances, compositions and constituents authorised for use in the manufacture of materials or products that come into contact with water intended for human consumption

Implementing Decision (EU) 2024/367 · Decision · 9 articles

Data as of 2026-07-04 · Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗

European positive lists

Article 1

This Decision establishes the following: (a) the European positive list of starting substances for organic materials and groups of starting substances for organic materials as set out in Tables 1 and 2 of Annex I respectively; (b) the European positive list of compositions of metallic materials and groups of compositions for metallic materials as set out in Tables 1 and 2 of Annex II respectively; (c) the European positive list of organic constituents of cementitious materials and groups of organic constituents for cementitious materials as set out in Tables 2 and 3 of Annex III respectively; (d) the European positive list of compositions of enamels, ceramic and other inorganic materials as set out in Table 1 of Annex IV.

Definitions

Article 2

For the purpose of this Decision, the following definitions shall apply: (1) ‘material’ means a solid, semi-solid or liquid that is used for the manufacturing of a product that is: (a) an organic composition prepared from one or more starting substances; or (b) a cementitious composition prepared from one or more constituents; or (c) a metallic, enamel, ceramic or other inorganic composition; (2) ‘monomer’ means a substance which is capable of forming covalent bonds with a sequence of additional like or unlike molecules under the conditions of the relevant polymer-forming reaction used for the particular process; (3) ‘organic material’ means a material that mainly consist of carbon-based substances; (4) ‘monomer unit’ means the reacted form of a monomer substance in a polymer; (5) ‘polymer’ means a substance consisting of molecules that are characterised by the sequence of one or more types of monomer units ant that are distributed over a range of molecular weights wherein differences in the molecular weight are primarily attributable to differences in the number of monomer units comprising the following: (a) a simple weight majority of molecules containing at least three monomer units which are covalently bound to at least one other monomer unit or other reactant; (b) less than a simple weight majority of molecules of the same molecular weight; (6) ‘polymerised part’ means the part of a substance composition consisting of molecules characterised by the sequence of one or more types of monomer units. Molecules such as dimers, trimers contribute also to the polymerised part. However, the term ‘polymerised part’ does not cover unreacted monomer or unreacted other reactants; (7) ‘pre-polymer’ is a substance resulting from a polymerisation-type of reaction and that is further reacted into a final polymer in a material or product; (8) ‘organic cementitious constituent’ means an organic substance that is used in the manufacture of cementitious materials; (9) ‘cement’ means a finely ground inorganic material which, when mixed with water, forms a paste that sets and hardens by means of hydration reactions and processes and which, after hardening, retains its strength and stability even under water; (10) ‘cementitious material’ means a material that contains a hydraulic cement in sufficient proportion to act as the main binder by forming a hydrate structure which governs the performance of the material; (11) ‘non-intentionally added species’ means either one of the following: (a) an impurity of a starting substance or organic cementitious constituent or composition; (b) a reaction product or a degradation product of a starting substance or organic cementitious constituent that forms during the processing or use of the material; (c) a reaction product or a degradation product of a starting substance or organic cementitious constituent that forms in contact with water during the use of the material; (12) ‘metallic material’ means a metal or metal alloy used either in bulk form or as metallic plating; (13) ‘ceramic materials’ means inorganic poly- or single crystalline, non-metallic solid materials subjected to high temperature in manufacture; (14) ‘enamel’ means a material that is a vitreous material obtained by melting at temperatures higher than 1 200 °C and fritting of a mixture of inorganic substances; (15) ‘maximum tolerable concentration at the tap’ (MTC tap ) means the maximum permitted concentration of a substance transferred from a specific material into water intended for human consumption.

Transitional provision

Article 3

Starting substances, compositions and constituents which have been approved by a Member State competent authority during the period from 13 July 2021 to 31 December 2026 in accordance with national provisions may be used in the manufacture of materials or products that come into contact with water intended for human consumption until 31 December 2032, provided they comply with the parametric value of 5 μg/l Pb (lead) at the tap as set out in Part B of Annex I to Directive (EU) 2020/2184.

Entry into force

Article 4

This Decision shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union. It shall apply from 31 December 2026.

Supplementary provisions

EUROPEAN POSITIVE LIST OF STARTING SUBSTANCES FOR ORGANIC MATERIALS

ANNEX ISupplementary provisions

ANNEX I EUROPEAN POSITIVE LIST OF STARTING SUBSTANCES FOR ORGANIC MATERIALS Table 1 European positive lists of individual starting substances for organic materials EUPL Number EC Number CAS Number FCM substance Number (A) Starting substance name Technical function (B) Drinking water contact materials (C) Maximum Tolerable Concentration at the tap in organic materials (MTC tap, organics ) in μg/l Total Maximum Tolerable Concentration at the tap (MTC(T) tap, organics ) in μg/l (D) Conditions of use Expiry date Value for the starting substance Values for other relevant chemical species (E) 0001     1 albumin Monomer or other reactant All         31 December 2028 0002     2 albumin, coagulated by formaldehyde Monomer or other reactant All         31 December 2028 0003     7 acetylacetic acid, salts Additive or polymer production aid All         31 December 2028 0004     18 aluminium calcium hydroxide phosphite, hydrate Additive or polymer production aid All     For aluminium, refer to Annex V. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0005     21 carbonic acid, salts Additive Polymer production aid Aid to polymerisation All       If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0006     24 cotton fibres Additive All         31 December 2028 0007     29 di- n -octyltin bis(ethyl maleate) Additive or polymer production aid All     (10)   31 December 2034 0008     30 di- n -octyltin 1,4-butanediol bis(mercaptoacetate) Additive or polymer production aid All     (10)   31 December 2028 0009     32 di- n -octyltin dimaleate, polymers (n = 2-4) Additive or polymer production aid All     (10)   31 December 2034 0010     33 di- n -octyltin thiobenzoate 2-ethylhexyl mercaptoacetate Additive or polymer production aid All     (10)   31 December 2028 0011     34 ethylhydroxymethylcellulose Additive or polymer production aid All         31 December 2028 0012     35 ethylhydroxypropylcellulose Additive or polymer production aid All         31 December 2028 0013     36 fats and oils, from animal or vegetable food sources Polymer production aid Additive Other (processing aid) All         31 December 2028 0014     37 fats and oils, hydrogenated, from animal or vegetable food sources Polymer production aid Additive All         31 December 2028 0015     39 glass microballs Additive All         31 December 2028 0016     54 glycerol monooleate, ester with ascorbic acid Additive or polymer production aid All         31 December 2028 0017     55 glycerol monooleate, ester with citric acid Additive or polymer production aid All         31 December 2028 0018     56 glycerol monopalmitate, ester with ascorbic acid Additive or polymer production aid All         31 December 2028 0019     57 glycerol monopalmitate, ester with citric acid Additive or polymer production aid All         31 December 2028 0020     58 glycerol monostearate, ester with ascorbic acid Additive or polymer production aid All         31 December 2028 0021     59 glycerol monostearate, ester with citric acid Additive or polymer production aid All         31 December 2028 0022     60 glycine, salts Additive or polymer production aid All         31 December 2028 0023     62 lysine, salts Additive or polymer production aid All         31 December 2028 0024     63 manganese pyrophosphite Additive or polymer production aid All     For manganese, refer to Annex V. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0025     64 methylhydroxymethylcellulose Additive or polymer production aid All         31 December 2028 0026     70 polyacrylic acid, salts Additive or polymer production aid All     (21)   31 December 2037 0027     71 polydimethylsiloxane, γ-hydroxy propylated Additive or polymer production aid All 300       31 December 2034 0028     72 polyester of adipic acid with glycerol or pentaerythritol, esters with even numbered, unbranched C 12 -C 22 fatty acids Additive or polymer production aid Plastics     (31) Purity of starting substance: the fraction with molecular weight below 1 000 Da shall not exceed 5 % (w/w). 31 December 2034 0029     74 polyethyleneglycol diricinoleate Additive or polymer production aid All 2100       31 December 2034 0030     75 polyethyleneglycol esters of aliph. monocarb. acids (C 6 -C 22 ) and their ammonium and sodium sulfates Additive Polymer production aid Other (processing aid) All     For ammonium, refer to Annex V.   31 December 2037 0031     76 polyethylene glycol (EO = 1-30, typically 5) ether of butyl 2-cyano 3-(4-hydroxy-3-methoxyphenyl) acrylate Additive or polymer production aid Plastics 2,5     Only for use in PET. 31 December 2034 0032     77 polyethyleneglycol (EO = 1-30, typically 5) ether of butyl-2-cyano-3-(4-hydroxyphenyl) acrylate Additive or polymer production aid Plastics 2,5     Only for use in PET. 31 December 2034 0033     79 polyoxyalkyl (C 2 -C 4 ) dimethyl polysiloxane Additive Polymer production aid All         31 December 2034 0034     81 propylhydroxyethylcellulose Additive or polymer production aid All         31 December 2028 0035     82 propylhydroxymethylcellulose Additive or polymer production aid All         31 December 2028 0036     83 propylhydroxypropylcellulose Additive or polymer production aid All         31 December 2028 0037     84 silicates, natural (with the exception of asbestos) Additive All       If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0038     85 silicates, natural, silanated (with the exception of asbestos) Additive All       If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0039     86 silicic acid, silylated Additive All       If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0040     87 silicon dioxide, silanated Additive All       For synthetic amorphous silicon dioxide, silanated: primary particles of 1–100 nm which are aggregated to a size of 0,1–1 μm and may form agglomerates within the size distribution of 0,3 μm to the mm size. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0041     88 sodium monoalkyl dialkylphenoxybenzenedisulfonate Additive or polymer production aid All 450       31 December 2028 0042     90 taurine, salts Additive or polymer production aid All         31 December 2031 0043     91 tetradecyl-polyethyleneglycol(EO = 3-8) ether of glycolic acid Additive or polymer production aid All 750       31 December 2034 0044     92 tricyclodecanedimethanol bis(hexahydrophthalate) Additive or polymer production aid All 2,5       31 December 2028 0045     93 waxes, paraffinic, refined, derived from petroleum based or synthetic hydrocarbon feedstocks, low viscosity Monomer or other reactant (base oil) Additive Polymer production aid Other (processing aid) All 2,5     Average molecular weight not less than 350 Da. Viscosity at 100 °C not less than 2,5 cSt (2,5 × 10 -6 m 2 /s). Content of hydrocarbons with carbon number less than 25, not more than 40 % (w/w). 31 December 2028 0046     94 waxes, refined, derived from petroleum based or synthetic hydrocarbon feedstocks, high viscosity Additive Polymer production aid All       Average molecular weight not less than 500 Da. Viscosity at 100 °C not less than 11 cSt (11 × 10 -6 m 2 /s). Content of mineral hydrocarbons with carbon number less than 25, not more than 5 % (w/w). 31 December 2028 0047     95 white mineral oils, paraffinic, derived from petroleum based hydrocarbon feedstocks Monomer or other reactant (base oil) Additive Polymer production aid All       Average molecular weight not less than 480 Da. Viscosity at 100 °C not less than 8,5 cSt (8,5 × 10 -6 m 2 /s). Content of mineral hydrocarbons with carbon number less than 25, not more than 5 % (w/w). 31 December 2028 0048     97 petroleum hydrocarbon resins (hydrogenated) Monomer or other reactant (resin) Additive All 150 (Note: based on a notified national approval)     Petroleum hydrocarbon resins, hydrogenated are produced by the catalytic or thermal polymerisation of dienes and olefins of the aliphatic, alicyclic and/or monobenzenoidarylalkene types from distillates of cracked petroleum stocks with a boiling range not greater than 220 °C, as well as the pure monomers found in these distillation streams, subsequently followed by distillation, hydrogenation and additional processing. Properties: — Viscosity at 120 °C: > 3 Pa.s, — Softening point: > 95 °C as determined by ASTM Method E 28-67, — Bromine number: < 40 (ASTM D1159), — The colour of a 50 % solution in toluene < 11 on the Gardner scale, — Residual aromatic monomer ≤50 ppm. 31 December 2028 0049   50-00-0 98 formaldehyde Monomer or other reactant All     (15)   31 December 2028 0050   50-70-4 100 sorbitol Monomer or other reactant Additive All         31 December 2037 0051   50-81-7 101 ascorbic acid Monomer or other reactant All         31 December 2037 0052   56-81-5 103 glycerol Monomer or other reactant Additive Polymer production aid Other (processing aid) All         31 December 2037 0053   57-09-0 104 hexadecyltrimethylammonium bromide Additive Polymer production aid All 300       31 December 2034 0054   57-10-3 105 palmitic acid Monomer or other reactant Polymer production aid Other (processing aid) All         31 December 2037 0055   57-11-4 106 stearic acid Monomer or other reactant Additive Polymer production aid Aid to polymerisation Other (processing aid) All         31 December 2037 0056   57-13-6 107 urea Monomer or other reactant Additive Polymer production aid Other (processing aid) All         31 December 2037 0057   57-50-1 108 sucrose Monomer or other reactant All         31 December 2037 0058   60-00-4 111 ethylenediaminetetraacetic acid (EDTA) Additive Polymer production aid All 60       31 December 2034 0059   60-33-3 112 linoleic acid Monomer or other reactant All         31 December 2037 0060   64-17-5 113 ethanol Monomer or other reactant Additive Polymer production aid All         31 December 2034 0061   64-18-6 114 formic acid Monomer or other reactant Polymer production aid Other (processing aid) All         31 December 2034 0062   64-19-7 115 acetic acid Monomer or other reactant Additive Polymer production aid Other (processing aid) All         31 December 2037 0063   65-85-0 116 benzoic acid Monomer or other reactant Polymer production aid Aid to polymerisation All         31 December 2034 0064   67-56-1 117 methanol Monomer or other reactant All         31 December 2034 0065   67-63-0 118 2-propanol Monomer or other reactant Polymer production aid All         31 December 2034 0066   67-64-1 119 acetone Polymer production aid All         31 December 2034 0067   67-68-5 120 dimethyl sulfoxide Polymer production aid All         31 December 2034 0068   69-72-7 121 salicylic acid Monomer or other reactant, aid to polymerisation, Other (processing aid) Coatings Rubber         31 December 2028 0069   71-23-8 122 1-propanol Monomer or other reactant All         31 December 2034 0070   71-36-3 123 1-butanol Monomer or other reactant Polymer production aid All         31 December 2034 0071   71-41-0 124 1-pentanol Monomer or other reactant All         31 December 2034 0072   74-85-1 125 ethylene Monomer or other reactant All         31 December 2034 0073   74-86-2 126 acetylene Monomer or other reactant All         31 December 2034 0074   75-01-4 127 vinyl chloride Monomer or other reactant All 0,5     Maximum residual content in the final material (QM) = 1 mg/kg in the product. 31 December 2028 0075   75-07-0 128 acetaldehyde Monomer or other reactant All     (1)   31 December 2028 0076   75-21-8 129 ethylene oxide Monomer or other reactant All 0,1     Maximum residual content in the final material (QM) = 1 mg/kg in the product. Verification of compliance by residual content per water contact surface area (QMA) in case of reaction with water. 31 December 2028 0077   75-35-4 130 vinylidene chloride Monomer or other reactant All 0,1     Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. 31 December 2028 0078   75-37-6 131 1,1-difluoroethane Additive or polymer production aid All         31 December 2034 0079   75-38-7 132 vinylidene fluoride Monomer or other reactant All 250       31 December 2034 0080   75-44-5 133 carbonyl chloride Monomer or other reactant All 0,1     Maximum residual content in the final material (QM) = 1 mg/kg in the product. Verification of compliance by residual content per water contact surface area (QMA) in case of reaction with water. 31 December 2034 0081   75-45-6 134 chlorodifluoromethane Additive or polymer production aid All 300     Content of chlorofluoromethane less than 1 mg/kg of the substance. 31 December 2034 0082   76-22-2 136 camphor Additive or polymer production aid All         31 December 2034 0083   77-62-3 137 2,2′-methylenebis(4-methyl-6-(1- methylcyclohexyl)phenol) Additive All     (5)   31 December 2034 0084   77-90-7 138 tri- n -butyl acetyl citrate Additive or polymer production aid All     (31)   31 December 2034 0085   77-92-9 139 citric acid Monomer or other reactant Polymer production aid Other (processing aid) All         31 December 2037 0086   77-93-0 140 citric acid, triethyl ester Additive or polymer production aid All     (31)   31 December 2034 0087   77-99-6 141 1,1,1-trimethylolpropane Monomer or other reactant Additive All 300       31 December 2034 0088   78-08-0 142 vinyltriethoxysilane Additive Other (processing aid) All 2,5     Only to be used as a surface treatment agent. 31 December 2034 0089   78-78-4 143 isopentane Additive or polymer production aid All         31 December 2034 0090   78-79-5 144 2-methyl–1,3-butadiene (isoprene) Monomer or other reactant All 0,1     Maximum residual content in the final material (QM) = 1 mg/kg in the product. 31 December 2028 0091   79-06-1 145 acrylamide Monomer or other reactant All 0,1       31 December 2028 0092   79-09-4 146 propionic acid Monomer or other reactant All         31 December 2037 0093   79-10-7 147 acrylic acid Monomer or other reactant All     (21)   31 December 2034 0094   79-38-9 148 chlorotrifluoroethylene Monomer or other reactant All 0,1     Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. 31 December 2034 0095   79-39-0 149 methacrylamide Monomer or other reactant All 0,1       31 December 2034 0096   79-41-4 150 methacrylic acid Monomer or other reactant All     (22)   31 December 2034 0097   80-05-7 151 2,2-bis(4-hydroxyphenyl)propane Monomer or other reactant Additive All 2,5     Technical function as additive is only accepted for plastics. 31 December 2028 0098   80-07-9 152 4,4′-dichlorodiphenyl sulfone Monomer or other reactant All 2,5       31 December 2034 0099   80-08-0 153 4,4′-diaminodiphenyl sulfone Monomer or other reactant All 250       31 December 2034 0100   80-09-1 154 4,4′-dihydroxydiphenyl sulfone Monomer or other reactant All 2,5       31 December 2028 0101   80-56-8 155 α-pinene Monomer or other reactant All         31 December 2034 0102   80-62-6 156 methacrylic acid, methyl ester Monomer or other reactant All     (22)   31 December 2034 0103   84-74-2 157 phthalic acid, dibutyl ester ('DBP') Additive All 6,0   (31) (35) Only to be used as: (a) plasticiser; (b) technical support agent in polyolefins in concentrations up to 0,05 % in the product. 31 December 2028 0104   85-44-9 158 phthalic anhydride Monomer or other reactant Aid to polymerisation All         31 December 2034 0105   85-68-7 159 phthalic acid, benzyl butyl ester ('BBP') Additive All 300   (31) (35) Only to be used as (a) plasticiser; (b) technical support agent in concentrations up to 0,1 % in the product. ≤ 5% as sum of all phthalates. 31 December 2028 0106   87-18-3 160 salicylic acid, 4- tert -butylphenyl ester Additive or polymer production aid All 600 For the MTC tap values of degradation products, refer to Table 4.     31 December 2028 0107   87-69-4 161 L-(+)-tartaric acid Monomer or other reactant Polymer production aid Other (processing aid) All         31 December 2034 0108   87-78-5 162 mannitol Monomer or other reactant Polymer production aid All         31 December 2028 0109   88-24-4 163 2,2′-methylene bis(4-ethyl-6- tert -butylphenol) Additive All     (13)   31 December 2034 0110   88-68-6 164 2-aminobenzamide Additive or polymer production aid Plastics 2,5     Only for use in PET. 31 December 2034 0111   88-99-3 165 o -phthalic acid Monomer or other reactant All         31 December 2034 0112   89-32-7 166 pyromellitic anhydride Monomer or other reactant All 2,5 – expressed as the sum of pyromellitic anhydride and pyromellitc acid       31 December 2034 0113   91-08-7 167 2,6-toluene diisocyanate Monomer or other reactant All     (16) Maximum residual content in the final material (QM) = 1 mg/kg in product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2034 0114   91-76-9 168 2,4-diamino-6-phenyl-1,3,5- triazine Monomer or other reactant All 250       31 December 2034 0115   91-97-4 169 3,3′-dimethyl–4,4′-diisocyanato biphenyl Monomer or other reactant All     (16) Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2034 0116   92-88-6 170 4,4′-dihydroxybiphenyl Monomer or other reactant All 300       31 December 2034 0117   93-58-3 171 benzoic acid, methyl ester Additive or polymer production aid All         31 December 2034 0118   93-89-0 172 benzoic acid, ethyl ester Additive or polymer production aid All         31 December 2034 0119   94-13-3 173 4-hydroxybenzoic acid, propyl ester Additive or polymer production aid All         31 December 2034 0120   95-48-7 174 o -cresol Monomer or other reactant All         31 December 2034 0121   96-05-9 175 methacrylic acid, allyl ester Monomer or other reactant All 2,5       31 December 2034 0122   96-33-3 176 acrylic acid, methyl ester Monomer or other reactant All     (21)   31 December 2034 0123   96-49-1 177 ethylene carbonate Monomer or other reactant All 1500 - expressed as ethyleneglycol       31 December 2034 0124   96-69-5 178 4,4′-thiobis(6- tert -butyl-3-methyl phenol) Additive All 24       31 December 2034 0125   97-23-4 179 2,2′-dihydroxy–5,5′-dichlorodiphenylmethane Additive or polymer production aid All 600       31 December 2028 0126   97-53-0 180 eugenol Monomer or other reactant All     (32)   31 December 2034 0127   97-63-2 181 methacrylic acid, ethyl ester Monomer or other reactant All     (22)   31 December 2034 0128   97-65-4 182 itaconic acid Monomer or other reactant Polymer production aid Other (processing aid) All         31 December 2034 0129   97-86-9 183 methacrylic acid, isobutyl ester Monomer or other reactant All     (22)   31 December 2034 0130   97-88-1 184 methacrylic acid, butyl ester Monomer or other reactant All     (22)   31 December 2034 0131   97-90-5 185 methacrylic acid, diester with ethyleneglycol Monomer or other reactant All 2,5       31 December 2034 0132   98-54-4 186 4- tert -butylphenol Monomer or other reactant All 2,5       31 December 2028 0133   98-83-9 187 α-methylstyrene Monomer or other reactant All 2,5       31 December 2034 0134   99-63-8 188 isophthalic acid dichloride Monomer or other reactant All     (26)   31 December 2034 0135   99-76-3 189 4-hydroxybenzoic acid, methyl ester Additive or polymer production aid All         31 December 2034 0136   99-96-7 190 p -hydroxybenzoic acid Monomer or other reactant Polymer production aid Other (processing aid) All         31 December 2034 0137   100-20-9 191 terephthalic acid dichloride Monomer or other reactant All     (27)   31 December 2034 0138     192 phthalic acid Monomer or other reactant Additive All     (27)   31 December 2034 0139   100-42-5 193 styrene Monomer or other reactant All         31 December 2028 0140   100-51-6 194 benzyl alcohol Monomer or other reactant Additive Polymer production aid All         31 December 2034 0141   100-52-7 195 benzaldehyde Additive or polymer production aid All       There is a risk that the migration of the substance deteriorates the organoleptic characteristics of the drinking water and then, that the product does not comply with Commission Implementing Decision (EU) 2024/368. 31 December 2034 0142   100-97-0 196 hexamethylenetetramine Monomer or other reactant Aid to polymerisation All     (15)   31 December 2034 0143   101-43-9 197 methacrylic acid, cyclohexyl ester Monomer or other reactant All 2,5       31 December 2034 0144   101-68-8 198 diphenylmethane–4,4′-diisocyanate Monomer or other reactant All     (16) Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2034 0145   101-90-6 199 resorcinol diglycidyl ether Monomer or other reactant All 0,1     For indirect water contact only, behind a PET layer. Verification of compliance by residual content per water contact surface area (QMA); QMA = 0,0083 dm -1 . 31 December 2028 0146   102-08-9 200 N , N ′-diphenylthiourea Additive or polymer production aid All 150       31 December 2034 0147   102-09-0 201 diphenyl carbonate Monomer or other reactant All 2,5       31 December 2034 0148   102-39-6 202 (1,3-phenylenedioxy)diacetic acid Monomer or other reactant All 2,5       31 December 2028 0149   102-40-9 203 1,3-bis(2-hydroxyethoxy)benzene Monomer or other reactant All 2,5       31 December 2034 0150   102-60-3 204 N , N , N ′, N ′-tetrakis(2-hydroxypropyl)ethylenediamine Monomer or other reactant Additive or polymer production aid All         31 December 2034 0151   103-11-7 206 acrylic acid, 2-ethylhexyl ester Monomer or other reactant All 2,5       31 December 2034 0152   103-23-1 207 adipic acid, bis(2-ethylhexyl) ester Additive All 900   (31)   31 December 2034 0153   103-90-2 208 N -(4-hydroxyphenyl) acetamide Monomer or other reactant All 2,5       31 December 2034 0154   104-76-7 209 2-ethyl-1-hexanol Monomer or other reactant All 1500       31 December 2034 0155   105-08-8 210 1,4-bis(hydroxymethyl)cyclohexane Monomer or other reactant All         31 December 2034 0156   105-38-4 211 propionic acid, vinyl ester Monomer or other reactant All     (1)   31 December 2034 0157   105-60-2 212 caprolactam Monomer or other reactant Additive Aid to polymerisation All     (4) When used for coatings, only for hot curing coatings. 31 December 2034 0158   105-62-4 213 1,2-propyleneglycol dioleate Additive or polymer production aid All         31 December 2028 0159   106-14-9 214 12-hydroxystearic acid Monomer or other reactant Additive Other (processing aid) All         31 December 2034 0160   106-31-0 215 butyric anhydride Monomer or other reactant All         31 December 2034 0161   106-44-5 216 p -cresol Monomer or other reactant All         31 December 2034 0162   106-46-7 217 1,4-dichlorobenzene Monomer or other reactant All 600       31 December 2028 0163   106-63-8 218 acrylic acid, isobutyl ester Monomer or other reactant All     (21)   31 December 2034 0164   106-89-8 219 epichlorohydrin Monomer or other reactant All 0,1     Maximum residual content in the final material (QM) = 1 mg/kg in the product. Verification of compliance by residual content per water contact surface area (QMA) in case of reaction with water. 31 December 2028 0165   106-91-2 220 methacrylic acid, 2,3-epoxypropyl ester Monomer or other reactant All 1,0     Verification of compliance by residual content per water contact surface area (QMA) in case of reaction with water. 31 December 2028 0166   106-97-8 221 butane Additive or polymer production aid All         31 December 2034 0167   106-98-9 222 1-butene Monomer or other reactant All         31 December 2034 0168   106-99-0 223 butadiene Monomer or other reactant All 0,1     Maximum residual content in the final material (QM) = 1 mg/kg in the product. 31 December 2028 0169   107-13-1 225 acrylonitrile Monomer or other reactant All 0,1       31 December 2028 0170   107-15-3 226 ethylenediamine Monomer or other reactant Polymer production aid All 600       31 December 2034 0171   107-21-1 227 ethyleneglycol Monomer or other reactant All     (2)   31 December 2034 0172   107-92-6 229 butyric acid Monomer or other reactant All         31 December 2037 0173   108-01-0 230 dimethylaminoethanol Monomer or other reactant All 900       31 December 2034 0174   108-05-4 231 acetic acid, vinyl ester Monomer or other reactant All 600       31 December 2028 0175   108-24-7 232 acetic anhydride Monomer or other reactant Additive Polymer production aid All         31 December 2034 0176   108-30-5 233 succinic anhydride Monomer or other reactant All         31 December 2034 0177   108-31-6 234 maleic anhydride Monomer or other reactant Additive Polymer production aid Other (processing aid) All     (3)   31 December 2034 0178   108-39-4 235 m -cresol Monomer or other reactant All         31 December 2034 0179   108-45-2 236 1,3-phenylenediamine Monomer or other reactant All 0,1     A detection limit of 0,1 μg/l applies. 31 December 2028 0180   108-46-3 237 1,3-dihydroxybenzene (resorcinol) Monomer or other reactant Other (processing aid) All 120       31 December 2034 0181   108-55-4 238 glutaric anhydride Monomer or other reactant Other (processing aid) All         31 December 2034 0182   108-78-1 239 2,4,6-triamino-1,3,5-triazine (melamine) Monomer or other reactant All 125       31 December 2028 0183   108-91-8 240 cyclohexylamine Monomer or other reactant Aid to polymerisation All         31 December 2028 0184   108-95-2 241 phenol Monomer or other reactant All 150       31 December 2028 0185   109-43-3 242 sebacic acid, dibutyl ester Additive Polymer production aid All     (31)   31 December 2034 0186   109-53-5 243 isobutyl vinyl ether Monomer or other reactant All 2,5     Verification of compliance by residual content per water contact surface area (QMA) in case of reaction with water. 31 December 2034 0187   109-66-0 244 pentane Additive or polymer production aid All         31 December 2034 0188   109-67-1 245 1-pentene Monomer or other reactant All 250       31 December 2034 0189   109-99-9 246 tetrahydrofuran Monomer or other reactant Polymer production aid All 30       31 December 2028 0190   110-15-6 247 succinic acid Monomer or other reactant Other (processing aid) All         31 December 2037 0191   110-16-7 248 maleic acid Monomer or other reactant Other (processing aid) All     (3)   31 December 2034 0192   110-17-8 249 fumaric acid Monomer or other reactant Other (processing aid) All         31 December 2034 0193   110-30-5 250 N , N ′-ethylenebisstearamide Additive Polymer production aid All         31 December 2034 0194   110-31-6 251 N , N ′-ethylenebisoleamide Additive or polymer production aid All         31 December 2034 0195   110-44-1 252 sorbic acid Additive or polymer production aid All         31 December 2034 0196   110-60-1 253 1,4-diaminobutane Monomer or other reactant All         31 December 2034 0197   110-63-4 254 1,4-butanediol Monomer or other reactant Additive All     (29)   31 December 2034 0198   110-88-3 255 trioxane Monomer or other reactant All 250       31 December 2034 0199   110-94-1 256 glutaric acid Monomer or other reactant Other (processing aid) All         31 December 2037 0200   111-06-8 258 palmitic acid, butyl ester Additive or polymer production aid All         31 December 2028 0201   111-14-8 259 heptanoic acid Additive or polymer production aid All         31 December 2034 0202   111-20-6 260 sebacic acid Monomer or other reactant Additive Other (processing aid) All         31 December 2034 0203   111-40-0 261 diethylenetriamine Monomer or other reactant All 250       31 December 2034 0204   111-41-1 262 N -(2-aminoethyl)ethanolamine Additive or polymer production aid All 2,5     For indirect water contact only, behind a PET layer. 31 December 2028 0205   111-46-6 263 diethyleneglycol Monomer or other reactant Aid to polymerisation All     (2)   31 December 2034 0206   111-66-0 264 1-octene Monomer or other reactant All 750       31 December 2034 0207   111-87-5 265 1-octanol Monomer or other reactant All         31 December 2034 0208   112-27-6 266 triethyleneglycol Monomer or other reactant Additive Other (processing aid) All         31 December 2034 0209   112-30-1 267 1-decanol Monomer or other reactant All         31 December 2034 0210   112-41-4 268 1-dodecene Monomer or other reactant All 2,5       31 December 2034 0211   112-60-7 269 tetraethyleneglycol Monomer or other reactant All         31 December 2034 0212   112-80-1 270 oleic acid Monomer or other reactant Additive Other (processing aid) All         31 December 2028 0213   112-84-5 271 erucamide Polymer production aid Other (processing aid) All         31 December 2034 0214   112-85-6 272 behenic acid Monomer or other reactant All         31 December 2037 0215   112-86-7 273 erucic acid Monomer or other reactant Other (processing aid) All         31 December 2028 0216   112-96-9 274 octadecyl isocyanate Monomer or other reactant All     (16) Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2034 0217   115-07-1 275 propylene Monomer or other reactant All         31 December 2034 0218   115-11-7 276 isobutene Monomer or other reactant All         31 December 2034 0219   115-27-5 277 hexachloroendomethylenetetrahydrophthalic anhydride Monomer or other reactant Other (processing aid) All 0,1       31 December 2034 0220   115-28-6 278 hexachloroendomethylenetetrahydrophthalic acid Monomer or other reactant Other (processing aid) All 0,1       31 December 2028 0221   115-77-5 279 pentaerythritol Monomer or other reactant Additive All         31 December 2034 0222   115-96-8 280 phosphoric acid, trichloroethyl ester Additive or polymer production aid All 0,1       31 December 2028 0223   116-14-3 281 tetrafluoroethylene Monomer or other reactant All 2,5     When used for coatings, only as monomer for polymeric additives. 31 December 2028 0224   116-15-4 282 hexafluoropropylene Monomer or other reactant All 0,1   (38)   31 December 2028 0225   117-81-7 283 phthalic acid, bis(2-ethylhexyl) ester ('DEHP') Additive Polymer production aid All 30   (31) (35) Only to be used as: (a) plasticiser; or (b) technical support agent in concentrations up to 0,1 % in the product. 31 December 2028 0226   119-36-8 284 salicylic acid, methyl ester Additive or polymer production aid All 1500       31 December 2028 0227   119-47-1 285 2,2′-methylene bis(4-methyl-6- tert -butylphenol) Additive All     (13)   31 December 2028 0228   119-61-9 286 benzophenone Aid to polymerisation All 30       31 December 2028 0229   120-47-8 287 4-hydroxybenzoic acid, ethyl ester Additive or polymer production aid All         31 December 2034 0230   120-61-6 288 terephthalic acid, dimethyl ester Monomer or other reactant All         31 December 2034 0231   120-80-9 289 1,2-dihydroxybenzene Monomer or other reactant All 300       31 December 2028 0232   121-79-9 290 gallic acid, propyl ester Additive All     (19)   31 December 2034 0233   121-91-5 291 isophthalic acid Monomer or other reactant Other (processing aid) All     (26)   31 December 2034 0234   122-20-3 292 triisopropanolamine Monomer or other reactant Aid to polymerisation All 250       31 December 2034 0235   122-52-1 293 phosphorous acid, triethyl ester Monomer or other reactant All 0,1     Maximum residual content in the final material (QM) = 1 mg/kg in the product. 31 December 2034 0236   123-28-4 294 thiodipropionic acid, didodecyl ester Additive or polymer production aid All     (14)   31 December 2034 0237   123-31-9 295 1,4-dihydroxybenzene Monomer or other reactant All 30       31 December 2028 0238   123-38-6 296 propionaldehyde Monomer or other reactant All         31 December 2034 0239   123-62-6 297 propionic anhydride Monomer or other reactant All         31 December 2034 0240   123-72-8 298 butyraldehyde Monomer or other reactant All         31 December 2034 0241   123-76-2 299 levulinic acid Additive or polymer production aid All         31 December 2037 0242   123-86-4 300 acetic acid, butyl ester Polymer production aid All         31 December 2034 0243   123-95-5 301 stearic acid, butyl ester Additive All         31 December 2028 0244   123-99-9 302 azelaic acid Monomer or other reactant All         31 December 2034 0245   124-04-9 303 adipic acid Monomer or other reactant All         31 December 2034 0246   124-07-2 304 caprylic acid Monomer or other reactant All         31 December 2037 0247   124-09-4 305 hexamethylenediamine Monomer or other reactant All 120       31 December 2034 0248   124-26-5 306 stearamide Other (processing aid) All         31 December 2034 0249   124-38-9 307 carbon dioxide Additive or polymer production aid All         31 December 2037 0250   126-13-6 308 sucrose acetate isobutyrate Additive or polymer production aid All         31 December 2028 0251   126-14-7 309 sucrose octaacetate Additive or polymer production aid All         31 December 2028 0252   126-30-7 310 2,2-dimethyl–1,3-propanediol (neopentylglycol) Monomer or other reactant All 2,5 - expressed as mono and diethylene glycols       31 December 2034 0253   126-58-9 311 dipentaerythritol Monomer or other reactant All         31 December 2034 0254   126-98-7 312 methacrylonitrile Monomer or other reactant All 0,1       31 December 2034 0255   127-63-9 313 diphenyl sulfone Monomer or other reactant All 150       31 December 2034 0256   127-91-3 314 β-pinene Monomer or other reactant All         31 December 2028 0257   128-37-0 315 2,6-di- tert -butyl- p -cresol Additive Polymer production aid All 150 For the MTC tap values of degradation products, refer to Table 4.     31 December 2034 0258   131-17-9 316 phthalic acid, diallyl ester Monomer or other reactant All 0,1       31 December 2034 0259   131-53-3 317 2,2′-dihydroxy-4-methoxybenzophenone Additive or polymer production aid All     (8)   31 December 2034 0260   131-56-6 318 2,4-dihydroxybenzophenone Aid to polymerisation All     (8)   31 December 2034 0261   131-57-7 319 2-hydroxy-4-methoxybenzophenone Additive or polymer production aid All     (8)   31 December 2034 0262   136-60-7 320 benzoic acid, butyl ester Additive or polymer production aid All         31 December 2034 0263   137-66-6 321 ascorbyl palmitate Additive or polymer production aid All         31 December 2034 0264   140-88-5 323 acrylic acid, ethyl ester Monomer or other reactant All     (21)   31 December 2034 0265   141-22-0 324 ricinoleic acid Monomer or other reactant All 2100       31 December 2028 0266   141-32-2 325 acrylic acid, n -butyl ester Monomer or other reactant All, except rubber     (21)   31 December 2034 0267   141-43-5 326 2-aminoethanol Monomer or other reactant All 2,5     For indirect water contact only, behind a PET layer, except when used for coatings. 31 December 2034 0268   141-78-6 327 acetic acid, ethyl ester Additive All         31 December 2034 0269   141-82-2 328 malonic acid Monomer or other reactant Other (processing aid) All         31 December 2034 0270   142-62-1 329 hexanoic acid Monomer or other reactant All         31 December 2037 0271   143-07-7 330 lauric acid Monomer or other reactant Additive Polymer production aid Other (processing aid) All         31 December 2037 0272   143-08-8 331 1-nonanol Monomer or other reactant All         31 December 2034 0273   143-28-2 332 oleyl alcohol Monomer or other reactant Additive Polymer production aid All         31 December 2034 0274   144-62-7 333 oxalic acid Monomer or other reactant Other (processing aid) All 300       31 December 2034 0275   151-56-4 334 ethyleneimine Monomer or other reactant All 0,1       31 December 2028 0276   301-02-0 335 oleamide Additive Polymer production aid Other (processing aid) All         31 December 2028 0277   334-48-5 336 n -decanoic acid Monomer or other reactant Additive Other (processing aid) All         31 December 2037 0278   345-92-6 337 4,4′-difluorobenzophenone Monomer or other reactant All 2,5       31 December 2034 0279   373-49-9 338 palmitoleic acid Monomer or other reactant All         31 December 2037 0280   409-21-2 339 silicon carbide Monomer or other reactant Additive All         31 December 2028 0281   461-58-5 340 dicyanodiamide Monomer or other reactant All 3000       31 December 2034 0282   498-66-8 341 bicyclo[2.2.1]hept-2-ene Monomer or other reactant All 2,5       31 December 2034 0283   502-44-3 342 caprolactone Monomer or other reactant All     (28)   31 December 2034 0284   504-63-2 343 1,3-propanediol Monomer or other reactant All 2,5       31 December 2034 0285   505-65-7 344 1,4-butanediol formal Monomer or other reactant All 2,5   (15) (29)   31 December 2034 0286   506-30-9 345 arachidic acid Monomer or other reactant All         31 December 2037 0287   514-10-3 346 abietic acid Monomer or other reactant All         31 December 2028 0288   528-44-9 347 trimellitic acid Monomer or other reactant All     (20)   31 December 2028 0289   544-63-8 348 myristic acid Monomer or other reactant Polymer production aid Other (processing aid) All         31 December 2028 0290   552-30-7 349 trimellitic anhydride Monomer or other reactant All     (20)   31 December 2034 0291   557-59-5 350 lignoceric acid Monomer or other reactant All         31 December 2028 0292   563-45-1 351 3-methyl-1-butene Monomer or other reactant Plastics 0,1     Only to be used in polypropylene. Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. 31 December 2028 0293   576-26-1 352 2,6-dimethylphenol Monomer or other reactant All 2,5       31 December 2034 0294   584-09-8 353 carbonic acid, rubidium salt Additive or polymer production aid All 600       31 December 2028 0295   584-84-9 354 2,4-toluene diisocyanate Monomer or other reactant All     (16) Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2034 0296   585-07-9 355 methacrylic acid, tert -butyl ester Monomer or other reactant All     (22)   31 December 2034 0297   592-41-6 356 1-hexene Monomer or other reactant All 150       31 December 2034 0298   599-64-4 358 4-cumylphenol Monomer or other reactant All 2,5       31 December 2034 0299   611-99-4 359 4,4′-dihydroxybenzophenone Aid to polymerisation All     (8)   31 December 2034 0300   620-67-7 360 glycerol triheptanoate Additive or polymer production aid All         31 December 2034 0301   629-11-8 361 1,6-hexanediol Monomer or other reactant All 2,5       31 December 2034 0302   630-08-0 362 carbon monoxide Monomer or other reactant All         31 December 2028 0303   646-06-0 363 1,3-dioxolane Monomer or other reactant All 250       31 December 2034 0304   689-12-3 365 acrylic acid, isopropyl ester Monomer or other reactant All     (21)   31 December 2028 0305   691-37-2 366 4-methyl-1-pentene Monomer or other reactant All 2,5       31 December 2034 0306   693-23-2 367 n -dodecanedioic acid Monomer or other reactant Other (processing aid) All         31 December 2034 0307   693-36-7 368 thiodipropionic acid, dioctadecyl ester Additive or polymer production aid All     (14)   31 December 2034 0308   693-57-2 369 12-aminododecanoic acid Monomer or other reactant All 2,5       31 December 2034 0309   760-93-0 370 methacrylic anhydride Monomer or other reactant All     (22)   31 December 2034 0310   818-61-1 371 acrylic acid, monoester with ethyleneglycol Monomer or other reactant All     (21)   31 December 2034 0311   822-06-0 372 hexamethylene diisocyanate Monomer or other reactant All     (16) Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2034 0312   840-65-3 373 2,6-naphthalenedicarboxylic acid, dimethyl ester Monomer or other reactant All 2,5       31 December 2034 0313   868-77-9 374 methacrylic acid, monoester with ethyleneglycol Monomer or other reactant All     (22)   31 December 2034 0314   872-05-9 375 1-decene Monomer or other reactant All 2,5       31 December 2034 0315   872-50-4 376 N -methylpyrrolidone Additive or polymer production aid All 3000       31 December 2028 0316   919-30-2 377 3-aminopropyltriethoxysilane Additive Polymer production aid All 2,5     Residual extractable content of 3-aminopropyltriethoxysilane to be less than 3 mg/kg filler when used for the reactive surface treatment of inorganic fillers. MTC tap = 2,5 μg/l when used for the surface treatment of materials and products. 31 December 2034 0317   923-02-4 378 N -methylolmethacrylamide Monomer or other reactant All 2,5       31 December 2034 0318   924-42-5 379 N -methylolacrylamide Monomer or other reactant All 0,1       31 December 2028 0319   925-60-0 380 acrylic acid, propyl ester Monomer or other reactant All     (21)   31 December 2028 0320   931-88-4 381 cyclooctene Monomer or other reactant All 2,5       31 December 2028 0321   947-04-6 382 laurolactam Monomer or other reactant All 250       31 December 2034 0322   948-65-2 383 2-phenylindole Additive or polymer production aid All 750       31 December 2028 0323   991-84-4 384 2,4-bis(octylmercapto)-6-(4- hydroxy–3,5-di- tert -butylanilino)-1,3,5-triazine Additive All 1500 For the MTC tap values of degradation products, refer to Table 4.     31 December 2034 0324   999-61-1 385 acrylic acid, 2-hydroxypropyl ester Monomer or other reactant All 2,5 - expressed as the sum of acrylic acid, 2-hydroxypropyl ester and acrylic acid, 2-hydroxyisopropyl ester     It may contain up to 25 % (w/w) of acrylic acid, 2-hydroxyisopropyl ester (CAS No. 2918-23-2). Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. 31 December 2028 0325   1034-01-1 386 gallic acid, octyl ester Additive All     (19)   31 December 2028 0326   1072-63-5 387 1-vinylimidazole Monomer or other reactant All 2,5       31 December 2028 0327   1120-36-1 388 1-tetradecene Monomer or other reactant All 2,5       31 December 2034 0328   1141-38-4 389 2,6-naphthalenedicarboxylic acid Monomer or other reactant All 250       31 December 2034 0329   1166-52-5 390 gallic acid, dodecyl ester Additive All     (19)   31 December 2028 0330   1187-93-5 391 perfluoromethyl perfluorovinyl ether Monomer or other reactant Plastics, coatings, rubber 0,1   (38) Only to be used in: — coatings; or — rubber; or -fluoro- and perfluoropolymers intended for products with a CF (S/V ratio) of ≤ 0,0067 dm -1 . 31 December 2028 0331   1241-94-7 392 phosphoric acid, diphenyl 2-ethylhexyl ester Additive All 120       31 December 2034 0332   1302-78-9 393 bentonite Additive Polymer production aid All       If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0333   1305-62-0 394 calcium hydroxide Additive Polymer production aid Aid to polymerisation All       If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2034 0334   1305-78-8 395 calcium oxide Additive Aid to polymerisation All       If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2034 0335   1309-42-8 396 magnesium hydroxide Additive All       If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2034 0336   1309-48-4 397 magnesium oxide Additive Aid to polymerisation All       If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0337   1309-64-4 398 antimony trioxide Additive or polymer production aid All     For antimony, refer to Annex V.   31 December 2028 0338   1310-58-3 399 potassium hydroxide Additive or polymer production aid All       If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2034 0339   1310-73-2 400 sodium hydroxide Additive or polymer production aid All       If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2034 0340   1313-82-2 401 sodium sulfide Monomer or other reactant All         31 December 2034 0341   1314-13-2 402 zinc oxide Additive Aid to polymerisation All     For zinc, refer to Annex V. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2034 0342   1314-98-3 403 zinc sulfide Polymer production aid Additive All     For zinc, refer to Annex V.   31 December 2034 0343   1317-33-5 404 molybdenum disulfide Additive or polymer production aid All         31 December 2028 0344   1321-74-0 405 divinylbenzene Monomer or other reactant All 0,1 - expressed as the sum of divinylbenzene and ethylvinylbenzene     It may contain up to 45 % (w/w) of ethylvinylbenzene. Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. 31 December 2034 0345   1323-39-3 406 1,2-propyleneglycol monostearate Additive or polymer production aid All         31 December 2034 0346   1330-80-9 408 1,2-propyleneglycol monooleate Additive or polymer production aid All         31 December 2037 0347   1332-58-7 410 kaolin Additive All       Particles can be thinner than 100 nm only if incorporated at a quantity of less than 12 % w/w in an ethylene vinyl alcohol copolymer (EVOH) inner layer of a multi-layer structure, in which the layer in direct contact with the drinking water provides a functional barrier preventing migration of particles into the water. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0348   1333-86-4 411 carbon black Additive All   Polycyclic aromatic hydrocarbons MTC tap = 0,1 μg/l   Primary particles of 10 – 300 nm which are aggregated to a size of 100 – 1 200 nm which may form agglomerates within the size distribution of 300 nm – mm. Toluene extractables: maximum 0,1 %, determined according to ISO method 6209. UV absorption of cyclohexane extract at 386 nm: < 0,02 AU for a 1 cm cell or < 0,1 AU for a 5 cm cell, determined according to a generally recognised method of analysis. Benzo(a)pyrene content: max 0,25 mg/kg carbon black. Maximum use level of carbon black in plastics: 2,5 % w/w. 31 December 2034 0349   1335-23-5 412 copper iodide Additive or polymer production aid All     (6) For copper, refer to Annex V.   31 December 2028 0350   1336-21-6 413 ammonium hydroxide Additive Polymer production aid All     For ammonium, refer to Annex V.   31 December 2034 0351   1338-39-2 414 sorbitan monolaurate Additive or polymer production aid All         31 December 2034 0352   1338-41-6 415 sorbitan monostearate Additive or polymer production aid All         31 December 2034 0353   1338-43-8 416 sorbitan monooleate Additive Polymer production aid All         31 December 2037 0354   1343-98-2 417 silicic acid Monomer or other reactant Additive Polymer production aid All       If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0355   1344-28-1 418 aluminium oxide Additive Polymer production aid All     For aluminium, refer to Annex V. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2034 0356   1401-55-4 419 tannic acids Additive or polymer production aid All       According to the JECFA specifications. 31 December 2034 0357   1459-93-4 420 isophthalic acid, dimethyl ester Monomer or other reactant All 2,5       31 December 2034 0358   1477-55-0 421 1,3-benzenedimethanamine Monomer or other reactant All     (33)   31 December 2034 0359   1533-45-5 422 4,4′-bis(2-benzoxazolyl)stilbene Additive or polymer production aid All 2,5       31 December 2034 0360   1623-05-8 423 perfluoropropylperfluorovinyl ether Monomer or other reactant All 2,5   (38)   31 December 2028 0361   1647-16-1 424 1,9-decadiene Monomer or other reactant All 2,5       31 December 2028 0362   1663-39-4 425 acrylic acid, tert -butyl ester Monomer or other reactant All     (21)   31 December 2034 0363   1675-54-3 426 2,2-bis(4-hydroxyphenyl)propane bis(2,3-epoxypropyl) ether Monomer or other reactant (resin) All 450 - expressed as BADGE and its hydrolysis products BADGE chlorohydrins MTC tap = 50 μg/l bisphenol-A MTC tap = 2,5 μg/l epichlorohydrin MTC tap = 0,1 μg/l (49) In compliance with Commission Regulation (EC) No 1895/2005 ( OJ L 302, 19.11.2005, p. 28 .). 31 December 2034 0364   1679-51-2 427 4-(hydroxymethyl)-1-cyclohexene Monomer or other reactant All 2,5       31 December 2028 0365   1709-70-2 428 1,3,5-trimethyl-2,4,6-tris(3,5-di- tert -butyl-4-hydroxybenzyl)benzene Additive All   For the MTC tap values of degradation products, refer to Table 4.     31 December 2034 0366   1761-71-3 429 bis(4-aminocyclohexyl)methane Monomer or other reactant All 2,5       31 December 2034 0367   1843-03-4 430 1,1,3-tris(2-methyl-4-hydroxy-5- tert -butylphenyl) butane Additive or polymer production aid All 250       31 December 2034 0368   1843-05-6 431 2-hydroxy-4-n-octyloxybenzophenone Additive Polymer production aid All     (8)   31 December 2034 0369   2035-75-8 432 adipic anhydride Monomer or other reactant All         31 December 2028 0370   2082-79-3 433 octadecyl 3-(3,5-di- tert -butyl-4-hydroxyphenyl)propionate Additive Polymer production aid All 300 For the MTC tap values of degradation products, refer to Table 4.     31 December 2034 0371   2082-81-7 434 methacrylic acid, diester with 1,4-butanediol Monomer or other reactant All 2,5       31 December 2034 0372   2123-24-2 435 caprolactam, sodium salt Monomer or other reactant All     (4)   31 December 2034 0373   2146-71-6 436 lauric acid, vinyl ester Monomer or other reactant All         31 December 2034 0374   2156-97-0 437 acrylic acid, dodecyl ester   All 2,5       31 December 2034 0375   2162-74-5 438 bis(2,6-diisopropylphenyl) carbodiimide Monomer or other reactant All 2,5 - expressed as the sum of bis(2,6-diisopropylphenyl)carbodiimide and its hydrolysis product 2,6-diisopropylaniline       31 December 2037 0376   2177-70-0 439 methacrylic acid, phenyl ester Monomer or other reactant All     (22)   31 December 2034 0377   2210-28-8 440 methacrylic acid, propyl ester Monomer or other reactant All     (22)   31 December 2028 0378   2315-68-6 441 benzoic acid, propyl ester Additive or polymer production aid All         31 December 2028 0379   2425-79-8 442 1,4-butanediol bis(2,3-epoxypropyl)ether Monomer or other reactant All 0,1     Maximum residual content in the final material (QM) = 1 mg/kg in the product expressed as epoxy group. Molecular weight of epoxy group is 43 Da. Verification of compliance by residual content per water contact surface area (QMA) in case of reaction with water. 31 December 2034 0380   2432-99-7 443 11-aminoundecanoic acid Monomer or other reactant All 250       31 December 2034 0381   2440-22-4 444 2-(2′-hydroxy-5′-methylphenyl)benzotriazole Additive or polymer production aid All     (12)   31 December 2034 0382   2466-09-3 445 pyrophosphoric acid Monomer or other reactant Polymer production aid All         31 December 2028 0383   2495-35-4 446 acrylic acid, benzyl ester Monomer or other reactant All     (21)   31 December 2034 0384   2495-37-6 447 methacrylic acid, benzyl ester Monomer or other reactant All     (22)   31 December 2034 0385   2499-59-4 448 acrylic acid, n -octyl ester Monomer or other reactant All     (21)   31 December 2028 0386   2500-88-1 449 dioctadecyl disulfide Additive or polymer production aid All 2,5       31 December 2034 0387   2561-88-8 450 sebacic anhydride Monomer or other reactant Other (processing aid) All         31 December 2028 0388   2682-20-4 451 2-methyl-4-isothiazolin-3-one Additive Polymer production aid All 25     Only to be used in aqueous polymer dispersions and emulsions. 31 December 2034 0389   2725-22-6 452 2,4-bis(2,4-dimethylphenyl)-6-(2- hydroxy-4-n-octyloxyphenyl)-1,3,5-triazine Additive or polymer production aid All 250       31 December 2034 0390   2768-02-7 453 vinyltrimethoxysilane Additive Other (processing aid) All 2,5     Verification of compliance by residual content per water contact surface area (QMA). 31 December 2034 0391   2855-13-2 454 1-amino-3-aminomethyl-3,5,5- trimethylcyclohexane Monomer or other reactant All 300       31 December 2034 0392   2867-47-2 455 methacrylic acid, 2-(dimethylamino)-ethyl ester Monomer or other reactant All 0,1       31 December 2034 0393   2998-08-5 456 acrylic acid, sec -butyl ester Monomer or other reactant All     (21)   31 December 2028 0394   2998-18-7 457 methacrylic acid, sec -butyl ester Monomer or other reactant All     (22)   31 December 2028 0395   3061-75-4 458 behenamide Additive or polymer production aid All         31 December 2034 0396   3135-18-0 459 3,5-di- tert -butyl-4-hydroxybenzyl-phosphonic acid, dioctadecyl ester Additive or polymer production aid All   For the MTC tap values of degradation products, refer to Table 4.     31 December 2028 0397   3173-53-3 460 cyclohexyl isocyanate Monomer or other reactant All     (16) Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2034 0398   3173-72-6 461 1,5-naphthalene diisocyanate Monomer or other reactant All     (16) Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2034 0399   3195-78-6 462 N -vinyl- N -methylacetamide Monomer or other reactant All 1,0       31 December 2034 0400   3290-92-4 463 1,1,1-trimethylolpropane trimethacrylate Aid to polymerisation All 2,5       31 December 2034 0401   3293-97-8 464 2-hydroxy-4- n -hexyloxybenzophenone Additive or polymer production aid All     (8)   31 December 2028 0402   3333-62-8 465 7-[2 H -naphtho-(1,2-D)triazol-2-yl]-3-phenylcoumarin Additive All       Requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0403   3648-18-8 466 di- n -octyltin dilaurate Additive Polymer production aid All     (10)   31 December 2028 0404   3825-26-1 468 perfluorooctanoic acid, ammonium salt Additive or polymer production aid All     (38) (39) Only to be used in repeated use articles, sintered at high temperatures. 31 December 2028 0405   3864-99-1 469 2-(2′-hydroxy–3,5′-di- tert -butylphenyl)-5-chlorobenzotriazole Additive Polymer production aid All   For the MTC tap values of degradation products, refer to Table 4. (12)   31 December 2028 0406   3896-11-5 470 2-(2′-hydroxy-3′- tert -butyl-5′-methylphenyl)-5-chlorobenzotriazole Additive or polymer production aid All     (12)   31 December 2034 0407   3965-55-7 471 5-sulfoisophthalic acid, monosodium salt, dimethyl ester Monomer or other reactant All 2,5       31 December 2034 0408   4066-02-8 472 2,2′-methylenebis(4-methyl-6-cyclohexylphenol) Additive All     (5)   31 December 2034 0409   4074-90-2 473 adipic acid, divinyl ester Monomer or other reactant All 0,1     Maximum residual content in the final material (QM) = 5 mg/kg in the product. Only to be used as co-monomer. Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. 31 December 2028 0410   4098-71-9 475 1-isocyanato-3-isocyanatomethyl- 3,5,5-trimethylcyclohexane Monomer or other reactant All     (16) Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2034 0411   4128-73-8 476 diphenylether–4,4′-diisocyanate Monomer or other reactant All     (16) Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2028 0412   4130-42-1 477 2,6-di- tert -butyl-4-ethylphenol Polymer production aid Other (processing aid) All 240 For the MTC tap values of degradation products, refer to Table 4.   Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. 31 December 2028 0413   4191-73-5 478 4-hydroxybenzoic acid, isopropyl ester Additive or polymer production aid All         31 December 2034 0414   4196-95-6 479 azelaic anhydride Monomer or other reactant All         31 December 2028 0415   4221-80-1 480 3,5-di- tert -butyl-4-hydroxybenzoic acid, 2,4-di- tert -butylphenyl ester Additive or polymer production aid All   For the MTC tap values of degradation products, refer to Table 4.     31 December 2034 0416   4422-95-1 481 1,3,5-benzenetricarboxylic acid trichloride Monomer or other reactant All 2,5 - expressed as 1,3,5-benzenetricarboxylic acid       31 December 2037 0417   4655-34-9 482 methacrylic acid, isopropyl ester Monomer or other reactant All     (22)   31 December 2028 0418   4724-48-5 483 n -octylphosphonic acid Additive or polymer production aid All 2,5       31 December 2034 0419   4767-03-7 484 2,2-bis(hydroxymethyl)propionic acid Monomer or other reactant All 2,5     Verification of compliance by residual content per drinking water contact surface area (QMA) pending the availability of an analytical method. When used for coatings, only as monomer for polymeric additives. 31 December 2034 0420   5124-30-1 485 dicyclohexylmethane–4,4′-diisocyanate Monomer or other reactant All     (16) Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2034 0421   5136-44-7 486 ethylene- N -palmitamide- N ′-stearamide Additive or polymer production aid All         31 December 2028 0422   5232-99-5 487 2-cyano–3,3-diphenylacrylic acid, ethyl ester Additive Polymer production aid All 2,5       31 December 2034 0423   5518-18-3 488 N , N ′-ethylenebispalmitamide Additive or polymer production aid All         31 December 2028 0424   5873-54-1 490 diphenylmethane–2,4′-diisocyanate Monomer or other reactant All     (16) Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2034 0425   6182-11-2 491 1,2-propyleneglycol distearate Additive or polymer production aid All         31 December 2028 0426   6197-30-4 492 2-cyano–3,3-diphenylacrylic acid, 2-ethylhexyl ester Additive or polymer production aid All 2,5       31 December 2034 0427   6200-40-4 493 bis(2-hydroxyethyl)-2-hydroxypropyl-3-(dodecyloxy)methylammonium chloride Additive or polymer production aid All 90       31 December 2028 0428   6303-21-5 494 hypophosphorous acid Additive Polymer production aid All         31 December 2034 0429   6642-31-5 495 6-amino–1,3-dimethyluracil Additive or polymer production aid All 250       31 December 2034 0430   6683-19-8 496 pentaerythritol tetrakis[3-(3,5-di- tert -butyl-4-hydroxyphenyl)-propionate] Additive Polymer production aid All   For the MTC tap values of degradation products, refer to Table 4.     31 December 2034 0431   6846-50-0 497 2,2,4-trimethyl–1,3-pentanediol diisobutyrate Additive Polymer production aid Coatings 250     Only to be used in coatings. 31 December 2034 0432   6864-37-5 498 3,3′-dimethyl–4,4′-diaminodicyclohexylmethane Monomer or other reactant Plastics 2,5     Only to be used in polyamides. 31 December 2034 0433   6915-15-7 499 malic acid Monomer or other reactant Other (processing aid) All       In case of use as a monomer only to be used as a co-monomer in aliphatic polyesters up to maximum level of 1 % on a molar basis, except when used for coatings. 31 December 2034 0434   7128-64-5 500 2,5-bis(5- tert -butyl-2-benzoxazolyl)thiophene Additive Polymer production aid All 30     Requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex 1 of Commission Implementing Decision (EU) 2024/368. 31 December 2034 0435   7456-68-0 502 4,4′-oxybis(benzenesulfonyl azide) Monomer or other reactant All 2,5       31 December 2034 0436   7585-39-9 503 β-dextrin Additive or polymer production aid All         31 December 2034 0437   7631-90-5 505 sodium bisulfite Additive or polymer production aid All     (18)   31 December 2034 0438   7632-00-0 506 sodium nitrite Additive or polymer production aid All 30       31 December 2034 0439   7647-01-0 507 hydrochloric acid Additive or polymer production aid Other (processing aid) All         31 December 2034 0440   7647-15-6 508 sodium bromide Additive or polymer production aid All         31 December 2034 0441   7664-38-2 509 phosphoric acid Monomer or other reactant Polymer production aid All       If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2034 0442   7664-41-7 510 ammonia Monomer or other reactant Other (processing aid) All     For ammonium, refer to Annex V.   31 December 2037 0443   7681-11-0 512 potassium iodide Additive or polymer production aid All     (6)   31 December 2034 0444   7681-82-5 513 sodium iodide Additive or polymer production aid All     (6)   31 December 2034 0445   7757-83-7 516 sodium sulfite Additive or polymer production aid All     (18) If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2034 0446   7758-02-3 517 potassium bromide Additive or polymer production aid All         31 December 2034 0447   7782-42-5 521 graphite Additive All   Polycyclic aromatic hydrocarbons MTC tap = 0,1 μg/l   Graphites according to EUPL Number 2039, Annex IV. 31 December 2034 0448   7782-50-5 522 chlorine Monomer or other reactant All         31 December 2034 0449   7787-70-4 523 copper bromide Additive or polymer production aid All     (6) For copper, refer to Annex V.   31 December 2034 0450   8001-22-7 524 soybean oil Monomer or other reactant Other (processing aid) All         31 December 2028 0451   8001-39-6 525 Japan wax Additive or polymer production aid All         31 December 2028 0452   8001-75-0 526 ceresin Additive or polymer production aid All         31 December 2028 0453   8001-79-4 527 castor oil Monomer or other reactant (base oil) All         31 December 2028 0454   8002-43-5 528 lecithin Additive Polymer production aid Other (processing aid) All         31 December 2037 0455   8002-53-7 529 montan wax Additive Polymer production aid All         31 December 2034 0456   8006-44-8 530 candelilla wax Additive or polymer production aid All         31 December 2028 0457   8012-89-3 531 beeswax Additive or polymer production aid All         31 December 2037 0458   8013-07-8 532 soybean oil, epoxidised Monomer or other reactant Other (processing aid) All 1500   (31) Oxirane < 8 %, iodine number < 6. 31 December 2034 0459   8015-86-9 533 carnauba wax Additive Polymer production aid Other (processing aid) All         31 December 2028 0460   8017-16-1 534 polyphosphoric acids Monomer or other reactant Additive Polymer production aid All       If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2034 0461   8050-09-7 535 rosin Monomer or other reactant Additive Polymer production aid Other (processing aid) All         31 December 2034 0462   8050-15-5 536 rosin, hydrogenated, ester with methanol Additive All, except rubber         31 December 2034 0463   8050-26-8 537 rosin, ester with pentaerythritol Additive or polymer production aid All         31 December 2034 0464   8050-31-5 538 rosin, ester with glycerol Other (processing aid) All         31 December 2034 0465   8052-10-6 539 rosin tall oil Monomer or other reactant Other (processing aid) All         31 December 2028 0466   8062-15-5 540 lignosulfonic acid Additive or polymer production aid Plastics 12     Only to be used as dispersant for plastics dispersions. 31 December 2028 0467   9000-01-5 541 gum arabic Additive or polymer production aid All         31 December 2028 0468   9000-11-7 542 carboxymethylcellulose Additive or polymer production aid All         31 December 2028 0469   9000-16-2 543 dammar Additive or polymer production aid All         31 December 2028 0470   9000-30-0 544 guar gum Additive or polymer production aid All         31 December 2037 0471   9000-65-1 545 tragacanth gum Additive or polymer production aid All         31 December 2037 0472   9000-69-5 546 pectin Additive or polymer production aid All         31 December 2037 0473   9000-70-8 547 gelatin Additive or polymer production aid All         31 December 2028 0474   9000-71-9 548 casein Additive or polymer production aid All         31 December 2028 0475   9002-88-4 549 polyethylene wax Monomer or other reactant (base oil) Additive Polymer production aid Other (processing aid) All         31 December 2034 0476   9003-07-0 550 polypropylene wax Polymer production aid Other (processing aid) All         31 December 2034 0477   9003-39-8 552 polyvinylpyrrolidone Monomer or other reactant All       The substance shall meet the purity criteria as laid down in Commission Directive 2008/84/EC. 31 December 2037 0478   9004-34-6 553 cellulose Monomer or other reactant Additive All         31 December 2037 0479   9004-36-8 554 cellulose acetate butyrate Additive or polymer production aid All         31 December 2028 0480   9004-57-3 555 ethylcellulose Monomer or other reactant Additive All         31 December 2028 0481   9004-58-4 556 ethylhydroxyethylcellulose Additive or polymer production aid All         31 December 2028 0482   9004-59-5 557 methylethylcellulose Additive or polymer production aid All         31 December 2028 0483   9004-62-0 558 hydroxyethylcellulose Additive Polymer production aid All         31 December 2028 0484   9004-64-2 559 hydroxypropylcellulose Additive or polymer production aid All         31 December 2028 0485   9004-65-3 560 methylhydroxypropylcellulose Additive or polymer production aid All         31 December 2028 0486   9004-67-5 561 methylcellulose Polymer production aid Additive All         31 December 2028 0487   9004-70-0 562 nitrocellulose Monomer or other reactant All         31 December 2028 0488   9004-97-1 563 polyethyleneglycol monoricinoleate Additive or polymer production aid All 2100       31 December 2028 0489   9005-25-8 564 starch, edible Monomer or other reactant All         31 December 2028 0490   9005-27-0 565 hydroxyethyl starch Additive or polymer production aid All         31 December 2028 0491   9005-32-7 566 alginic acid Additive or polymer production aid All         31 December 2037 0492   9005-37-2 567 1,2-propyleneglycol alginate Additive or polymer production aid All         31 December 2028 0493   9005-64-5 568 polyethyleneglycol sorbitan monolaurate Other (processing aid) All         31 December 2034 0494   9005-65-6 569 polyethyleneglycol sorbitan monooleate Other (processing aid) All         31 December 2034 0495   9005-66-7 570 polyethyleneglycol sorbitan monopalmitate Additive or polymer production aid All         31 December 2034 0496   9005-67-8 571 polyethyleneglycol sorbitan monostearate Other (processing aid) All         31 December 2034 0497   9005-70-3 572 polyethyleneglycol sorbitan trioleate Additive or polymer production aid All         31 December 2037 0498   9005-71-4 573 polyethyleneglycol sorbitan tristearate Additive or polymer production aid All         31 December 2037 0499   9006-04-6 574 rubber, natural Monomer or other reactant Additive All       At recovery and coagulation of the natural rubber, ammonia, formic acid, acetic acid and sodium bisulfite may be used. Other additives of the natural rubber must be listed in the positive list. 31 December 2028 0500   9032-42-2 576 hydroxyethylmethylcellulose Additive or polymer production aid All         31 December 2028 0501   9044-17-1 577 isobutylene-butene copolymer Additive or polymer production aid All         31 December 2037 0502   9046-01-9 578 polyethyleneglycol tridecyl ether phosphate Additive or polymer production aid All 250     Polyethyleneglycol (EO < 11) tridecyl ether phosphate (mono-and dialkyl ester) with a maximum 10 % content of polyethyleneglycol (EO < 11) tridecylether. 31 December 2028 0503   9049-76-7 579 hydroxypropyl starch Additive or polymer production aid All         31 December 2028 0504   10016-20-3 580 α-dextrin Additive or polymer production aid All         31 December 2037 0505   10022-31-8 581 barium nitrate Additive or polymer production aid All     For barium, refer to Annex V. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2034 0506   10039-33-5 582 di- n -octyltin bis(2-ethylhexyl maleate) Additive or polymer production aid All     (10)   31 December 2034 0507   10043-11-5 583 boron nitride Additive All     For boron, refer to Annex V. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2037 0508   10043-35-3 584 boric acid Monomer or other reactant Additive All     For boron, refer to Annex V.   31 December 2028 0509   10094-45-8 587 octadecylerucamide Additive or polymer production aid All 250       31 December 2034 0510   10436-08-5 589 cis-11-eicosenamide Additive or polymer production aid All         31 December 2028 0511   10595-80-9 590 methacrylic acid, 2-sulfoethyl ester Monomer or other reactant All 0,1     Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. 31 December 2034 0512   10605-09-1 591 ascorbyl stearate Additive or polymer production aid All         31 December 2028 0513   11097-59-9 592 aluminium magnesium carbonate hydroxide Additive All     For aluminium, refer to Annex V. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2034 0514   11132-73-3 595 lignocellulose Monomer or other reactant All         31 December 2028 0515   11138-66-2 596 xanthan gum Additive Polymer production aid All         31 December 2037 0516   12001-26-2 597 mica Additive All       If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0517   12007-55-5 599 barium tetraborate Additive or polymer production aid All     For barium and boron, refer to Annex V.   31 December 2028 0518   12072-90-1 600 hydromagnesite Additive or polymer production aid All       If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0519   12124-97-9 601 ammonium bromide Additive or polymer production aid All     For ammonium, refer to Annex V.   31 December 2028 0520   12198-93-5 602 ozokerite Additive or polymer production aid All         31 December 2028 0521   12269-78-2 603 pyrophyllite Additive or polymer production aid All       If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0522   12304-65-3 604 hydrotalcite Additive or polymer production aid All       If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0523   12542-30-2 605 acrylic acid, dicyclopentenyl ester Monomer or other reactant All 2,5     Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. 31 December 2034 0524   13003-12-8 608 4,4′-butylidene-bis(6- tert -butyl-3- methylphenyl-ditridecyl phosphite) Additive or polymer production aid All 300       31 December 2034 0525   13445-56-2 609 pyrophosphorous acid Additive or polymer production aid All         31 December 2028 0526   13560-49-1 611 3-aminocrotonic acid, diester with thiobis (2-hydroxyethyl) ether Additive or polymer production aid All         31 December 2028 0527   13811-50-2 612 N , N ′-divinyl-2-imidazolidinone Monomer or other reactant All 2,5     Verification of compliance by residual content per water contact surface area (QMA) in case of reaction with water. 31 December 2034 0528   13983-17-0 613 wollastonite Additive or polymer production aid All       If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0529   14464-46-1 614 cristobalite Additive or polymer production aid All       If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0530   14807-96-6 615 talc Additive Polymer production aid All       If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2037 0531   14808-60-7 616 quartz Additive Polymer production aid All       If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2034 0532   15214-89-8 617 2-acrylamido-2-methylpropanesul phonic acid Monomer or other reactant All 2,5       31 December 2034 0533   15535-79-2 618 di- n -octyltin mercaptoacetate Aid to polymerisation All     (10)   31 December 2034 0534   15571-58-1 619 di- n -octyltin bis(2-ethylhexyl mercaptoacetate) Aid to polymerisation All     (10)   31 December 2028 0535   15571-60-5 620 di- n -octyltin dimaleate Additive or polymer production aid All     (10)   31 December 2028 0536   16219-75-3 621 5-ethylidenebicyclo[2,2,1]hept-2-ene Monomer or other reactant All 2,5     Verification of compliance by residual content per water contact surface area (QMA) pending the availability of analytical method for migration testing. It can only be used for products with a CF (S/V ratio) of ≤ 2dm -1 . 31 December 2034 0537   16260-09-6 622 oleylpalmitamide Additive or polymer production aid All 250       31 December 2034 0538   16389-88-1 623 dolomite Additive or polymer production aid All       If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0539   16712-64-4 624 6-hydroxy-2-naphthalenecarboxylic acid Monomer or other reactant All 2,5       31 December 2034 0540   18641-57-1 626 glycerol tribehenate Additive or polymer production aid All         31 December 2028 0541   19569-21-2 627 huntite Additive or polymer production aid All         31 December 2028 0542   20427-58-1 628 zinc hydroxide Additive or polymer production aid All     For zinc, refer to Annex V. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2034 0543   21645-51-2 629 aluminium hydroxide Additive All     For aluminium, refer to Annex V. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2034 0544   22788-19-8 630 1,2-propyleneglycol dilaurate Additive or polymer production aid All         31 December 2028 0545   23128-74-7 631 1,6-hexamethylene-bis(3-(3,5-di- tert -butyl-4-hydroxyphenyl)propionamide) Additive Polymer production aid All 2250 For the MTC tap values of degradation products, refer to Table 4.     31 December 2034 0546   23676-09-7 632 4-ethoxybenzoic acid, ethyl ester Additive or polymer production aid All 180       31 December 2028 0547   23949-66-8 633 2-ethoxy-2′-ethyloxanilide Additive or polymer production aid All 1500       31 December 2034 0548   24800-44-0 634 tripropyleneglycol Monomer or other reactant All         31 December 2034 0549   25134-51-4 636 acrylic acid, acrylic acid, 2-ethylhexyl ester, copolymer Additive or polymer production aid All 2,5 - expressed as acrylic acid, 2-ethylhexyl ester   (21)   31 December 2037 0550   25151-96-6 637 pentaerythritol dioleate Additive or polymer production aid All 2,5       31 December 2034 0551   25322-69-4 639 polypropyleneglycol Monomer or other reactant Aid to polymerisation All         31 December 2034 0552   25359-91-5 640 formaldehyde-1-naphthol, copolymer Additive or polymer production aid All 2,5       31 December 2034 0553   25736-61-2 642 maleic anhydride-styrene, copolymer, sodium salt Additive or polymer production aid All       The fraction with molecular weight below 1 000 Da shall not exceed 0,05 % (w/w). 31 December 2037 0554   26266-57-9 643 sorbitan monopalmitate Additive Polymer production aid All         31 December 2034 0555   26266-58-0 644 sorbitan trioleate Additive or polymer production aid All         31 December 2034 0556   26401-86-5 645 mono- n -octyltin tris(isooctyl mercaptoacetate) Additive or polymer production aid All     (11)   31 December 2034 0557   26401-97-8 646 di- n -octyltin bis(isooctyl mercaptoacetate) Additive or polymer production aid All     (10)   31 December 2034 0558   26402-23-3 647 glycerol monohexanoate Additive or polymer production aid All         31 December 2028 0559   26402-26-6 648 glycerol monooctanoate Additive or polymer production aid All         31 December 2034 0560   26427-07-6 649 dibutylthiostannoic acid polymer Additive or polymer production aid All       Molecular unit = (C 8 H 18 S 3 Sn 2 ) n (n = 1,5-2). 31 December 2034 0561   26636-01-1 650 dimethyltin bis(isooctyl mercaptoacetate) Additive or polymer production aid All     (9)   31 December 2028 0562   26658-19-5 651 sorbitan tristearate Additive or polymer production aid All         31 December 2034 0563   26741-53-7 652 bis(2,4-di- tert -butylphenyl) pentaerythritol diphosphite Additive or polymer production aid All 30 For the MTC tap values of degradation products, refer to Table 4.     31 December 2034 0564   26747-90-0 653 2,4-toluene diisocyanate dimer Monomer or other reactant All     (16) Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2034 0565   26836-47-5 654 sorbitol monostearate Additive or polymer production aid All         31 December 2028 0566   26896-48-0 655 tricyclodecanedimethanol Monomer or other reactant All 2,5       31 December 2034 0567   26914-43-2 656 styrenesulfonic acid Monomer or other reactant All 2,5       31 December 2028 0568   27107-89-7 657 mono- n -octyltin tris(2-ethylhexyl mercaptoacetate) Aid to polymerisation All     (11)   31 December 2034 0569   27176-87-0 658 dodecylbenzenesulfonic acid Monomer or other reactant All 1500       31 December 2034 0570   27194-74-7 659 1,2-propyleneglycol monolaurate Additive or polymer production aid All         31 December 2034 0571   27458-90-8 660 di- tert -dodecyl disulfide Additive or polymer production aid All 2,5       31 December 2034 0572   27676-62-6 661 1,3,5-tris(3,5-di- tert -butyl-4-hydroxybenzyl)-1,3,5-triazine-2,4,6(1 H ,3 H ,5 H )-trione Additive or polymer production aid All 250 For the MTC tap values of degradation products, refer to Table 4.     31 December 2034 0573   27955-94-8 662 1,1,1-tris(4-hydroxyphenol)ethane Monomer or other reactant Plastics 0,25     Only to be used in polycarbonates, except when used for coatings. 31 December 2034 0574   28290-79-1 663 linolenic acid Monomer or other reactant All         31 December 2028 0575   28931-67-1 664 trimethylolpropane trimethacrylate-methyl methacrylate copolymer Additive or polymer production aid All         31 December 2037 0576   29013-28-3 665 1,2-propyleneglycol monopalmitate Additive or polymer production aid All         31 December 2028 0577   29116-98-1 666 sorbitan dioleate Additive or polymer production aid All         31 December 2028 0578   29204-02-2 667 gadoleic acid Monomer or other reactant Other (processing aid) All         31 December 2028 0579   29894-35-7 668 polyglycerol ricinoleate Additive or polymer production aid All         31 December 2037 0580   30233-64-8 669 glycerol monobehenate Additive or polymer production aid All         31 December 2034 0581   30899-62-8 670 glycerol monolaurate diacetate Additive or polymer production aid All     (31)   31 December 2034 0582   31570-04-4 671 phosphorous acid, tris(2,4-di- tert -butylphenyl)ester Additive Polymer production aid All   For the MTC tap values of degradation products, refer to Table 4.     31 December 2034 0583   31831-53-5 672 polyester of 1,4-butanediol with caprolactone Additive or polymer production aid All     (28) (29) The fraction with molecular weight below 1 000 Da shall not exceed 0,5 % (w/w). 31 December 2034 0584   32509-66-3 673 ethylene glycol bis[3,3-bis(3- tert -butyl-4-hydroxyphenyl)butyrate] Additive or polymer production aid All 300       31 December 2034 0585   32647-67-9 674 dibenzylidene sorbitol Additive or polymer production aid All         31 December 2034 0586   32687-78-8 675 N , N ′-bis(3-(3,5-di- tert -butyl-4-hydroxyphenyl)propionyl)hydrazide Additive All 750 For the MTC tap values of degradation products, refer to Table 4.     31 December 2034 0587   33568-99-9 676 di- n -octyltin bis(isooctyl maleate) Additive or polymer production aid All     (10)   31 December 2028 0588   33587-20-1 677 1,2-propyleneglycol dipalmitate Additive or polymer production aid All         31 December 2028 0589   35074-77-2 678 1,6-hexamethylene-bis(3-(3,5-di- tert -butyl-4-hydroxyphenyl)propionate) Additive All 300 For the MTC tap values of degradation products, refer to Table 4.     31 December 2034 0590   35958-30-6 679 1,1-bis(2-hydroxy–3,5-di- tert -butylphenyl)ethane Additive or polymer production aid All 250       31 December 2028 0591   36443-68-2 680 triethyleneglycol bis[3-(3- tert -butyl-4-hydroxy-5-methylphenyl)propionate] Additive or polymer production aid All 450       31 December 2034 0592   36653-82-4 681 1-hexadecanol Monomer or other reactant All         31 December 2034 0593   37205-99-5 682 ethylcarboxymethylcellulose Additive or polymer production aid All         31 December 2028 0594   37206-01-2 683 methylcarboxymethylcellulose Additive or polymer production aid All         31 December 2028 0595   37244-96-5 684 nepheline syenite Additive or polymer production aid All       If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0596   37296-97-2 685 silicic acid, magnesium-sodium-fluoride salt Additive All     For fluoride, refer to Annex V. Only to be used in multi-layer materials for layers not coming into direct contact with drinking water, ecxept when used for coatings. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0597   37353-59-6 686 hydroxymethylcellulose Additive or polymer production aid All         31 December 2028 0598   38103-06-9 687 2,2-bis(4-hydroxyphenyl)propane bis(phthalic anhydride) Monomer or other reactant All 2,5       31 December 2034 0599   38613-77-3 688 tetrakis(2,4-di- tert -butyl-phenyl)-4,4′-biphenylylene diphosphonite Additive Polymer production aid All 900       31 December 2028 0600   40601-76-1 689 1,3,5-tris(4- tert -butyl-3-hydroxy-2,6-dimethylbenzyl)-1,3,5-triazine-2,4,6(1 H ,3 H ,5 H )-trione Additive or polymer production aid All 300       31 December 2034 0601   41484-35-9 690 thiodiethanol bis(3-(3,5-di- tert -butyl-4-hydroxy phenyl)propionate) Additive All 120 For the MTC tap values of degradation products, refer to Table 4.     31 December 2034 0602   47465-97-4 691 3,3-bis(3-methyl-4-hydroxyphenyl)2-indolinone Monomer or other reactant All 90       31 December 2028 0603   52047-59-3 692 2-(4-dodecylphenyl)indole Additive or polymer production aid All 3,0       31 December 2028 0604   54140-20-4 693 sorbitan tripalmitate Additive or polymer production aid All         31 December 2028 0605   54276-35-6 694 methacrylic acid, sulfopropyl ester Monomer or other reactant All 2,5     Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. 31 December 2028 0606   54849-38-6 695 monomethyltin tris(isooctyl mercaptoacetate) Additive or polymer production aid All     (9)   31 December 2028 0607   57569-40-1 696 terephthalic acid, diester with 2,2′-methylenebis(4-methyl-6- tert -butylphenol) Additive or polymer production aid All     (13)   31 December 2028 0608   57583-34-3 697 monomethyltin tris(ethylhexyl mercaptoacetate) Additive or polymer production aid All     (9)   31 December 2028 0609   57583-35-4 698 dimethyltin bis(ethylhexyl mercaptoacetate) Additive or polymer production aid All     (9)   31 December 2028 0610   58446-52-9 699 stearoylbenzoylmethane Additive or polymer production aid All         31 December 2028 0611   61167-58-6 700 acrylic acid, 2- tert -butyl-6-(3- tert -butyl-2-hydroxy-5-methylbenzyl)-4-methylphenyl ester Additive or polymer production aid All 300       31 December 2034 0612   61269-61-2 701 N , N ′-bis(2,2,6,6-tetramethyl-4-piperidyl)hexamethylenediamine-1,2-dibromoethane, copolymer Additive or polymer production aid All 120       31 December 2037 0613   61752-68-9 702 sorbitan tetrastearate Additive or polymer production aid All         31 December 2028 0614   61788-47-4 703 fatty acids, coco Monomer or other reactant Other (processing aid) All         31 December 2028 0615   61788-85-0 704 polyethyleneglycol ester of hydrogenated castor oil Additive Polymer production aid Other (processing aid) All         31 December 2034 0616   61788-89-4 705 acids, fatty, unsaturated (C 18 ), dimers, non hydrogenated, distilled and non-distilled Monomer or other reactant Other (processing aid) All     (17) Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. 31 December 2034 0617   61790-12-3 706 fatty acids, tall oil Monomer or other reactant All         31 December 2028 0618   61790-53-2 707 diatomaceous earth Additive or polymer production aid All       If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0619   61791-12-6 708 polyethyleneglycol ester of castor oil Additive Polymer production aid Other (processing aid) All 2100       31 December 2034 0620   62568-11-0 709 sorbitan monobehenate Additive or polymer production aid All         31 December 2028 0621   63397-60-4 710 bis(2-carbobutoxyethyl)tin-bis(isooctyl mercaptoacetate) Additive or polymer production aid All 900       31 December 2028 0622   63438-80-2 711 (2-carbobutoxyethyl)tin-tris(isooctyl mercaptoacetate) Additive or polymer production aid All 1500       31 December 2028 0623   64147-40-6 712 castor oil, dehydrated Monomer or other reactant (base oil) All         31 December 2034 0624   64365-11-3 7440-44-0 713 charcoal, activated Additive or polymer production aid Plastics       Only for use in PET at maximum 10 mg/kg of polymer. Same purity requirements as for Vegetable Carbon (E 153) set out by Commission Regulation (EU) No 231/2012 with exception of ash content which can be up to 10 % (w/w). 31 December 2028 0625   64365-17-9 714 rosin, hydrogenated, ester with pentaerythritol Additive or polymer production aid All         31 December 2034 0626   65140-91-2 715 3,5-di- tert -butyl-4-hydroxybenzyl phosphonic acid, monoethyl ester, calcium salt Additive or polymer production aid All 300 For the MTC tap values of degradation products, refer to Table 4.     31 December 2034 0627   65447-77-0 716 1-(2-hydroxyethyl)-4-hydroxy-2,2,6,6-tetramethyl piperidine-succinic acid, dimethyl ester, copolymer Additive or polymer production aid All 1 500       31 December 2037 0628   65997-06-0 717 rosin, hydrogenated Additive All, except rubber         31 December 2034 0629   65997-13-9 718 rosin, hydrogenated, ester with glycerol Additive or polymer production aid All         31 December 2034 0630   66822-60-4 719 N -methacryloyloxyethyl- N , N -dimethyl- N -carboxymethyl-ammonium chloride, sodium salt-octadecyl methacrylate-ethyl methacrylate-cyclohexyl methacrylate- N -vinyl-2-pyrrolidone, copolymers Additive or polymer production aid All         31 December 2037 0631   67649-65-4 720 mono- n -dodecyltin tris(isooctyl mercaptoacetate) Additive or polymer production aid All     (24)   31 December 2028 0632   67845-93-6 721 3,5-di- tert -butyl-4-hydroxybenzoic acid, hexadecyl ester Additive or polymer production aid All   For the MTC tap values of degradation products, refer to Table 4.     31 December 2034 0633   68308-53-2 722 fatty acids, soya Monomer or other reactant (base oil) All         31 December 2028 0634   68412-29-3 723 starch, hydrolysed Additive or polymer production aid All         31 December 2028 0635   68425-17-2 724 syrups, hydrolysed starch, hydrogenated Monomer or other reactant All       In compliance with the purity criteria for maltitol syrup E 965(ii) as laid down in Commission Directive 2008/60/EC. 31 December 2034 0636   68442-12-6 726 Reaction products of oleic acid, 2-mercaptoethyl ester, with dichlorodimethyltin, sodium sulfide and trichloromethyltin Additive or polymer production aid All     (9)   31 December 2028 0637   68442-85-3 727 cellulose, regenerated Monomer or other reactant Additive All         31 December 2028 0638   68515-49-1 26761-40-0 729 phthalic acid, diesters with primary, saturated C 9 -C 11 alcohols more than 90 % C 10 (DNIP) Additive Polymer production aid All     (25) (31) Only to be used as: (a) plasticiser; or (b) technical support agent in concentrations up to 0,1 % in the product. Not to be used in combination substances with EUPL Numbers 0103, 0105, 0225 or Diisobutyl phthalate (synonyms 1,2-bis(2-methylpropyl) benzene–1,2-dicarboxylate or ‘DIBP’) with CAS Number 84-69-5. 31 December 2037 0639   68554-70-1 730 methylsilsesquioxane Monomer or other reactant (base oil) Additive Polymer production aid All       Residual monomer in methylsilsesquioxane: < 1 mg methyltrimethoxysilane/kg of methylsilsesquioxane. 31 December 2028 0640   68564-88-5 731 N -heptylaminoundecanoic acid Monomer or other reactant All 2,5       31 December 2034 0641   68610-51-5 732 p -cresol-dicyclopentadiene-isobutylene, copolymer Additive (polymeric) All 250       31 December 2034 0642   68783-41-5 733 acids, fatty, unsaturated (C 18 ), dimers, hydrogenated, distilled and non-distilled Monomer or other reactant Other (processing aid) All     (17) Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. 31 December 2034 0643   68951-50-8 735 bis(polyethyleneglycol)hydroxymethylphosphonate Additive or polymer production aid All 30       31 December 2028 0644   69226-44-4 736 di- n -octyltin ethyleneglycol bis(mercaptoacetate) Additive or polymer production aid All     (10)   31 December 2037 0645   70142-34-6 737 polyethyleneglycol-30 dipolyhydroxystearate Additive or polymer production aid All         31 December 2034 0646   70321-86-7 738 2-[2-hydroxy–3,5-bis(1,1-dimethylbenzyl)phenyl]benzotriazole Additive or polymer production aid All 75       31 December 2034 0647   70331-94-1 739 2,2′-oxamidobis[ethyl-3-(3,5-di- tert -butyl-4-hydroxyphenyl)-propionate] Additive or polymer production aid All   For the MTC tap values of degradation products, refer to Table 4.     31 December 2034 0648   71878-19-8 740 poly[6-[(1,1,3,3-tetramethyl-butyl)amino]-1,3,5-triazine–2,4-diyl]-[(2,2,6,6-tetramethyl-4-piperidyl)-imino]hexamethylene[(2,2,6,6-tetramethyl-4-piperidyl) imino] Additive Polymer production aid All 150       31 December 2028 0649   78301-43-6 742 2,2,4,4-tetramethyl-20-(2,3-epoxy propyl)-7-oxa–3,20-diazadispiro-[5.1.11.2]-heneicosan-21-one, polymer Additive or polymer production aid All 250       31 December 2037 0650   79072-96-1 743 bis(4-ethylbenzylidene)sorbitol Additive or polymer production aid All         31 December 2034 0651   80181-31-3 744 3-hydroxybutanoic acid-3-hydroxypentanoic acid, copolymer Monomer or other reactant All     (34) The substance is used as product obtained by bacterial fermentation. In compliance with the specifications mentioned in the Table 4 of Annex I of Commission Regulation (EU) No 10/2011. 31 December 2028 0652   80410-33-9 745 2,2′,2′-nitrilo(triethyl tris(3,3′,5,5′-tetra- tert -butyl-1,1′-bi-phenyl-2,2′-diyl)phosphite) Additive or polymer production aid All 250 - expressed as sum of phosphite and phosphate For the MTC tap values of degradation products, refer to Table 4.     31 December 2034 0653   80693-00-1 746 bis(2,6-di- tert -butyl-4-methylphenyl)pentaerythritol diphosphite Additive or polymer production aid All 250 - expressed as sum of phosphite and phosphate For the MTC tap values of degradation products, refer to Table 4.     31 December 2034 0654   84030-61-5 747 di- n -dodecyltin bis(isooctyl mercaptoacetate) Additive or polymer production aid All     (24)   31 December 2028 0655   84434-12-8 748 N -(2-aminoethyl)-β-alanine, sodium salt Monomer or other reactant All 2,5       31 December 2028 0656   85209-91-2 749 2,2′-methylene bis(4,6-di- tert -butylphenyl) sodium phosphate Additive or polymer production aid All 250 For the MTC tap values of degradation products, refer to Table 4.     31 December 2034 0657   85209-93-4 750 2,2′-methylenebis(4,6-di- tert -butylphenyl) lithium phosphate Additive or polymer production aid All 250   For lithium, refer to Annex V.   31 December 2028 0658   87189-25-1 751 poly(zinc glycerolate) Additive or polymer production aid All     For zinc, refer to Annex V.   31 December 2034 0659   87826-41-3 69158-41-4 54686-97-4 81541-12-0 752 bis(methylbenzylidene)sorbitol Additive or polymer production aid All         31 December 2037 0660   92704-41-1 753 kaolin, calcined Additive All       If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2034 0661   99880-64-5 754 glycerol dibehenate Additive or polymer production aid All         31 December 2028 0662   106246-33-7 755 4,4′-methylenebis(3-chloro–2,6-diethylaniline) Monomer or other reactant All 2,5     Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. 31 December 2034 0663   110553-27-0 756 2,4-bis(octylthiomethyl)-6-methyllphenol Additive All     (23)   31 December 2034 0664   110638-71-6 757 vermiculite, reaction product with citric acid, lithium salt Additive or polymer production aid All     For lithium, refer to Annex V.   31 December 2034 0665   110675-26-8 758 2,4-bis(dodecylthiomethyl)-6-methylphenol Additive or polymer production aid All     (23)   31 December 2034 0666   118337-09-0 759 2,2′-ethylidenebis(4,6-di- tert -butylphenyl) fluorophosphonite Additive or polymer production aid All 300       31 December 2037 0667   119345-01-6 760 Reaction product of di- tert -butylphosphonite with biphenyl, obtained by condensation of 2,4-di- tert -butylphenol with Friedel Craft reaction product of phosphorous trichloride and biphenyl Additive or polymer production aid All 900 For the MTC tap values of degradation products, refer to Table 4.   Composition: — 4,4′-biphenylene-bis[0,0-bis(2,4-di- tert -butylphenyl)phosphonite] (CAS No. 38613-77-3) (36-46 % w/w (*)), — 4,3′-biphenylene-bis[0,0-bis(2,4-di- tert -butylphenyl)phosphonite] (CAS No. 118421-00-4) (17-23 % w/w (*)), — 3,3′-biphenylene-bis[0,0-bis(2,4-di- tert -butylphenyl)phosphonite] (CAS No. 118421-01-5) (1-5 % w/w (*)), — 4-biphenylene–0,0-bis(2,4-di- tert -butylphenyl)phosphonite (CAS No. 91362-37-7) (1119 % w/w (*)), — Tris(2,4-di- tert -butylphenyl)phosphite (CAS No. 31570-04-4) (9-18 % w/w (*)), — 4,4′-biphenylene–0,0-bis(2,4-di- tert -butylphenyl)phosphonate-0,0-bis(2,4-di-tert-butylphenyl)phosphonite (CAS No. 112949-97-0) (< 5 % w/w (*)) (*) Quantity of substance used/ quantity of formulation. Other specifications: — Phosphor content of min. 5,4 % to max. 5,9 %, — Acid value of max. 10 mg KOH per gram, — Melt range of 85– 110 °C. 31 December 2034 0668   120218-34-0 761 thiodiethanolbis(5-methoxycarbonyl–2,6-dimethyl–1,4-dihydropyridine-3-carboxylate) Additive or polymer production aid All 300       31 December 2037 0669   123968-25-2 762 acrylic acid, 2,4-di- tert -pentyl-6-(1-(3,5-di-tert-pentyl-2-hydroxyphenyl)ethyl)phenyl ester Additive or polymer production aid All 250       31 December 2034 0670   129228-21-3 763 3,3-bis(methoxymethyl)–2,5-dimethylhexane Additive or polymer production aid All 2,5       31 December 2034 0671   132459-54-2 764 N , N ′-bis[4-(ethoxycarbonyl)phenyl]-1,4,5,8-naphthalenetetracarboxydiimide Monomer or other reactant Plastics 2,5     Purity > 98,1 % (w/w). Only to be used as co-monomer (max 4 %) for polyesters (PET, PBT). 31 December 2028 0672   134701-20-5 765 2,4-dimethyl-6-(1-methylpentadecyl)phenol Additive or polymer production aid All 50       31 December 2034 0673   135861-56-2 766 bis(3,4-dimethylbenzylidene)sorbitol Additive or polymer production aid All         31 December 2034 0674   136504-96-6 767 1,2-bis(3-aminopropyl)ethylene diamine, polymer with N-butyl-2,2,6,6-tetramethyl-4-piperidinamine and 2,4,6-trichloro-1,3,5-triazine Additive or polymer production aid All 250       31 December 2034 0675   143925-92-2 768 amines, bis(hydrogenated tallow alkyl) oxidised Additive or polymer production aid Plastics       Only to be used in: (a) polyolefins at 0,1 % (w/w) concentration; or (b) PET at 0,25 % (w/w) concentration. Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. 31 December 2034 0676   145650-60-8 769 phosphorous acid, bis(2,4-di- tert -butyl-6-methylphenyl) ethyl ester Additive or polymer production aid All 250 - expressed as sum of phosphite and phosphate       31 December 2034 0677   147315-50-2 770 2-(4,6-diphenyl-1,3,5-triazin-2-yl)-5-(hexyloxy)phenol Additive or polymer production aid All 2,5       31 December 2034 0678   151841-65-5 771 aluminium hydroxybis [2,2′-methylenebis (4,6-di- tert -butylphenyl) phosphate] Additive or polymer production aid All 250 For the MTC tap values of degradation products, refer to Table 4. For aluminium, refer to Annex V.   31 December 2034 0679   153250-52-3 772 N , N ′-dicyclohexyl-2,6-naphthalene dicarboxamide Additive or polymer production aid All 250       31 December 2028 0680   154862-43-8 773 bis(2,4-dicumylphenyl)pentaerythritol-diphosphite Additive or polymer production aid All 250 - expressed as sum of the substance itself, its oxidised form bis(2,4-dicumylphenyl)pentaerythritol-phosphate and its hydrolysis product (2,4-dicumylphenol)       31 December 2034 0681   161717-32-4 774 2,4,6-tris( tert -butyl)phenyl-2-butyl-2-ethyl-1,3-propanediol phosphite Additive or polymer production aid All 100 - expressed as sum of phosphite, phosphate and the hydrolysis product = TTBP       31 December 2034 0682   166412-78-8 775 1,2-cyclohexanedicarboxylic acid, diisononyl ester Additive Polymer production aid All     (31)   31 December 2034 0683   167883-16-1 776 polydimethylsiloxane, 3-aminopropyl terminated, polymer with dicyclohexylmethane–4,4′- diisocyanate Additive or polymer production aid All       The fraction with molecular weight below 1 000 Da shall not exceed 1,5 % (w/w). 31 December 2034 0684   174254-23-0 777 acrylic acid, methyl ester, telomer with 1-dodecanethiol, C 16 -C 18 alkyl esters Additive or polymer production aid All       0,5 % in the product. Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. 31 December 2028 0685   178671-58-4 778 pentaerythritol tetrakis (2-cyano–3,3-diphenylacrylate) Additive or polymer production aid All 2,5       31 December 2034 0686   182121-12-6 779 9,9-bis(methoxymethyl)fluorene Additive or polymer production aid All 2,5       31 December 2034 0687   192268-64-7 780 poly-[[6-[ N -(2,2,6,6-tetramethyl- 4-piperidinyl)- n -butylamino]-1,3,5-triazine-2,4-diyl][(2,2,6,6-tetramethyl-4-piperidinyl)imino]-1,6-hexanediyl[(2,2,6,6-tetramethyl-4-piperidinyl)imino]]-α-[N,N,N′,N′-tetrabutyl-N"-(2,2,6,6-tetramethyl-4-piperidinyl)-N"-[6-(2,2,6,6-tetramethyl-4-piperidinylamino)-hexyl]-[1,3,5-triazine-2,4,6-triamine]-ω-N,N,N′,N′-tetrabutyl-1,3,5-triazine-2,4-diamine] Additive or polymer production aid All 250       31 December 2037 0688   227099-60-7 781 1,3,5-tris(4-benzoylphenyl) benzene Additive or polymer production aid All 2,5       31 December 2028 0689   661476-41-1 782 polydimethylsiloxane, 3-aminopropyl terminated, polymer with 1-isocyanato-3-isocyanatomethyl-3,5,5-trimethylcyclohexane Additive or polymer production aid All       The fraction with molecular weight below 1 000 Da shall not exceed 1 % (w/w). 31 December 2034 0690   736150-63-3 783 glycerides, castor-oil mono-, hydrogenated, acetates Additive or polymer production aid All     (31)   31 December 2034 0691   745070-61-5 784 1,3,5-tris (2,2-di-methylpropanamido) benzene Additive or polymer production aid All 250       31 December 2037 0692   100-21-0 785 terephthalic acid Monomer or other reactant All     (27)   31 December 2034 0693   117-21-5 786 3-chlorophthalic anhydride Monomer or other reactant All 2,5 - expressed as 3-chloro-phthalic acid       31 December 2034 0694   118-45-6 787 4-chlorophthalic anhydride Monomer or other reactant All 2,5 - expressed as 4-chloro-phthalic acid       31 December 2034 0695   2530-85-0 788 [3-(methacryloxy)propyl]trimethoxysilane Additive Polymer production aid All 2,5     Only to be used as a surface treatment agent of inorganic fillers. Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. Only a method of analysis for the determination of the residual monomer in the treated filler is available. 31 December 2034 0696   106990-43-6 791 N , N ′, N ″, N ″-tetrakis(4,6-bis( N -butyl-( N -methyl-2,2,6,6-tetramethylpiperidin-4-yl)amino)triazin-2-yl)-4,7-diazadecane-1,10-diamine Aid to polymerisation All 2,5       31 December 2034 0697   203255-81-6 792 3,3′,5,5′-tetrakis( tert -butyl)-2,2′-dihydroxybiphenyl, cyclic ester with [3-(3- tert -butyl-4-hydroxy-5-methylphenyl)propyl]oxyphosphonous acid Additive or polymer production aid All 250 - expressed as the sum of phosphite and phosphate form of the substance and the hydrolysis products       31 December 2028 0698   102-71-6 793 triethanolamine Monomer or other reactant Aid to polymerisation Other (processing aid) All     (36)   31 December 2034 0699   79-14-1 794 glycolic acid Monomer or other reactant All       Only to be used for manufacture of polyglycolic acid (PGA) for (i) indirect water contact behind polyesters such as polyethylene terephthalate (PET) or polylactic acid (PLA); and (ii) direct water contact of a blend of PGA up to 3 % w/w in PET or PLA. 31 December 2037 0700   124172-53-8 795 N , N ′-bis(2,2,6,6-tetramethyl-4-piperidyl)- N , N ′-diformylhexamethylenediamine Additive or polymer production aid All 2,5       31 December 2034 0701   18600-59-4 796 2,2′-(1,4-phenylene)bis[4 H -3,1-benzoxazin-4-one] Additive or polymer production aid All 2,5 - including the sum of its hydrolysis products       31 December 2034 0702   73018-26-5 797 polyester of adipic acid with 1,3-butanediol, 1,2-propanediol and 2-ethyl-1-hexanol Additive or polymer production aid All     (30) (31)   31 December 2037 0703   6422-86-2 798 terephthalic acid, bis(2-ethylhexyl)ester Additive or polymer production aid All 3000   (31)   31 December 2034 0704   867-13-0 800 triethyl phosphonoacetate Additive or polymer production aid Plastics       Only for use in PET. 31 December 2034 0705   146340-15-0 802 alcohols, C 12 -C 14 secondary, β-(2-hydroxyethoxy), ethoxylated Additive or polymer production aid All 250       31 December 2028 0706   152261-33-1 803 α-alkenes(C 20 -C 24 ) copolymer with maleic anhydride, reaction product with 4-amino-2,2,6,6-tetramethylpiperidine Additive or polymer production aid All         31 December 2034 0707   1010121-89-7 804 poly(3-nonyl–1,1-dioxo-1-thiopropane–1,3-diyl)-block-poly(x-oleyl-7-hydroxy–1,5-diiminooctane–1,8-diyl), process mixture with x = 1 and/or 5, neutralised with dodecylbenzenesulfonic acid Additive or polymer production aid Plastics       Only to be used as polymer production aid in polyethylene (PE), polypropylene (PP) and polystyrene (PS). 31 December 2034 0708   1076-97-7 806 1,4-cyclohexanedicarboxylic acid Monomer or other reactant Plastics 250     Only to be used for manufacture of polyesters. 31 December 2034 0709     807 titanium nitride, nanoparticles Additive or polymer production aid Plastics       No migration of titanium nitride nanoparticles. Only to be used in polyethylene terephthalate (PET) up to 20 mg/ kg. In the PET, the agglomerates have a diameter of 100-500 nm consisting of primary titanium nitride nanoparticles; primary particles have a diameter of approximately 20 nm. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2037 0710   882073-43-0 808 bis(4-propylbenzylidene)propylsorbitol Additive or polymer production aid All 250 - including the sum of its hydrolysis products       31 December 2028 0711   852282-89-4 809 N -(2,6-diisopropylphenyl)-6-[4-(1,1,3,3-tetramethylbutyl)phenoxy]-1 H -benzo[de]isoquinolin-1,3(2 H )-dione Additive or polymer production aid Plastics 2,5     Only for use in PET. 31 December 2028 0712   68441-17-8 811 polyethylene waxes, oxidised Additive Polymer production aid All 3000       31 December 2034 0713   124578-12-7 812 poly(12-hydroxystearic acid)-polyethyleneimine copolymer Additive or polymer production aid Plastics       Only to be used in plastics up to 0,1 % w/w. Prepared by the reaction of poly(12-hydroxystearic acid) with polyethyleneimine. 31 December 2037 0714     813 sulfosuccinic acid alkyl (C 4 -C 20 ) or cyclohexyl diesters, salts Additive Polymer production aid All 250       31 December 2031 0715     814 sulfosuccinic acid monoalkyl (C 10 -C 16 ) polyethyleneglycol esters, salts Additive or polymer production aid All 100       31 December 2034 0716     816 cis–1,2-cyclohexanedicarboxylic acid, salts Additive or polymer production aid All 250       31 December 2031 0717     817 cis-endo-bicyclo[2.2.1]heptane- 2,3-dicarboxylic acid, salts Additive or polymer production aid All 250     Purity ≥ 96 %. 31 December 2031 0718     818 methallylsulfonic acid, salts Monomer or other reactant All 250       31 December 2031 0719     819 neodecanoic acid, salts Additive or polymer production aid All 2,5 - expressed as neodecanoic acid       31 December 2034 0720     820 pimelic acid, salts Additive or polymer production aid All         31 December 2031 0721     821 stearoyl-2-lactylic acid, salts Additive or polymer production aid All         31 December 2031 0722     822 perchloric acid, salts (perchlorate) Monomer or other reactant All     (37)   31 December 2031 0723     823 5-sulfoisophthalic acid, salts Monomer or other reactant All 250       31 December 2031 0724   329238-24-6 854 perfluoro acetic acid, α-substituted with the copolymer of perfluoro–1,2-propylene glycol and perfluoro–1,1-ethylene glycol, terminated with chlorohexafluoropropyloxy groups Additive or polymer production aid Plastics     (38) Only to be used in concentrations up to 0,5 % w/w in the polymerisation of fluoropolymers that are processed at temperatures at or above 340 °C. 31 December 2028 0725     855 (butadiene, styrene, methyl methacrylate) copolymer cross-linked with 1,3-butanediol dimethacrylate Additive or polymer production aid Plastics       Only to be used in rigid poly(vinyl chloride) (PVC) for cold water applications at a maximum level of 12 %. 31 December 2037 0726   25101-28-4 856 (butadiene, styrene, methyl methacrylate, butyl acrylate) copolymer cross-linked with divinylbenzene or 1,3-butanediol dimethacrylate Additive or polymer production aid Plastics       Only to be used in rigid poly(vinyl chloride) (PVC) for cold water applications at a maximum level of 12 %. 31 December 2037 0727   37953-21-2 857 (methyl methacrylate, butyl acrylate, styrene, glycidylmethacrylate) copolymer Additive or polymer production aid Plastics       Only to be used in rigid poly(vinyl chloride) (PVC) for cold water applications at a maximum level of 2 %. 31 December 2037 0728   90498-90-1 858 3,9-bis[2-(3-(3- tert -butyl-4-hydroxy-5-methylphenyl)propionyloxy)-1,1-dimethylethyl]- 2,4,8,10-tetraoxaspiro[5,5]undecane Additive or polymer production aid All 2,5 - expressed as the sum of the substance and its oxidation product 3-[(3-(3- tert -butyl-4-hydroxy-5-methylphenyl)prop-2-enoyloxy)-1,1-dimethylethyl]-9-[(3-(3- tert -butyl-4-hydroxy-5-methylphenyl)propionyloxy)-1,1-dimethylethyl]-2,4,8,10-tetraoxaspiro[5,5]-undecane in equilibrium with its para quinone methid tautomer       31 December 2037 0729     859 (butadiene, ethyl acrylate, methyl methacrylate, styrene) copolymer crosslinked with divinylbenzene, in nanoform Additive or polymer production aid Plastics       Only to be used as particles in non-plasticised PVC for cold water applications up to 10 % w/w in contact with water. When used together with the substance with EUPL Number 0761 and/ or the substance with EUPL Number 0767, the restriction of 10 % w/w applies to the sum of those substances. The diameter of particles shall be > 20 nm, and for at least 95 % by number it shall be > 40 nm. 31 December 2034 0730   51798-33-5 860 perfluoro[2-(poly(n-propoxy))propanoic acid] Additive or polymer production aid Plastics     (38) Only to be used in the polymerisation of fluoropolymers that are processed at temperatures at or above 265 °C. 31 December 2028 0731   13252-13-6 861 perfluoro[2-( n -propoxy)propanoic acid] Additive or polymer production aid Plastics     (38) Only to be used in the polymerisation of fluoropolymers that are processed at temperatures at or above 265 °C. 31 December 2028 0732   18085-02-4 862 3,4-diacetoxy-1-butene Monomer or other reactant Plastics 2,5 - including the hydrolysis product 3,4-dihydroxy-1-butene     Only to be used as a co-monomer for ethylvinylalcohol (EVOH) and polyvinylalcohol (PVOH) copolymers. Only a method for determination of the residual content of the substance in the polymer is available. 31 December 2037 0733   646-25-3 863 1,10-decanediamine Monomer or other reactant Plastics 2,5     Only to be used as a co-monomer for manufacturing polyamide articles for cold water applications. 31 December 2037 0734   56-06-4 864 2,4-diamino-6-hydroxypyrimidine Additive or polymer production aid Plastics 250     Only to be used in rigid poly(vinyl chloride) (PVC). 31 December 2034 0735   25322-99-0 865 (butyl acrylate, methyl methacrylate, butyl methacrylate) copolymer Additive or polymer production aid Plastics       Only to be used in: (a) rigid poly(vinyl chloride) (PVC) for cold water application at a maximum level of 1 % w/w; (b) polylactic acid (PLA) at a maximum level of 5 % w/w. 31 December 2037 0736     866 (butyl acrylate, methyl methacrylate) copolymer, cross-linked with allyl methacrylate Additive or polymer production aid Plastics       Only to be used in rigid poly(vinyl chloride) (PVC) for cold water application at a maximum level of 7 %. 31 December 2034 0737   40471-03-2 867 (butyl methacrylate, ethyl acrylate, methyl methacrylate) copolymer Additive or polymer production aid Plastics       Only to be used in rigid poly(vinyl chloride) (PVC) for cold water application at a maximum level of 2 %. 31 December 2037 0738   9010-88-2 868 (ethyl acrylate, methyl methacrylate) copolymer Additive or polymer production aid Plastics       Only to be used in: (a) rigid poly(vinyl chloride) (PVC) for cold water application at a maximum level of 2 % w/w; (b) polylactic acid (PLA) at a maximum level of 5 % w/w; (c) polyethylene terephthalate (PET) at a maximum level of 5 % w/w. 31 December 2037 0739   27136-15-8 869 (butyl acrylate, methyl methacrylate, styrene) copolymer Additive or polymer production aid Plastics       Only to be used in rigid poly(vinyl chloride) (PVC) for cold water application at a maximum level of 3 %. 31 December 2034 0740   160535-46-6 870 N , N ′, N″ -tris(2-methylcyclohexyl)-1,2,3-propane-tricarboxamide Additive or polymer production aid All 250       31 December 2037 0741   6607-41-6 872 2-phenyl–3,3-bis(4-hydroxyphe nyl)phthalimidine Monomer or other reactant Plastics 2,5     To be used only as a co-monomer in polycarbonate copolymers. The substance contains aniline as an impurity; verification of compliance with the restriction set for primary aromatic amines in Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368 is necessary. 31 December 2034 0742     873 titanium dioxide reacted with octyltriethoxysilane Additive or polymer production aid All       Reaction product of titanium dioxide with up to 2 % w/w surface treatment substance octyltriethoxysilane, processed at high temperatures. 31 December 2037 0743   156065-00-8 874 α-dimethyl-3-(4’-hydroxy-3’-methoxyphenyl)propylsilyloxy, w-3-dimethyl-3-(4’-hydroxy-3’-methoxyphenyl)propylsilyl polydimethylsiloxane Monomer or other reactant Plastics 2,5   (32) Only to be used as comonomer in siloxane modified polycarbonate. The oligomeric mixture shall be characterised by the formula C 24 H 38 Si 2 O 5 (SiOC 2 H 6 ) n (50 > n ≥ 26). 31 December 2037 0744   58128-22-6 875 poly(12-hydroxystearic acid) stearate Additive or polymer production aid All 250       31 December 2037 0745   3010-96-6 881 2,2,4,4-tetramethylcyclobutane–1,3-diol Monomer or other reactant Plastics 250     Only for use as co-monomer at a maximum use level of 35 mole % of the diol component of polyesters. 31 December 2034 0746   2416-94-6 882 2,3,6-trimethylphenol Monomer or other reactant All 2,5       31 December 2034 0747   4457-71-0 883 3-methyl–1,5-pentanediol Monomer or other reactant All 2,5     Only to be used in materials in contact with water at a CF (S/V ratio) of ≤ 0,5 dm -1 . 31 December 2034 0748   91082-17-6 884 alkyl(C 10 -C 21 )sulfonic acid, esters with phenol Additive Polymer production aid Other (processing aid) All 2,5       31 December 2028 0749   263244-54-8 885 cyclic oligomers of (butylene terephthalate) Additive or polymer production aid Plastics       Only to be used in poly(ethylene terephthalate) (PET), poly(butylene terephthalate) (PBT), polystyrene (PS) and rigid poly(vinyl chloride) (PVC) plastics in concentrations up to 1 % w/w for cold water applications. 31 December 2034 0750   16545-54-3 894 thiodipropionic acid, ditetradecyl ester Additive or polymer production aid All     (14)   31 December 2037 0751   171090-93-0 895 3-(3,5-di- tert -butyl-4-hydroxyphenyl)propanoic acid, esters with C 13 -C 15 branched and linear alcohols Additive Polymer production aid Other (processing aid) Plastics, rubber 2,5 For the MTC tap values of degradation products, refer to Table 4.   Only to be used in polyolefins. 31 December 2037 0752   958445-44-8 896 3 H -perfluoro-3-[(3-methoxy-propoxy)propanoic acid], ammonium salt Additive or polymer production aid Plastics     (38) For ammonium, refer to Annex V. Only to be used in the polymerisation of fluoropolymers when: — processed at temperatures higher than 280 °C for at least 10 minutes, — processed at temperatures higher than 190 °C up to 30 % w/w for use in blends with polyoxymethylene polymers. 31 December 2028 0753   37486-69-4 903 2 H -perfluoro-[(5,8,11,14-tetra methyl)-tetraethyleneglycol ethyl propyl ether] Polymer production aid Plastics     (38) Only to be used as a polymer production aid in the polymerisation of fluoropolymers that are (a) sintered or processed (non-sintered) at temperatures at or above 360 °C for at least 10 minutes or at higher temperatures for equivalent shorter times; (b) processed (non-sintered) at temperatures from 300 °C and up to 360 °C for at least 10 minutes. 31 December 2028 0754   120-40-1 923 N , N -bis(2-hydroxyethyl)dodecanamide Additive or polymer production aid All 250 diethanolamine MTC tap = 15 μg/l.     31 December 2037 0755   908020-52-0 926 perfluoro[(2-ethyloxy-ethoxy)acetic acid], ammonium salt Additive or polymer production aid Plastics     (38) For ammonium, refer to Annex V. Only to be used in the polymerisation of fluoropolymers that are processed at temperatures higher than 300 °C for at least 10 minutes. 31 December 2028 0756   24937-78-8 969 ethylene-vinyl acetate copolymer wax Additive or polymer production aid Plastics   The migration of low molecular weight oligomeric fraction below 1 000 Da shall not exceed 250 μg/l.   Only to be used as a polymeric additive up to 2 % w/w in polyolefins. 31 December 2034 0757   2459-10-1 971 trimethyl trimellitate Monomer or other reactant Plastics       Only to be used as a co-monomer up to 0,35 % w/w to produce modified polyesters. Only a method for determination of the residual content of the substance in the polymer is available. 31 December 2037 0758   19430-93-4 973 (perfluorobutyl)ethylene Monomer or other reactant Plastics     (38) Only to be used as a co-monomer up to 0,1 % w/w in the polymerisation of fluoropolymers, sintered at high temperatures. 31 December 2028 0759     979 (polyethylene terephthalate, hydroxylated polybutadiene, pyromellitic anhydride) copolymer Additive or polymer production aid Plastics       Only to be used in polyethylene terephthalate (PET) at a maximum level of 5 % w/w. 31 December 2037 0760   3634-83-1 988 1,3-bis(isocyanatomethyl)benzene Monomer or other reactant Plastics     (33) To be used only as co-monomer in the manufacture of a middle layer coating on a poly(ethylene terephthalate) polymer film in a multilayer film. 31 December 2034 0761     998 (butadiene, ethyl acrylate, methyl methacrylate, styrene) copolymer not cross-linked, in nanoform Additive or polymer production aid Plastics       Only to be used as particles in non-plasticised PVC up to 10 % w/w for cold water applications. When used together with the substance with EUPL Number 0729 and/ or the substance with EUPL Number 0767, the restriction of 10 % w/w applies to the sum of those substances. The diameter of particles shall be > 20 nm, and for at least 95 % by number it shall be > 40 nm. 31 December 2037 0762   976-56-7 1007 diethyl[[3,5-bis(1,1-dimethylethyl)-4-hydroxyphenyl]methyl]phosphonate Additive or polymer production aid Plastics   For the MTC tap values of degradation products, refer to Table 4.   Only to be used up to 0,2 % (w/w) based on the final polymer weight in the polymerisation process to manufacture poly(ethylene terephthalate) (PET) and poly(ethylene 2,5-furandicarboxylate) (PEF). 31 December 2034 0763     1016 (methacrylic acid, ethyl acrylate, n -butyl acrylate, methyl methacrylate and butadiene) copolymer in nanoform Additive or polymer production aid Plastics       Only to be used up to: (a) 10 % w/w in non-plasticised PVC in cold water applications; (b) 15 % w/w in non-plasticised PLA. 31 December 2037 0764   25618-55-7 1017 polyglycerol Additive or polymer production aid All       To be processed under conditions preventing the decomposition of the substance and up to a maximum temperature of 275 °C. 31 December 2037 0765   3238-40-2 1031 furan–2,5-dicarboxylic acid Monomer or other reactant Plastics 250 The migration of the oligomeric fraction of less than 1 000 Da shall not exceed 2,5 μg/l (expressed as furan–2,5-dicarboxylic acid).   Only to be used as a monomer in the production of polyethylene furanoate. A well described method suitable to determine the oligomer migration needs to be provided to the certifying body, as well as sufficient sample for calibration upon request. 31 December 2037 0766   3710-30-3 1034 1,7-octadiene Monomer or other reactant Plastics 2,5     Only to be used as a crosslinking co-monomer in the manufacture of polyolefins for cold water applications. 31 December 2037 0767     1043 (butadiene, ethyl acrylate, methyl methacrylate, styrene) copolymer crosslinked with 1,3-butanediol dimethacrylate, in nanoform Additive or polymer production aid Plastics       Only to be used as particles in non-plasticised PVC up to 10 % w/w for cold water applications. When used together with the substance with EUPL Number 0729 and/or the substance with EUPL Number 0761, the restriction of 10 % w/w applies to the sum of those substances. The diameter of particles shall be > 20 nm, and for at least 95 % by number it shall be > 40 nm. 31 December 2034 0768   1190931-27-1 1045 perfluoro{acetic acid, 2-[(5- methoxy–1,3-dioxolan-4-yl)oxy]}, ammonium salt Additive or polymer production aid Plastics     (38) For ammonium, refer to Annex V. Only to be used as a polymer production aid during the manufacture of fluoropolymers under high temperature conditions of at least 370 °C. 31 December 2028 0769   624-03-3 1048 ethylene glycol dipalmitate Additive or polymer production aid All     (2) Only to be used when produced from a fatty acid precursor that is obtained from edible fats or oils. 31 December 2034 0770     1050 zinc oxide, nanoparticles, uncoated Additive or polymer production aid Plastics, silicones     For zinc, refer to Annex V. When used in plastics, only to be used in unplasticised polymers. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2037 0771   42774-15-2 1051 N , N ′-bis(2,2,6,6-tetramethyl-4-piperidinyl) isophthalamide Additive or polymer production aid All 250       31 December 2037 0772   1455-42-1 1052 2,4,8,10-tetraoxaspiro[5,5]undecane–3,9-diethanol,β3,β3,β9,β9-tetramethyl- (‘SPG’) Monomer or other reactant Plastics 250 The migration of oligomers of less than 1 000 Da shall not exceed 2,5 μg/l water (expressed as SPG).   Only to be used as a monomer in the production of polyesters. A well described method to determine whether the oligomer migration complies with the restrictions specified shall be provided to the certifying body. This method shall be suitable for use by the certifying body for the purposes of certification. If the method requires a calibration sample, a sufficient sample shall be supplied to the certifying body on its request. 31 December 2037 0773   147398-31-0 1059 poly((R)-3-hydroxybutyrate-co-(R)-3-hydroxyhexanoate) ('PHBH') Additive or polymer production aid All   The migration of all oligomers with a molecular weight below 1 000 Da shall not exceed 250 μg/l. (34) The substance is a macromolecule obtained from microbial fermentation. 31 December 2037 0774     1060 ground sunflower seed hulls Additive or polymer production aid All       Only to be used for cold water applications. The seed hulls shall be obtained from sunflower seeds that are fit for human consumption. The processing temperature of the plastic containing the additive shall not exceed 240 °C. 31 December 2037 0775   80512-44-3 1061 2,4,4′-trifluorobenzophenone Monomer or other reactant Plastics       Only to be used as a co-monomer in the manufacture of polyether ether ketone plastics up to 0,3 % w/w of the final material. 31 December 2034 0776   1547-26-8 1063 2,3,3,4,4,5,5-heptafluoro-1-pentene Other (starting substance for a polymeric additive) Plastics     (38) Only to be used together with tetrafluoroethylene and/or ethylene co-monomers to manufacture fluorocopolymers for application as polymer processing aid at up to 0,2 % w/w of the drinking water contact material, and when the low-molecular mass fraction below 1 500 Da in the fluorocopolymer does not exceed 30 mg/kg. 31 December 2028 0777   39318-18-8 1064 tungsten oxide Additive or polymer production aid All     For tungsten, refer to Annex V. Stoichiometry: WO n , n = 2,72-2,90. When used as reheat agent in polyethylene terephthalate (PET) verification of compliance with the specific migration limit is not required; in all other cases compliance with the specific migration limit shall be verified in accordance with Commission Implementing Decision (EU) 2024/365. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2037 0778   85711-28-0 1065 mixture of methyl-branched and linear C 14 -C 18 alkanamides, derived from fatty acids Additive or polymer production aid Plastics 250     Only to be used in the manufacture of articles made of polyolefins. Migration of stearamide, under substance with EUPL Number 0248 to which no specific migration limit applies, shall be excluded from verification of the compliance of the migration of the mixture with the specific migration limit laid down for the mixture. 31 December 2028 0779   23985-75-3 1066 1,2,3,4-tetrahydronaphthalene–2,6-dicarboxylic acid, dimethyl ester Monomer or other reactant Plastics 2,5 - expressed as the sum of the substance and of its dimers (cyclic and open chain)     Only to be used in a plastic multilayer material, as a co-monomer in the manufacture of a polyester layer that is not in direct contact with water. 31 December 2037 0780   616-38-6 1067 dimethyl carbonate Monomer or other reactant All 2,5     Migration of sum of all polycarbonate oligomers with a molecular weight below 1 000 Da must be < 2,5 μg/l. A well described method suitable to determine the oligomer migration needs to be provided to the certifying body, as well as a sufficient sample for calibration upon request. Not for use with 1,6-hexanediol in the manufacture of polycarbonate pre-polymers to manufacture thermoplastic polyurethanes with 4,4′-methylenediphenyldiisocyanate and diols. 31 December 2037 0781   2530-83-8 1068 [3-(2,3-epoxypropoxy)propyl]trimethoxy silane Monomer or other reactant Plastics       Only to be used as a component of a sizing agent to treat glass fibres to be embedded in glass-fibre-reinforced low diffusivity plastics (polyethylene terephthalate (PET), polybutylene terephthalate (PBT) and thermoset polyesters and epoxy bisphenol vinylester) in contact with water. In treated glass fibres, residues of the substance must not be detectable at 0,01 mg/kg for the substance and 0,06 mg/kg for each of the reaction products (hydrolysed monomers and epoxy-containing cyclic dimer, trimer and tetramer). 31 December 2037 0782   75-28-5 1069 isobutane Polymer production aid All         31 December 2034 0783   1227937-46-3 1076 phosphorous acid, triphenyl ester, polymer with alpha-hydro-omega-hydroxypoly[oxy(methyl–1,2-ethanediyl)], C 10 -C 16 alkyl esters Additive or polymer production aid Plastics 2,5     To be used only: a) as an additive at up to 0,2 % w/w in high impact polystyrene for cold water applications. b) as an additive at up to 0,025% w/w in acrylonitrile-butadiene-styrene (ABS) materials for cold water applications. 31 December 2037 0784   3319-31-1 1078 tris(2-ethylhexyl) benzene-1,2,4-tricarboxylate Additive or polymer production aid Plastics     (31) Only to be used as plasticiser to manufacture soft polyvinyl chloride. 31 December 2034 0785   156157-97-0 1080 (triethanolamine-perchlorate, sodium salt) dimer Additive or polymer production aid Plastics     (36) (37) Only to be used in rigid polyvinyl chloride. 31 December 2034 0786   52628-03-2 1082 phosphoric acid, mixed esters with 2-hydroxyethyl methacrylate Monomer or other reactant Plastics 2,5 - expressed as the sum of the mono-, di- and triesters of phosphoric acid and the mono-, di-, tri- and tetraesters of diphosphoric acid.     Only to be used at up to 0,35 % (w/w) to manufacture polymethylmethacrylate. 31 December 2037 0787   2421-28-5 1083 benzophenone–3,3’,4,4’-tetracarboxylic dianhydride (‘BTDA’) Monomer or other reactant Plastics 2,5     Only to be used at up to 43 % (w/w) as a co-monomer in the production of polyimides. 31 December 2037 0788   9005-82-7   amylose Aid to polymerisation Coatings         31 December 2028 0789   2634-33-5   1,2-benzisothiazol-3(2 H )-one Additive Polymer production aid Other (in-can preservative) Rubber, silicone, coatings 25     Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 3.4 and 4.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2034 0790   119-53-9   benzoin Polymer production aid Coatings 2,5       31 December 2034 0791   7637-07-2   boron trifluoride Aid to polymerisation Plastics, rubber     For boron and fluoride, refer to Annex V.   31 December 2034 0792   109-63-7   boron trifluoride etherate Aid to polymerisation Plastics     For boron and fluoride, refer to Annex V.   31 December 2034 0793   75-65-0   tert -butanol Polymer production aid Plastics, coatings 500       31 December 2034 0794   25085-50-1   4- tert -butylphenol formaldehyde resin Aid to polymerisation Rubber   4- tert butylphenol MTC tap = 2,5 μg/l formaldehyde MTC tap = 750 μg/l xylene MTC tap = 50,0 μg/l (15) Oligomers MW < 1 000 Da: max. 25 %; methylol groups: max. 16 %. 31 December 2034 0795   7789-75-5   calcium fluoride Additive Plastics     For fluoride, refer to Annex V. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2034 0796   8007-24-7   cashew nut shell liquid, distilled ( > 90 % cardanol) Monomer or other reactant Coatings 2,5     Not for use as reactive diluent. 31 December 2034 0797   9004-35-7   cellulose acetate Monomer or other reactant Coatings         31 December 2028 0798   9004-39-1   cellulose acetate propionate Monomer or other reactant Coatings         31 December 2028 0799   26172-55-4   5-chloro-2-methyl-2 H -isothiazol-3-one Other (in-can preservative) Coatings, silicone 0,5     Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 3.4 and 4.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0800   21679-31-2   chromium(III)acetylacetonate Polymer production aid Plastics     For chromium, refer to Annex V.   31 December 2034 0801   10025-73-7   chromium(III)chloride Aid to polymerisation Plastics     For chromium, refer to Annex V.   31 December 2034 0802   11118-57-3   chromium oxide Aid to polymerisation Plastics     For chromium, refer to Annex V.   31 December 2034 0803   7681-65-4   copper(I)iodide Aid to polymerisation Plastics, rubber, coatings     (6) For copper, refer to Annex V.   31 December 2034 0804   110-05-4   di- tert -butyl peroxide Aid to polymerisation Plastics, rubber 0,1 tert -butanol MTC tap = 500 μg/l methyl tert -butyl ether MTC tap = 15 μg/l     31 December 2034 0805   75-09-2   dichloromethane Polymer production aid Plastics, rubber, coatings 2,5       31 December 2028 0806   112-34-5   diethylene glycol monobutyl ether (DEGBE) Polymer production aid Coatings, silicone     (40)   31 December 2034 0807   127-19-5   dimethylacetamide Polymer production aid Plastics 2,5       31 December 2028 0808   1323-83-7   distearic acid, diester with glycerol Additive Polymer production aid Plastics         31 December 2028 0809   100-41-4   ethylbenzene Polymer production aid Plastics, coatings, silicone 30       31 December 2034 0810   111-76-2   ethyleneglycol monobutyl ether Polymer production aid Coatings, silicone     (2)   31 December 2034 0811   112-25-4   ethyleneglycol monohexyl ether Polymer production aid Coatings     (2)   31 December 2034 0812   31566-31-1   glycerol monostearate Additive Polymer production aid Rubber, coatings, silicone         31 December 2034 0813   1333-74-0   hydrogen Polymer production aid Rubber         31 December 2037 0814   8006-54-0   lanolin (pharmacopeia grade) Aid to polymerisation Coatings         31 December 2028 0815   25182-44-9   methacrylic acid, chromium (III) salt Polymer production aid Aid to polymerisation Plastics     (22) For chromium, refer to Annex V.   31 December 2028 0816   78-93-3   methyl ethyl ketone (butan-2-one) Polymer production aid Additive Plastics, coatings, silicone, lubricants 250       31 December 2034 0817   108-10-1   methyl isobutyl ketone (4-methylpentan-2-one) Polymer production aid Plastics, coatings, silicone 250       31 December 2028 0818   2163-42-0   2-methylpropane–1,3-diol Monomer or other reactant Coatings 250       31 December 2034 0819   7782-44-7   oxygen Aid to polymerisation Plastics         31 December 2037 0820   27619-97-2   perfluorohexylethylsulfonic acid Additive Polymer production aid Plastics, coatings 0,1   (38) (39)   31 December 2028 0821   103-71-9   phenyl isocyanate Monomer or other reactant Coatings     (16) Maximum residual content in the final material (QM) = 1 mg/kg expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2034 0822   1314-56-3   phosphoric anhydride Monomer or other reactant Aid to polymerisation Coatings         31 December 2034 0823   9014-85-1   polyethyleneglycol-2,4,7,9-tetramethyl-5-decyn–4,7-diol ether Additive Polymer production aid Coatings       Only to be used for sintered PTFE coatings. 31 December 2034 0824   37349-34-1   polyglyceryl-5 stearate Additive Coatings, silicone         31 December 2037 0825   9046-10-0   polyoxypropylene diamine (POPDA) Monomer or other reactant Coatings 2,5     Average MW≥230 Da; purity: min. 80 % POPDA. 31 December 2037 0826   9002-89-5   polyvinyl alcohol Additive Polymer production aid Plastics, rubber       Production by sintering. Maximum residual content in the final material (QM) = 20 000 mg/kg. 31 December 2037 0827   12136-45-7   potassium oxide Additive Plastics       If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2034 0828   9000-59-3   shellac Monomer or other reactant Coatings         31 December 2028 0829   7681-49-4   sodium fluoride Additive Plastics     For fluoride, refer to Annex V. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2034 0830   1313-59-3   sodium oxide Additive Polymer production aid Other (processing aid) All       If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2034 0831   7782-99-2   sulfurous acid Additive Plastics, rubber     (18) If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0832   7646-78-8   tin(IV)chloride Aid to polymerisation Coatings         31 December 2034 0833   108-88-3   toluene Additive Polymer production aid Rubber, coatings, silicone 60     Note: the MTC tap is higher than the odour threshold. 31 December 2034 0834   101-37-1   triallylcyanurate Aid to polymerisation Rubber 2,5       31 December 2034 0835   16938-22-0   2,2,4-trimethylhexane–1,6 diisocyanate Monomer or other reactant Coatings     (16) Maximum residual content in the final material (QM) = 1 mg/kg expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2028 0836   15646-96-5   2,4,4-trimethylhexane–1,6-diisocyanate Monomer or other reactant Coatings     (16) Maximum residual content in the final material (QM) = 1 mg/kg expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2028 0837   3048-64-4   5-vinyl-2-norbornene Monomer or other reactant (comonomer) Rubber 2,5       31 December 2034 0838       wheat protein Polymer production aid Additive All         31 December 2028 0839   1330-20-7   xylene Polymer production aid Plastics, coatings, silicone 50     Note: the MTC tap is higher than the odour threshold. 31 December 2034 0840       zinc dust Additive Coatings     For zinc, refer to Annex V. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2034 0841   55799-16-1   zinc hydroxyphosphite Additive Coatings     For zinc, refer to Annex V. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0842   17501-44-9   acetyl acetonic acid, zirconium salt Monomer or other reactant Aid to polymerisation Silicone         31 December 2031 0843   63449-41-2   alkyl(C 8 -C 18 )dimethylbenzylammonium chloride Additive Polymer production aid Lubricants         31 December 2028 0844   54326-11-3   aluminium hydroxide benzoate stearate Polymer production aid Additive Lubricants     For aluminium, refer to Annex V.   31 December 2031 0845   1760-24-3   [3-(2-aminoethyl)aminopropyl]trimethoxysilane Polymer production aid Plastics, coatings 0,1       31 December 2031 0846   26125-61-1   aramid fibres Additive (polymeric) Rubber   p -phenylendiamine MTC tap = 0,1 μg/l terephthalic acid MTC tap = 375 μg/l     31 December 2034 0847   95-33-0   benzothiazyl-2-cyclohexylsulfenamide Aid to polymerisation Rubber 0,1 2-mercaptobenzothiazole (2-MBT) (CAS No. 149-30-4) MTC tap = 100 μg/l 2,2‘-Ddithio-bis-benzothiazole (Di(benzothiazole-2-yl)disulfide, MBTS) (CAS No. 120-78-5) MTC tap = 2.5 μg/l benzothiazole (BT) (CAS No. 95-16-9) MTC tap = 0.1 μg/l 2-benzothiazolone (BTon) (CAS No. 934-34-9) MTC tap = 0.1 μg/l cyclohexylamine (CAS No. 108-91-8) MTC tap = 2.5 μg/l (43)   31 December 2031 0848   78-63-7   2,5-bis( tert -butylperoxy)-2,5-dimethylhexane Aid to polymerisation Plastics, rubber, coatings 0,1 When used for rubber, the following degradation products are relevant: tert -butanol MTC tap = 500 μg/l tert -amylalcohol MTC tap = 0,1 μg/l 2,5-dimethyl-hexanediol MTC tap = 0,1 μg/l 2,2,5,5-tetramethyltetrahydrofurane MTC tap = 0,1 μg/l (NB. it could not be analysed as no standard available) For DHBP application above 0.4%: 3,3,6,6-tetramethyl–1,2-dioxane MTC tap = 0,1 μg/l di- tert -butylperoxide MTC tap = 0,1 μg/l (both impurities of DHBP)     31 December 2031 0849   25155-25-3 {2212-81-9 & 2781-00-2}   1,3-(and/or 1,4)-bis( tert -butylperoxyisopropyl)benzene Aid to polymerisation Plastics, rubber 0,1     No peroxide on the product surface. 31 December 2031 0850   85-60-9   bis(2-methyl-4-hydroxy-5- tert -butylfenyl)butane Additive Rubber 15       31 December 2031 0851   101-67-7   bis(4-octylphenyl)amine; (4,4'-dioctyldiphenylamine) Additive Rubber 2,5     Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0852   39817-09-9   bisphenol-F-diglycidylether (BFDGE; bis(hydroxyphenyl) methane bis(2,3-epoxypropyl) ethers) Monomer or other reactant (resin) Coatings 2,5 - expressed as the sum of BFDGE and hydrolysis products bisphenol F MTC tap = 2,5 μg/l epichlorohydrin MTC tap = 0.1 μg/l (49)   31 December 2028 0853   7726-95-6   bromine Monomer or other reactant Rubber         31 December 2031 0854   95-31-8   N - tert -butyl-2-benzothiazolesulfenamide Aid to polymerisation Rubber     (43)   31 December 2031 0855   98-29-3   4- tert -butylcatechol Additive Coatings, silicone         31 December 2031 0856   3457-61-2   tert -butylcumylperoxide Aid to polymerisation Coatings, silicone       No peroxide on the product surface. 31 December 2031 0857   17540-75-9   4- sec -butyl-2,6-di- tert -butylphenol Additive Plastics, rubber 2,5 For the MTC tap values of degradation products, refer to Table 4.     31 December 2031 0858   88-18-6   2- tert -butylphenol Monomer of other reactant Plastics, coatings 0,1       31 December 2031 0859   2556-36-7   1,4-cyclohexanediisocyanate Monomer or other reactant Coatings     (16) Maximum residual content in the final material (QM) = 1 mg/kg expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2028 0860   17796-82-6   N -(cyclohexylthio)phthalimide Aid to polymerisation Rubber 150       31 December 2031 0861   101-77-9   4,4'-diaminodiphenylmethane Monomer or other reactant Coatings 0,1       31 December 2028 0862   68953-84-4   N , N '-diaryl-p-phenylenediamine Additive Rubber 0,1       31 December 2031 0863   94-36-0   dibenzoyl peroxide Aid to polymerisation Plastics, rubber, silicone 0,1       31 December 2031 0864   6731-36-8   1,1-di- tert -butylperoxy-3,3,5-trimethylcyclohexane Aid to polymerisation Plastics, rubber 0,1     No peroxide on the product surface. 31 December 2031 0865   96-76-4   2,4-di- tert -butylphenol Additive Rubber         31 December 2031 0866   77-58-7   dibutyltin dilaurate Aid to polymerisation Plastics, coatings, silicone 0,1       31 December 2028 0867   133-14-2   2,4-dichlorobenzoyl peroxide Aid to polymerisation Coatings, silicone 0,1     No peroxide on the product surface. 31 December 2031 0868   80-43-3   dicumyl peroxide Aid to polymerisation Plastics, rubber, silicone 0,1 When used for rubber or silicone, the following degradation products are relevant: cumylalcohol MTC tap = 2,5 μg/l methylcumylether MTC tap = 0,1 μg/l alpha-methylstyrene MTC tap = 0,7 μg/l acetophenone MTC tap = 2,5 μg/l     31 December 2031 0869   77-73-6   dicyclopentadiene Monomer or other reactant Rubber 2,5       31 December 2031 0870   111-90-0   diethyleneglycol monoethyl ether Polymer production aid Coatings     (40)   31 December 2031 0871   140-01-2   diethylenetriaminepentaacetic acid pentasodium salt Polymer production aid Plastics         31 December 2028 0872   3710-84-7   N , N -diethylhydroxylamine Aid to polymerisation Plastics       Maximum dosage = 0,02 % (w/w). Maximum quantity of diethylamine impurity in the product 0,1 %. Maximum quantity of N -nitrosodiethylamine impurity in the product 0,5 mg/kg. 31 December 2031 0873   1047-16-1   5,12-dihydroquino[2,3-b]acridine–7,14-dione Additive Plastics, coatings       If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 0874   3437-84-1   diisobutyryl peroxide Aid to polymerisation Plastics 0,1     Maximum dosage = 0,02 % (w/w). No peroxide on the product surface. 31 December 2031 0875   105-74-8   dilauroyl peroxide Aid to polymerisation Plastics       No peroxide on the product surface. 31 December 2031 0876   109-87-5   dimethoxymethane Monomer or other reactant Aid to polymerisation Plastics         31 December 2031 0877   124-40-3   dimethylamine Monomer or other reactant Rubber, coatings 3,0       31 December 2031 0878   7005-47-2   2-dimethylamino-2-methyl-1-propanol Additive Plastics         31 December 2031 0879   895-85-2   di(4-methyl-benzoyl)peroxide Aid to polymerisation Silicone       No peroxide on the product surface. Not for use in rubber. 31 December 2031 0880   53880-86-7   dimethyldiphenylthiuram disulfide Aid to polymerisation Rubber     (42)   31 December 2028 0881   115-10-6   dimethyl ether Polymer production aid Coatings < 1       31 December 2031 0882   68-12-2   N , N -dimethylformamide Polymer production aid Plastics, coatings 2,5       31 December 2028 0883   70131-67-8   dimethylsiloxane, hydroxy terminated Monomer or other reactant (base oil) Lubricants         31 December 2028 0884   3806-34-6   dioctadecyl pentaerythritol diphosphite Additive Plastics         31 December 2031 0885   971-15-3   di- N -pentamethylenethiuram hexasulfide Aid to polymerisation Rubber     (42)   31 December 2031 0886   120-54-7   di- N -pentamethylenethiuram tetrasulfide Aid to polymerisation Rubber     (42)   31 December 2028 0887   122-39-4   diphenylamine Aid to polymerisation Plastics, rubber       Maximum dosage = 0,1 % (w/w). 31 December 2031 0888   68411-46-1   diphenylamine, octylated Additive Rubber       Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. Maximum residual content in the final material (QM) = 15 g/kg. 31 December 2031 0889   102-06-7   N , N -diphenylguanidine Aid to polymerisation Rubber 2,5       31 December 2028 0890   120-78-5   dithiobis(2-benzothiazole) Aid to polymerisation Rubber 2,5 mercaptobenzothiazol MTC tap = 100 μg/l N -nitrosamines MTC tap = 0,3 μg/l (43)   31 December 2031 0891   87057-87-2   2-ethylbutane–1,4-diisocyanate Monomer or other reactant Coatings     (16) Maximum residual content in the final material (QM) = 1 mg/kg, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2028 0892   110-80-5   ethyleneglycol monoethyl ether Monomer or other reactant Polymer production aid Coatings, silicone     (2)   31 December 2028 0893   109-86-4   ethyleneglycol monomethyl ether Polymer production aid Coatings     (2)   31 December 2028 0894   149-57-5   2-ethylhexanoic acid Additive Polymer production aid Plastics 2,5       31 December 2031 0895   17689-77-9   ethyltrisacetoxysilane Aid to polymerisation Silicone         31 December 2031 0896   28106-30-1   ethylvinylbenzene Monomer or other reactant Plastics     (44)   31 December 2028 0897   78-27-3   ethynylcyclohexanol Polymer production aid Rubber, coatings, silicone 900       31 December 2031 0898   9003-08-1   formaldehyde-2,4,6-triamino-1,3,5-triazine, copolymer Additive Coatings     (15) Only for sintered PTFE. 31 December 2037 0899   9006-24-0   formaldehyde-xylene, copolymer Monomer or other reactant (resin) Other (processing aid) Rubber     (15)   31 December 2028 0900   592-45-0   1,4-hexadiene Monomer or other reactant Rubber     (45)   31 December 2028 0901   592-42-7   1,5-hexadiene Monomer or other reactant Rubber     (45)   31 December 2031 0902   16096-31-4   1,6 hexanediol diglycidyl ether Additive Coatings 0,1       31 December 2028 0903       2-hydroxy-2-sulfinato acetic acid, disodium salt Aid to polymerisation Plastics     (18) When used in a mixture of 2-hydroxy-2-sulfinato acetic acid, disodium salt (35-60 %), 2-hydroxy-2-sulfonato acetic acid, disodium salt (10-60 %) and sodium sulfite (0-40 %) (mixture), the maximum dosage shall be 0,5 %. 31 December 2028 0904       2-hydroxy-2-sulfonato acetic acid, disodium salt Aid to polymerisation Plastics     (18) When used in a mixture of 2-hydroxy-2-sulfinato acetic acid, disodium salt (35-60 %), 2-hydroxy-2-sulfonato acetic acid, disodium salt (10-60 %) and sodium sulfite (0-40 %) (mixture), the maximum dosage shall be 0,5 %. 31 December 2028 0905   2226-96-2   4-hydroxy-2,2,6,6-tetramethylpiperidinoxyl Aid to polymerisation Plastics 2,5     No peroxide on the product surface. 31 December 2031 0906   55406-53-6   3-iodo-2-propynylbutylcarbamate Aid to polymerisation Rubber, coatings         31 December 2031 0907   78-83-1   isobutanol Polymer production aid Silicone         31 December 2031 0908   7425-80-1   isobutyl titanate Aid to polymerisation Silicone         31 December 2031 0909   3999-01-7   linoleamide Aid to polymerisation Coatings, silicone         31 December 2028 0910   149-30-4   2-mercaptobenzothiazole Aid to polymerisation Rubber 100   (43)   31 December 2031 0911   60-24-2   2-mercaptoethanol Additive Plastics, rubber 2,5       31 December 2031 0912   68440-24-4   mercaptoethyl tallate Additive or polymer production aid Plastics 1500       31 December 2028 0913   115-19-5   methyl-2-butyn-3-ol-2 Aid to polymerisation Coatings, silicones         31 December 2031 0914   15520-10-2   2-methyl–1,5-diaminopentane Monomer or other reactant Coatings 5,0       31 December 2031 0915   7786-17-6   2,2-methylenebis(4-methyl-6-nonylphenol) Additive Plastics, rubber 0,1       31 December 2031 0916   598-09-4   methylepichlorhydrin Monomer or other reactant Coatings 0,1       31 December 2028 0917   96-29-7   methyl ethyl ketone oxime Aid to polymerisation Coatings 120     Only for hot curing coatings. 31 December 2028 0918   693-98-1   2-methylimidazole Additive Coatings 2,5       31 December 2028 0919   534-26-9   2-methylimidazoline Additive or polymer production aid Coatings 0,1       31 December 2028 0920   34813-62-2   2-methylpentane–1,5-diisocyanate Monomer or other reactant Coatings     (16) Maximum residual content in the final material (QM) = 1 mg/kg expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2028 0921   201687-58-3   methyltin-2-mercaptoethyl tallate Aid to polymerisation Plastics 9,0       31 December 2028 0922   4253-34-3   methyltrisacetoxysilane Aid to polymerisation Silicone         31 December 2031 0923   22984-54-9   methyltrisbutanoximosilane Aid to polymerisation Silicone         31 December 2031 0924 240-040-8 15901-40-3   methyltriscyclohexylaminosilane Aid to polymerisation Silicone         31 December 2031 0925 253-634-7 37697-65-7   methyltris- sec .-butylaminosilane Aid to polymerisation Silicone         31 December 2031 0926       polytitanic acid, butyl ester (butylpolytitanate) Aid to polymerisation Silicone         31 December 2028 0927   108-90-7   monochlorobenzene Additive Plastics, coatings 1,0       31 December 2031 0928   51240-95-0   neodecaneperoxoic acid, 1,1,3,3-tetramethylbutyl ester Aid to polymerisation Plastics 0,1     Maximum dosage = 0,06 % (w/w). No peroxide on the product surface. 31 December 2031 0929   9084-06-4   naphthalene sulfonic acid-formaldehyde condensation product, sodium salt Polymer production aid Plastics, rubber     (15) Only for sintered products. 31 December 2037 0930   7697-37-2   nitric acid Polymer production aid Plastics, coatings 5,0       31 December 2031 0931   26530-20-1   2-octyl-2 H -isothiazole-3-one Other (in-can preservative) Rubber       Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 3.4 and 4.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 0932   8012-95-1 8042-47-5   paraffin oil Additive Plastics, rubber         31 December 2031 0933   614-45-9   peroxybenzoic acid, tert -butyl ester Aid to polymerisation Plastics, coatings 0,1       31 December 2031 0934   15520-11-3   peroxydicarbonic acid, bis(4- tert -butylcyclohexyl) ester Aid to polymerisation Plastics, coatings 0,1     No peroxide on the product surface. 31 December 2031 0935   16111-62-9   peroxydicarbonic acid, bis(2-ethylhexyl) ester Aid to polymerisation Plastics 0,1     No peroxide on the product surface. 31 December 2031 0936   26322-14-5   peroxydicarbonic acid, dicetyl ester Aid to polymerisation Plastics 0,1     No peroxide on the product surface. 31 December 2031 0937   53220-22-7   peroxydicarbonic acid, dimyristyl ester Aid to polymerisation Plastics 0,1     No peroxide on the product surface. 31 December 2031 0938   927-07-1   peroxypivalic acid, tert -butyl ester Aid to polymerisation Plastics 0,1       31 December 2031 0939   3006-82-4   peroxy-2-ethylhexanoic acid, tert -butyl ester Aid to polymerisation Plastics, rubber 0,1       31 December 2031 0940   7775-27-1   peroxydisulfuric acid, disodium salt Aid to polymerisation Plastics, coatings 0,1       31 December 2031 0941   26748-41-4   peroxyneodecanoic acid, tert -butyl ester Aid to polymerisation Plastics 0,1       31 December 2031 0942   7727-21-1   peroxydisulfuric acid, dipotassium salt Aid to polymerisation Plastics, coatings 0,1       31 December 2031 0943   68610-06-0   phenols, butylated, isobutylated or octylated Additive Rubber   For the MTC tap values of degradation products, refer to Table 4.     31 December 2028 0944   61788-44-1   phenols, styrenated Additive Rubber, coatings         31 December 2031 0945   936-49-2   2-phenylimidazol Monomer or other reactant Coatings 2,5       31 December 2031 0946   104-49-4   1,4-phenylene diisocyanate Monomer or other reactant Coatings     (16) Maximum residual content in the final material (QM) = 1 mg/kg expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2031 0947   7774-80-3   phenyl- o -tolyl-phenylenediamine Additive Rubber 0,1       31 December 2028 0948   126-73-8   phosphoric acid, tributyl ester Additive Polymer production aid Rubber         31 December 2028 0949   10294-56-1   phosphorous acid Additive Rubber       If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0950   54771-30-1   phosphorous acid, dinonylphenyl bis(nonylphenyl) ester Additive Plastics 300       31 December 2028 0951   84-61-7   phthalic acid, dicyclohexyl ester Additive Plastics 300     Maximum dosage = 5 % (w/w) as sum of all phthalates. 31 December 2028 0952   110-85-0   piperazine Monomer or other reactant Plastics, rubber 75       31 December 2028 0953   9003-01-4   polyacrylic acid Additive Rubber     (21)   31 December 2031 0954   9003-29-6   polybutene Monomer or other reactant (base oil) Additive Polymer production aid Rubber, lubricants       Molecular weight > 1 000 Da. 31 December 2034 0955   68937-10-0   polybutene, hydrogenated Monomer or other reactant (base oil) Lubricants       Molecular weight > 1 000 Da. 31 December 2037 0956   68132-00-3   polycyclopentadiene Monomer or other reactant (resin) Plastics         31 December 2028 0957       polyethyleneamine Additive Plastics, coatings       For polypropylene as an anchoring agent: ≤ 0,05 μg/dm 2 provided that the product does not release ethyleneimine. 31 December 2031 0958       polyethylene aminostearamide ethylsulfate Additive Coatings         31 December 2034 0959   28208-80-2   poly(ethylene-co-acrylic acid), zinc salt Monomer or other reactant Plastics     (21) For zinc, refer to Annex V.   31 December 2037 0960   9005-07-6   polyethyleneglycol dioleate Additive Coatings         31 December 2034 0961   9003-27-4   polyisobutene Monomer or other reactant (base oil) Additive (polymeric) for rubber Plastics, rubber, lubricants       Molecular weight > 1 000 Da. 31 December 2037 0962       poly(styrene-co-maleic anhydride) Additive Plastics         31 December 2037 0963   9002-84-0   polytetrafluoroethylene Additive (polymeric) Coatings, lubricants, silicone 2,5 - for the residual tetrafluoroethylene   (38)   31 December 2028 0964   25498-06-0   polyvinyl cyclohexane Polymer production aid Rubber         31 December 2037 0965       poly(vinyl methyl ether) Additive Plastics         31 December 2037 0966   35674-65-8   N , N ''-1,3-propanediyl bis-( N '-octadecylurea) Additive Polymer production aid Coatings 2,5       31 December 2031 0967   108-32-7   propylene carbonate Polymer production aid Lubricants         31 December 2031 0968   122-62-3   sebacic acid, bis(2-ethylhexyl) ester Additive (polymeric) Plastics         31 December 2031 0969   52829-07-9   sebacic acid, bis(2,2,6,6-tetramethyl-4-piperidyl) ester Additive Polymer production aid Plastics, lubricants 300       31 December 2031 0970       sodium aluminate Additive Coatings       If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 0971   149-44-0   sodium hydroxymethanesulfinate Aid to polymerisation Plastics       Maximum dosage = 0,07 % (w/w). 31 December 2031 0972       stearoyl-palmitoyl-benzoyl-methane Monomer or other reactant Plastics         31 December 2028 0973   68442-68-2   styrene, reaction product with diphenylamine Additive Rubber 2,5       31 December 2031 0974   126-33-0   sulfolane Polymer production aid Plastics 2,5       31 December 2031 0975   7446-09-5   sulfur dioxide Monomer or other reactant Rubber         31 December 2031 0976   10591-85-2   tetrabenzylthiuram disulfide Aid to polymerisation Rubber     (42)   31 December 2031 0977   5593-70-4   tetra- n -butyl titanate Aid to polymerisation Plastics, rubber, silicone         31 December 2031 0978   97-77-8   tetraethylthiuram disulfide Aid to polymerisation Plastics, rubber     (42)   31 December 2031 0979   811-97-2   1,1,1,2-tetrafluoroethane Additive Plastics     (38) Maximum dosage = 2,2 % (w/w). 31 December 2028 0980   3064-73-1   tetraisobutylthiuramdisulfide Additive or polymer production aid Rubber     (42)   31 December 2031 0981   126-86-3   2,4,7,9-tetramethyl-5-decyne–4,7-diol Aid to polymerisation Rubber       Maximum dosage = 0,1 % (w/w). 31 December 2031 0982   137-26-8   tetramethylthiuram disulfide Aid to polymerisation Rubber     (42)   31 December 2031 0983   97-74-5   tetramethylthiuram monosulfide Aid to polymerisation Rubber     (42)   31 December 2031 0984   26471-62-5   toluene diisocyanate Monomer or other reactant Coatings     (16) Maximum residual content in the final material (QM) = 1 mg/kg, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2031 0985   104-15-4   p -toluenesulfonic acid Aid to polymerisation Plastics, rubber 0,5       31 December 2031 0986   93-69-6   o -tolylbiguanidine Aid to polymerisation Rubber 0,1       31 December 2031 0987   1025-15-6   triallyl isocyanurate Aid to polymerisation Rubber 0,1       31 December 2031 0988   28807-72-9   tricyclododecane diisocyanate Monomer or other reactant Coatings     (16) Maximum residual content in the final material (QM) = 1 mg/kg, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2028 0989   90-72-2   2,4,6-tri(dimethylaminomethyl)phenol Aid to polymerisation Rubber, coatings 0,1       31 December 2031 0990   78-40-0   triethyl phosphate Additive Polymer production aid Plastics, coatings 375       31 December 2031 0991   7718-98-1   vanadium chloride Aid to polymerisation Plastics, rubber     For vanadium, refer to Annex V.   31 December 2031 0992   11099-11-9   vanadium oxide Aid to polymerisation Plastics, rubber     For vanadium, refer to Annex V.   31 December 2028 0993   88-12-0   vinylpyrrolidone Monomer Additive Polymer production aid Plastics         31 December 2028 0994   14726-36-4   zinc dibenzyldithiocarbamate Aid to polymerisation Rubber     (42) For zinc, refer to Annex V.   31 December 2031 0995   136-23-2   zinc dibutyldithiocarbamate Aid to polymerisation Rubber     (42) For zinc, refer to Annex V.   31 December 2031 0996   14324-55-1   zinc diethyldithiocarbamate Aid to polymerisation Rubber     (42) For zinc, refer to Annex V.   31 December 2031 0997   137-30-4   zinc dimethyldithiocarbamate Aid to polymerisation Other (in-can preservative) Rubber, coatings     (42) For zinc, refer to Annex V. Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 3.4 and 4.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 0998   136-53-8   zinc-di-2-ethylhexanoate Monomer or other reactant Silicone       Maximum residual content in the final material (QM) = 15 g/kg. 31 December 2031 0999   53801-45-9   zirconium oxide Additive Plastics, rubber     For zirconium, refer to Annex V.   31 December 2028 1000   1068-27-5   2,5-bis( tert -butylperoxy)-2,5-dimethyl-3-hexyne Aid to polymerisation Plastics 0,1       31 December 2031 1001   1071-93-8   adipic acid dihydrazide Monomer or other reactant Coatings 2,5 hydrazine MTC tap = 0,1 μg/l – to be checked by analysis.   Only for powder coatings. 31 December 2034 1002   1338-23-4   2-butanone peroxide Polymer production aid Aid to polymerisation Plastics 0,1       31 December 2031 1003   13822-56-5   3-(trimethoxysilyl)propylamine Monomer or other reactant Coatings 85 - expressed as silicon     Only for use in gas phase coatings on silicones, at max 400 °C; Si/N ratio in the layer should be at least 11. 31 December 2031 1004   14024-18-1   acetylacetonate, iron salt Polymer production aid Aid to polymerisation Plastics, coatings 2,5     Maximum dosage = 0,01 % (w/w). 31 December 2031 1005   1503-48-6   quino [2, 3-b]acridine-6,7,13,14(5 H ,12 H )-tetrone (quinacridinone quinone, QAQ) Additive Plastics 2,0     Purity > 90% QAQ. Specific nanomaterial (> 50% 1-100 nm) in maximum one particle dimension (platelets). 31 December 2031 1006   22288-41-1   1,1,3,3-tetramethylbutyl peroxypivalate Polymer production aid Aid to polymerisation Plastics 1,0     Maximum dosage = 0,007 % (w/w). 31 December 2031 1007   24748-23-0   3,6,9-triethyl-3,6,9-trimethyl-1,2,4,5,7,8-hexoxonane Polymer production aid Aid to polymerisation Plastics 0,1     Maximum dosage = 0,05 % (w/w). 31 December 2031 1008   29240-17-3   (1,1-dimethylpropyl) 2,2-dimethyl-propaneperoxoate Polymer production aid Aid to polymerisation Plastics 0,1     Maximum dosage = 0,2 % (w/w). 31 December 2031 1009   37187-22-7   acetylacetone peroxide Aid to polymerisation Plastics 0,1       31 December 2028 1010   681-84-5   tetramethylorthosilicate Monomer or other reactant Coatings       Only for use in gas phase coatings on silicones. 31 December 2031 1011   94-96-2   2-ethyl–1,3-hexanediol Monomer or other reactant Plastics, coatings 2,5       31 December 2031 1012   3851-87-4   di-(3,5,5-trimethyl)-hexanoyl)peroxide Aid to polymerisation Plastics, rubber, coatings, silicone 0,1     Maximum dosage = 0,2 % (w/w). 31 December 2031 1013   68928-76-7   dimethyltin dineodecanoate Polymer production aid Aid to polymerisation Plastics, rubber, coatings     (9) Plastics: maximum dosage = 0,12 % (w/w). Rubber, coatings: maximum dosage = 1 % (w/w). 31 December 2031 1014 231-765-0 7722-84-1   hydrogen peroxide Aid to polymerisation Plastics, rubber, coatings 0,1       31 December 2031 1015   80-15-9   cumene hydroperoxide Monomer or other reactant (crosslinker incorporated into polymer) Aid to polymerisation Plastics, rubber, coatings 0,1     Maximum dosage = 1 % (w/w). 31 December 2031 1016 236-050-7 13122-18-4   peroxy(3,5,5-trimethylhexanoic acid), tert -butyl ester Aid to polymerisation Plastics, rubber, coatings 0,1     Maximum dosage = 1 % (w/w). 31 December 2031 1017 246-619-1 25103-58-6   tert -dodecanethiol Polymer production aid Aid to polymerisation Plastics, rubber, coatings       Plastics: maximum dosage = 0,7 % (w/w). Rubber: maximum dosage = 1 % (w/w). 31 December 2031 1018 231-786-5 7727-54-0   ammonium persulfate Aid to polymerisation Plastics, rubber, coatings 0,1   For ammonium, refer to Annex V. Maximum dosage = 1 % (w/w). 31 December 2031 1019   7705-07-9   titanium trichloride Aid to polymerisation Plastics, rubber, coatings       Maximum dosage = 1 % (w/w). 31 December 2031 1020 203-650-5 109-13-7   tert -butyl peroxyisobutyrate Aid to polymerisation Plastics, rubber, coatings       Maximum dosage = 1 % (w/w). 31 December 2031 1021 203-710-0 109-83-1   2-methylaminoethanol Aid to polymerisation Plastics, rubber, coatings       Maximum dosage = 1 % (w/w). 31 December 2031 1022 203-874-3 111-48-8   thiodiglycol Aid to polymerisation Plastics, rubber, coatings       Maximum dosage = 1 % (w/w). 31 December 2031 1023   112-55-0   1-dodecanethiol Aid to polymerisation Plastics, rubber, coatings       Maximum dosage = 1 % (w/w). 31 December 2031 1024   114-83-0   acetophenylhydrazine Aid to polymerisation Plastics, rubber, coatings       Maximum dosage = 1 % (w/w). 31 December 2028 1025 204-469-4 121-44-8   triethylamine Aid to polymerisation Plastics, rubber, coatings 0,1       31 December 2031 1026 204-709-8 124-68-5   2-amino-2-methylpropanol Polymer production aid Plastics, rubber, coatings         31 December 2031 1027 236-740-8 13472-08-7   2,2'-azobis[2-methylbutyronitrile] Aid to polymerisation Plastics, rubber, coatings       Maximum dosage = 1 % (w/w). 31 December 2031 1028   13476-99-8   vanadium tris acetyl acetonate Aid to polymerisation Plastics, rubber, coatings       Maximum dosage = 1 % (w/w). 31 December 2031 1029   14666-78-5   diethylperoxydicarbonate Aid to polymerisation Plastics, rubber, coatings       Maximum dosage = 1 % (w/w). 31 December 2031 1030 205-769-8 150-76-5   4-methoxyphenol Aid to polymerisation Plastics, rubber, coatings       Maximum dosage = 1 % (w/w). 31 December 2031 1031   16066-38-9   di- n -propyl peroxydicarbonate Aid to polymerisation Plastics, rubber, coatings       Maximum dosage = 1 % (w/w). 31 December 2031 1032 240-344-0 16215-49-9   dibutyl peroxydicarbonate Aid to polymerisation Plastics, rubber, coatings       Maximum dosage = 1 % (w/w). 31 December 2031 1033 218-880-1 2273-43-0   butylhydroxyoxostannane Aid to polymerisation Plastics, rubber, coatings       Maximum dosage = 1 % (w/w). 31 December 2031 1034   22743-71-1   1,1-bis(t-hexyperoxy)cyclohexane Aid to polymerisation Plastics, rubber, coatings       Maximum dosage = 1 % (w/w). 31 December 2028 1035 252-091-3 34562-31-7   3,5-diethyl–1,2-dihydro-1-phenyl-2-propylpyridine Aid to polymerisation Plastics, rubber, coatings       Maximum dosage = 1 % (w/w). 31 December 2031 1036 224-305-5 4297-95-4   sodium phenylphosphinate Aid to polymerisation Plastics, rubber, coatings       Maximum dosage = 1 % (w/w). 31 December 2031 1037 226-218-8 5329-14-6   sulfamidic acid Aid to polymerisation Plastics, rubber, coatings       Maximum dosage = 1 % (w/w). 31 December 2031 1038 208-778-5 541-41-3   ethyl chloroformate Aid to polymerisation Plastics, rubber, coatings       Maximum dosage = 1 % (w/w). 31 December 2031 1039 210-036-0 603-35-0   triphenylphosphine Aid to polymerisation Plastics, rubber, coatings       Maximum dosage = 1 % (w/w). 31 December 2031 1040 270-877-4 68479-98-1   diethylmethylbenzenediamine Aid to polymerisation Plastics, rubber, coatings       Maximum dosage = 1 % (w/w). 31 December 2031 1041 200-915-7 75-91-2   tert -butyl hydroperoxide Aid to polymerisation Plastics, rubber, coatings       Maximum dosage = 1 % (w/w). 31 December 2028 1042 231-780-2 7727-18-6   vanadium trichloride oxide Aid to polymerisation Plastics, rubber, coatings       Maximum dosage = 1 % (w/w). 31 December 2031 1043 201-321-0 81-07-2   1,2-benzisothiazol-3(2 H )-one 1,1-dioxide Aid to polymerisation Plastics, rubber, coatings       Maximum dosage = 1 % (w/w). 31 December 2031 1044 212-791-1 870-08-6   dioctyltin oxide Aid to polymerisation Plastics, rubber, coatings       Maximum dosage = 1 % (w/w). 31 December 2031 1045   92-84-2   phenothiazine Aid to polymerisation Plastics, rubber, coatings       Maximum dosage = 1 % (w/w). 31 December 2031 1046 202-443-7 95-71-6   2-methylhydroquinone Aid to polymerisation Plastics, rubber, coatings       Maximum dosage = 1 % (w/w). 31 December 2031 1047 202-805-4 99-97-8   N , N -dimethyl- p -toluidine Aid to polymerisation Plastics, rubber, coatings       Maximum dosage = 1 % (w/w). 31 December 2031 1048   111-70-6   1-heptanol Monomer or other reactant Coatings         31 December 2031 1049   112-53-8   1-dodecanol Monomer or other reactant Coatings         31 December 2031 1050   8002-11-7   poppy-seed oil Monomer or other reactant Coatings         31 December 2028 1051   8024-09-7   walnut oil Monomer or other reactant Coatings         31 December 2028 1052   109-52-4   valeric acid Monomer or other reactant Coatings         31 December 2031 1053   111-27-3   1-hexanol Monomer or other reactant Coatings         31 December 2031 1054   112-72-1   1-tetradecanol Monomer or other reactant Coatings         31 December 2031 1055   112-92-5   1-octadecanol Monomer or other reactant Coatings         31 December 2031 1056   163149-29-9   poly-alpha-olefin from 1-dodecene and 1-octene Monomer or other reactant (base oil) Lubricants       Average molecular weight not less than 440 Da. Viscosity at 100 °C not less than 3.8 cSt (3.8 × 10 -6 m 2 /s). Polymerisation production aids and additives less than 0,02 % (w/w) in polymer. 31 December 2037 1057   219756-63-5   sodium-alpha-C 11 -alcohol-heptaglycol ether-omega-sulfate Aid to polymerisation Coatings 250       31 December 2028 1058   25038-74-8   polylaurolactam Polymer production aid Additive Lubricants 250 - for laurolactam     Oligomers with MW < 1 000 Da maximum 2 %. 31 December 2037 1059   68071-15-8   butandiololeate, ethoxylated Other (processing aid) Rubbers 2,5       31 December 2034 1060   68132-21-8   perilla oil Monomer or other reactant Coatings         31 December 2028 1061   68439-49-6   polyethylene glycol (EO=2-6) monoalkyl(C 16 -C 18 )ether Additive Aid to polymerisation Plastics, rubber, coatings 2,5       31 December 2028 1062   69011-36-5   isotridecanol, ethoxylated Additive Polymer production aid Coatings 90     Maximum residue of 0,2 mg ethylene oxide per kg polymer. 31 December 2031 1063   8001-21-6   sunflower oil Monomer or other reactant Coatings         31 December 2028 1064   8001-23-8   safflower oil Monomer or other reactant Coatings         31 December 2028 1065   8001-26-1   linseed oil Monomer or other reactant Additive Rubber, coatings       In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1066   8001-29-4   cotton seed oil Monomer or other reactant Coatings         31 December 2028 1067   8001-30-7   corn oil Monomer or other reactant Coatings         31 December 2028 1068   8001-31-8   coconut oil Monomer or other reactant Coatings         31 December 2028 1069   8001-78-3   castor oil, hydrogenated Monomer or other reactant Additive Polymer production aid Coatings         31 December 2031 1070   8002-26-4   tall oil Monomer or other reactant Coatings         31 December 2031 1071   8008-74-0   sesame oil Monomer or other reactant Coatings         31 December 2028 1072   8015-74-5   beechnut oil Monomer or other reactant Coatings         31 December 2028 1073   8016-13-5   fish oil Monomer or other reactant Coatings         31 December 2028 1074   8016-24-8   hempseed oil Monomer or other reactant Coatings         31 December 2028 1075   8016-49-7   pumpkin seed oil Monomer or other reactant Coatings         31 December 2028 1076   89-05-4   pyromellitic acid Monomer or other reactant Coatings 2,5 – expressed as the sum of pyromellitic acid and pyromellitc anhydride       31 December 2031 1077   9003-17-2   polybutadiene Additive Plastics, rubber       MW > 1 000 Da. 31 December 2037 1078   9003-31-0   polyisoprene Additive Rubber       MW > 1 000 Da. 31 December 2037 1079   9004-96-0   poly (ethylene glycol) monooleate Additive Coatings       Restriction is covered via the parameter TOC < 0,5 mg/l. 31 December 2028 1080       1,1,3-tris-(2-methyl-4-di-tridecylphosphite-5- tert -butyl-phenyl)-butane with added diphenylphosphite Additive Plastics   For the MTC tap values of degradation products, refer to Table 4.   For polyethylene and polypropylene, maximum residual content in the final material (QM) = 5 000 mg/kg. 31 December 2028 1081   504-60-9   1,3-pentadiene Monomer or other reactant Rubber         31 December 2031 1082   513-85-9   2,3-butanediol Monomer or other reactant Rubber         31 December 2031 1083       1,4-dihydro–2,6-dimethyl–3,5-dicarbododecyloxy-pyridine Additive Plastics       For PVC and its copolymers, maximum residual content in the final material (QM) = 3 000 mg/kg. 31 December 2028 1084       1-hydropentafluoro propene Monomer or other reactant Rubber     (38)   31 December 2028 1085       2- tert -butyl-4-hydroxyanisole Additive Rubber         31 December 2031 1086       3-tert-butyl-4-hydroxyanisole Additive Rubber         31 December 2028 1087       2,4-diphenylmethane-diisocyanate Monomer or other reactant Rubber 5,0 - expressed as primary aromatic amines   (16) Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 1088       2,6-diphenylmethane-diisocyanate Monomer or other reactant Rubber 5,0 - expressed as primary aromatic amines   (16) Maximum residual content in the final material (QM) = 1 mg/kg in product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2028 1089 213-593-8 992-55-2   4,4'-[[6-(octylthio)-1,3,5-triazine–2,4-diyl]bis(oxy)]bis[2,6-di- tert -butylphenol] Additive Plastics, rubber         31 December 2028 1090 202-918-9 101-14-4   3,3'-dichloro–4,4'-diamino-diphenylmethane Monomer or other reactant Rubber 5,0 - expressed as primary aromatic amines       31 December 2028 1091 212-677-1 843-55-0   4,4'-dioxydiphenyl–1,1'-cyclohexane Monomer or other reactant Plastics         31 December 2028 1092 204-279-1 118-82-1   4,4'-methylene-bis-(2,6-di- tert -butylphenol) Additive Plastics   For the MTC tap values of degradation products, refer to Table 4.     31 December 2031 1093 204-124-8 116-09-6   1-hydroxypropan-2-one Additive Rubber         31 December 2031 1094 205-617-0 144-15-0   acetyl-tri-2-ethylhexyl-citrate Additive Plastics 150       31 December 2031 1095 201-066-5 77-89-4   acetyl-triethyl-citrate Additive Plastics         31 December 2031 1096 203-470-7 107-18-6   allyl alcohol Monomer or other reactant Plastics, rubber         31 December 2031 1097 211-546-6 661-19-8   behenic alcohol Additive Plastics         31 December 2028 1098 - 217-576-6 21112-45-8 1892-29-1   beta-amino crotonic acid ester with 2,2'-hydroxy diethylenesulfide Additive Plastics       For rigid PVC and its copolymers with predominantly PVC content, maximum residual content in the final material (QM) = 20 000 mg/kg in total. 31 December 2028 1099       bis-2- tert -butyl-6-(3- tert -butyl-5-methyl-2-hydroxybenzylphenyl) terephthalate Additive Plastics     (27) For polyethylene, maximum residual content in the final material (QM) = 150 mg/kg. For polypropylene, maximum residual content in the final material (QM) = 1 000 mg/kg. For polystyrene, maximum residual content in the final material (QM) = 500 mg/kg. 31 December 2028 1100 201-624-8 85-70-1   butyl phthalyl butyl glycolate Additive Plastics         31 December 2028 1101 201-784-9 87-92-3   butyl tartrate Additive Plastics         31 December 2028 1102 269-637-1 68308-22-5   calcium montanate Additive Plastics         31 December 2028 1103 221-941-5 3287-12-5   dicetyl thiodipropionate Additive Rubber     (14) Maximum residual content in the final material (QM) = 5 000 mg/kg. 31 December 2028 1104       cetylpyridinium chloride Additive Plastics       Maximum residual content in the final material (QM) = 4 000 mg/kg. 31 December 2031 1105       chlorinated paraffin Additive Plastics         31 December 2031 1106       chlorinated polyethylene Additive Plastics         31 December 2037 1107       chlorinated rubber Additive Rubber         31 December 2028 1108       chloroethylvinylacetate Monomer or other reactant Rubber         31 December 2028 1109 203-799-6 110-75-8   chloroethylvinylether Additive Rubber         31 December 2028 1110   68037-39-8   chlorosulfonated polyethylene Additive Rubber         31 December 2034 1111 215-607-8 1333-82-0   chromic anhydride Additive Plastics     For chromium, refer to Annex V. For use as an anchor for polytetrafluoroethylene on aluminium or glass. 31 December 2028 1112   491589-22-1   cis 1,2-cyclo-hexanedicarboxylic acid, calcium salt Additive Plastics 250       31 December 2028 1113   27253-31-2   cobalt neodecanoate Additive Plastics 2,5 - expressed as neodecanoic acid.   (46) For cobalt, refer to Annex V.   31 December 2031 1114       condensation product of cinnamic aldehyde and hexamethylenediamine Aid to polymerisation Rubber         31 December 2028 1115       condensation product of n -dodecyl alcohol with ethylene oxide Additive Plastics       For use as an antistatic agent for polyolefin resins, maximum residual content in the final material (QM) = 1 000 mg/kg. 31 December 2028 1116       condensation products of formaldehyde with melamine Additive Plastics     (15)   31 December 2028 1117       condensation products of formaldehyde with urea Monomer or other reactant Plastics     (15)   31 December 2028 1118       condensation products of sorbitol and/or ethylene oxide Additive Plastics       Provided that the product does not release ethylene glycol. 31 December 2028 1119       copolymer of methylmethacrylate with divinylbenzene Monomer or other reactant Plastics         31 December 2028 1120       copolymer of methylmethacrylate with styrene, divinylbenzene and 1,3-butylene glycol-dimethacrylate Monomer or other reactant Plastics         31 December 2028 1121       copolymer of methylmethacrylate-butadiene-styrene-divinylbenzene Monomer or other reactant Plastics         31 December 2028 1122   54453-03-1   copper ethylenediaminetetraacetate Additive Plastics   EDTA MTC tap = 60 μg/l. For copper, refer to Annex V.   31 December 2028 1123 630-372-5 73728-37-7   cyclised rubber Additive Rubber         31 December 2028 1124 203-630-6 108-93-0   cyclohexylalcohol Additive Polymer production aid Rubber         31 December 2031 1125 226-733-8 5459-93-8   cyclohexylethylamine Monomer or other reactant Rubber         31 December 2031 1126 - 29965-97-7   cyclooctadiene Monomer or other reactant Rubber         31 December 2028 1127       cyclopentadiene Monomer or other reactant Rubber         31 December 2031 1128 248-523-5 27554-26-3   di isooctyl phthalate Additive Plastics       Maximum residual content of the sum of all phthalates in the final material (QM) = 50 000 mg/kg. 31 December 2028 1129 236-445-4 13372-18-4   dicetyl phthalate Additive Plastics 75     For rigid PVC, maximum residual content of the sum of all phthalates in the final material (QM) = 50 000 mg/kg. 31 December 2028 1130 237-971-7 14117-96-5   distearyl phthalate Additive Plastics 75     For rigid PVC, maximum residual content of the sum of all phthalates in the final material (QM) = 50 000 mg/kg. 31 December 2028 1131       diethoxydihydroquinone Monomer or other reactant Rubber 50 Phenols MTC tap = 50 μg/l.     31 December 2028 1132       diethylphthalate Additive Plastics, rubber       Maximum residual content of the sum of all phthalates in the final material (QM) = 50 000 mg/kg. 31 December 2031 1133 205-450-3 141-04-8   diisobutyladipate Additive Plastics, rubber 150       31 December 2031 1134 247-977-1 26761-40-0   diisodecylphthalate Additive Plastics, rubber       Maximum residual content of the sum of all phthalates in the final material (QM) = 50 000 mg/kg. 31 December 2028 1135 204-212-6 117-82-8   dimethoxyethylphthalate Additive Plastics       Maximum residual content of the sum of all phthalates in the final material (QM) = 50 000 mg/kg. 31 December 2028 1136       dimethyl ester of polycondensed succinic acid with 2-(4-hydroxy-2,2,6,6-tetramethyl-1-piperidyl)-ethanol Additive Plastics       For polyethylene, maximum residual content of the sum of all phthalates in the final material (QM) = 3 000 mg/kg. For polypropylene, maximum residual content of the sum of all phthalates in the final material (QM) = 5 000 mg/kg. 31 December 2028 1137 248-765-1 27987-25-3   dimethylcyclohexylphthalate Additive Plastics       Maximum residual content of the sum of all phthalates in the final material (QM) = 50 000 mg/kg. 31 December 2031 1138       dimethylphenylthiuram Aid to polymerisation Rubber     (42)   31 December 2028 1139 203-664-1 109-31-9   di- n -hexylazelate Additive Plastics         31 December 2028 1140 202-577-6 97-39-2   di- o -tolylguanidine Monomer or other reactant Rubber         31 December 2031 1141       disproportionated rosin Additive Polymer production aid Rubber         31 December 2031 1142       distearyl-(4-hydroxy-3-methyl-5- tert -butyl)-benzyl-malonate Additive Plastics       Maximum residual content in the final material (QM) = 5 000 mg/kg. 31 December 2028 1143 201-555-3 84-72-0   ethyl phthalyl ethyl glycolate Additive Plastics         31 December 2031 1144   106-90-1   acrylic acid, 2,3-epoxypropyl ester Additive Rubber     (21) In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1145       high, medium and low density polyethylene Monomer or other reactant Plastics         31 December 2028 1146       hydrogenated polycyclopentadiene resin Monomer or other reactant Plastics         31 December 2028 1147       isodecyl alcohol Additive Polymer production aid Plastics, rubber         31 December 2028 1148       lauryldithiopropionate Additive Rubber         31 December 2028 1149   12068-40-5   lithium aluminium silicate (2:1:1) Additive Plastics     For aluminium and lithium, refer to Annex V. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 1150       melamine resins modified with butyl alcohol Monomer or other reactant Rubber       For paints and varnishes. 31 December 2028 1151   694-91-7   5-methylene-2-norbornene Monomer or other reactant Rubber         31 December 2028 1152 639-976-3 68441-63-4   methylhydroxyethylcellulose Additive Plastics         31 December 2028 1153 - 51064-12-1   methylpentadiene Monomer or other reactant Rubber         31 December 2028 1154       n -decyl n -octyl phthalate Additive Plastics     (25) (27)   31 December 2028 1155       di- n -decyl phthalate Additive Plastics     (25) (27)   31 December 2031 1156       Triethanolamine monolaurate Additive Plastics       Use as an antistatic for polyolefins, maximum residual content in the final material (QM) = 3 000 mg/kg. 31 December 2028 1157 200-820-0 74-89-5   Monomethylamine Additive Plastics 2,5     Used with dimethyl carbonate in the manufacture of modified polymethacrylate. 31 December 2031 1158 260-982-3 57843-53-5   N , N , N ', N '-tetrakis (2-hydroxypropyl)-adipamide Monomer or other reactant Additive Polymer production aid Aid to polymerisation Rubber       For the production of polymer dispersions of polyolefins functionalised with acrylic and/or anhydride groups, used as coatings on metals, at a use rate of ≤ 6 % by dry weight of the dispersion. 31 December 2031 1159       N -octadecyl-beta (4'-hydroxy-3,5-di- tert -butylenyl)-propionate Additive Rubber         31 December 2028 1160 230-451-0 7144-65-2   ortho-diphenylglycidyl ether Additive Plastics       For films of vinyl chloride-vinylidene chloride copolymers, maximum residual content in the final material (QM) = 3 000 mg/kg. 31 December 2028 1161 241-313-4 17281-74-2   palmitoyl benzoyl methane Additive Plastics       For rigid PVC and its copolymers, maximum residual content in the final material (QM) = 5 000 mg/kg. 31 December 2028 1162 204-259-2 118-55-8   phenyl salicylate Additive Plastics         31 December 2031 1163   70750-58-2   polybetapinene Additive Rubber         31 December 2034 1164       polybutylene terephthalate Additive Polymer production aid Plastics         31 December 2037 1165       polychlorotrifluoroethylene Monomer or other reactant Plastics     (38)   31 December 2028 1166       polyester derived from the condensation of adipic acid and ethylene glycol Monomer or other reactant Plastics     (2)   31 December 2028 1167 607-461-2 24938-37-2   polyethylene adipate Additive Plastics         31 December 2034 1168   9004-99-3   polyethylene glycol monostearate Additive Plastics     (2) Provided that the product does not release mono- and diethylene glycols. 31 December 2037 1169       polyethylene glycol terephthalate Monomer or other reactant Plastics     (2)   31 December 2028 1170   36221-42-8   polypropylene adipate Additive Plastics         31 December 2028 1171   9003-20-7   polyvinyl acetate Monomer or other reactant Plastics, coatings         31 December 2037 1172       polyvinyl butyral Monomer or other reactant Plastics, coatings         31 December 2028 1173       polyvinyl chloride Monomer or other reactant Plastics         31 December 2037 1174       polyvinyl ethyl ether Additive Plastics, adhesives, coatings       Viscosity 0,5-0,8 cP at 1 % in benzene at 20 °C. 31 December 2028 1175   9003-44-5   polyvinyl isobutyl ether Monomer or other reactant Plastics         31 December 2028 1176       polyvinyl tert -butyl ether Monomer or other reactant Plastics         31 December 2028 1177   9002-85-1   polyvinylidene chloride Monomer or other reactant Plastics         31 December 2037 1178       potassium salt of maleic acid semiesterified with cetyl alcohol Additive Plastics         31 December 2028 1179       Reaction product of 4-methylphenol with dicyclopentadiene and subsequent alkylation with isobutyl Additive Rubber 1500       31 December 2028 1180       Reaction product of N -phenyl- N '-(1-3-dimethylbutyl)p-phenylenediamine and tert -C 10 -C 13 glycidyl thioether with predominantly C 12 content Additive Rubber 1,0 - expressed as primary aromatic amines     Maximum dosage = 2,4 % (w/w). Only for contact times ≤ 10 min and temperatures ≤ 40 °C. Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 1181 268-213-3 68037-49-0   sodium alkyl (C 10 -C 18 ) sulfonate Additive Plastics       Use as an antistatic agent in PVC, maximum residual content in the final material (QM) = 15 000 mg/kg. Use as an antistatic agent in polystyrene, maximum residual content in the final material (QM) = 25 000 mg/kg. Use as an emulsifying agent in PVC and its copolymers, maximum residual content in the final material (QM) = 20 000 mg/kg. Use as an emulsifying agent in polystyrene, maximum residual content in the final material (QM) = 50 000 mg/kg. 31 December 2028 1182 209-406-4 577-11-7   sodium dioctylsulfosuccinate Additive Plastics       For polyethylene, maximum residual content in the final material (QM) = 10 000 mg/kg. 31 December 2031 1183       sodium dodecylbenzenesulfonate Additive Plastics       In the case of gaskets and mastics, maximum residual content in the final material (QM) = 20 000 mg/kg. 31 December 2031 1184   29704-46-9   sodium sulforicinate Additive Plastics         31 December 2028 1185 205-481-2 205-777-1 141-33-3 150-88-9   sodium butylxanthogenate Monomer or other reactant Rubber     (47)   31 December 2028 1186       zinc butylxanthogenate Monomer or other reactant Rubber     (47) For zinc, refer to Annex V. In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1187 205-440-9 140-90-9   sodium ethylxanthogenate Monomer or other reactant Rubber     (47)   31 December 2031 1188       zinc ethylxanthogenate Monomer or other reactant Rubber     (47) For zinc, refer to Annex V.   31 December 2028 1189       sodium isopropylxanthogenate Monomer or other reactant Rubber     (47)   31 December 2028 1190       zinc isopropylxanthogenate Monomer or other reactant Rubber     (47) For zinc, refer to Annex V.   31 December 2028 1191       sodium methylxanthogenate Monomer or other reactant Rubber     (47)   31 December 2028 1192       zinc methylxanthogenate Monomer or other reactant Rubber     (47) For zinc, refer to Annex V.   31 December 2028 1193       sodium pentamethylenxanthogenate Monomer or other reactant Rubber     (47)   31 December 2028 1194       zinc pentamethylenxanthogenate Monomer or other reactant Rubber     (47) For zinc, refer to Annex V.   31 December 2028 1195       sodium dibutyldithiocarbamate Aid to polymerisation Rubber     (42)   31 December 2031 1196       zinc dibutyldithiocarbamate Aid to polymerisation Rubber     (42) For zinc, refer to Annex V.   31 December 2028 1197       copper dibutyldithiocarbamate Aid to polymerisation Rubber     (42) For copper, refer to Annex V.   31 December 2028 1198       sodium diethyldithiocarbamate Aid to polymerisation Rubber     (42)   31 December 2031 1199   13681-87-3   copper diethyldithiocarbamate Aid to polymerisation Rubber     (42) For copper, refer to Annex V.   31 December 2028 1200       sodium dimethyldithiocarbamate Aid to polymerisation Rubber     (42)   31 December 2031 1201   137-29-1   copper dimethyldithiocarbamate Aid to polymerisation Rubber     (42) For copper, refer to Annex V.   31 December 2031 1202       sodium ethylphenyldithiocarbamate Aid to polymerisation Rubber     (42)   31 December 2028 1203 238-677-1 14634-93-6   zinc ethylphenyldithiocarbamate Aid to polymerisation Rubber     (42) For zinc, refer to Annex V.   31 December 2031 1204       copper ethylphenyldithiocarbamate Aid to polymerisation Rubber     (42) For copper, refer to Annex V.   31 December 2028 1205   13878-54-1   zinc pentamethylenedithiocarbamate Aid to polymerisation Rubber     (42) For zinc, refer to Annex V.   31 December 2028 1206       copper pentamethylenedithiocarbamate Aid to polymerisation Rubber     (42) For copper, refer to Annex V.   31 December 2028 1207 232-360-1 8007-43-0   sorbitan sesquioleate Additive Plastics         31 December 2031 1208 229-781-8 6729-96-0   stearyl dithiopropionate Additive Rubber         31 December 2028 1209       stearyl-(3,5-dimethyl-4-hydroxy-benzyl)thioglycolate Additive Plastics       Maximum residual content in the final material (QM) = 5 000 mg/kg. 31 December 2028 1210 202-387-3 95-05-6   tetraethylthiuram monosulfide Monomer or other reactant Aid to polymerisation Rubber     (42)   31 December 2028 1211 203-841-3 111-17-1   thiodipropionic acid Additive Rubber     (14)   31 December 2031 1212       triacetin Additive Plastics         31 December 2031 1213 201-071-2 77-94-1   tributylcitrate Additive Plastics         31 December 2031 1214       tris-(2,4-di- tert -butyl phenyl) diphosphite Additive Rubber   For the MTC tap values of degradation products, refer to Table 4.     31 December 2028 1215   1184-84-5   vinylsulfonic acid Monomer or other reactant Rubber         31 December 2028 1216       vinylsulfonic amide Monomer or other reactant Rubber         31 December 2028 1217 232-723-4 9010-69-9   zinc resinate Additive Plastics     For zinc, refer to Annex V.   31 December 2028 1218   78-67-1   2,2'-azobis(isobutyronitrile) Aid to polymerisation Plastics       Maximum dosage = 0,2 % (w/w). 31 December 2031 1219   2372-21-6   tert -butylperoxy isopropyl carbonate Polymer production aid Aid to polymerisation Plastics 0,1     Maximum dosage = 0,5 % (w/w). 31 December 2031 1220   111-92-2   di- n -butylamine Aid to polymerisation Plastics, rubber 1,0       31 December 2031 1221   113693-69-9   tetramethyl-bis(4-hydroxyphenyl)methane (TMBPF), reaction product with epichlorohydrin (= TMBPF-diglycidyl ether or TMBPF-DGE) Monomer or other reactant Coatings   Epichlorohydrin MTC tap = 0.1 μg/l. (48) (49)   31 December 2028 1222   3844-45-9   C.I. Food Blue 2 ( or: triarylmethane; C.I. No 42090) Additive All       Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1223   1934-21-0   C.I. Food Yellow 4 ( or: tartrazine (E102); C.I. No 19140) Additive All       Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1224   12227-89-3; 1317-61-9   C.I. Pigment Black 11 ( or: iron oxide black; C.I. No 77499) Additive All     For iron, refer to Annex V.   31 December 2028 1225   68186-91-4   C.I. Pigment Black 28 ( or: copper chromite; C.I. No 77428) Additive All     For chromium and copper, refer to Annex V.   31 December 2031 1226   12062-81-6   C.I. Pigment Black 33, ( or: iron manganese trioxide; C.I. No 77537) Additive All     For iron and manganese, refer to Annex V.   31 December 2031 1227   147-14-8   C.I. Pigment Blue 15 ( or: phthalocyanine blue (incl. 15:1, 15:2, 15:3, 15:4); C.I. No. 74160) Additive All     For copper, refer to Annex V. Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1228   1345-16-0   C.I. Pigment Blue 28 ( or: cobalt aluminate; C.I. No. 77346) Additive All     For aluminium and cobalt, refer to Annex V.   31 December 2031 1229   57455-37-5   C.I. Pigment Blue 29 ( or: ultramarine blue; C.I. No. 77007) Additive All     For aluminium, refer to Annex V.   31 December 2028 1230   68187-11-1   C.I. Pigment Blue 36 ( or: cobalt chromite; C.I. No. 77343) Additive All     For aluminium, chromium and cobalt, refer to Annex V.   31 December 2031 1231   68412-74-8   C.I. Pigment Blue 74 ( or: cobalt zinc silicate; C.I. No. 77366) Additive All     For cobalt and zinc, refer to Annex V.   31 December 2031 1232   12068-86-9   C.I. Pigment Brown 11 ( or : magnesium ferrite; C.I. No. 77495) Additive All     For iron, refer to Annex V.   31 December 2031 1233   68186-90-3   C.I. Pigment Brown 24 ( or : chromium antimony titanate; C.I. No. 77310) Additive All     For antimony and chromium, refer to Annex V.   31 December 2031 1234   12737-27-8   C.I. Pigment Brown 29 ( or : chromium iron oxide; C.I. No. 77500) Additive All     For chromium and iron, refer to Annex V.   31 December 2031 1235   1308-38-9   C.I. Pigment Green 17 ( or : chromium(III)oxide; C.I. No. 77288) Additive All     For chromium, refer to Annex V.   31 December 2031 1236   1328-53-6   C.I. Pigment Green 7 ( or : phthalocyanine green; C.I. No. 74260) Additive All     For copper, refer to Annex V. Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1237   3520-72-7   C.I. Pigment Orange 13 ( or : diazo ; C.I. No. 21110) Additive All       Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1238   1309-37-1   C.I. Pigment Red 101 ( or : iron(III)oxide; C.I. No. 77491) Additive All         31 December 2031 1239   12656-85-8   C.I. Pigment Red 104 ( or : lead chromate/molybdate/sulfate; C.I. No. 77605) Additive All         31 December 2028 1240   3049-71-6   C.I. Pigment Red 178 ( or : perylene red) Additive All       Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1241   40618-31-3 82643-43-4   C.I. Pigment Red 214 ( or : condensation azo) Additive All       Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1242   52238-92-3   C.I. Pigment Red 242 ( or : disazo condensation; C.I. No. 20067) Additive All     (38) Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 1243   43035-18-3   C.I. Pigment Red 247 ( or : monoazo; C.I. No. 15915) Additive All       Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1244   6358-87-8   C.I. Pigment Red 38 ( or: diazo; C.I. No. 21120) Additive All       Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1245   5281-04-9   C.I. Pigment Red 57:1 (D & C Red 7) ( or: monoazo; C.I. No. 15850:1) Additive All       Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1246   12769-96-9   C.I. Pigment Violet 15 ( or : ultramarine violet; C.I. No. 77007) Additive All         31 December 2028 1247   6358-30-1   C.I. Pigment Violet 23 ( or : oxazine; C.I. No. 51319) Additive All       Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 1248   1345-05-7   C.I. Pigment White 5 ( or : lithopone (coprecipitate of barium sulfate and zinc sulfide) ; C.I. No. 77115 Additive All         31 December 2028 1249   5590-18-1   C.I. Pigment Yellow 110 ( or : aminoketone; C.I. No. 56280) Additive All       Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1250 269-103-8 68187-51-9   C.I. Pigment Yellow 119 ( or : zinc ferrite; C.I. No. 77496) Additive All         31 December 2031 1251 603-331-4 129423-54-7   C.I. Pigment Yellow 191 ( or: monoazo; C.I. No. 18795) Additive All       Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1252 232-353-3 8007-18-9   C.I. Pigment Yellow 53 ( or : nickel antimony titanate; C.I. No. 77788) Additive All         31 December 2031 1253   6528-34-3   C.I. Pigment Yellow 65 ( or: monoazo; C.I. No. 11740) Additive All       Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1254   8005-02-5   C.I. Solvent Black 7 ( or: azine; C.I. No. 50415:1) Additive All       Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 1255 201-353-5 81-48-1   C.I. Solvent Violet 13 ( or: anthraquinone; C.I. No. 60725) Additive All       Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1256   109-58-0   (2-aminoethyl)carbamic acid Aid to polymerisation Rubber       Only to be used in elastomers having vinylidene fluoride as a monomer. Maximum residual content in the final material (QM) = 30 g/kg. 31 December 2028 1257   36-86-8   1,1-bis( tert -butylperoxy)cyclohexane Aid to polymerisation Rubber 0,1       31 December 2031 1258   95-35-2   1,3-bis(2-benzothiazolylmercaptomethyl) urea Aid to polymerisation Rubber       In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1259   2212-81-9   1,3-bis( tert -butylperoxyisopropyl)benzene Aid to polymerisation Rubber 0,1     In rubbers, not for use in products in contact with warm and hot water. 31 December 2031 1260   105-55-5   1,3-diethylthiourea Aid to polymerisation Rubber       In rubbers, not for use in products in contact with warm and hot water. 31 December 2031 1261   7691-02-3   1,3-divinyltetramethyldisilazane Additive Rubber         31 December 2031 1262   102-78-3   2-(2,6-dimethylmorpholinothio) benzthiazole Aid to polymerisation Rubber     (43) In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1263   102-77-2   2-(morpholinothio)benzothiazole Aid to polymerisation Rubber 150   (43) Maximum residual content in the final material (QM) = 30 g/kg. 31 December 2031 1264   87-97-8   2,6-di- tert -butyl-4-(methoxymethyl)phenol Additive Rubber   For the MTC tap values of degradation products, refer to Table 4.   In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1265   2668-47-5   2,6-di- tert -butyl-4-phenylphenol Additive Rubber   For the MTC tap values of degradation products, refer to Table 4.   In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1266   95-30-7   2-benzothiazyl- N , N -diethylthiocarbamyl sulfide Aid to polymerisation Rubber     (43) In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1267   96-45-7   2-mercaptoimidazoline Aid to polymerisation Rubber 2,5     Maximum residual content in the final material (QM) = 30 g/kg. 31 December 2028 1268   26511-61-5   3,3-bis( tert -butylperoxy)butanoic acid, n -butyl ester Aid to polymerisation Rubber       In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1269   19262-37-4   4,4'-bis(aminocyclohexyl)methane carbamate Aid to polymerisation Rubber       In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1270   101-70-2   4,4'-dimethoxydiphenylamine Additive Rubber       In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1271   95-80-7   4-methyl- m -phenylenediamine Additive Rubber       In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1272   15570-10-2   4- tert -butyl-2-methylthiophenol Additive Rubber       In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1273   4545-30-6   4- tert -butylthiophenol, zinc salt Additive Rubber     For zinc, refer to Annex V. In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1274   140-04-5   acetylricinoleic acid, butyl ester Additive Rubber       In rubbers, not for use in products in contact with warm and hot water. 31 December 2031 1275   141-17-3   adipic acid, bis[2-(2-butoxyethoxy)-ethyl) ester Additive Rubber       In rubbers, not for use in products in contact with warm and hot water. 31 December 2031 1276   2451-84-5   adipic acid, dibenzyl ester Additive Rubber       In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1277   105-97-5   adipic acid, didecyl ester Additive Rubber       In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1278   27178-16-1   adipic acid, diisodecyl ester Additive Rubber       In rubbers, not for use in products in contact with warm and hot water. 31 December 2031 1279   1330-86-5   adipic acid, diisooctyl ester Additive Rubber         31 December 2031 1280   110-29-2   adipic acid, n -decyl n -octyl ester Additive Rubber       In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1281   123-77-3   azodicarbonamide Additive Rubber       In rubbers, not for use in products in contact with warm and hot water. 31 December 2031 1282 201-255-2 80-17-1   benzenesulfonohydrazide Additive Rubber       In rubbers, not for use in products in contact with warm and hot water. 31 December 2031 1283       bis(2-hydroxy-3- tert -octyl-5-methylphenyl)methane Additive Rubber       In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1284 246-709-0 25176-75-4   caproic acid, diester with triethyleneglycol Additive Rubber       In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1285 203-361-4 106-10-5   caprylic acid, diester with triethyleneglycol Additive Rubber       In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1286   61789-98-8   cork Additive Rubber       In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1287   3399-73-3   cyclohexylethylamine Aid to polymerisation Rubber       In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1288   149-82-6   dibutyldithiocarbamic acid, N , N -dimethylcyclohexylamine salt Aid to polymerisation Rubber       In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1289   109-89-7   diethylamine Aid to polymerisation Rubber       In rubbers, not for use in products in contact with warm and hot water. 31 December 2031 1290   502-55-6   diethylxanthogen disulfide Additive or polymer production aid Rubber     (47) In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1291   123-81-9   ethyleneglycol bis(mercaptoacetate) Aid to polymerisation Rubber       Maximum residual content in the final material (QM) = 30 g/kg. 31 December 2031 1292   36290-04-7   formaldehyde-2-naphthalenesulfonic acid, copolymer, sodium salt Additive Polymer production aid Rubber     (15) In rubbers, not for use in products in contact with warm and hot water. 31 December 2034 1293   93-35-4   formaldehyde-phenol, copolymer Additive Rubber     (15) The copolymer cannot contain additives that are not listed in the organics EU Positive List. 31 December 2028 1294   68476-37-9   glue, of animal origin Additive or polymer production aid Rubber       In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1295   16941-12-1   hexachloroplatinic acid Additive or polymer production aid Rubber         31 December 2031 1296   999-97-3   hexamethyldisilazane Additive or polymer production aid Rubber         31 December 2031 1297   143-06-6   hexamethylenediamine carbamate Aid to polymerisation Rubber       In rubbers, not for use in products in contact with warm and hot water. 31 December 2031 1298 213-680-0 1000-90-4   isopropylxanthogenate, zinc salt Aid to polymerisation Rubber     (47) For zinc, refer to Annex V. In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1299   106-18-3   lauric acid, butyl ester Additive Rubber         31 December 2028 1300   28693-00-7   monochloroacetic acid, ester with 5-(hydroxymethyl)-bicyclo[2.2.1]hept-2-ene Monomer or other reactant Rubber       In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1301       montan wax, consisting of: 1) montanic acids C 26 -C 32 , 2) esters thereof with ethyleneglycol and/or 1,3-butanediol 3) and/or calcium salts Additive Rubber         31 December 2028 1302   10591-84-1   N , N '-dimethyldiphenylthiuram disulfide Aid to polymerisation Rubber     (42) Maximum residual content in the final material (QM) = 30 g/kg. 31 December 2031 1303       N -alkyl(C 14 -C 18 )- N , N ’, N ’-triacetoyl-1,3-diaminopropane Additive Rubber       In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1304       N -phenyl- N ’-isohexyl- p -phenylenediamine Additive Rubber       In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1305   142-77-8   oleic acid, butyl ester Additive Rubber         31 December 2028 1306   7620-75-9   oleic acid, dibutylamine salt Aid to polymerisation Rubber       In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1307   1912-84-1   oleic acid, tin(II) salt Aid to polymerisation Rubber       In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1308   117-97-5   pentachlorothiophenol, zinc salt Additive or polymer production aid Rubber     For zinc, refer to Annex V. In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1309   98-77-1   pentamethylenedithiocarbamic acid, piperidine salt Aid to polymerisation Rubber       In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1310   136-04-9   pentamethylenedithiocarbamic acid, potassium salt Aid to polymerisation Rubber     (42) For zinc, refer to Annex V. Maximum residual content in the final material (QM) = 30 g/kg. 31 December 2028 1311   107-71-1   peracetic acid, tert -butyl ester Aid to polymerisation Rubber 0,1     In rubbers, not for use in products in contact with warm and hot water. 31 December 2031 1312   89-03-8   petrolatum Additive Rubber         31 December 2028 1313   117-84-0   phthalic acid, di- n -octyl ester Additive Rubber 300   (25) (27)   31 December 2028 1314   26762-92-5   p -menthane hydroperoxide Aid to polymerisation Rubber       In rubbers, not for use in products in contact with warm and hot water. 31 December 2031 1315       p -nonylphenyl phosphite, 2,2-bis(3- tert -butyl-4-hydroxyphenyl) propane ester Additive Rubber       In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1316   25101-03-5   polypropyleneglycol adipate Additive Rubber     (30)   31 December 2037 1317 232-299-0 8002-13-9   rapeseed oil Additive Rubber         31 December 2028 1318   27214-90-0   sebacic acid, diisooctyl ester Additive Rubber       In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1319   2432-87-3   sebacic acid, di- n -octyl ester Additive Rubber         31 December 2031 1320   1344-08-7   sodium polysulfide Additive or polymer production aid Rubber       In rubbers, not for use in products in contact with warm and hot water. 31 December 2031 1321       soybean oil, sulfur treated (factice) Additive Rubber 250       31 December 2028 1322   93-73-2   tetrabutylthiuram monosulfide Aid to polymerisation Rubber     (42) In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1323   7772-99-8   tin chloride Aid to polymerisation Rubber       In rubbers, not for use in products in contact with warm and hot water. 31 December 2031 1324   19484-26-5   tridecyl mercaptan Additive or polymer production aid Rubber       In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1325   117-56-8   triethanolamine phosphate Additive Rubber 500     Only to be used in mould release agents. 31 December 2028 Table 2 European positive lists of groups of starting substances for organic materials EUPL Number EC Number CAS Number FCM substance Number (A) Starting substance group name Technical function (B) Drinking water contact materials (C) Maximum Tolerable Concentration at the tap in organic materials (MTC tap, organics ) in μg/l Total Maximum Tolerable Concentration at the tap (MTC(T) tap, organics ) in μg/l (D) Conditions of use Expiry date Value for the starting substance Values for other relevant chemical species (E) 1326     3 alcohols, aliphatic, monohydric, saturated, linear, primary (C 4 -C 22 ) Monomer or other reactant All         31 December 2031 1327     4 mixture of (40 % w/w) 2,2,4- trimethylhexane–1,6-diisocyanate and (60 % w/w) 2,4,4-trimethylhexane–1,6-diisocyanate Monomer or other reactant All     (16) Maximum residual content in the final material (QM) = 1 mg/kg in final product expressed as isocyanate moiety. Verification of compliance by residual content per food contact surface area (QMA). 31 December 2034 1328     5 trialkyl(C 5 -C 15 ) acetic acid, 2,3- epoxypropyl ester Monomer or other reactant All 0,1     Maximum residual content in the final material (QM) = 1 mg/kg in the product expressed as epoxy group. Molecular weight of the epoxy group is 43 Da. 31 December 2031 1329     6 trialkyl acetic acid (C 7 -C 17 ), vinyl esters Monomer or other reactant All 2,5     Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. 31 December 2031 1330     8 acetylated mono- and diglycerides of fatty acids Additive or polymer production aid All     (31)   31 December 2031 1331     9 acids, C 2 -C 24, aliphatic, linear, monocarboxylic from natural oils and fats, and their mono-, di- and triglycerol esters (branched fatty acids at naturally occurring levels are included) Polymer production aid Other (processing aid) All         31 December 2031 1332     10 acids, C 2 -C 24 , aliphatic, linear, monocarboxylic, synthetic and their mono-, di- and triglycerol esters Polymer production aid Additive Other (processing aid) All         31 December 2031 1333     11 acids, aliphatic, monocarboxylic (C 6 -C 22 ), esters with polyglycerol Additive or polymer production aid All         31 December 2034 1334     12 acids, fatty, from animal or vegetable food fats and oils Additive or polymer production aid Other (processing aid) All         31 December 2031 1335     13 alcohols, aliphatic, monohydric, saturated, linear, primary (C 4 -C 24 ) Additive or polymer production aid All         31 December 2031 1336     14 n -alkyl(C 10 -C 13 )benzenesulfonic acid Additive Polymer production aid All 1500       31 December 2031 1337     15 alkyl, linear with even number of carbon atoms (C 12 -C 20 ) dimethylamines Additive or polymer production aid All 1500       31 December 2031 1338     16 alkyl(C 8 -C 22 )sulfonic acids Additive Polymer production aid All 300       31 December 2031 1339     17 alkyl(C 8 -C 22 )sulfuric acids, linear, primary with an even number of carbon atoms Additive or polymer production aid All         31 December 2031 1340     19 N , N -bis(2-hydroxyethyl)alkyl (C 8 -C 18 )amine Additive Polymer production aid All     (7)   31 December 2031 1341     20 N , N -bis(2-hydroxyethyl)alkyl (C 8 -C 18 )amine hydrochlorides Additive or polymer production aid All     (7)   31 December 2031 1342     22 castor oil, mono- and diglycerides Additive or polymer production aid All         31 December 2031 1343     23 chlorides of choline esters of coconut oil fatty acids Additive or polymer production aid All 45     Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. 31 December 2031 1344     25 cresols, butylated, styrenated Additive or polymer production aid All 600       31 December 2031 1345     26 5,7-di- tert -butyl-3-(3,4- and 2,3-dimethylphenyl)-3 H -benzofuran-2-one containing: a) 5,7-di- tert -butyl-3-(3,4-dimethylphenyl)-3 H -benzofuran-2-one (80 to 100 % w/ w) and b) 5,7-di- tert -butyl-3-(2,3-dimethylphenyl)-3 H -benzofuran-2-one (0 to 20 % w/w) Additive or polymer production aid All 250       31 December 2031 1346     27 9,10-dihydroxy stearic acid and its oligomers Additive or polymer production aid All 250       31 December 2028 1347     28 di- n -octyltin bis(n-alkyl(C 10 -C 16 ) mercaptoacetate) Additive or polymer production aid All     (10)   31 December 2031 1348     31 di- n -octyltin dimaleate, esterified Additive or polymer production aid All     (10)   31 December 2031 1349     38 glass fibres Additive All       Glass according to Annex IV. 31 December 2031 1350     40 glycerol, esters with acetic acid Additive or polymer production aid All         31 December 2031 1351     41 glycerol, esters with acids, aliphatic, saturated, linear, with an even number of carbon atoms (C 14 -C 18 ) and with acids, aliphatic, unsaturated, linear, with an even number of carbon atoms (C 16 -C 18 ) Additive or polymer production aid All         31 December 2031 1352     42 glycerol, esters with butyric acid Additive or polymer production aid All         31 December 2031 1353     43 glycerol, esters with erucic acid Additive or polymer production aid All         31 December 2031 1354     44 glycerol, esters with 12-hydroxystearic acid Additive or polymer production aid All         31 December 2031 1355     45 glycerol, esters with lauric acid Additive or polymer production aid All         31 December 2031 1356     46 glycerol, esters with linoleic acid Additive or polymer production aid All         31 December 2031 1357     47 glycerol, esters with myristic acid Additive or polymer production aid All         31 December 2031 1358     48 glycerol, esters with nonanoic acid Additive or polymer production aid All         31 December 2031 1359     49 glycerol, esters with oleic acid Polymer production aid Other (processing aid) All         31 December 2031 1360     50 glycerol, esters with palmitic acid Additive or polymer production aid All         31 December 2031 1361     51 glycerol, esters with propionic acid Additive or polymer production aid All         31 December 2031 1362     52 glycerol, esters with ricinoleic acid Additive or polymer production aid All         31 December 2031 1363     53 glycerol, esters with stearic acid Additive or polymer production aid All         31 December 2031 1364     65 mixture of 4-(2-benzoxazolyl)-4′-(5-methyl-2-benzoxazolyl)stilbene, 4,4′-bis(2-benzoxazolyl) stilbene and 4,4′-bis(5-methyl-2-benz oxazolyl)stilbene Additive All       Not more than 0,05 % (w/w) (quantity of substance used/ quantity of the formulation). Mixture obtained from the manufacturing process in the typical ratio of (58-62 %):(23-27 %): (13-17 %). 31 December 2031 1365     66 mono- n -octyltin tris(alkyl (C 10 -C 16 ) mercaptoacetate) Additive or polymer production aid All     (11)   31 December 2031 1366     67 montanic acids and/or their esters with ethyleneglycol and/or with 1,3-butanediol and/or with glycerol Polymer production aid Other (processing aid) All         31 December 2031 1367     68 phosphoric acid, mono- and di- n -alkyl (C 16 and C 18 ) esters Additive or polymer production aid All 2,5       31 December 2031 1368     69 phosphorous acid, tris(nonyl-and/ or dinonylphenyl) ester Additive All 1500     In the absence of plasticiser, maximum residual content in the final material (QM) = 3 000 mg/kg. For butadiene-styrene copolymer, maximum residual content in the final material (QM) = 15 000 mg/kg. 31 December 2028 1369     73 polyesters of 1,2-propanediol and/ or 1,3- and/or 1,4-butanediol and/ or polypropyleneglycol with adipic acid, which may be end-capped with acetic acid or fatty acids C 12 -C 18 or n-octanol and/or n-decanol Additive or polymer production aid All     (30) (31)   31 December 2034 1370     78 polyethyleneglycol (EO = 1-50) monoalkylether (linear and branched, C 8 -C 20 ) sulfate, salts Additive or polymer production aid All 250       31 December 2034 1371     80 powders, flakes and fibres of brass, bronze, copper, stainless steel, tin, iron and alloys of copper, tin and iron Additive All     For relevant elements, refer to Annex V.   31 December 2031 1372     89 stearic acid, esters with ethyleneglycol Additive or polymer production aid All     (2)   31 December 2031 1373   50-21-5 99 lactic acid Monomer or other reactant Polymer production aid Other (processing aid) All         31 December 2034 1374   50-99-7 102 glucose Monomer or other reactant All         31 December 2037 1375   57-55-6 109 1,2-propanediol Monomer or other reactant Additive Polymer production aid All         31 December 2034 1376   59-02-9 10191-41-0 110 α-tocopherol Polymer production aid Other (processing aid) All         31 December 2034 1377   75-56-9 135 propylene oxide Monomer or other reactant All 0,1     Maximum residual content in the final material (QM) = 1 mg/kg in the product. 31 December 2028 1378   107-01-7 224 2-butene Monomer or other reactant All         31 December 2034 1379   107-88-0 228 1,3-butanediol Monomer or other reactant All         31 December 2034 1380   110-98-5 25265-71-8 257 dipropyleneglycol Monomer or other reactant All         31 December 2034 1381   138-22-7 322 lactic acid, butyl ester Additive or polymer production aid All         31 December 2031 1382   598-32-3 357 3-buten-2-ol Monomer or other reactant All 0,1     Only to be used as a co-monomer for the preparation of polymeric additive. Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. 31 December 2028 1383   1330-43-4 407 sodium tetraborate Additive or polymer production aid All     For boron, refer to Annex V.   31 December 2034 1384   1332-37-2 409 iron oxide Additive All     For iron, refer to Annex V. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1385   3724-65-0 467 crotonic acid Monomer or other reactant Additive All     (34)   31 December 2028 1386   4080-31-3 474 1-(3-chloroallyl)-3,5,7-triaza-1-azoniaadamantane chloride Additive or polymer production aid All 15       31 December 2031 1387     501 aluminium fibres, flakes and powders Additive All     For aluminium, refer to Annex V. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1388   7631-86-9 504 silicon dioxide Additive Polymer production aid All       For synthetic amorphous silicon dioxide: primary particles of 1 – 100 nm which are aggregated to a size of 0,1 – 1 μm which may form agglomerates within the size distribution of 0,3 μm to the mm size. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2037 1389   7664-93-9 511 sulfuric acid Additive Polymer production aid All       If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2034 1390   7704-34-9 514 sulfur Aid to polymerisation All         31 December 2034 1391   7771-44-0 518 arachidonic acid Monomer or other reactant All         31 December 2028 1392   7772-98-7 519 sodium thiosulfate Additive or polymer production aid All     (18)   31 December 2034 1393   9003-11-6 106392-12-5 551 poly(ethylene propylene) glycol Other (processing aid) All         31 December 2028 1394   63148-62-9 575 polydimethylsiloxane (MW > 6 800 Da) Monomer or other reactant (base oil) Additive Polymer production aid Other (processing aid) All       Viscosity at 25 °C not less than 100 cSt (100 × 10 -6 m 2 /s). 31 December 2034 1395   10377-51-2 588 lithium iodide Additive or polymer production aid All     (6) For lithium, refer to Annex V.   31 December 2031 1396   11104-61-3 593 cobalt oxide Additive or polymer production aid All     For cobalt, refer to Annex V.   31 December 2031 1397   11129-60-5 594 manganese oxide Additive All     For manganese, refer to Annex V. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1398   12004-14-7 37293-22-4 598 calcium sulfoaluminate Additive All     For aluminium, refer to Annex V. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 1399   12626-88-9 606 manganese hydroxide Additive or polymer production aid All     For manganese, refer to Annex V. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1400   12751-22-3 607 iron phosphide Additive or polymer production aid Plastics     For iron, refer to Annex V. Only to be used in PET polymers and copolymers. 31 December 2031 1401   13463-67-7 610 titanium dioxide Additive Polymer production aid All       If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 1402   17194-00-2 625 barium hydroxide Additive or polymer production aid All     For barium, refer to Annex V. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2034 1403   25013-16-5 635 tert -butyl-4-hydroxyanisole Additive All 1500       31 December 2031 1404   25322-68-3 638 polyethyleneglycol Monomer or other reactant Additive Polymer production aid Aid to polymerisation Other (processing aid) All         31 December 2034 1405   25513-64-8 641 mixture of (35-45 % w/w) 1,6-diamino-2,2,4-trimethylhexane and (55-65 % w/w)1,6-diamino-2,4,4-trimethylhexane Monomer or other reactant All 2,5       31 December 2034 1406   68515-48-0 28553-12-0 728 phthalic acid, diesters with primary, saturated C 8 -C 10 branched alcohols, more than 60 % C 9 Additive or polymer production aid All     (25) (31) Only to be used as: (a) plasticiser; or (b) technical support agent in concentrations up to 0,1 % in the product. 31 December 2037 1407   68855-54-9 734 diatomaceous earth, soda ash flux-calcined Additive or polymer production aid All       If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2034 1408   73138-82-6 741 resin acids and rosin acids Monomer or other reactant Other (processing aid) All         31 December 2031 1409     789 hydrogenated homopolymers and/or copolymers made of 1-hexene and/or 1-octene and/or 1-decene and/or 1-dodecene and/or 1-tetradecene (MW: 440–12000) Additive or polymer production aid All       Average molecular weight not less than 440 Da. Viscosity at 100 °C not less than 3,8 cSt (3,8 × 10 -6 m 2 /s). 31 December 2034 1410   90751-07-8 82451-48-7 790 poly(6-morpholino-1,3,5-triazine- 2,4-diyl)-[(2,2,6,6-tetramethyl-4- piperidyl)imino)] hexa-methylene- [(2,2,6,6-tetramethyl-4-piperidyl)imino)] Additive Polymer production aid All 250     Average molecular weight not less than 2 400 Da. Residual content of morpholine < 30 mg/kg, of N,N′-bis(2,2,6,6-tetramethylpiperidin-4-yl)hexane–1,6-diamine < 15 000 mg/kg, and of 2,4-dichloro-6-morpholino-1,3,5-triazine < 20 mg/kg. 31 December 2034 1411     799 polyethyleneglycol (EO = 1-50) ethers of linear and branched primary (C 8 -C 22 ) alcohols Polymer production aid Other (processing aid) All 90     In compliance with the maximum ethylene oxide content as laid down in the purity criteria for food additives in Commission Regulation (EU) No 231/2012. 31 December 2037 1412     801 acids, C 2 -C 24 , aliphatic, linear, monocarboxylic, from natural oils and fats, lithium salt Additive or polymer production aid All     For lithium, refer to Annex V.   31 December 2031 1413     805 titanium dioxide, coated with a copolymer of n -octyltrichlorosilane and [aminotris(methylenephosphonic acid), penta sodium salt] Additive or polymer production aid All       The content of the surface treatment copolymer of the coated titanium dioxide is less than 1 % w/w. 31 December 2031 1414     810 neopentyl glycol, diesters and monoesters with benzoic acid and 2-ethylhexanoic acid Additive or polymer production aid All 250   (31)   31 December 2031 1415     815 trimethylolpropane, mixed triesters and diesters with benzoic acid and 2-ethylhexanoic acid Additive or polymer production aid All 250   (31)   31 December 2031 1416     878 acids, fatty (C 8 -C 22 ) from animal or vegetable fats and oils, esters with branched alcohols, aliphatic, monohydric, saturated, primary (C 3 -C 22 ) Additive or polymer production aid All         31 December 2031 1417     879 acids, fatty (C 8 -C 22 ) from animal or vegetable fats and oils, esters with alcohols, linear, aliphatic, monohydric, saturated, primary (C 1 -C 22 ) Additive or polymer production aid All         31 December 2031 1418     880 acids, fatty (C 8 -C 22 ), esters with pentaerythritol Polymer production aid Other (processing aid) All         31 December 2031 1419   128-44-9 902 1,2-benzisothiazol-3(2 H )-one 1,1-dioxide, sodium salt Additive or polymer production aid All       The substance shall comply with the specific purity criteria as set out in Commission Regulation (EU) No 231/2012. 31 December 2034 1420     924 trimethylolpropane, mixed triesters and diesters with n -octanoic and n -decanoic acids Additive or polymer production aid Plastics 2,5     Only for use in PET. 31 December 2037 1421   939402-02-5 974 phosphorous acid, mixed 2,4-bis(1,1-dimethylpropyl)phenyl and 4-(1,1-dimethylpropyl)phenyl triesters Additive or polymer production aid All 500 - expressed as the sum of the phosphite and phosphate forms of the substance, 4- tert -amylphenol and 2,4-di- tert -amylphenol 50 - for 2,4-di- tert -amylphenol       31 December 2037 1422     1046 zinc oxide, nanoparticles, coated with [3-(methacryloxy)propyl] trimethoxysilane (EUPL No 0695) Additive or polymer production aid Plastics     For zinc, refer to Annex V. Only to be used in unplasticised polymers. The restrictions and specifications specified for substance with EUPL Number 0695 shall be respected. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2037 1423     1053 fatty acids, C 16 -C 18 saturated, esters with dipentaerythritol Additive or polymer production aid All       Only to be used when produced from a fatty acid precursor that is obtained from edible fats or oils. 31 December 2037 1424   7695-91-2 58-95-7 1055 α-tocopherol acetate Additive or polymer production aid Plastics       Only to be used as antioxidant in polyolefins. The substance or its hydrolysis products are authorised food additives and compliance with Article 11(3) of Commission Regulation (EU) No 10/2011 shall be verified. 31 December 2037 1425     1062 mixture composed of 97 % tetraethyl orthosilicate (TEOS) with CAS No. 78-10-4 and 3 % hexamethyldisilazane (HMDS) with CAS No. 999-97-3 Monomer or other reactant All       Only to be used for the production of recycled PET and at up to 0,12 % (w/w). 31 December 2037 1426     1075 montmorillonite clay modified with hexadecyltrimethylammonium bromide Additive or polymer production aid Plastics       Only to be used as an additive at up to 4,0 % w/w in polylactic acid for cold water applications. Can form nanoform platelets thinner than 100 nm in one or two dimensions. Such platelets must be aligned parallel to the polymer surface and fully integrated into the polymer. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1427     1077 titanium dioxide surface-treated with fluoride-modified alumina Additive or polymer production aid All       Only to be used at up to 25,0 % w/w, including in the nanoform. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1428       castor oil fatty acids, dehydrated Monomer or other reactant Other (processing aid) Rubber, coatings         31 December 2034 1429   61790-39-4   castor oil fatty acids, hydrogenated Monomer or other reactant Additive Coatings, lubricants         31 December 2031 1430   55965-84-9   5-chloro-2-methyl-2 H -isothiazol-3-one (CAS No. 26172-55-4) and 2-methyl-2 H -isothiazol-3-one (CAS No. 2682-20-4), mixture (3:1) Other (in-can preservative) Coatings 7,5     Restriction = 0,025 mg/dm 2 . Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 3.4 and 4.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2034 1431   68938-15-8   fatty acids, coco hydrogenated Monomer or other reactant Coatings         31 December 2034 1432   110-54-3   n -hexane, incl. structural isomers up to 40% (cyclohexane < 3 %) List No. 925-292-5 Polymer production aid All 250     MTC does not need to be verified when process temperature > 100 °C. 31 December 2031 1433   93685-81-5   isododecane (main isomer: 2,2’,4,6,6’-pentamethylheptane) Polymer production aid Plastics 2,5       31 December 2034 1434   926-099-9   stone wool Additive Rubber       Diameter > 1 μm (average diameter 5-30 μm). If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1435       acrylic acid, esters with alcohols, monohydric, aliphatic, saturated, C 1 -C 18 Monomer or other reactant Coatings 300 - expressed as acrylic acid   (21)   31 December 2031 1436       adipic acid, esters with alcohols, monohydric, aliphatic, primary, saturated, (C 6 -C 12 ) Additive Plastics         31 December 2031 1437       addition products of trivinylcyclohexane and alpha, omega-dihydrogen-polyhydrogenmethyldimethylsiloxanes Monomer or other reactant Silicone       Maximum dosage = 10% (w/w). 31 December 2031 1438       alkadienes (C 3 -C 8 ) Monomer or other reactant Coatings       Maximum residual content in the final material (QM) = 1 mg/kg in the product. 31 December 2031 1439       alkoxysilanes with functional groups, e.g. vinyl, methacryl, amino or glycidyl groups Polymer production aid Plastics       Maximum dosage = 0,5 % (w/w) based on the filler, or maximum 0,3 % (w/w) based on the plastic component 31 December 2031 1440       alkylarylsulfonic acid Polymer production aid Plastics       Maximum dosage = 3 % (w/w). 31 December 2031 1441       alkyl(C 8 -C 18 )benzene sulfonates, sodium salts Polymer production aid Rubber     (41)   31 December 2031 1442       alkyl(C 8 -C 18 )naphthalene sulfonates, sodium salts Polymer production aid Rubber     (41)   31 December 2031 1443       esters of alkyl(C 1 -C 8 )-silicic acid or orthosilicic acid with aliphatic monohydric alcohols (C 2 -C 4 ) and the monomethyl ether of ethanediol (methylglycol) and their condensation products Aid to polymerisation Silicone       Maximum dosage = 3 % (w/w). 31 December 2031 1444       amide of aliphatic carboxylic acids, C 8 -C 22 Polymer production aid Silicone       Maximum dosage = 1,5 % (w/w). 31 December 2031 1445       3-aminocrotonic acid, esters with butyleneglycol Additive Coatings         31 December 2031 1446       3-aminocrotonic acid, esters with mono- or dihydric alcohols Additive Coatings         31 December 2031 1447       carbon fibres Additive Rubber       Carbon fibres according to EUPL Number 2041, Annex IV. 31 December 2031 1448       condensation products of ethylene oxide with alcohols (C 3 -C 18 ), phenolalkyl (C 4 -C 9 ), and their sulfonated, sulfurated or phosphated derivated Additive Polymer production aid Rubber         31 December 2031 1449       cyclic organopolysiloxane with methylgroups, alone or n -alkyl (C 2 -C 32 )-group Monomer or other reactant (base oil) Lubricants         31 December 2031 1450       α,ω-dicarboxylic acids (C 6 -C 12 ), aliphatic, unbranched Monomer or other reactant All         31 December 2031 1451       fatty acids (unbranched, saturated and unsaturated, with an even number of carbon atoms, C 8 -C 22 , with a maximum content of 2 % unsaponifiable matter), as compounds with bis(2-hydroxyethyl)amine Additive Polymer production aid Plastics 1500       31 December 2031 1452       fatty acids (unbranched, saturated and unsaturated, with an even number of carbon atoms, C 8 -C 22 , with a maximum content of 2 % unsaponifiable matter), amides of Additive Polymer production aid Aid to polymerisation Plastics, rubber         31 December 2031 1453       fatty acids (unbranched, saturated and unsaturated, with an even number of carbon atoms, C 8 -C 22 , with a maximum content of 2 % unsaponifiable matter), esterified with alcohols, monohydric, primary, unbranched, saturated, C 4 -C 18 , as well as oleyl alcohol Additive Polymer production aid Plastics         31 December 2031 1454   9003-36-5   formaldehyde, polymer with 2-(chloromethyl)oxirane and phenol (Novolac glycidyl ether, NOGE) Monomer or other reactant Coatings 2,5 - expressed as the sum of NOGE and its hydrolysis products bisphenol F MTC tap = 2,5 μg/l epichlorohydrin MTC tap = 0,1 μg/l (15) (49) Only to be used in powder coatings. 31 December 2031 1455       glycerol esters with linear fatty acids saturated or not with an even number of carbon C 8 -C 20 and/or adipic acid, citric acid, oxystearin acid and ricinoleic acid Additive Coatings         31 December 2031 1456       methacrylic acid, esters with alcohols, monohydric, aliphatic saturated, C 1 -C 18 Monomer or other reactant Rubber 300 - expressed as methacrylic acid   (22)   31 December 2031 1457       mono- n -octyltin tris(maleic acid half ester), prepared with C 1 -C 18 , primary, unbranched, saturated alcohols Additive Polymer production aid Plastics     (11)   31 December 2031 1458       mono- n -octyltin tris[monoalkyl(C 1 -C 18 ) maleate] Additive Polymer production aid Plastics     (11)   31 December 2031 1459       organopolysiloxanes, containing methylgroups on each silicon atom which can be partially replaced by alkenyl(C 2 -C 32 )groups, alkyl (C 2 -C 32 )groups, hydroxylgroups, hydrogen, disubstituted alkylamines and/or hydroxylated alkylgroups, acetoxy and/or alkoxy groups and their condensation products with polyethyleneglycol and/or polypropyleneglycol, fluorinated alkylgoups, and phenylgroups Monomer or other reactant Additive (polymeric) Coatings, silicone         31 December 2031 1460       organopolysiloxanes, linear and branched, with methyl groups alone and/or n -alkyl(C 2 -C 32 )-, and/or phenyl-2, and/or vinyl-, and/or hydroxyl-, and/or alkoxy(C 1 -C 4 )-, and/or hydrogen-, and/or carboalkoxyalkyl(-(CH 2 )2-17-C(O)-O-(CH 2 )0-17CH 3 )-, and/or hydroxyalkyl(C 1 -C 3 )-groups Monomer or other reactant Additive (polymeric) Rubber, silicone       It may not contain cyclic polysiloxanes that beside the phenyl group bear a hydrogen atom or a methyl group at the same silicon atom. 31 December 2031 1461       organopolysiloxanes, linear or branched, as mentioned PM/REF No. 69848, but in addition with up to max. 5 % hydrogen and/or alkoxy(C 2 -C 4 ) and/or carboalkoxyalkyl (-(CH 2 )2-17-C(O)-O-(CH 2 )0-17CH 3 )- and/or hydroxyalkyl(C 1 -C 3 ) groups attached to the silicon atom Monomer or other reactant Additive (polymeric) Rubber, silicone         31 December 2031 1462       organopolysiloxanes, linear or branched and/or cyclic, with methyl groups alone or with n-alkyl(C 2 -C 32 ), phenyl and/or hydroxyl groups attached to the silicon atom, and their condensation products with polyethylene and/or polypropyleneglycol Monomer or other reactant Additive (polymeric) Rubber, silicone       It may not contain cyclic polysiloxanes that beside the phenyl group bear a hydrogen atom or a methyl group at the same silicon atom. 31 December 2031 1463   68083-14-7 73138-88-2 68440-81-3   organopolysiloxanes, linear or branched with methyl- or phenylgroups Monomer or other reactant (base oil) Plastics, lubricants         31 December 2037 1464   9016-00-6 63148-62-9 68037-74-1   organopolysiloxanes, linear or branched with methylgroups Monomer or other reactant (base oil) Plastics, lubricants         31 December 2031 1465       organopolysiloxanes with vinyl groups attached to the silicon atom Monomer or other reactant Additive (polymeric) Rubber, silicone         31 December 2031 1466   64741-56-6   petroleum residues, vacuum distilled Monomer or other reactant (resin) Rubber         31 December 2031 1467   92062-05-0   petroleum residues, thermal cracked vacuum Monomer or other reactant (resin) Rubber         31 December 2031 1468       platinum complexes Aid to polymerisation Silicone         31 December 2031 1469       polyalcoxyesters of acids, fatty with an even number of carbon (C 8 -C 24 ) Additive Plastics         31 December 2031 1470   68037-01-4   poly 1-decene hydrated Monomer or other reactant (base oil) Lubricants       Impurities of hydrocarbons with number of Carbon smaller than 30 not more than 1,5 %, free of naphthene, aromatics and PAH. 31 December 2034 1471       polydienic resin, synthetic Additive All         31 December 2031 1472       polydimethyl siloxanes and polydimethyl silicones, 3-aminopropyl-group terminated, polymers with 1-isocyanato-3-isocyanatomethyl-3,5,5-trimethylcyclohexane Monomer or other reactant Additive (polymeric) Rubber, silicone     (16) Note conditions of use for 1-isocyanato-3-isocyanatomethyl-3,5,5-trimethylcyclohexane (EUPL Number 0410) and 1-amino-3-aminomethyl-3,5,5-trimethylcyclohexane (EUPL Number 0391). 31 December 2031 1473       polydimethyl siloxanes and polydimethyl silicones, 3-aminopropyl-group terminated, polymers with bis(4-isocyanatocyclohexyl)methane Monomer or other reactant Additive (polymeric) Rubber, silicone     (16) Note conditions of use for bis(4-isocyanatocyclohexyl)methane (EUPL Number 0420) and bis(4-aminocyclohexyl)methane (EUPL Number 0366). 31 December 2031 1474       polyethylene glycol ethers of monohydric aliphatic alcohols (C 12 -C 20 ) and of alkylphenols (C 2 -C 9 ) Polymer production aid Silicone         31 December 2031 1475   9002-98-6   polyethyleneimine Additive Plastics, coatings       For polypropylene as an anchoring agent: ≤ 0,05 μg/dm 2 provided that the product does not release ethyleneimine. 31 December 2034 1476       polyethylene oxide (8-14), esterified with lauric acid, oleic acid, ricinoleic acid and/or stearic acid Monomer or other reactant Other Rubber, coatings         31 December 2031 1477       polyethylene oxide, molecular weight > 200 (pEO) Additive Polymer production aid Plastics         31 December 2031 1478       polyethylene oxide(4-14)ether of octyl- and/or nonylphenol Polymer production aid Plastics, rubber 250       31 December 2031 1479       polyethylene oxide(4-14)ethers of monohydric, primary, unbranched, saturated C 12 -C 18 alcohols Additive Plastics 250       31 December 2031 1480       polypropylene oxide, esterified with lauric acid, oleic acid, ricinoleic acid and/or stearic acid Polymer production aid Aid to polymerisation Plastics         31 December 2031 1481       polysaccharides Polymer production aid Rubber         31 December 2031 1482   9003-53-6   polystyrene (with pentane as expansion agent) Monomer or other reactant (resin) Plastics, rubber         31 December 2031 1483       polyterpenes Additive Lubricants         31 December 2031 1484   25213-24-5   polyvinyl alcohol, manufactured by saponification of polyvinyl acetate, with a degree of saponification ≥ 20 % Polymer production aid Plastics       Maximum dosage = 1 % (w/w). 31 December 2034 1485       polyvinyl alcohol, partially acetylated with < 20 % acetyl groups and a K-value of > 40 Polymer production aid Coatings, silicone         31 December 2031 1486   71011-24-0   quaternary ammonium compounds, benzyl(hydrogenated tallow alkyl)dimethyl, chlorides, compounds with bentonite Polymer production aid Additive Lubricants         31 December 2031 1487   68953-58-2   quaternary ammonium compounds, bis(hydrogenated tallow alkyl)dimethyl, salts with bentonite Polymer production aid Additive Lubricants         31 December 2031 1488       reticulated cationic polyalkyleneamine a) epichlorhydric polyamide resin made from diaminopropylmethylamine and epichlorohydrin; b) epichlorhydric polyamide resin made from epichlorohydrin, adipic acid, caprolactam, diethylene triamine and/or ethylene diamine; c) epichlorhydric polyamide resin made from adipic acid, diethylene triamine and epichlorohydrin or a melt of epichlorhydrin and ammoniac; d) epichlorhydric polyamide-polyamide resin made from epichlorohydrin, dimethyladipate and diethylene triamine; e) epichlorhydric polyamide-polyamide resin made from epichlorohydrin, adipamide and diaminopropylmethylamine Additive Plastics     (49)   31 December 2031 1489       sebacic acid, reaction product with stearylamide, neutralised with calcium hydroxide Polymer production aid Additive Lubricants         31 December 2031 1490       silanols, with at least one hydroxyl group and one or more methyl, vinyl or phenyl groups on every silicon atom Monomer or other reactant Rubber 0,1       31 December 2031 1491   68988-56-7   silicium dioxide, reaction product with trimethylchlorosilane and isopropyl alcohol Polymer production aid Lubricants         31 December 2031 1492   9006-65-9   silicone oils (organopolysiloxanes with methyl and/or phenyl groups) Monomer or other reactant (base oil) Additive (polymeric) Rubber, coatings, lubricants         31 December 2031 1493       sorbitol esters with linear fatty acids, saturated or not, with an even number of carbon C 8 -C 20 Additive Coatings 0,1       31 December 2031 1494       stearic acid mono or di esters with ethanediol and/or ether bis(2-hydroxyethyl) and/or triethyleneglycol Additive Plastics         31 December 2031 1495       titanic acid, esters with isobutanol, n -butanol and the enolate of ethylacetoacetate Aid to polymerisation Silicone         31 December 2031 1496   26780-96-1   2,2,4-trimethyl–1,2-dihydrochinolin (polymerised) Additive Rubber         31 December 2031 1497       trivinyl cyclohexane and α,ω-dihydrogenpolyhydrogenmethyldimethyl-siloxanes, addition products of Monomer or other reactant Additive (polymeric) Silicone       Maximum dosage = 10 % (w/w). 31 December 2031 1498       urea-formaldehyde condensation products Monomer or other reactant (resin) Additive Polymer production aid Plastics, coatings     (15)   31 December 2031 1499       vinyl esters of monohydric, saturated, aliphatic carboxylic acids, C 2 -C 20 Monomer or other reactant Plastics 2,5       31 December 2031 1500   2098907-70-9   siloxane and silicone, dimethyl, hydroxyterminated (MW > 7400 Da), ethers with C 16 -C 18 fatty acids esters with pentaerythritol Polymer production aid Other (processing aid) Rubber       The polymer may contain siloxane and silicone, dimethyl, hydroxy-terminated (MW > 7400 Da), fatty acids, and C 16 -C 18 -fatty acids ester of pentaerythritol. 31 December 2031 1501   1318-02-1   zeolites, natural and synthetic, sodium salts Additive Aid to polymerisation Plastics, rubber, coatings     For aluminium, refer to Annex V. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1502       hydrocarbons, C 10 -C 14 , aromatic content ≤1 % Additive Plastics, coatings       Only to be used if the production process temperature is above the boiling point. 31 December 2031 1503 921-728-3 64741-66-8   hydrocarbons, C 7 -C 9 , isoalkanes, with EC No. 921-728-3, boiling point 90 to 150 °C, negligible solubility in water Additive All       Only to be used if the production process temperature is above the boiling point. 31 December 2031 1504 920-750-0 64742-49-0   hydrocarbons, C 7 -C 9 , n -alkanes, isoalkanes, cyclics, with EC No. 920-750-0, boiling point 90 to 165 °C, log Po/w=2.2-5.2, insoluble in water Additive All       Only to be used if the production process temperature is above the boiling point. 31 December 2031 1505       titanium hydroxide (orthotitanic acid) Additive All, except rubber       If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1506   119345-04-9   benzene, 1,1'-oxybis-,tetrapropylene derivatised, sulfonated sodium salts Additive Polymer production aid Coatings 450 For the MTC tap values of degradation products, refer to Table 4.     31 December 2031 1507   61789-44-4   castor oil fatty acids Monomer or other reactant Coatings         31 December 2031 1508   61790-37-2   tallow oil fatty acids Monomer or other reactant (base oil) Coatings, lubricants         31 December 2031 1509   67762-90-7   silicon dioxide, reaction product with polydimethylsiloxane Additive Polymer production aid Coatings, lubricants       For synthetic amorphous silicon dioxide, silanated: primary particles of 1–100 nm which are aggregated to a size of 0,1–1 μm and may form agglomerates within the size distribution of 0,3 μm to the mm size. 31 December 2031 1510   68308-51-0   cotton seed oil fatty acids Monomer or other reactant Coatings         31 December 2031 1511   68424-45-3   linseed oil fatty acids Monomer or other reactant Coatings         31 December 2031 1512   68611-44-9   silicon dioxide, reaction product with dimethyldicholorosilane Polymer production aid Additive Lubricants       For synthetic amorphous silicon dioxide, silanated: primary particles of 1–100 nm which are aggregated to a size of 0,1–1 μm and may form agglomerates within the size distribution of 0,3 μm to the mm size. 31 December 2031 1513   68909-20-6   silicon dioxide, reaction product with hexamethyldisilazane Polymer production aid Additive Lubricants       For synthetic amorphous silicon dioxide, silanated: primary particles of 1–100 nm which are aggregated to a size of 0,1–1 μm and may form agglomerates within the size distribution of 0,3 μm to the mm size. 31 December 2031 1514   84625-38-7   sunflower oil fatty acids Monomer or other reactant Coatings         31 December 2031 1515   9003-35-4   phenolformaldehyde resins Aid to polymerisation Rubber     (15) MW > 1 000 Da. 31 December 2031 1516   91744-27-3   glycerides, mono-, di- and tri castor oil Additive Polymer production aid Coatings         31 December 2031 1517   92044-96-7   olive oil fatty acids Monomer or other reactant Coatings         31 December 2031 1518   93165-31-2   rapeseed oil fatty acids Monomer or other reactant Coatings         31 December 2031 1519       corn oil fatty acids Monomer or other reactant Coatings         31 December 2031 1520       dicyclopentadiene-indene-styrene-alpha-methylstyrene-vinyltoluene-isobutylene-copolymer, hydrogenated Additive Polymer production aid Coatings 250       31 December 2031 1521       fish oil fatty acids Monomer or other reactant Coatings         31 December 2031 1522       hempseed oil fatty acids Monomer or other reactant Coatings         31 December 2031 1523       palm oil fatty acids Monomer or other reactant Coatings         31 December 2031 1524       palmkernel oil fatty acids Monomer or other reactant Coatings         31 December 2031 1525       perilla oil fatty acids Monomer or other reactant Coatings         31 December 2031 1526       poppy-seed oil fatty acids Monomer or other reactant Coatings         31 December 2031 1527       pumpkin seed oil fatty acids Monomer or other reactant Coatings         31 December 2031 1528       ricinoleic acid, dehydrogenated Monomer or other reactant Coatings         31 December 2031 1529       safflower oil fatty acids Monomer or other reactant Coatings         31 December 2031 1530       sesame oil fatty acids Monomer or other reactant Coatings         31 December 2031 1531       walnut oil fatty acids Monomer or other reactant Coatings         31 December 2031 1532       1,4-butanediol, trimethylolpropane, 2,3-butylene glycol, hydroquinone dihydroxydiethylether and their condensation derivatives with propylene oxide Monomer or other reactant Plastics     (29)   31 December 2031 1533       1,5-naphthylenediisocyanate, or 4,4'-diphenylmethanediisocyanate, or toluylenediisocyanate Monomer or other reactant Plastics     (16) Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2031 1534       acrylonitrile copolymers with divinylbenzene (except ion exchange resins) Additive Plastics 0,1 - expressed as acrylonitrile monomer       31 December 2031 1535       acrylic, fumaric, maleic and methacrylic esters Additive Plastics     (21)   31 December 2031 1536       beta amino crotonic acid esters with 1,4-butylene glycol and with C 16 -C 18 fatty alcohols Additive Plastics       For rigid PVC and its copolymers with predominantly plasticiser-free PVC content: maximum dosage = 3 % (w/w). 31 December 2031 1537       butylated, styrenated, butylstyrene cresols with an average molecular weight 312 Additive Plastics       Maximum dosage = 0,5 % (w/w). 31 December 2031 1538       calcium, lithium, manganese, aluminium, zinc, sodium, potassium, magnesium stearates, palmitates, ricinoleates, heptanoates, octoates Additive Plastics     For aluminium, lithium, manganese and zinc, refer to Annex V.   31 December 2031 1539       castor oil and its dehydration, hydrogenation and/or condensation products with adipic, sebacic and phthalic acids Additive Plastics     (27)   31 December 2031 1540       clays Additive Rubber         31 December 2031 1541       condensation products of formaldehyde with: — phenol — cresol — xylenol — resorcinol melamine Monomer or other reactant Rubber   MTC tap for formaldehyde: 0.15 MTC tap for phenols: 0.05 (15)   31 December 2031 1542       condensation products of polyoxyethylene-3 with fatty alcohols C 10 -C 18 Additive Plastics       For polyolefin films: maximum dosage = 1 % (w/w). 31 December 2031 1543       copolymers of alpha-methylstyrene with vinyltoluene Monomer or other reactant Plastics         31 December 2031 1544       copolymers of butadiene with styrene and divinylbenzene Monomer or other reactant Plastics         31 December 2031 1545       copolymers of styrene and/or alpha-methylstyrene with acrylonitrile Monomer or other reactant Plastics 0,1 - expressed as acrylonitrile monomer       31 December 2031 1546       copolymers of styrene and/or alpha-methylstyrene with butadiene Monomer or other reactant Plastics         31 December 2031 1547       copolymers of styrene and/or alpha-methylstyrene with butadiene and acrylonitrile Monomer or other reactant Plastics 0,1 - expressed as acrylonitrile monomer       31 December 2031 1548       copolymers of styrene and/or alpha-methylstyrene with methylmethacrylate Monomer or other reactant Plastics         31 December 2031 1549       copolymers of styrene with divinylbenzene (except ion exchange resins) Monomer or other reactant Plastics         31 December 2031 1550       copolymers of tetrafluoroethylene with hexafluoropropylene Monomer or other reactant Plastics     (38)   31 December 2028 1551       copolymers of vinyl chloride with acrylonitrile Monomer or other reactant Plastics 0,1 - expressed as vinyl chloride monomer and acrylonitrile     Vinyl chloride monomer: maximum residual content in the final material (QM) = 1 mg/kg. 31 December 2031 1552       copolymers of vinyl chloride with cetylvinyl ether Monomer or other reactant Plastics 0,1 - expressed as vinyl chloride monomer and acrylonitrile     Vinyl chloride monomer: maximum residual content in the final material (QM) = 1 mg/kg. 31 December 2031 1553       copolymers of vinyl chloride with vinyl acetate modified with maleic anhydride and polyvinyl alcohol Monomer or other reactant Plastics 0,1 - expressed as vinyl chloride monomer and acrylonitrile     Vinyl chloride monomer: maximum residual content in the final material (QM) = 1 mg/kg. 31 December 2031 1554       copolymers of vinyl chloride with vinylidene chloride Monomer or other reactant Plastics 0,1 - expressed as vinyl chloride monomer and acrylonitrile     Vinyl chloride monomer: maximum residual content in the final material (QM) = 1 mg/kg. 31 December 2031 1555       copolymers of vinylidene chloride with acrylonitrile Monomer or other reactant Plastics 0,1 - expressed as vinyl chloride monomer and acrylonitrile       31 December 2031 1556       cresols Monomer or other reactant Rubber   formaldehyde MTC tap = 150 μg/l.     31 December 2031 1557   85116-97-8   diethylene glycol ester with stearic acid Additive Plastics         31 December 2031 1558       diphenylcarbonate with phosgene Monomer or other reactant Plastics         31 December 2031 1559       emulsion silicones Additive Rubber       Composition according to silicones. 31 December 2031 1560       epoxy resins Other (used in the casting process to produce cast film or moulding) Plastics         31 December 2031 1561       ester products between rosin, maleic and citric acid with C 3 -C 6 polyalkaloids Monomer or other reactant Rubber         31 December 2031 1562       ester-like condensation products between rosin, maleic acid and citric acid with polyalcohols containing three to six C atoms in the molecule Monomer or other reactant Plastics         31 December 2031 1563       esters of fatty acids with polyglycerol Additive Plastics       For PVC and polyolefin stretch films. 31 December 2031 1564       esters of glycerol with behenic and arachidic acids Additive Plastics         31 December 2031 1565       esters of saturated aliphatic acids C 6 -C 22 with saturated aliphatic monohydroxyl alcohols C 2 -C 20 , including oleic alcohol Additive Plastics       Maximum residual content in the final material (QM) = 15 000 mg/kg. 31 December 2031 1566       ethylene copolymers with butene Monomer or other reactant Plastics         31 December 2031 1567       ethylene copolymers with propylene Monomer or other reactant Plastics         31 December 2031 1568       ethylenediamine with fatty acid Monomer or other reactant Plastics         31 December 2031 1569       glycerol, esters with caprylic and n -decanoic acids Additive Plastics         31 December 2031 1570       glycerophthalic resins modified with oil and styrene and/or alpha-methylstyrene Monomer or other reactant Plastics     (27)   31 December 2031 1571       hexamethylenediamine with adipic and/or sebacic acid Monomer or other reactant Plastics         31 December 2031 1572       hydrogenated homopolymers and/or copolymers of 1-decene and/or 1-dodecene and/or 1-octene Additive Plastics         31 December 2031 1573       iso-octyl-epoxy-stearate Additive Plastics         31 December 2031 1574       linseed oils epoxidised using good industrial practice Additive Plastics       For PVC and PVDC (epoxidised linseed oil iodine number < 6; oxirane oxygen content < 10 %). 31 December 2031 1575       maleic resins modified with rosin and abietic acid Monomer or other reactant Plastics, rubber         31 December 2031 1576       mercaptobenzimidazole and zinc salts Monomer or other reactant Rubber     For zinc, refer to Annex V. Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1577   63231-60-7   microcrystalline waxes Additive Rubber       The sample under examination is considered suitable for use if it does not exceed the following absorption limits per centimetre optical pathlength: — between 280 and 289 mμ: 0.15; — between 290 and 299 mμ: 0.12: — between 300 and 359 mμ: 0.08; — between 360 and 400 mμ: 0.02. 31 December 2031 1578       mixture of dimethyltin-s,s'-bis (isooctylmecraptoacetate) and mono methyltin-s,s'-tris (isooctylmecraptoacetate) Additive Plastics     (9) For use in PVC and rigid PVC copolymers free of plasticisers. 31 December 2031 1579 200-338-0 246-770-3 57-55-6 25265-71-8   mono- and dipropylene glycols Monomer or other reactant Plastics         31 December 2031 1580 277-291-8 - 73138-45-1 -   montanic acid ester with ethanediol and 1,3 butanediol Additive Plastics       Provided that the product does not release ethylene glycol. 31 December 2031 1581       octylalcohols Monomer or other reactant Plastics, rubber         31 December 2031 1582       organopolysiloxanes with 1,2-propanediol groups Monomer or other reactant Additive or polymer production aid Rubber         31 December 2031 1583       organopolysiloxanes with 1,3-propanediol groups Monomer or other reactant Rubber         31 December 2031 1584       organopolysiloxanes with 2,4-toluidene diisocyanate groups Monomer or other reactant Rubber 5,0 - expressed as primary aromatic amines   (16) Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2031 1585       organopolysiloxanes with 2,6-toluidene diisocyanate groups Monomer or other reactant Rubber 5,0 - expressed as primary aromatic amines   (16) Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2031 1586       organopolysiloxanes with ethylene oxide groups Monomer or other reactant Rubber         31 December 2031 1587       organopolysiloxanes with fluorinated groups Monomer or other reactant Rubber         31 December 2031 1588       organopolysiloxanes with methyl groups Monomer or other reactant Rubber         31 December 2031 1589       organopolysiloxanes with pentaerythritol groups Monomer or other reactant Additive or polymer production aid Rubber         31 December 2031 1590       organopolysiloxanes with phenyl groups Monomer or other reactant Rubber         31 December 2031 1591       organopolysiloxanes with propylene oxide groups Monomer or other reactant Rubber         31 December 2031 1592       organopolysiloxanes with sorbitol groups Monomer or other reactant Additive or polymer production aid Rubber         31 December 2031 1593       organopolysiloxanes with tetrafluoroethylene groups Monomer or other reactant Rubber         31 December 2031 1594       organopolysiloxanes with triethylene glycol groups Monomer or other reactant Rubber         31 December 2031 1595       organopolysiloxanes with trimethylolpropane groups Monomer or other reactant Rubber         31 December 2031 1596       organopolysiloxanes with triphenylmethanediisocyanate groups Monomer or other reactant Rubber 5,0 - expressed as primary aromatic amines   (16) Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2031 1597       organopolysiloxanes with vinyl groups Monomer or other reactant Rubber         31 December 2031 1598       pentenes Monomer or other reactant Rubber         31 December 2031 1599       phenolic resins alone or modified with glycerophthalic, epoxy or polyvinyl butyral resins or with butyl alcohol Monomer or other reactant Plastics       For paints and varnishes. 31 December 2031 1600       phenols and/or methylphenols condensed with styrene and/or alpha-methyl-styrene Additive Rubber         31 December 2031 1601       polyacetal resins Additive Rubber         31 December 2031 1602       polyamide resulting from the polymerisation of 1,3,5-benzene tricarbonyl chloride with 1,3-benzene diamine Monomer or other reactant Plastics       For film thickness ≤ 4 μm in reverse osmosis/ultrafiltration plants. Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1603       polyglycols Additive Rubber         31 December 2031 1604       polymers derived from the esterification of azelaic acid with n -hexyl and 2-ethylhexyl alcohols Additive Plastics         31 December 2031 1605       polymers of butyl, ethyl and methyl acrylates and methyl methacrylates Monomer or other reactant Plastics       Product must be washed with water at room temperature for 2 hours (except films and coatings < 0,2 mm thick). 31 December 2031 1606       saturated, unsaturated and hydroxylated fatty acids (C 8 -C 24 ) Additive Rubber         31 December 2031 1607       silica and hydrated silicas Additive Rubber       If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1608       silicone oils Additive Other (processing aid) Plastics, rubber         31 December 2031 1609       sodium pentamethylenedithiocarbamate Aid to polymerisation Rubber     (42)   31 December 2031 1610       sorbitol esters with erucic, lauric, linoleic, myristic, oleic, pelargonic, palmitic, ricinoleic, stearic, 12-hydroxystearic acids Additive Plastics         31 December 2031 1611       soya polymers Monomer or other reactant Additive Plastics         31 December 2031 1612       terpenic resins from dipentene, alfapinene, betapinene Monomer or other reactant Rubber         31 December 2031 1613       terpolymers of ethylene, vinyl acetate and carbon monoxide Additive Plastics       For use in PVC. 31 December 2031 1614       urea resins modified with butyl alcohol Monomer or other reactant Rubber       For use in paints and varnishes. 31 December 2031 1615       xylenols Monomer or other reactant Rubber   formaldehyde MTC tap = 150 μg/l.     31 December 2031 1616       alkyl(C 8 -C 18 )sulfonic acids, sodium salts Additive Polymer production aid Rubber 1500 - expressed as the sum of alkyl(C 8 -C 18 )sulfuric and alkyl(C 8 -C 18 )benzenesulfonic acids       31 December 2031 1617       alkyl(C 8 -C 18 )sulfuric acids, sodium salts Additive Polymer production aid Rubber 1500 - expressed as the sum of alkyl(C 8 -C 18 )sulfuric and alkyl(C 8 -C 18 )benzenesulfonic acids       31 December 2031 1618       chlorobutadienes Monomer or other reactant Rubber 250       31 December 2031 1619   63393-89-5   coumarone-indene resins Additive Rubber       In rubbers, not for use in products in contact with warm and hot water. 31 December 2031 1620       fatty acids, saturated and unsaturated, with an even number of C-atoms, C 8 -C 22 , unsaponifiables content not to exceed 2%, esters with pentaerythritol Additive Rubber       In rubbers, not for use in products in contact with warm and hot water. 31 December 2031 1621       fatty acids, linear, saturated and unsaturated, with an even number of C-atoms, C 8 -C 22 , unsaponifiables content not to exceed 2% Aid to polymerisation Rubber         31 December 2031 1622       fibres of pure cellulose Additive Rubber       In rubbers, not for use in products in contact with warm and hot water. 31 December 2031 1623       Fibres of regenerated cellulose in accordance with Commission Directive 2007/42/EC Additive Rubber       In rubbers, not for use in products in contact with warm and hot water. 31 December 2031 1624   82-74-2   hydrocarbon waxes, paraffin and microcrystalline (hydrogenated) Additive Rubber         31 December 2031 1625       organopolysiloxanes (silicones), with two methyl groups to each silicon atom, molecular weight 13,5-30 Additive or polymer production aid Rubber 750       31 December 2031 1626   8020-83-5   paraffin mineral oils Additive Rubber         31 December 2031 1627       phthalic acid, esters with triethyleneglycol Additive Rubber     (2) (27) In rubbers, not for use in products in contact with warm and hot water. 31 December 2031 1628       polyethyleneglycol (4-14) ethers of monohydric, linear, saturated, primary alcohols, C 12 -C 18 Additive Polymer production aid Rubber 250       31 December 2031 1629       polyethyleneglycol (4-14) ethers of octyl- and/or nonylphenol Additive Polymer production aid Rubber 250       31 December 2031 1630       polyethyleneglycol (8-14), esters with lauric, oleic, ricinoleic, and/or stearic acid Additive or polymer production aid Rubber         31 December 2031 1631   73398-64-8   quaternary ammonium compounds, di-C 8 -C 18 -alkyldimethyl, chlorides Additive or polymer production aid Rubber       In rubbers, not for use in products in contact with warm and hot water. 31 December 2031 1632       regenerated elastomers Additive Rubber       Regenerated elastomer to the extent that they are derived from rubber that complies with the European positive list for organic materials. 31 December 2031 1633       rosin derivatives Additive Rubber         31 December 2031 1634       silanols with at least one hydroxyl group and one or more methyl groups to each silicon atom Monomer or other reactant Rubber         31 December 2031 1635       siloxanes, with one hydrogen atom and one methyl group to each silicon atom Monomer or other reactant Silicone         31 December 2031 1636       siloxanes, with two methylgroups to each silicon atom and a vinyl group to the terminal silicon atoms Monomer or other reactant Rubber         31 December 2031 1637       soot (furnace black and channel black) and other carbon products like graphite and coke powder Additive Rubber         31 December 2031 1638       styrene (2 moles) condensed with 1 mole of a mixture of o -, m - and p -cresols, provided that the Brookfield viscosity of the end product is between 14 and 17 cP at 25 °C Additive Rubber       In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1639       styrene and/or alfa-methylstyrene and/or -alkene(C 3 -C 12 )phenol and/or methylphenol reaction products Additive Rubber 250       31 December 2028 1640       thioxylenols Additive or polymer production aid Rubber       In rubbers, not for use in products in contact with warm and hot water. 31 December 2031 1641       tris(mono- and dinonylphenyl) phosphite Additive Rubber       In rubbers, not for use in products in contact with warm and hot water. Tris(2-hydroxypropyl)amine impurity content not to exceed 1 %. 31 December 2031 1642       hemp fibres   Coatings       If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 1643       linen fibres   Coatings       If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 Notes : 1.    Note 1: Explanation of the notes in Tables 1 and 2 The meaning of the notes provided in Tables 1 and 2 is as follows: A. Substance numbers under European food contact material (FCM) legislation are provided for information purposes only. B. This column indicates the technical function that the starting substance performs when used in the drinking water contact materials the starting substance is authorised for. C. This column indicates the categories of drinking water contact materials the starting substance is authorised for. D. Total Maximum Tolerable Concentration at the tap (MTC(T) tap, organics ) means the maximum permitted concentration of specified substances migrating from organic materials into water intended for human consumption either as (a) total of moiety of the substances as provided under Table 3; or (b) total of the bound or unbound element or ion provided under Annex V. E. Relevant chemical species are those identified in accordance with Section 3, Annex IV to Commission Implementing Decision (EU) 2024/365. 2.    Note 2: Scope of an authorisation i. Where a starting substance appearing on the list as an individual entry is also covered by a group entry, the conditions of use and specifications and expiry dates applying to this starting substance shall be those indicated in the individual entry exclusively. ii. Unless stated otherwise in Table 1, the following salts of authorised acids, phenols and alcohols shall be considered covered by that authorisation: aluminium, ammonium, barium, calcium, cobalt, copper, europium, gadolinium, iron, lanthanum, lithium, magnesium, manganese, potassium, sodium, terbium, and zinc. This is subject to compliance with the corresponding MTC tap, organics value for the element or ion shown in Annex V for organic materials. In certain cases, where the safety assessment indicates concerns on the use of the free acids, only the salts should be authorised by indicating in the list the name as ‘… acid(s), salts’. iii. Mixtures obtained by mixing authorised starting substances without a chemical reaction of the components shall be considered covered by that authorisation. iv. Where a starting substance appears on the list as its anhydrous form, its approval shall be considered to covers its hydrated form. v. In the case of any natural or synthetic polymeric substance of an authorised monomer or other reactant and that polymeric substance is not used as an additive, that polymeric substance shall be considered covered by the authorisation of that monomer or other reactant. After the first European positive list, only entries for the monomer and other reactant shall be included. vi. In the case of any natural or synthetic polymeric substance of an authorised monomer or other reactant and that polymeric substance has a molecular weight of at least 1 000 Da, that polymeric substance shall be considered covered by the authorisation of that monomer or other reactant when used as additives. After the first European positive list, only entries for the monomer and other reactant shall be included. As an exception, this provision shall not apply to polymers obtained from microbial fermentation. vii. Pre-polymers and natural or synthetic polymers, as well as their mixtures, used as monomer or other reactant incorporated in the polymer shall be considered covered by the authorisation of the monomers or other reactant required to synthesise them. After the first European positive list, only entries for the monomer or other reactant shall be included. As an exception, this provision shall not apply to polymers obtained from microbial fermentation, pre-polymers for organopolysiloxanes used in the manufacture of silicones, rubbers, lubricants and surface treatment for fillers, and pre-polymers for coatings. viii. After the first European positive list, only entries for a polymer shall be included in cases for which points v to vii are not applicable. ix. Organic cementitious constituents authorised on the European positive list of organic cementitious constituents of Annex III may be used in organic materials when used as constituents in cementitious fillers. x. Ceramic compositions authorised on the European positive list of composition for enamels, ceramic and other inorganic materials of Annex IV may be used as fillers in organic materials. xi. Fibres made of metallic compositions authorised on the European positive list of compositions for metallic materials of Annex II may be used in organic materials. xii. Fibres and microballs made of glass compositions authorised on the European positive list of composition for enamels, ceramics and other inorganic materials of Annex IV may be used in organic materials provided that each filament has a diameter above 1 μm and the average diameter of the filaments in the organic material is above 5 μm. xiii. Water may be used as a starting substance in the manufacture of organic materials that come into contact with water intended for human consumption. xiv. An entry in Table 1 covers a nanoform only when it is explicitly stated in the approval of that entry. 3.    Note 3: Additional conditions of use i. Only biocidal active substances of Product-type 6 (Preservatives for products during storage) in accordance with Regulation (EU) No 528/2012 may be used as starting substances. ii. Entries in Table 1 and Table 2 which according to their conditions of use are used in organic materials as metallic fibres, shall adhere to the requirements of Annex II. Entries in Table 1 and Table 2 which according to their conditions of use are used in organic materials as ceramic fillers, shall adhere to the requirements of Annex IV. Entries in Table 1 and Table 2 which according to their conditions of use are used in organic materials as glass fibres and microballs, shall adhere to the requirements of Annex IV. Where indicated in Table 1, entries identified with an MTC(T) tap, organics shall comply with the following: Table 3 Total MTC(T) tap, organics values for groups of listed starting substances MTC(T) tap, organics reference in Table 1 MTC(T) tap, organics in μg/l MTC(T) tap, organics specification (1) 300 expressed as acetaldehyde (2) 1 500 expressed as ethyleneglycol (3) 1 500 expressed as maleic acid (4) 750 expressed as caprolactam (5) 150 expressed as the sum of the substances (6) 50 expressed as iodine (7) 60 expressed as tertiary amine (8) 300 expressed as the sum of the substances (9) 9,0 expressed as tin (for methyltin methyltin mercaptoacetates) (10) 0,3 expressed as tin (for di- n -octyltins) (11) 60 expressed as tin (for mono- n -octyltins) (12) 1 500 expressed as the sum of the substances (13) 75 expressed as the sum of the substances (14) 250 expressed as the sum of the substances and their oxidation products (15) 750 expressed as formaldehyde (16) 0,1 expressed as isocyanate moiety (17) 2,5 expressed as the sum of the substances (18) 500 expressed as SO 2 (19) 1 500 expressed as the sum of the substances (20) 250 expressed as trimellitic acid (21) 300 expressed as acrylic acid (22) 300 expressed as methacrylic acid (23) 250 expressed as the sum of the substances (24) 2,5 expressed as the sum of mono- n -dodecyltin tris(isooctylmercaptoacetate), di- n -dodecyltin bis(isooctyl mercaptoacetate), mono-dodecyltin trichloride and di-dodecyltin dichloride) expressed as the sum of mono- and di-dodecyltin chloride (25) 90 expressed as the sum of the substances (26) 250 expressed as isophthalic acid (27) 375 expressed as terephthalic acid (28) 2,5 expressed as the sum of 6-hydroxyhexanoic acid and caprolactone (29) 250 expressed as 1,4-butanol (30) 1 500 expressed as the sum of the substances (31) 3 000 expressed as the sum of the substances plus Diisobutyl phthalate, with synonyms 1,2-bis(2-methylpropyl) benzene–1,2-dicarboxylate or ‘DIBP’ and CAS number 84-69-5 which is not listed as an authorised substance in Table 1. However, it may co-occur with other phthalates as a consequence of its use as an aid to polymerisation and is included in group restrictions (32) 0,1 expressed as eugenol (33) 2,5 expressed as 1,3-benzenedimethanamine (hydrolysis product) (34) 2,5 expressed as crotonic acid (35) 30 expressed as the sum of phthalic acid, dibutyl ester (DBP), diisobutyl phthalate (DIBP), phthalic acid, benzyl butyl ester (BBP) and phthalic acid, bis(2-ethylhexyl) ester (DEHP) expressed as DEHP equivalents using the following equation: 5×DBP + 4×DIBP + 0.1×BBP + 1×DEHP (36) 2,5 expressed as the sum of triethanolamine and the hydrochloride adduct expressed as triethanolamine (37) 0,1 expressed as perchlorate (38) 0,05 expressed as PFAS Total (39) 0,01 expressed as Sum of PFAS (40) 150 expressed as the sum of (di)ethyleneglycol, monoalkyl (C 1 ,C 2 ,C 4 ,C 6 ) ethers and acetic acid, 2-ethoxyethyl ester (41) 1 500 expressed as the sum of sodium salts of alkyl(C 8 -C 18 )benzene sulfonates, alkyl(C 8 -C 18 )naphthalene sulfonates, alkyl(C 8 -C 18 )sulfates and alkyl(C 8 -C 18 )sulfonates (42) 50 expressed as the sum of thiurams and dithiocarbamates (43) 100 expressed as the sum of benzothiazole-2-thiol (CAS Number 149-30-4, EUPL Number 0910), di(benzothiazole-2-yl) disulphide (CAS Number 120-78-5, EUPL Number 0890), 2-(morpholinothio)benzothiazole (CAS Number 102-77-2), N- tert -butylbenzothiazole-2-sulphenamide (CAS Number 95-31-8, EUPL Number 0854), N-cyclohexylbenzothiazole-2-sulfenamide (CAS Number 95-33-0, EUPL Number 0847), 2-(2,6-dimethylmorpholinothio) benzthiazole (CAS Number 102-78-3) and 2-benzothiazyl-N,N-diethylthiocarbamyl sulphide (CAS Number 95-30-7) (44) 0,1 expressed as the sum of ethylvinylbenzene and divinylbenzene (45) 0,6 expressed as the sum of 1,4- and 1,5-hexadiene (46) 2,5 expressed as neodecanoic acid (47) 50 expressed as the sum of xanthogenates (48) 10 2,5 expressed as the sum of TMBPF, TMBPF-DGE, TMBPF-DGE·H 2 O and TMBPF-DGE·2H 2 O expressed as the sum of TMBPF-DGE·HCl, TMBPF-DGE·2HCl and TMBPF-DGE·HCl·H 2 O 49 6 expressed as 3-monochlor–1,2 -propane-diol Where entries in Table 1 which contain alkylphenol structural moieties are used as stabilisers they may be accompanied by the non-intentionally added substances shown in Table 4 and the MTC tap, organics values shown in the table shall apply to those substances. Table 4 MTC tap, organics for degradation products of stabilisers with alkylphenol structural moieties that are listed in the European positive list for organic materials EC Number CAS Number Substance name Maximum Tolerable Concentration at the tap (MTC tap, organics ) in μg/l 204-598-6 123-07-9 4-ethylphenol 0,1 202-679-0 98-54-4 4- tert -butylphenol 2,5 211-946-0 719-22-2 2,6-di- tert -butyl-1,4-benzoquinone 2,5 202-532-0 96-76-4 2,4-di- tert -butyl phenol 250 - 19263-36-6 3,5-di- tert -butyl-4-hydroxy styrene 0,1 216-592-0 1620-98-0 3,5-di- tert -butyl-4-hydroxy benzaldehyde 2,5 622-532-8 14035-33-7 3',5'-bis( tert -butyl)-4'-hydroxyacetophenone 2,5 872-478-6 82304-66-3 7,9-di-tert-butyl-1-oxaspiro[4.5]deca–6,9 -diene–2,8 -dione 100 228-985-4 243-556-1 6386-38-5 20170-32-5 methyl 3-(3,5-di- tert -butyl-4-hydroxyphenyl)propionate 3-(3,5-di- tert -butyl-4-hydroxyphenyl)propionic acid 50 as sum

EUROPEAN POSITIVE LIST OF COMPOSITIONS OF METALLIC MATERIALS AND GROUPS OF COMPOSITIONS FOR METALLIC MATERIALS

ANNEX IISupplementary provisions

ANNEX II EUROPEAN POSITIVE LIST OF COMPOSITIONS OF METALLIC MATERIALS AND GROUPS OF COMPOSITIONS FOR METALLIC MATERIALS Table 1 European positive list of individual metallic compositions for metallic materials EUPL Number Metallic composition category (A) Accepted metallic composition notation(s) Accepted metallic composition constituents Accepted metallic composition impurities Relevant product groups Conditions of use Expiry date Identity Minimum concentration (% w/w) Maximum concentration (% w/w) Identity Maximum concentration (% w/w) 1644 Copper-Zinc alloys CW501L-DW (CuZn10) Cu Zn 89,0 Remainder 91,0 Fe Ni Pb Sn Each other impurity 0,05 0,2 0,05 0,1 < 0,02 C - D Contents of certain elements are further restricted, compared to the standardised composition: Ni: ≤ 0,2 %. 31 December 2034 1645 Copper-Zinc alloys CW506L-DW (CuZn33) Cu Zn 66,0 Remainder 68,0 Fe Ni Pb Sn Each other impurity 0,05 0,2 0,05 0,1 < 0,02 B - D Contents of certain elements are further restricted, compared to the standardised composition: Ni: ≤ 0,2 %. 31 December 2034 1646 Copper-Zinc alloys CW507L-DW (CuZn36) Cu Zn 63,5 Remainder 65,5 Fe Ni Pb Sn Each other impurity 0,05 0,2 0,1 0,1 < 0,02 B - D Contents of certain elements are further restricted, compared to the standardised composition: Ni: ≤ 0,2 %. 31 December 2034 1647 Copper-Zinc alloys CW508L-DW (CuZn37) Cu Zn 62,0 Remainder 64,0 Al Fe Ni Pb Sn Each other impurity 0,05 0,1 0,2 0,1 0,1 < 0,02 B - D Contents of certain elements are further restricted, compared to the standardised composition: Ni: ≤ 0,2 %. 31 December 2034 1648 Copper-Zinc alloys CW509L-DW (CuZn40) Cu Zn 59,5 Remainder 61,5 Al Fe Ni Pb Sn Each other impurity 0,05 0,2 0,2 0,2 0,2 < 0,02 B - D Contents of certain elements are further restricted, compared to the standardised composition: Ni: ≤ 0,2 %; Pb: ≤ 0,2 %. 31 December 2034 1649 Copper-Zinc alloys CW510L-DW (CuZn42) Cu Zn 57,0 Remainder 59,0 Al Fe Ni Pb Sn Each other impurity 0,05 0,3 0,2 0,2 0,3 < 0,02 B - D Contents of certain elements are further restricted, compared to the standardised composition: Ni: ≤ 0,2 %. 31 December 2034 1650 Copper-Zinc-Aluminium alloys CuZn42Al (CC773S) Cu 57,0 59,0 Fe 0,3 B - D   31 December 2034 Zn Remainder   Pb 0,2 Al 0,1 0,3 Sn Each other impurity 0,3 < 0,02 1651 Copper-Zinc-Aluminium-Tin alloys CuZn35Al1.5Sn Cu 64,0 66,0 Fe 0,10 B - D   31 December 2034 Zn Remainder   Mn 0,10 Al Sn 1,40 0,50 1,60 0,70 Ni Pb Si Each other impurity 0,10 0,2 0,2 < 0,02 1652 Copper-Zinc-Aluminium-Silicon-Iron alloys CuZn35AlSiFe Cu 62,5 64,5 Ni 0,09 B - D   31 December 2034 Zn Remainder   Pb 0,15 Al Si Fe 0,5 0,5 0,04 0,85 0,8 0,1 Sn Each other impurity 0,1 < 0,02 1653 Copper-Zinc-Arsenic alloys CW707R (CuZn30As) Cu 69,0 71,0 Fe 0,05 B - D   31 December 2034 Zn Remainder   Mn 0,1 As 0,02 0,06 Pb Sn Each other impurity 0,07 0,05 < 0,02 1654 Copper-Zinc-Arsenic-Aluminium alloys CuZn35Al-C Cu 63,0 64,5 Fe 0,3 B - D   31 December 2034 Zn Remainder   Mn 0,1 As Al 0,04 0,2 0,14 0,7 Pb Sn Each other impurity 0,2 0,3 < 0,02 1655 Copper-Zinc-Arsenic-Aluminium alloys CW702R (CuZn20Al2As) Cu 76,0 79,0 Pb 0,05 A - B   31 December 2034 Zn Remainder   Ni 0,1 Al As 1,8 0,02 2,3 0,06 Sb Each other impurity 0,02 < 0,02 1656 Copper-Zinc-Arsenic-Antimony-Aluminium alloys CC771S (CuZn36AlAsSb-C) Cu 62,0 65,0 Fe 0,2 B - D Contents of certain elements are further restricted, compared to the standardised composition: Ni: ≤ 0,2 %. 31 December 2034 Zn Remainder   Mn 0,1 As Sb Αl 0,02 0,02 0,45 0,04 0,05 0,7 Ni Pb Sn Each other impurity 0,20 0,2 0,3 < 0,02 1657 Copper-Tin-Zinc-Phosphorus-Sulfur alloys CuSn4Zn2PS Cu Sn Zn P S 90,0 3,0 1,0 0,01 0,2 96,0 5,0 3,0 0,1 0,6 Fe Ni Pb Sb Each other impurity 0,3 0,3 0,2 0,1 < 0,02 B - D   31 December 2034 1658 Copper-Zinc-Silicon-Phosphorus alloys CW724R (CuZn21Si3P) Cu 75,0 77,0 Al 0,05 B - D   31 December 2034 Zn Remainder   Fe 0,3 Si P 2,7 0,02 3,5 0,10 Mn Ni Pb Sn Each other impurity 0,05 0,2 0,1 0,3 < 0,02 1659 Copper-Zinc-Silicon-Phosphorus alloys CC768S (CuZn21Si3P-C) Cu 75,0 77,0 Al 0,05 B - D B and Zr are used for grain refinement of this alloy. In the final material the content of these two elements shall be < 0,02 %. 31 December 2034 Zn Remainder   Fe 0,3 Si P 2,7 0,02 3,5 0,10 Mn Ni Pb Sn Each other impurity 0,05 0,2 0,1 0,3 < 0,02 1660 Copper-Silicon-Zinc-Manganese-Phosphorus alloys CC245E (CuSi4Zn4MnP-C) Cu Remainder   Al 0,3 B - D   31 December 2034 Si Zn Mn P 2,5 1,0 0,03 0,05 4,5 7,0 0,09 0,15 Fe Ni Pb Sn Each other impurity 0,3 0,10 0,10 0,3 < 0,02 1661 Copper-Silicon-Zinc-Manganese-Phosphorus alloys CC246E (CuSi4Zn9MnP-C) Cu Remainder   Al 0,3 B - D   31 December 2034 Si Zn Mn P 2,5 7,0 0,03 0,05 4,5 11,0 0,09 0,15 Fe Ni Pb Sn Each other impurity 0,3 0,10 0,10 0,3 < 0,02 1662 Copper-Silicon-Zinc-Manganese-Phosphorus alloys CuSi4Zn4MnP Cu Remainder   Al 0,3 B - D   31 December 2034 Si Zn Mn P 2,5 1,0 0,01 0,05 4,5 7,0 0,09 0,15 Fe Ni Pb Sn Each other impurity 0,3 0,10 0,10 0,3 < 0,02 1663 Copper-Silicon-Zinc-Manganese-Phosphorus alloys CuSi4Zn9MnP Cu Remainder   Al 0,3 B - D   31 December 2034 Si Zn Mn P 2,5 7,0 0,01 0,05 4,5 11,0 0,09 0,15 Fe Ni Pb Sn Each other impurity 0,3 0,10 0,10 0,3 < 0,02 1664 Copper-Tin-Phosphorus alloys CW453K (CuSn8) Cu Remainder   Fe 0,1 C - D   31 December 2034 Sn P 7,5 0,02 8,5 0,4 Ni Zn Each other impurity 0,2 0,2 < 0,02 1665 Copper-Tin-Lead-Phosphorus alloys CuSn10-C Cu Sn Pb P 88,0 9,0 0,2 0,01 90,0 11,0 1,0 0,2 Fe Mn Ni S Sb Zn Each other impurity 0,2 0,10 0,2 0,05 0,1 0,5 < 0,02 B - D Contents of certain elements are further restricted, compared to the standardised composition: Ni: ≤ 0,2 %; Sb: ≤ 0,1 %; Pb: 0.2 % - 1.0 %; P: 0.01 % - 0.2 %. 31 December 2034 1666 Copper-Nickel-Manganese-Iron alloys CW352 (CuNi10FeMn) Cu Remainder   Each impurity < 0,02 B - D For use exclusively for fittings and ancillaries for heat exchangers and desalination equipment. 31 December 2031 Ni Mn Fe 9,0 0,5 1,0 11,0 1,0 2,0 1667 Copper-Nickel-Manganese-Iron alloys CW352H (CuNi10Fe1Mn) CW353H (CuNi30Fe2Mn2) CW354H (CuNi30Mn1Fe) Cu Remainder   Each impurity < 0,02 B For use exclusively for fittings and ancillaries in desalination plants. 31 December 2031 Ni Fe Mn 9,0 1,0 0,5 32,0 2,5 2,5 1668 Coppers CW024A (Cu-DHP) Cu 99,9   Each impurity < 0,02 A - D Copper pipes cannot be used with all drinking waters distributed within the EU. Some water compositions (e.g., test water 1 according to EN 15664-1) cause a very high copper release. Member States may restrict the use of copper pipes with certain drinking waters. 31 December 2034 P 0,015 0,040 1669 Coppers CW004A (Cu-ETP) Cu 99,90   Each impurity < 0,02 C - D   31 December 2034 O   0,040 1670 Coppers CW008A (Cu-OF) Cu 99,95   Each impurity < 0,02 B - D   31 December 2034 1671 Coppers CW020A (Cu-PHC) Cu 99,95   Each impurity < 0,02 B - D   31 December 2034 P 0,001 0,006 1672 Coppers CW021A (Cu-HCP) Cu 99,95   Each impurity < 0,02 B - D   31 December 2034 P 0,002 0,007 1673 Coppers CW023A (Cu-DLP) Cu 99,90   Each impurity < 0,02 B - D   31 December 2034 P 0,005 0,013 1674 Tinned copper pipes and tinned copper fittings CW024A (Cu-DHP) with a tin layer of 1 μm thickness Sn 90   Impurities of the tin layer   A - D   31 December 2034 Cu   10       As Bi Cd Cr Ni Pb Sb Each other impurity 0,01 0,01 0,01 0,01 0,01 0,01 0,01 < 0,02 1675 Aluminium Aluminium Al 99,0   Fe+Si Cu Others (e.g., Cr, Mg, Mn, Ni, Zn) Each other impurity 1,0 0,10 if Cr and/or Mn ≥ 0,05 %; 0,20 if Cr and/or Mn < 0,05 % 0,1 each < 0,02 B - C For use in access ladders and other minor components, and not for long-term contact, as follows: a) short contact: up to 24 hours at any temperature condition; b) prolonged contact: more than 24 hours at a refrigerated temperature (8 - 12 °C). 31 December 2031 1676 Steel/Iron Galvanised steel Zn coating     Impurities of the zinc coating   A - D Acceptance is based on results that have been obtained with galvanised steel pipes with lead concentrations between 1,0 % and 0,6 % in the zinc layer, assuming a similar behaviour of pipes with lower lead concentrations. Galvanised steel pipes cannot be used with all drinking waters distributed within the EU. Member States may restrict the use of galvanised steel pipes with certain drinking waters which may cause unacceptable levels of corrosion. 31 December 2034 As Bi Cd Cr Pb Sb Each other impurity 0,02 0,01 0,01 0,02 0,05 0,01 < 0,02 1677 Steel/Iron Carbon steel according to EN 10025 / EN 10213 / EN 10222 Fe     Al 0,05 Carbon steel with protective layer/coating: A - D. Unprotected carbon steel: C2 - D Carbon Steel for pipes and tanks: carbon steel without permanent protective layers (e.g., cementitious mortar linings or organic coatings (e.g. epoxy resins)) is not suitable for use in contact with drinking water. Carbon Steel for ancillaries: unprotected carbon steel can be used for specific applications (e.g. pumps, valves) and only for small surface in contact with drinking water. 31 December 2034 C Cr Mo Mn Ni 0,02 0,02 0,02 0,02 0,02 0,25 0,30 0,12 1,65 0,50 Cu Nb P S Si Ti V Each other impurity 0,55 0,05 0,03 0,03 0,6 0,05 0,12 < 0,02 1678 Steel/Iron Cast iron according to EN 1561 / EN 1563 Fe     As 0,05 C2 Cast iron for pipes and tanks: cast iron without permanent protective layers is not suitable for pipes and fittings in contact with drinking water. Cast iron for ancillaries: unprotected cast iron can be used for specific applications (e.g. pumps, valves) and only for very small surface in contact with drinking water. 31 December 2034 C Cu Cr Mo Mn Ni Si 0,02 0,02 0,02 0,02 0,02 0,02 1.5 4,0 1,0 1,0 1,0 1,0 1,0 3,5 Mg P S Sn V Each other impurity 0,1 0,15 0,1 0,1 0,1 < 0,02 1679 Steel/Iron Stainless steels according to EN 10088 and EN 10283           A - D   31 December 2034 1680 Platings Electroplating of the outer surface (tin plating applied by a galvanic process) Cu Sn         B- D (by reference to Cu alloys listed elsewhere in the metallic materials EUPL) Restrictions: (a) Bulk material of components to be tinned: copper alloys approved in the metallic materials EUPL; (b) Layer composition: (i) Cu (ii) Sn; (c) Applied process: galvanic tin plating; (d) Purity of the used anodes: ≥ 99,90 %. 31 December 2031 1681 Platings Tin/Nickel platings applied by a galvanic process on the external surface Sn Ni 65 33 67 35     B- D (by reference to Cu alloys listed elsewhere in the metallic materials EUPL) Restrictions: (a) Bulk composition of components to be plated: copper alloys approved in the metallic materials EUPL; (b) composition of the plating: Sn (66 ± 1 %) and Ni (34 ± 1 %) (molar ratio 1:1); (c) applied process: galvanic plating; (d) purity of the used nickel-anodes: 99,90 %. 31 December 2031 1682 Platings Electrolytic Nickel/Chromium platings NI Cr         B   31 December 2031 1683 Passive compositions NiCr7030 Ni 60,0   Al 0,30 B - D   31 December 2034 Cr Si 29,0 0,50 32,0 2,0 C Co Cu Fe Mn P S Each other impurity 0,10 1,5 0,50 5,0 1,00 0,020 0,015 < 0,02 1684 Passive compositions Ni55Ti45 Ni Ti 54,0 Remainder 56,0 Each impurity < 0,02 C - D   31 December 2034 1685 Passive compositions Ti1 according to ISO 23515:2022 Ti Remainder   C O N H Fe Each other impurity Other impurities in total 0,08 0,18 0,03 0,015 0,20 < 0,1 < 0,4 B - D   31 December 2034 1686 Passive compositions Ti2 according to ISO 23515:2022 Ti Remainder   C O N H Fe Each other impurity Other impurities in total 0,08 0,25 0,03 0,015 0,30 < 0,1 < 0,4 B - D   31 December 2034 1687 Passive compositions Ti3 according to ISO 23515:2022 Ti Remainder   C O N H Fe Each other impurity Other impurities in total 0,08 0,35 0,05 0,015 0,30 < 0,1 < 0,4 B - D   31 December 2034 1688 Passive compositions Ti4 according to ISO 23515:2022 Ti Remainder   C O N H Fe Each other impurity Other impurities in total 0,08 0,40 0,05 0,015 0,50 < 0,1 < 0,4 B - D   31 December 2034 1689 Passive compositions Ti-6Al-4V according to ISO 23515:2022 Ti Remainder   C 0,08 B - D   31 December 2034 Al V 5,5 3,5 6,75 4,5 O N H Fe Each other impurity Other impurities in total 0,20 0,05 0,015 0,4 < 0,1 < 0,4 1690 Passive compositions Ti3.5Al3.0V0.4Mo0.9Ni0.25Pd0.14Ru0.2Fe Ti Remainder   Total impurities < 0,08 B - D   31 December 2031 Al V Mo Ni Pd Ru Fe   3,5 3 0,4 0,9 0,25 0,14 0,2 Table 2 European positive list of groups of metallic compositions for metallic materials EUPL Number Metallic composition category (A) Accepted metallic composition notation(s) Accepted metallic composition constituents Accepted metallic composition impurities Relevant product groups Conditions of use Expiry date Identity Minimum concentration (% w/w) Maximum concentration (% w/w) Identity Maximum concentration (% w/w) 1691 Copper alloys not elsewhere categorised Other copper alloys for Product Group D Cu Zn Si P Al Fe Mn Pb Ni As Sb   No restriction No restriction No restriction No restriction 3,0 3,0 3,0 1,8 3,0 0,25 0,25 Each other element 0,1 D   31 December 2031 1692 Passive compositions Other passive metallic materials for Product Group D           D   31 December 2031 1693 Hard brazing alloys and soft soldering alloys Hard brazing and soft soldering alloys meeting the maximum concentrations of the specified impurities       Pb Sb Cd 0,1 0,1 0,01 B - C taking on account the extension of the final surface that might be exposed to drinking water For capillary brazing/soldering of pipes and fittings. The application of these alloys is critical to how they will behave during use and certain combinations of brazing/soft soldering alloy and parent metals may result in significant release of certain metals into the drinking water. 31 December 2031 Notes : 1.    Note 1: Explanation of the notes in Tables 1 and 2 The meaning of the note provided in Tables 1 and 2 is as follows: A. Metallic composition category means a group of metallic compositions with the same metallic composition constituents, the same behaviour in contact with water intended for human consumption and the same restrictions with regard to water composition and/or surface area. A category has a reference material(s) with a controlled composition for which the metal releases are known and reproducible and represents the reasonable worst-case metal releases for the category. They are identified in the ECHA guidance. 2.    Note 2: MTC tap, metallics The MTC tap, metallics , used to assess the safety of the use of the compositions listed under Tables 1 and 2 are provided for information purposes under Annex V.

EUROPEAN POSITIVE LIST OF ORGANIC CONSTITUENTS OF CEMENTITIOUS MATERIALS

ANNEX IIISupplementary provisions

ANNEX III EUROPEAN POSITIVE LIST OF ORGANIC CONSTITUENTS OF CEMENTITIOUS MATERIALS Table 1 sets out (1) the different categories of generic constituents of cementitious materials that may be used in the preparation of cementitious mixtures and (2) establishes conditions of use for each category. Table 1 List of generic constituents of cementitious materials Generic constituent category Types of specific organic cementitious constituents within the scope of the European positive lists European positive list requirements Condition of use Cement Organic grinding aids or other organic substances used for the preparation of cement European positive list for cementitious materials   Inorganic additions Organic grinding aids or other organic substances used for the preparation of inorganic additions European positive list for cementitious materials   Aggregates Not relevant Not relevant   Mixing water Not relevant Not relevant   Organic additions Organic substances European positive list for organic materials European positive list for cementitious materials Starting substances that are authorised in the European positive list for organic materials which are authorised for use in the manufacture of coatings may be used to manufacture organic additions for use in cementitious materials Admixtures Organic substances European positive list for cementitious materials   Fibres Organic substances European positive list for organic materials Starting substances that are authorised in the European positive list for organic materials may be used to manufacture polymer fibres for use in cementitious materials Formwork release agents Organic substances European positive list for cementitious materials   Curing compounds Organic substances European positive list for cementitious materials   Table 2 Positive list of individual organic constituents for cementitious materials EUPL Number EC Number CAS Number Organic cementitious constituent name Generic constituent category Technical function Maximum Tolerable Concentration at the tap (MTC tap, cementitious ) in μg/l Total Maximum Tolerable Concentration at the tap (MTC(T) tap, cementitious ) in μg/l (A) Conditions of use Expiry date Value for the organic cementitious constituent Values for other relevant chemical species (B) 1694   514-10-3 abietic acid Admixtures           31 December 2028 1695   64-19-7 acetic acid Admixtures           31 December 2034 1696   108-24-7 acetic anhydride Admixtures           31 December 2034 1697   6419-19-8 aminotris(methylphosphonic acid) (ATMP) Admixtures   0,1 - expressed as amines       31 December 2031 1698   1002-89-7 ammonium stearate Admixtures       For ammonium, refer to Annex V.   31 December 2028 1699   577-11-7 anionic, docusate sodium Admixtures           31 December 2031 1700   85536-14-7 benzenesulfonic acid 4-C 10 -C 13 - sec -alk derivs Admixtures           31 December 2031 1701   2634-33-5 1,2-benzoisothiazol-3(2 H )-one (BIT) Admixtures, organic additions, formwork release agents Biocide 25     Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. 31 December 2034 1702   14548-60-8 benzylalcoholhemiformal Admixtures           31 December 2028 1703   120-32-1 2-benzyl-4-chloro phenol (Chlorophen) Admixtures, organic additions, formwork release agents Biocide       Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. 31 December 2028 1704   90-43-7 biphenyl-2-ol (2-phenylphenol) Admixtures, organic additions, formwork release agents Biocide       Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1705   52-51-7 2-brom-2-nitropropan–1,3 -diol (Bronopol) Admixtures, organic additions, formwork release agents Biocide       Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1706   123-95-5 butyl stearate Admixtures           31 December 2028 1707   544-17-2 calcium formate Admixtures           31 December 2031 1708   8061-52-7 calcium lignosulfonate Admixtures   12       31 December 2028 1709   1592-23-0 calcium stearate Admixtures           31 December 2031 1710   52627-73-3 capric acid (decanoic acid) Admixtures           31 December 2028 1711   124-07-2 caprylic acid (octanoic acid) Admixtures           31 December 2034 1712   9000-11-7 carboxy methyl cellulose Admixtures           31 December 2028 1713   9004-32-4 carboxy methyl cellulose, sodium salt Admixtures           31 December 2028 1714   9004-34-6 cellulose Admixtures           31 December 2028 1715   59-50-7 chlorocresol Admixtures, organic additions, formwork release agents Biocide       Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1716 911-418-6 55965-55-9 Reaction mass of 5-chloro-2-methyl-4-isothiazolin-3-one and 2-methyl-2 H -isothiazol-3-one (CIT/MIT) Admixtures, organic additions, formwork release agents Biocide 25     Mixture 5-chloro-2-methyl-2 H -isothiazol-3-one (75%) and 2-methyl-4-isothiazolin-3-one (25%). Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1717   77-92-9 citric acid (anhydrous) Admixtures           31 December 2034 1718   5949-29-1 citric acid, monohydrate Admixtures           31 December 2028 1719   61791-31-9 coconut diethanolamide (cocamide DEA) Admixtures           31 December 2028 1720   10016-20-3 cyclohexapentylose (α-dextrin) Admixtures           31 December 2034 1721   7585-39-9 β-dextrin Admixtures           31 December 2034 1722   14431-43-7 dextrin / maltodextrin Admixtures           31 December 2028 1723   50-70-4 D-glucitol (sorbitol) Admixtures           31 December 2028 1724   10222-01-2 2,2-dibromo-3-nitrilopropionamide (DBNPA) Admixtures, organic additions, formwork release agents Biocide       Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. 31 December 2028 1725   17603-42-8 2,3-dihydroxypropyl (dihydrogen phosphate), sodium salt Admixtures           31 December 2028 1726   39354-45-5 disodium dodecylethoxylate sulfosuccinate Admixtures           31 December 2028 1727   1643-20-5 dodecyldimethylamine oxide Admixtures           31 December 2031 1728   61791-26-2 ethoxylated tallow amine Admixtures   0,1 - expressed as amines       31 December 2028 1729   9004-57-3 cellulose, ethyl ether Admixtures           31 December 2028 1730   3586-55-8 (ethylenedioxy)-dimethanol Admixtures, organic additions, formwork release agents Biocide       Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1731   61790-12-3 fatty acids, tall oils Admixtures           31 December 2028 1732   50-00-0 formaldehyde Admixtures, organic additions, formwork release agents Biocide 750     Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. 31 December 2028 1733   64-18-6 formic acid Admixtures           31 December 2034 1734   4719-04-4 hexahydro-1 3,5-tris(hydroxyethyl)-s-triazine ( N -formal) Admixtures, organic additions, formwork release agents Biocide       Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1735   9004-62-0 cellulose, 2-​hydroxyethyl ether Admixtures           31 December 2028 1736   9032-42-2 cellulose, 2-​hydroxyethyl methyl ether Admixtures           31 December 2028 1737   37353-59-6 hydroxy methyl cellulose Admixtures           31 December 2028 1738   22987-21-9 hydroxyethyldiphosphonic acid Admixtures           31 December 2028 1739   8061-54-9 magnesium lignosulfonate Admixtures   12       31 December 2028 1740   68891-01-0 melamine formaldehyde, toluenesulfonamide polymer Admixtures           31 December 2034 1741   37206-01-2 methyl carboxy methyl cellulose Admixtures           31 December 2028 1742   9004-67-5 methyl cellulose Admixtures           31 December 2028 1743   9004-59-5 methyl ethyl cellulose Admixtures           31 December 2028 1744   9004-65-3 cellulose, 2-hydroxypropyl methyl ether (HPMC) Admixtures           31 December 2028 1745   2682-20-4 2-methyl-4-isothiazolin-3-one (MIT) Admixtures, organic additions, formwork release agents Biocide 25     Only to be used in aqueous polymer dispersions and emulsions. Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. 31 December 2034 1746   37293-74-6 naphthalenesulfonic acid, polymer with formaldehyde, calcium salt Admixtures           31 December 2034 1747   36290-04-7 2-naphthalenesulfonic acid, polymer with formaldehyde, sodium salt Admixtures           31 December 2028 1748   26530-20-1 2- n -octyl-4-isothiazolin-3-one (OIT) Admixtures, organic additions, formwork release agents Biocide 25     Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1749   112-80-1 oleic acid Admixtures           31 December 2028 1750   132-27-4 o -phenyl-phenate (OPP) Admixtures, organic additions, formwork release agents Biocide       Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1751   111-30-8 1,5-pentandial (glutaraldehyde) Admixtures, organic additions, formwork release agents Biocide       Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1752   37971-36-1 2-phosphono-butane 1,2,4-tricarboxylic acid Admixtures           31 December 2031 1753   97105-14-1 polycarboxylic acid salt type surfactant Admixtures           31 December 2037 1754   68412-53-3 polyethylene glycol branched nonylphenyl ether phosphate Admixtures           31 December 2037 1755   37205-87-1 polyethylene glycol nonylphenyl ether Admixtures           31 December 2028 1756   72283-35-3 polyoxyalkylene alkylether fatty acid Admixtures   1500       31 December 2034 1757   73667-50-2 polysaccharide, succinoglycan Admixtures         Exopolysaccharide, derived from fermentation of agrobacterium tumefaciens . 31 December 2037 1758   96949-22-3 polysaccharide, Welan gum Admixtures         Exopolysaccharide, derived from fermentation of alcaligenes . 31 December 2034 1759   143-18-0 potassium oleate Admixtures           31 December 2028 1760   6381-59-5 304-59-6 potassium sodium tartrate Admixtures           31 December 2031 1761   3811-73-2 pyridine-2-thiol 1-oxide, sodium salt Admixtures, organic additions, formwork release agents Biocide       Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1762   127-09-3 sodium acetate Admixtures           31 December 2031 1763   15733-22-9 sodium p -chloro- m -cresolate Admixtures, organic additions, formwork release agents Biocide       Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1764   13150-00-0 sodium 2-,2-,2-dodecyloxy ethoxy ethyl sulfate Admixtures   1500       31 December 2028 1765   141-53-7 sodium formate Admixtures           31 December 2031 1766   31138-65-5 sodium glucoheptonate Admixtures           31 December 2031 1767   527-07-1 sodium gluconate Admixtures           31 December 2037 1768   137-16-6 sodium N -lauroylsarcosinate Admixtures           31 December 2031 1769   151-21-3 sodium n -dodecyl sulfate Admixtures           31 December 2031 1770   8061-51-6 sodium lignosulfonate Admixtures   12       31 December 2028 1771   9084-06-4 sodium naphthalene sulfonic acid Admixtures           31 December 2028 1772   61790-51-0 sodium resinate Admixtures           31 December 2031 1773   9005-25-8 starch, edible Admixtures           31 December 2028 1774   9049-76-7 starch hydroxypropyl ether Admixtures           31 December 2028 1775   57-11-4 stearic acid Admixtures           31 December 2034 1776   57-50-1 sucrose Admixtures           31 December 2028 1777   68131-32-8 sulfite liquors (calcium lignosulfonate) Admixtures   12       31 December 2028 1778   85586-07-8 sulfuric acid, mono-C 12 -C 14 -alkyl esters, sodium salts Admixtures   1500       31 December 2031 1779   64787-97-9 sulfurous acid, monosodium salt, polymer with formaldehyde and 1,3,5-triazine-2,4,6-triamine Admixtures           31 December 2037 1780   8029-43-4 syrups, hydrolysed starch Admixtures           31 December 2037 1781   68131-37-3 syrups, hydrolysed starch, dehydrated Admixtures           31 December 2028 1782   68425-17-2 syrups, hydrolysed starch, hydrogenated Admixtures         Sorbitol (2-5 %), maltitol (9-14 %) and maltotritol (11-16 %). This mixture also contains 67-76 % hydrogenated oligosaccharides in compliance with the purity criteria for maltitol syrup E965(ii) as laid down in Commission Regulation (EU) No 231/2012. 31 December 2034 1783   65997-01-5 tall oil, sodium salt Admixtures           31 December 2031 1784   67701-06-8 tallow oleine Admixtures           31 December 2031 1785   533-74-4 tetrahydro–3,5 -dimethyl-1,3,5-thiadiazine-2-thione Admixtures, organic additions, formwork release agents Biocide       Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. 31 December 2028 1786   9014-85-1 2,4,7,9-tetramethyl-5-decyne–4,7 -diol, ethoxylated Admixtures           31 December 2034 1787   126-71-6 triisobutyl phosphate Organic additions           31 December 2031 1788   102-71-6 triethanolamine (2,2,2-nitrilotriethanol) Admixtures, grinding aids   2,5 - expressed as the sum of triethanolamine and the hydrochloride adduct expressed as triethanolamine       31 December 2034 1789   2943-75-1 triethoxyoctylsilane Admixtures           31 December 2031 1790   9014-63-5 xylan (rosin wood) Admixtures           31 December 2028 1791   107-21-1 ethane–1,2 -diol         1500 - expressed as ethyleneglycol.   31 December 2034 1792   11138-66-2 xanthan gum Admixtures         Maximum dosage = 0,15 % (w/w) in concrete. 31 December 2028 1793   111-42-2 2,2'-iminodiethanol Admixtures         Maximum dosage = 0,004 % (w/w) in concrete. 31 December 2031 1794   111-46-6 diethylene glycol         1500 - expressed as ethyleneglycol   31 December 2034 1795   122-20-3 triisopropanolamine (1,1',1''-nitrilopropane-2-ol) (TIPAL)     250       31 December 2034 1796   141-43-5 2-aminoethanol     2,5     Maximum dosage = 0,004 % (w/w) in concrete. 31 December 2034 1797   15214-89-8 2-acrylamido-2-methylpropanesulfonic acid     2,5       31 December 2034 1798   25322-69-4 polypropylene glycol             31 December 2034 1799   55965-84-9 Reaction mass of 5-chloro-2-methyl–1,2 -thiazol-3(2 H )-one and 2-methyl-1,2-thiazol-3(2 H )-one (3:1) (CIT/MIT) Admixtures, organic additions, formwork release agents Biocide       Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. 31 December 2034 1800   56-81-5 glycerol             31 December 2034 1801   57-13-6 urea             31 December 2034 1802   87-69-4 tartaric acid Admixtures           31 December 2034 1803   9002-89-5 polyvinyl alcohol Organic additions           31 December 2037 1804   108-78-1 2,4,6-triamine-1,3,5-triazine     125     Maximum dosage = 0,004 % (w/w) in concrete. 31 December 2028 1805   126-73-8 tributyl phosphate Admixtures, organic additions, formwork release agents Defoamer       Maximum dosage = 0,004 % (w/w) in concrete. 31 December 2028 1806   141-22-0 ricinoleic acid     2100       31 December 2028 1807   144-62-7 oxalic acid     300       31 December 2034 1808   60-00-4 edetic acid (EDTA)           Maximum dosage = 0,004 % (w/w) in concrete. 31 December 2034 1809   68412-29-3 hydrolysed starch           Maximum dosage = 0,15 % (w/w) in concrete. 31 December 2028 1810   9000-65-1 tragacanth gum           Maximum dosage = 0,2 % (w/w) in concrete. 31 December 2028 1811   2478-10-6 4-hydroxybutylacrylate Organic additions           31 December 2031 1812   9003-01-4 polyacrylic acid Organic additions           31 December 2031 1813   9003-11-6 poly(ethylenepropylene)glycol Admixtures           31 December 2037 1814   100-42-5 styrene             31 December 2028 1815   1007848-63-6 tert -decanoic acid, ethenyl ester, polymer with ethene, ethenyl acetate and methyl 2-methyl-2-propenoate Organic additions           31 December 2034 1816   100-97-0 hexamethylentetramine         750 - expressed as formaldehyde   31 December 2034 1817   102782-43-4 alcohols, C 9 -C 11 , branched and linear, ethoxylated propoxylated Admixtures           31 December 2028 1818   103-11-7 2-ethylhexyl acrylate     2,5       31 December 2034 1819   10378-23-1 mercaptoethanol Admixtures           31 December 2028 1820   104-76-7 2-ethyl-1-hexanol Admixtures   1500       31 December 2034 1821   105-59-9 N -methyl diethanolamine Admixtures           31 December 2031 1822   106-91-2 2,3-epoxypropyl methacrylate     1,0       31 December 2028 1823   106-99-0 butadiene     0,1       31 December 2028 1824   107-13-1 acrylonitrile     0,1       31 December 2028 1825   107-96-0 mercaptopropionic acid Admixtures           31 December 2031 1826   108-05-4 acetic acid, vinyl ester     600       31 December 2028 1827   108-31-6 maleic anhydride         1500 - expressed as maleic acid.   31 December 2034 1828   110-16-7 maleic acid         1500 – expressed as maleic acid.   31 December 2034 1829   110-63-4 1,4-butanediol     250 - expressed as 1,4-butanediol.       31 December 2034 1830   110-97-4 1,1'-iminodipropan-2-ol Admixtures           31 December 2031 1831   111-82-0 methyl laurate             31 December 2031 1832   111-90-0 2-(2-ethoxyethoxy)ethanol Admixtures           31 December 2031 1833   112-27-6 triethyleneglycol             31 December 2034 1834   112-30-1 decan-1-ol             31 December 2034 1835   112-34-5 diethylene glycol monobutyl ether Admixtures           31 December 2034 1836   112-92-5 octadecan-1-ol             31 December 2031 1837   119-47-1 6,6'-di- tert -butyl-2,2'-methylenedi- p -cresol Admixtures   75       31 December 2028 1838   122-96-3 piperazine–1,4 -diethanol Admixtures           31 December 2031 1839   123-31-9 hydroquinone     30       31 December 2028 1840   125005-87-0 diutan gum Admixtures           31 December 2031 1841   126-30-7 2,2-dimethyl–1,3 -propanediol     2,5       31 December 2034 1842   126-86-3 2,4,7,9-tetramethyldec-5-in–4,7 -diol Admixtures           31 December 2031 1843   128-37-0 2,6-di- tert -butyl- p -cresol Organic additions   150       31 December 2034 1844   1338-41-6 sorbitan monostearate             31 December 2034 1845   13463-41-7 zinc, bis(1-hydroxy-2(1 H )-pyridinethionato-O,S)-, (T-4)- Organic additions   0,1   For zinc, refer to Annex V.   31 December 2028 1846   140-88-5 ethyl acrylate         300 - expressed as acrylic acid.   31 December 2034 1847   141-32-2 butyl acrylate         300 - expressed as acrylic acid.   31 December 2034 1848   141-78-6 ethyl acetate             31 December 2034 1849   142-31-4 sodium octyl sulfate             31 December 2031 1850   142-87-0 sodium decyl sulfate             31 December 2031 1851   143-19-1 9-octadecenoic acid (9Z)-, sodium salt (1:1) Admixtures, organic additions, formwork release agents Additive for formwork release agents         31 December 2028 1852   143-22-6 2-(2-(2-butoxyethoxy)ethoxy)ethanol Admixtures           31 December 2031 1853   150413-26-6 poly(oxy–1,2 -ethanediyl), .alpha.-sulfo-.omega.-(isotridecyloxy)-, sodium salt (1:1) Admixtures           31 December 2037 1854   150-76-5 hydroquinone methylether Admixtures           31 December 2031 1855   15763-76-5 sodium p -cumenesulfonate Admixtures           31 December 2031 1856   1663-39-4 tert -butyl acrylate         300 - expressed as acrylic acid.   31 December 2034 1857   1879-09-0 2,4-dimethyl-6- tert -butyl-phenol Admixtures           31 December 2031 1858   204336-40-3 oxirane, methyl-,polymer with oxirane, mono(3,5,5-trimethylhexyl) ether Admixtures           31 December 2034 1859   2146-71-6 vinyl laurate (dodecanoic acid, ethenyl ester) Organic additions           31 December 2034 1860   2373-38-8 butanedioic acid, sulfo-, 1,4-bis(1,3-dimethylbutyl) ester, sodium salt Organic additions           31 December 2031 1861   2425-77-6 2-hexyldecan-1-ol Admixtures           31 December 2031 1862   24800-44-0 tripropyleneglycol             31 December 2034 1863   24937-78-8 acetic acid ethenyl ester, polymer with ethene Organic additions           31 December 2034 1864   25190-52-7 polypropyleneglycol stearate Admixtures           31 December 2037 1865   25584-83-2 hydroxypropyl acrylate Admixtures           31 December 2031 1866   26172-55-4 5-chloro-2-methyl-2 H -isothiazol-3-one Admixtures, organic additions, formwork release agents Biocide       Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. 31 December 2028 1867   26221-27-2 poly(vinyl alcohol-co-ethylene) Organic additions           31 December 2037 1868   26399-02-0 2-ethylhexyl oleate Organic additions           31 December 2031 1869   27813-02-1 2-​propenoic acid, 2-​methyl-​, monoester with 1,​2-​propanediol Admixtures           31 December 2031 1870   28098-03-5 octanoic acid, compound with 2-aminoethanol (1:1) Admixtures, organic additions, formwork release agents Additive for formwork release agents         31 December 2028 1871   29736-24-1 acetic acid, 2-hydroxy-2sulfo-, sodium salt (1:2) Organic additions           31 December 2031 1872   353752-63-3 2-propenoic acid, homopolymer, ester with α-methyl-ω-hydroxypoly(oxy–1,2 -ethanediyl), graft Organic additions           31 December 2037 1873   36653-82-4 hexadecan-1-ol             31 December 2034 1874   37208-08-5 hydroxybutylcellulose Admixtures           31 December 2028 1875   300-92-5 aluminium distearate         For aluminium, refer to Annex V.   31 December 2031 1876   4402-30-6 2-​propanol, 1,​1'-​(methylimino)​bis- Admixtures           31 December 2031 1877   50-81-7 ascorbic acid             31 December 2028 1878   50985-38-1 poly(oxy–1,2 -ethanediyl), .alpha.-(4-hydroxybutyl)-.omega.-hydroxy Admixtures           31 December 2034 1879   513-42-8 2-methyl-2-propen-1-ol Admixtures           31 December 2031 1880   51668-30-5 oxirane, methyl-, polymer with oxirane, octadecanoate Admixtures           31 December 2037 1881   52383-89-8 dodecanoic acid, ethenyl ester, polymer with chloroethene and ethene Organic additions           31 December 2037 1882   52668-97-0 oleic acid-polyethyleneglycol-diester Admixtures           31 December 2037 1883   52933-07-0 phosphoric acid, isotridecyl ester Admixtures           31 December 2028 1884   5395-50-6 tetrahydro-1,3,4,6-tetrakis(hydroxymethyl) imidazo[4,5-d]imidazole–2,5 (1H,3H)-dione Organic additions           31 December 2031 1885   541-02-6 decamethylcyclopentasiloxane Admixtures           31 December 2028 1886   544-63-8 myristic acid             31 December 2028 1887   55406-53-6 3-iodo-2-propynyl butylcarbamate Admixtures, organic additions, formwork release agents Biocide       Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1888   556-67-2 octamethylcyclotetrasiloxane Admixtures           31 December 2028 1889   557-05-1 zinc distearate   Water repellent     For zinc, refer to Annex V.   31 December 2031 1890   5625-90-1 N , N '-methylenebismorpholine Admixtures, organic additions, formwork release agents Biocide 0,1     Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. 31 December 2028 1891   56-87-1 L-lysin             31 December 2037 1892   595585-15-2 D-glucurono-D-gluco-6-deoxy-L-mannan, acetate, calcium magnesium potassium sodium salt Admixtures           31 December 2028 1893   61791-14-8 amines, coco alkyl, ethoxylated Admixtures           31 December 2028 1894   63330-34-7 tert -decanoic acid, ethenyl ester, polymer with ethene and ethenyl acetate Organic additions           31 December 2034 1895   64-17-5 ethanol             31 December 2034 1896   64742-47-8 distillates (petroleum), hydrotreated light Formwork release agents           31 December 2031 1897   64742-48-9 naphtha (petroleum), hydrotreated heavy; low boiling point hydrogen treated naphtha Formwork release agents   0,1       31 December 2028 1898   64742-95-6 solvent naphtha (petroleum), light arom. Formwork release agents   0,1       31 December 2028 1899   65997-04-8 rosin, fumarated Admixtures           31 December 2031 1900   6683-19-8 pentaerythritol tetrakis[3-(3,5-di- tert -butyl-4-hydroxyphenyl)-propionate]             31 December 2034 1901   67-56-1 methanol             31 December 2034 1902   67-63-0 2-propanol             31 December 2034 1903   68442-68-2 benzenamine, N -phenyl-, styrenated Organic additions           31 December 2031 1904   69011-36-5 isotridecanol, ethoxylated Admixtures           31 December 2031 1905   71-36-3 1-butanol             31 December 2034 1906   72121-88-1 D-glucopyranuronic acid, polymer with 6-​deoxy-​L-​mannose, D-​glucose and D-​mannose, calcium potassium sodium salt (Welan gum) Admixtures           31 December 2037 1907   74-85-1 ethene Admixtures           31 December 2034 1908   75-21-8 ethylene oxide     0,1       31 December 2028 1909   75-91-2 tert -butyl hydroperoxide (TBHP) Organic additions           31 December 2028 1910   78041-14-2 oxirane, methyl-, polymer with oxirane, ether with 1,2,3-propanetriol (3:1), (9Z)-9-octadecenoate Admixtures           31 December 2037 1911   78-51-3 tributoxyethyl phosphate Admixtures, organic additions, formwork release agents Defoamer       Maximum dosage = 0,5 % (w/w) based on the addition or admixture. 31 December 2031 1912   79-06-1 acrylamide     0,1       31 December 2028 1913   79-10-7 acrylic acid         300 - expressed as acrylic acid.   31 December 2034 1914   79-39-0 methacrylamide     0,1       31 December 2034 1915   79-41-4 methacrylic acid         300 – expressed as methacrylic acid.   31 December 2034 1916   8002-13-9 rape oil             31 December 2028 1917   8015-86-9 carnauba wax             31 December 2028 1918   8028-48-6 orange, sweet, extract Admixtures           31 December 2031 1919   8028-89-5 caramel (color) Admixtures           31 December 2031 1920   8042-47-5 white mineral oil (petroleum) Curing compounds           31 December 2031 1921   80-62-6 methacrylic acid, methyl ester         300 - expressed as methacrylic acid.   31 December 2034 1922   818-61-1 acrylic acid, monoester with ethyleneglycol         300 - expressed as acrylic acid.   31 December 2034 1923   82973-76-0 poly(oxy–1,2 -ethanediyl), a,a'-(2,2-dimethyl–1,3 -propanediyl)bis[w-hydroxy- Admixtures           31 December 2028 1924   868-18-8 sodium tartrate Admixtures           31 December 2031 1925   868-77-9 2-hydroxyethyl methacrylate         300 - expressed as methacrylic acid.   31 December 2034 1926   9003-20-7 acetic acid ethenyl ester, homopolymer Organic additions           31 December 2037 1927   9003-39-8 polyvinylpyrrolidone             31 December 2037 1928   9004-58-4 cellulose, ethyl 2-hydroxyethyl ether Admixtures           31 December 2028 1929   9004-64-2 cellulose, 2-hydroxypropyl ether Admixtures           31 December 2028 1930   9004-74-4 poly(oxy–1,2 -ethanediyl), α-methyl-ω-hydroxy- Admixtures           31 December 2037 1931   9004-82-4 sodium lauryl ether sulfate Admixtures           31 December 2028 1932   9005-00-10 stearyl alcohol, ethoxylate (2 EO) Admixtures           31 December 2031 1933   9005-65-6 polyethyleneglycol sorbitan monooleate             31 December 2028 1934   9032-46-6 cellulose, 2-sulfoethyl ether Admixtures           31 December 2028 1935   9036-19-5 (1,1,3,3-tetramethylbutyl)-phenyl-polyethylenglycol Admixtures           31 December 2028 1936   9043-30-5 isotridecanol, ethoxylated Admixtures           31 December 2028 1937   923-02-4 N -(hydroxymethyl)methacrylamide     2,5       31 December 2034 1938   925-60-0 acrylic acid, propylester         300 - expressed as acrylic acid.   31 December 2028 1939   96-33-3 acrylic acid, methyl ester         300 - expressed as acrylic acid.   31 December 2034 1940   97-65-4 itaconic acid             31 December 2034 1941   999-61-1 2-hydroxypropyl acrylate     2,5 - expressed as the sum of acrylic acid, 2-hydroxypropyl ester and acrylic acid, 2-hydroxy-isopropyl ester.       31 December 2028 1942     acetic acid ethenyl ester, polymer with ethene, sodium 2-methyl-2-[(1-oxo-2-propen-1-yl)amino]-1- propanesulfonate and ethenyl tert -decanoate Organic additions           31 December 2034 1943     acrylic acid and methacrylic acid ester of dihydric aliphatic alcohols with chain length C 2 -C 18 Admixtures           31 December 2028 1944     fatty alcohol ethoxylate Admixtures           31 December 2028 1945     polyethylenglycol ether (EO = 1-50) of linear and branched primary alcohols Admixtures           31 December 2028 1946     vinyl ether of monohydric aliphatic saturated alcohols with chain length C 1 -C 18 Admixtures           31 December 2028 1947     isothiazolinone Admixtures, organic additions, formwork release agents Preservative       Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. 31 December 2028 Table 3 European positive lists of groups of organic constituents for cementitious materials EUPL Number EC Number CAS Number Organic cementitious constituent name group name Generic constituent category Technical function Maximum Tolerable Concentration at the tap (MTC tap, cementitious ) (μg/l) Total Maximum Tolerable Concentration at the tap (MTC(T) tap, cementitious ) in μg/l (A) Conditions of use Expiry date Value for the organic cementitious constituent Values for other relevant chemical species 1948   68439-45-2 alcohols, C 6 -C 12 , ethoxylated Admixtures           31 December 2031 1949   68439-50-9 alcohols, C 12 -C 14 , ethoxylated Admixtures   1500       31 December 2031 1950   68551-12-2 alcohols, C 12 -C 16 , ethoxylated Admixtures   1500       31 December 2031 1951   96130-61-9 alcohols, C 9 -C 11 ethoxylated sulfates, sodium salts Admixtures   1500       31 December 2031 1952   68585-34-2 alcohols, C 10 -C 16 , ethoxylated, sulfates, sodium salts Admixtures   1500       31 December 2031 1953   68891-38-3 alcohols, C 12 -C 14 , ethoxylated, sulfates, sodium salts Admixtures   1500       31 December 2031 1954   126950-60-5 alcohols, C 12 -C 14 , secondary Admixtures   1500       31 December 2031 1955   84133-50-6 alcohols, C 12 -C 14 , secondary ethoxylated Admixtures   250       31 December 2031 1956   68439-57-6 alkene (sulfonic acid, C 14 -C 16 -alkane hydroxy & C 14 -C 1 6-alkene sodium salts) Admixtures   1500       31 December 2031 1957   25155-30-0 alkyl aryl sulfonate (sodium dodecylbenzenesulfonate) Admixtures   1500       31 December 2031 1958   85117-50-6 alkyl benzene sulfonate, sodium (mono C 10 -C 14 -alkyl derivatives sodium) Admixtures   1500       31 December 2031 1959   70592-80-2 & 1643-20-5 alkyl dimethylamine oxide Admixtures   1500       31 December 2031 1960   68585-47-7 alkyl sulfate, sodium (mono C 10 -C 16 -alkyl esters) Admixtures   1500       31 December 2031 1961   68411-30-3 alkylaryl sulfonate (benzenesulfonic acid, C 10 -C 13 derivs, sodium) Admixtures   1500       31 December 2031 1962   68154-99-4 alkylpolyethoxypolypropoxy benzylether Admixtures           31 December 2034 1963   7360-53-4 aluminium formate Admixtures       For aluminium, refer to Annex V.   31 December 2031 1964   61788-90-7 amines, coco alkyldimethyl, N-oxides Admixtures   0,1 - expressed as amines       31 December 2031 1965   72906-11-7 alkyl sulfate sodium (mono C 9 -C 13 alkyl esters) Admixtures   300       31 December 2031 1966   68784-08-7 butanedioic acid, sulfo-, C-(2-coco amidoethyl) esters, disodium salts Admixtures           31 December 2031 1967   68603-42-9 coconut diethanolamide (coco N , N -bis hydroxyethyl) Admixtures           31 December 2031 1968   84712-53-8 N -coco sulfosuccinamate, disodium (butanoic acid,4-amino-4-oxy-2-sulfo-, N -coco alkyl derivs) Admixtures           31 December 2031 1969   67762-90-7 dimethyl siloxane reaction products with silica Admixtures           31 December 2031 1970   67701-03-5 fatty acids, C 16 -C 18 (stearic acid) Admixtures           31 December 2031 1971   61791-08-0 fatty acids, coco, reaction products with ethanolamine, ethoxylated Admixtures           31 December 2031 1972   50-99-7 glucose Admixtures           31 December 2031 1973   50-21-5 lactic acid Admixtures           31 December 2034 1974   91078-68-1 naphthalenesulfonic acids, reaction products with formaldehyde, sodium salts Admixtures           31 December 2031 1975   68002-63-1 quaternary ammonium, C 14 -C 18 , alkyltrimethyl chlorides Admixtures   300   For ammonium, refer to Annex V.   31 December 2031 1976   61789-40-0 quaternary ammonium compounds, (carboxymethyl)(3-cocoamidopropyl)dimethyl-hydroxides, inner salts Admixtures   300   For ammonium, refer to Annex V.   31 December 2031 1977   73138-82-6, 61790-51-0 resin acids and rosin acids Admixtures           31 December 2031 1978   8050-09-7 rosin Admixtures           31 December 2034 1979   91648-56-5 sodium dodecyl to pentadecyl ether sulfonates Admixtures   1500       31 December 2031 1980   25322-68-3 polyethylene glycol             31 December 2034 1981   57-55-6 propane–1,2 -diol (1,2 propylene glycol)             31 December 2034 1982   75-56-9 propylene oxide     0,1       31 December 2028 1983   107-22-2 glyoxal             31 December 2028 1984   1000817-22-0 fatty acids, C 8 -C 18 and C 18 -unsatd., reaction products with diethanolamine and propylene oxide Admixtures, organic additions, formwork release agents Additive for formwork release agents         31 December 2031 1985   103818-93-5 alcohols, C 9 -C 11 , ethoxylated propoxylated Admixtures           31 December 2031 1986   1400790-00-2 alcohols, C 9 -C 11 -branched, ethoxylated propoxylated Admixtures           31 December 2031 1987   169107-21-5 alcohols, C 9 -C 11 -branched, ethoxylated Admixtures           31 December 2031 1988   25085-46-5 acetic acid ethenyl ester, polymer with chloroethene and ethene Organic additions           31 December 2037 1989   25213-24-5 acetic acid ethenyl ester, polymer with ethenol Admixtures         MW > 1 000 Da. 31 December 2034 1990   25265-71-8 1,1'-oxydi-2-propanol, mixture of isomers Organic additions           31 December 2034 1991   4080-31-3 3,5,7-triaza-1-azoniatricyclo[3.3.1.13,7]decane,1-(3-chloro-2-propenyl)-, chloride     15       31 December 2031 1992   63148-62-9 polydimethylsiloxane Admixtures, organic additions, formwork release agents Defoamer       Maximum dosage = 0,5 % (w/w) based on the addition or admixture. 31 December 2034 1993   64742-52-5 distillates (petroleum), hydrotreated heavy naphthenic; base oil — unspecified Formwork release agents   0,1       31 December 2028 1994   64742-53-6 distillates (petroleum), hydrotreated light naphthenic; base oil — unspecified Formwork release agents   0,1       31 December 2028 1995   64742-55-8 distillates (petroleum), hydrotreated light paraffinic Curing compounds   0,1       31 December 2028 1996   64742-56-9 distillates (petroleum), solvent-dewaxed light paraffinic; base oil — unspecified Formwork release agents   0,1       31 December 2028 1997   66455-15-0 alcohol, C 10 -C 14 , ethoxylated Admixtures           31 December 2031 1998   67701-01-3 fatty acid, C 12 -C 18             31 December 2031 1999   67701-05-7 fatty acid, C 16 -C 18 and C 18 -unsaturated Admixtures, organic additions, formwork release agents Additive for formwork release agents         31 December 2031 2000   67701-08-0 fatty acids, C 8 -C 18 and C 18 -unsaturated Admixtures, organic additions, formwork release agents Additive for formwork release agents         31 December 2031 2001   67701-26-2 glycerides, C 12 -C 18 (triglycerides C 12 -C 18 (even numbered)) Admixtures, organic additions, formwork release agents Additive for formwork release agents         31 December 2031 2002   68131-39-5 alcohols, C 12 -C 15 , ethoxylated Admixtures           31 December 2031 2003   68131-40-8 alcohols, C 11 -C 15 -secondary, ethoxylated Admixtures           31 December 2031 2004   68154-97-2 alcohols, C 10 -C 12 , ethoxylated propoxylated Admixtures           31 December 2031 2005   68439-46-3 alcohols, C 9 -C 11 , ethoxylated Admixtures           31 December 2031 2006   68439-49-6 polyethyleneglycol (EO = 1-50) ethers of linear and branched primary (C 8 -C 22 ) alcohols             31 December 2034 2007   68476-78-8 molasses Admixtures           31 December 2031 2008   68526-86-3 alcohols, C 11 -C 14 -Iso Admixtures           31 December 2031 2009   68551-07-5 alcohols, C 8 -C 18 Admixtures           31 December 2031 2010   68611-44-9 silane, dichlorodimethyl-, reaction products with silica             31 December 2031 2011   68920-66-1 alcohols, C 16 -C 18 and C 18 -unsatd., ethoxylated Admixtures           31 December 2031 2012   68954-91-6 poly(oxy–1,2 -ethanediyl), α-(3-carboxy-1-oxosulfopropyl)-ω-hydroxy-, C 10 -C 12 -alkyl ethers, disodium salts Admixtures           31 December 2037 2013   69013-18-9 alcohols, C 8 -C 18 , ethoxylated propoxylated Admixtures           31 December 2031 2014   69227-21-0 alcohols, C 12 -C 18 , ethoxylated propoxylated Admixtures           31 December 2031 2015   70955-07-6 alcohols, tallow, propoxylated Admixtures           31 December 2031 2016   71786-60-2 ethanol, 2,2'-iminobis-, N -C 12 -C 18 -alkyl derivs. Admixtures, organic additions, formwork release agents Additive for formwork release agents         31 December 2031 2017   78330-21-9 alcohols, C 11 -C 14 -iso-, C 13 -rich, ethoxylated Admixtures           31 December 2031 2018   8002-74-2 paraffin waxes and hydrocarbon waxes Organic additions           31 December 2031 2019   85409-27-4 resin acid Admixtures           31 December 2031 2020   85586-25-0 rapeseed oil methyl ester             31 December 2031 2021   93-83-4 N , N -bis(2-hydroxyethyl)oleamide Admixtures, organic additions, formwork release agents Additive for formwork release agents         31 December 2031 2022   97043-91-9 alcohols, C 9 -C 16 , ethoxylated Admixtures           31 December 2031 rapidmeent     fatty acid polyglycol esters             31 December 2034 2024     methallylsulfonic acid, salts     0,25       31 December 2031 2025     polycarboxylate ether made of a combination of the following — acrylic acid (CAS No. 79-10-7), and/or — poly(oxy–1,2 -ethanediyl), α-[4-(ethenyloxy)butyl]-ω-hydroxy- (CAS No. 126682-74-4), and/or — poly(oxy–1,2 -ethanediyl), α-(3-methyl-3-buten-1-yl)-ω-hydroxy- (CAS No. 110412-77-6), and/or — hydroxypropylacrylate (CAS No. 25584-83-2), and/or — polyethylene glycol monomethallylether (CAS No. 31497-33-3) Admixtures     poly(oxy–1,2 -ethanediyl), α-(3-methyl-3-buten-1-yl)-ω-hydroxy- (CAS No. 110412-77-6) MTC tap = 1 μg/l isoprenol MTC tap = 2,5 μg/l   Oligomers < 1000 Da < 1 %; residual contents of acrylic acid < 0,05 %; hydroxypropyl acrylate (CAS No. 25584-83-2) < 0,0025 %; ethylene oxide (CAS No.75-21-8) < 0,0005 %. 31 December 2034 2026     melamine sulfonates Admixtures           31 December 2031 2027     naphthalene sulfonates Admixtures           31 December 2031 2028     substances releasing formaldehyde Admixtures, organic additions, formwork release agents Preservative       Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. 31 December 2031 Notes : 1.    Note 1: Explanation of the notes in Tables 2 and 3 i. The meaning of the notes provided in Tables 2 and 3 is as follows: A. Total Maximum Tolerable Concentration at the tap (MTC(T) tap, cementitious ) means the maximum permitted concentration of specified substances migrating from cementitious materials into water intended for human consumption as total of the element or ion indicated in Annex 5. B. Relevant chemical species are those identified in accordance with Section 3, Annex IV to Commission Implementing Decision (EU) 2024/365. 2.    Note 2: Scope of an authorisation i. Where an organic cementitious constituent appearing on the list as an individual entry is also covered by a group entry, the conditions of use and specifications and expiry dates applying to this organic cementitious constituent shall be those indicated in the individual entry exclusively. ii. Where a organic cementitious constituent appears on the list as its anhydrous form, its approval shall be considered to covers its hydrated form. iii. Unless stated otherwise in Tables 2 and 3, the following salts of authorised acids, phenols and alcohols shall be considered covered by that authorisation: aluminium, ammonium, barium, calcium, cobalt, copper, europium, gadolinium, iron, lanthanum lithium, magnesium, manganese, potassium, sodium, terbium, and zinc. This is subject to compliance with the corresponding MTC tap, cementitious value for the element or ion which is the same as shown in Annex V for cementitious materials. In certain cases, where the safety assessment indicates concerns on the use of the free acids, only the salts should be authorised by indicating in the list the name as ‘… acid(s), salts’. iv. For the purposes of the first European positive list of organic cementitious constituents, polymers used as constituents of admixtures which are exclusively manufactured with authorised monomers shall be considered covered by those authorisations. v. After the first European positive list of organic cementitious constituents, in the case of polymer, the entry in the European positive list shall be for the monomer(s) and other reactant(s) used in the polymer, and polymers manufactured from authorised monomer(s) and other reactant(s) shall be considered to be covered by these entries. vi. In the case of polymers used as constituents of fibres or additives, points v to viii of Section 2 of Annex I shall apply mutatis mutandi . vii. Fibres made of metallic compositions approved on the European positive list for metallic materials, are also authorised for use in cementitious materials. viii. An entry in Table 1 covers a nanoform only when it is explicitly stated in the approval of that entry. 3.    Note 3: Additional conditions of use i. Only biocidal active substances of Product-type 6 (Preservatives for products during storage) in accordance with Regulation (EU) No 528/2012 may be used as organic cementitious constituents.

EUROPEAN POSITIVE LIST OF COMPOSITIONS OF ENAMELS, CERAMIC AND OTHER INORGANIC MATERIALS

ANNEX IVSupplementary provisions

ANNEX IV EUROPEAN POSITIVE LIST OF COMPOSITIONS OF ENAMELS, CERAMIC AND OTHER INORGANIC MATERIALS Table 1 European positive lists of compositions of enamels, ceramics and other inorganic materials EUPL Number Material category Material sub-category Accepted composition Accepted inorganic composition constituents Relevant chemical species to be analysed in the migration waters (A) Maximum Tolerable Concentration at the tap for relevant chemical species (MTC tap, inorganic ) in μg/l (A) Conditions of use Expiry date Constituent identity Minimum concentration (% w/w) Maximum concentration (% w/w) 2029 Enamel Enamel Enamel SiO 2 25 80 Al, B, Ba, Cd, Ce, Co, Cr, Cu, Li, Mn, Mo, Ni, Pb, Sb, Sr, Ti, Zr For elements, refer to Annex V.   31 December 2031 B 2 O 3 0 20 Na 2 O 0 30 K 2 O 0 10 Li 2 O 0 10 CaO 0 10 BaO 0 15 SrO 0 5,0 Sb 2 O 3 0 1,0 MgO 0 5,0 CeO 2 0 15 ZnO 0 10 Al 2 O 3 0 5,0 CoO 0 5,0 NiO 0 3,0 CuO 0 3,0 MnO 2 0 5,0 Fe 2 O 3 0 5,0 MoO 3 0 5,0 P 2 O 5 0 5,0 SnO 2 0 5,0 TiO 2 0 16 ZrO 2 0 30 F 0 10 Cr 2 O 3 0 3,0 2030 Enamel Glasses Borosilicate glass SiO 2 80 100 Al, B, Cd, Pb For elements, refer to Annex V.   31 December 2031 B 2 O 3 7,0 13 Al 2 O 3 0 2,4 Na 2 O 0 2,0 K 2 O 0 2,0 2031 Enamel Glasses Soda-lime glass SiO 2 60 85 Al, B, Ba, Cd, Ce, Co, Cr, Cu, Mn, Mo, Ni, Pb, Sb, Sr, Ti, Zr For elements, refer to Annex V.   31 December 2031 B 2 O 3 0 15 Al 2 O 3 0 10,0 Na 2 O 0 15 K 2 O 0 5,0 CaO 0 15 MgO 0 5,0 BaO 0 5,0 SrO 0 1,0 Sb 2 O 3 0 1,0 CeO 2 0 1,0 CoO 0 1,0 NiO 0 1,0 CuO 0 1,0 MnO 2 0 1,0 Fe 2 O 3 0 1,0 MoO 3 0 1,0 SnO 2 0 1,0 TiO 2 0 1,0 ZrO 2 0 1,0 Cr 2 O 3 0 1,0 2032 Ceramics Oxide ceramics Al 2 O 3 and SiO 2 ceramics Al 2 O 3 0 99,99 Al, B, Ba, Cd, Cr, Mn, Pb, Sr, Ti, Y, Zr For elements, refer to Annex V. Lead and cadmium may be present only as impurities in small quantities that are technically unavoidable and have not been added intentionally. The content of these elements shall be less than 0,02 % (w/w) and has to be declared in the composition. 31 December 2031 SiO 2 0 92 B 2 O 3 0 2,0 BaO 0 0,2 CaO 0 8,0 Cr 2 O 3 0 2,0 Fe 2 O 3 0 4,0 K 2 O 0 3,0 MgO 0 3,0 MnO 2 0 3,5 Na 2 O 0 3,0 P 2 O 5 0 0,1 SrO 0 0,5 TiO 2 0 2,5 ZrO 2 0 3,0 Y 2 O 3 0 0,4 2033 Ceramics Oxide ceramics ZrO 2 ceramics Al 2 O 3 0 95 Al, Cd, Hf, Pb, Pr, Ti, Y, Zr For elements, refer to Annex V. Lead and cadmium may be present only as impurities in small quantities that are technically unavoidable and have not been added intentionally. The content of these elements shall be less than 0,02 % (w/w) and has to be declared in the composition. 31 December 2031 ZrO 2 5,0 99 HfO 2 0 2,0 MgO 0 4,0 CaO 0 0,1 Fe 2 O 3 0 0,1 SiO 2 0 5,0 TiO 2 0 0,5 Y 2 O 3 0 8,5 Pr 2 O 3 0 0,2 Na 2 O 0 0,1 K 2 O 0 0,1 2034 Ceramics Oxide ceramics Hard ferrite ceramics FeO/Fe 2 O 3 80 95 Al, Ba, Bi, Cd, Cr, Cu, Mn, Ni, Pb, Sr For elements, refer to Annex V. Lead and cadmium may be present only as impurities in small quantities that are technically unavoidable and have not been added intentionally. The content of these elements shall be less than 0,02 % (w/w) and has to be declared in the composition. 31 December 2031 Al 2 O 3 0 3,0 BaO 0 12 CaO 0 3,0 Cr 2 O 3 0 0,1 Bi 2 O 3 0 0,4 MnO 0 3,0 NiO 0 0,1 P 2 O 5 0 0,1 SiO 2 0 5,0 SrO 0 12 MgO 0 0,1 Na 2 O 0 0,1 ZnO 0 0,1 CuO 0 0,1 2035 Ceramics Non-oxide ceramics Silicon carbide (SiC) ceramics SiC 78 100 Al, B, Cd, Ni, Pb, Ti, Y, Zr Benzo-(a)-pyrene Sum of 4 PAHs:Benzo[b]fluoranthene, Benzo[k]fluoranthene, Benzo[ghi]perylene, Indeno[1,2,3-cd]pyrene For elements, refer to Annex V. benzo-(a)-pyrene MTC tap = 0,001 Sum of benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[ghi]perylene, and indeno[1,2,3-cd]pyrene MTC tap = 0,01 Lead and cadmium may be present only as impurities in small quantities that are technically unavoidable and have not been added intentionally. The content of these elements shall be less than 0,02 % (w/w) and has to be declared in the composition. 31 December 2031 Si 0 22 Al 0 2,0 Al 2 O 3 0 5,0 B 0 3,0 C 0 5,0 Ca 0 0,1 Fe 0 0,2 Fe 2 O 3 0 3,0 Na 0 0,1 Ni 0 0,1 SiO 2 0 3,0 Ti 0 0,2 Y 2 O 3 0 3,0 ZrB 2 0 11 MgO 0 0,1 2036 Ceramics Non-oxide ceramics Silicon carbide with free carbon (SISIC-C) ceramics SiC 55 90 Al, B, Cd, Ni, Pb, Ti Benzo-(a)-pyrene Sum of 4 PAHs: Benzo[b]fluoranthene, Benzo[k]fluoranthene, Benzo[ghi]perylene, Indeno[1,2,3-cd]pyrene For elements, refer to Annex V. benzo-(a)-pyrene MTC tap = 0,001 Sum of benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[ghi]perylene, and indeno[1,2,3-cd]pyrene MTC tap = 0,01 Lead and cadmium may be present only as impurities in small quantities that are technically unavoidable and have not been added intentionally. The content of these elements shall be less than 0,02 % (w/w) and has to be declared in the composition. 31 December 2031 C 5,0 40 Al 0 0,2 B 0 0,5 Ca 0 0,1 Fe 0 0,2 Ni 0 0,1 Si 2,0 15 SiO 2 0 2,5 Ti 0 0,2 2037 Ceramics Non-oxide ceramics Tungsten carbide (WC) ceramics WC 90 100 Cd, Cr, Mo, Ni, Pb, W Benzo-(a)-pyrene Sum of 4 PAHs: Benzo[b]fluoranthene, Benzo[k]fluoranthene, Benzo[ghi]perylene, Indeno[1,2,3-cd]pyrene For elements, refer to Annex V. benzo-(a)-pyrene MTC tap = 0,001 Sum of benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[ghi]perylene, and indeno[1,2,3-cd]pyrene MTC tap = 0,01 Lead and cadmium may be present only as impurities in small quantities that are technically unavoidable and have not been added intentionally. The content of these elements shall be less than 0,02 % (w/w) and has to be declared in the composition. 31 December 2031 Cr 3 C 2 0 1,0 Mo 0 1,0 Ni 0 8,0 2038 Ceramics Non-oxide ceramics Silicon nitride (SN) ceramics Si 3 N 4 78 97 Al, Cd, La, Pb, Ti, Y, Zr For elements, refer to Annex V. Lead and cadmium may be present only as impurities in small quantities that are technically unavoidable and have not been added intentionally. The content of these elements shall be less than 0,02 % (w/w) and has to be declared in the composition. 31 December 2031 Al 2 O 3 0 7,0 CaO 0 2,0 Fe 2 O 3 0 1,0 La 2 O 3 0 6,0 MgO 0 4,0 SiO 2 0 7,0 TiO 2 0 5,0 Y 2 O 3 0 3,0 ZrO 2 0 3,0 2039 Ceramics Ceramic materials made of carbon Graphites No specific composition requirements. The starting materials include lignite, coal or petrol coke, which are mixed with a binding agent such as tar or a plastic resin, and then annealed at 600 °C to 1 000 °C. This produces carbon graphites, which are used for applications such as slide bearings, sealing rings or pump components. In another optional manufacturing step, the graphitisation, these carbon graphites are annealed once again at up to 3 000 °C. This causes the individual graphite crystals to enlarge, causing an increase in density. Contaminants are burned off to improve purity. Cd, Pb Benzo-(a)-pyrene Sum of 4 PAHs: Benzo[b]fluoranthene, Benzo[k]fluoranthene, Benzo[ghi]perylene, Indeno[1,2,3-cd]pyrene For elements, refer to Annex V. benzo-(a)-pyrene MTC tap = 0,001 Sum of benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[ghi]perylene, and indeno[1,2,3-cd]pyrene MTC tap = 0,01 Lead and cadmium may be present only as impurities in small quantities that are technically unavoidable and have not been added intentionally. The content of these elements shall be less than 0,02 % (w/w) and has to be declared in the composition. First annealing at 600 °C to 1 000 °C; second annealing at up to 3 000 °C. For graphites that have been impregnated with an organic resin, the resin should be assessed separately based on the coating guideline. 31 December 2031 2040 Ceramics Ceramic materials made of carbon Amorphous carbon layer No specific composition requirements. These coatings may be produced using a number of different methods. This leads to the formation of crystalline layers of graphite and diamond. Cd, Pb Benzo-(a)-pyrene Sum of 4 PAHs: Benzo[b]fluoranthene, Benzo[k]fluoranthene, Benzo[ghi]perylene, Indeno[1,2,3-cd]pyrene For elements, refer to Annex V. benzo-(a)-pyrene MTC tap = 0,001 Sum of benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[ghi]perylene, and indeno[1,2,3-cd]pyrene MTC tap = 0,01 Lead and cadmium may be present only as impurities in small quantities that are technically unavoidable and have not been added intentionally. The content of these elements shall be less than 0,02 % (w/w) and has to be declared in the composition. 31 December 2031 2041 Ceramics Ceramic materials made of carbon Carbon fibres No specific composition requirements. These fibres are made of organic fibres, such as viscose or polyacrylonitrile fibres, that are transformed into carbon by pyrolysis. Cd, Pb Benzo-(a)-pyrene Sum of 4 PAHs: Benzo[b]fluoranthene, Benzo[k]fluoranthene, Benzo[ghi]perylene, Indeno[1,2,3-cd]pyrene For elements, refer to Annex V. benzo-(a)-pyrene MTC tap = 0,001 Sum of benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[ghi]perylene, and indeno[1,2,3-cd]pyrene MTC tap = 0,01 Lead and cadmium may be present only as impurities in small quantities that are technically unavoidable and have not been added intentionally. The content of these elements shall be less than 0,02 % (w/w) and has to be declared in the composition. 31 December 2031 2042 Other inorganic materials Mixed metal oxides Mixed metal oxides (MMO) coatings of iridium oxide and tantalum oxide IrO 2 50 85 No migration tests required for Ir or Ta.   Used as coatings of titanium anodes. Maximum layer thickness: 20 μm. 31 December 2031 Ta 2 O 5 15 50 Notes : 1.    Note 1: Explanation of the notes in Table 1 The meaning of the note provided in Table 1 is as follows: A. Relevant chemical species are those identified in accordance in accordance with Section 3, Annex IV to Commission Implementing Decision (EU) 2024/365. 2.    Note 2: Additional conditions of use For the purposes of this positive list, for elements of relevance in the migration water corresponding MTC tap, inorganics values shown in Annex V for enamels, ceramic and other inorganic materials shall apply

MTC TAP FOR METALS OF RELEVANCE IN THE MIGRATION WATER

ANNEX VSupplementary provisions

ANNEX V MTC TAP FOR METALS OF RELEVANCE IN THE MIGRATION WATER The following is provided for information purposes only: (a) Reference value; (b) Allocation factor; (c) MTC tap for metallic materials. Table 1 MTC tap for metals for the specific material types Metal Reference value Organic materials Metallic materials Cementitious materials Enamels, ceramic and other inorganic materials MTC tap, organics [μg/l] Allocation factor MTC tap, metallic [μg/l] Allocation factor MTC tap, cementitious [μg/l] Allocation factor MTC tap, inorganic [μg/l] Allocation factor Aluminium Al Parametric value in Part C, Annex I of Directive (EU) 2020/2184 20 10% 100 50% 30 15% 100 50% Ammonium NH 4 + Parametric value in Part C, Annex I of Directive (EU) 2020/2184 50 10%     50 10%     Antimony Sb Parametric value in Part B, Annex I of Directive (EU) 2020/2184 1,0 10% 5,0 50% 1,0 10% 1,0 10% Arsenic As Parametric value in Part B, Annex I of Directive (EU) 2020/2184     5,0 50% 1,0 10%     Barium Ba Specific Migration Limit (SML) set out in Annex II of Commission Regulation (EU) No 10/2011 50 10%     50 10% 50 10% Bismuth Bi Not available     Not available       Not available   Boron B Parametric value in Part B, Annex I of Directive (EU) 2020/2184 150 10%     150 10% 150 10% Cadmium Cd Parametric value in Part B, Annex I of Directive (EU) 2020/2184     2,5 50% 0,5 10% 0,25 5% Calcium Ca Not applicable                 Cerium Ce Not available         Not available   Not available   Chromium Cr Parametric value in Part B, Annex I of Directive (EU) 2020/2184, until 12 January 2036 5,0 10% 25 50% 5,0 10% 5,0 10% Parametric value in Part B, Annex I of Directive (EU) 2020/2184, after 12 January 2036 2,5 10% 13 50% 2,5 10% 2,5 10% Cobalt Co Specific Migration Limit (SML) set out in Annex II of Commission Regulation (EU) No 10/2011 2,5 10%     2,5 10% 13 50% Copper Cu Parametric value in Part B, Annex I of Directive (EU) 2020/2184 200 10% 1800 90% 200 10% 200 10% Europium Eu Specific Migration Limit (SML) set out in Annex II of Commission Regulation (EU) No 10/2011 2,5 10%     2,5 10%     Fluoride F - Parametric value in Part B, Annex I of Directive (EU) 2020/2184 150 10%     150 10%     Gadolinium Ga Specific Migration Limit (SML) set out in Annex II of Commission Regulation (EU) No 10/2011 2,5 10%     2,5 10%     Hafnium Hf Not available             Not available   Iron Fe Parametric value in Part C, Annex I of Directive (EU) 2020/2184 20 10% 100 50% 20 10% 20 10% Lanthanum La Specific Migration Limit (SML) set out in Annex II of Commission Regulation (EU) No 10/2011 2,5 10%     2,5 10% 13 50% Lead Pb Parametric value in Part B, Annex I of Directive (EU) 2020/2184     2,5 50% 0,5 10% 0,25 5% Lithium Li Specific Migration Limit (SML) set out in Annex II of Commission Regulation (EU) No 10/2011 30 10%     30 10% 30 10% Magnesium Mg Not applicable                 Manganese Mn Parametric value in Part C, Annex I of Directive (EU) 2020/2184 5,0 10% 25 50% 5,0 10% 25 50% Molybdenum Mo Not available     Not available       Not available   Nickel Ni Parametric value in Part B, Annex I of Directive (EU) 2020/2184     10 50% 2,0 10% 2,0 10% Potassium K Not applicable                 Praseodymium Pr Not available             Not available   Selenium Se Parametric value in Part B, Annex I of Directive (EU) 2020/2184     10 50%         Sodium Na Not applicable                 Strontium Sr Not available             Not available   Terbium Tb Specific Migration Limit (SML) set out in Annex II of Commission Regulation (EU) No 10/2011 2,5 10%             Tin Sn Not available                 Titanium Ti Not available     Not available       Not available   Tungsten W Specific Migration Limit (SML) for entry FCM substance No. 1064 set out in Annex I of Commission Regulation (EU) No 10/2011 2,5 10%     2,5 10% 2,5 10% Vanadium V Not available Not available               Yttrium Y Not available             Not available   Zinc Zn Specific Migration Limit (SML) set out in Annex II of Commission Regulation (EU) No 10/2011 250 10% 2250 90% 250 10%     Zirconium Zr Not available Not available           Not available   Notes : ‘Not applicable’ means that the metal is not hazardous and no MTC tap applies.

Source: EUR-Lex (Publications Office of the EU), © European Union, reuse permitted under Commission Decision 2011/833/EU.

Contents

What to look at next

Browse all EU Legal ActsEvery instrument by type and year, full text free to read section by sectionEuropean Union legislationEU Legal Acts by type and yearGrouped by instrument type and year of enactment, so you can find others of the same kindBrowse by type and yearEuropean Union: what this database coversWhich datasets are here, which official source they come from, and how current they areEuropean Union overview