Article 1
Implementing Decision (EU) 2023/941 is amended as follows: (1) Annex I is amended in accordance with Annex I to this Decision; (2) Annex II is amended in accordance with Annex II to this Decision.
Commission Implementing Decision (EU) 2024/2599 of 4 October 2024 amending Commission Implementing Decision (EU) 2023/941 as regards the harmonised standards for personal fall protection equipment, powered filtering respiratory protective devices, footwear, electrically insulating helmets and eye and face protection for occupational use drafted in support of Regulation (EU) 2016/425 of the European Parliament and of the Council
RepealedRepealed 2026-06-15Status inferred from the source text; the official notice prevails.This legislation has been repealed. Do not cite it as law in force.
Data as of 2026-07-04 · Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗
Implementing Decision (EU) 2023/941 is amended as follows: (1) Annex I is amended in accordance with Annex I to this Decision; (2) Annex II is amended in accordance with Annex II to this Decision.
This Decision shall enter into force on the day of its publication in the Official Journal of the European Union . However, point 1 of Annex I to this Decision shall apply from 8 April 2026 and point 2 of Annex I to this Decision shall apply from 8 October 2026.
ANNEX I Annex I to Implementing Decision (EU) 2023/941 is amended as follows: (1) rows 35, 54, 108, 139, 182, 183 and 184 are deleted; (2) rows 109 and 110 are deleted; (3) the following rows are inserted in sequential order: ‘35a. EN 360:2023 Personal fall protection equipment – Retractable type fall arresters’; ‘54a. EN 564:2023 Mountaineering equipment – Accessory cord – Safety requirements and test methods’; ‘108a. EN 12841:2024 Personal fall protection equipment – Rope access systems – Rope adjustment devices’; ‘109a. EN 12941:2023 Respiratory protective devices – Powered filtering devices incorporating a loose fitting respiratory interface – Requirements, testing, marking’; ‘110a. EN 12942:2023 Respiratory protective devices – Powered filtering devices incorporating full face masks, half masks or quarter masks – Requirements, testing, marking’; ‘139a. EN 14058:2017+A1:2023 Protective clothing – Garments for protection against cool environments’; ‘182a. EN ISO 20345:2022 Personal protective equipment – Safety footwear (ISO 20345:2021) EN ISO 20345:2022/A1:2024’; ‘183a. EN ISO 20346:2022 Personal protective equipment – Protective footwear (ISO 20346:2021) EN ISO 20346:2022/A1:2024’; ‘184a. EN ISO 20347:2022 Personal protective equipment – Occupational footwear (ISO 20347:2021) EN ISO 20347:2022/A1:2024’; (4) the following row is added: ‘189.I EN 50365:2023 Live Working – Electrically insulating helmets for use on low and medium voltage installations’.
ANNEX II Rows 2, 3, 4, 5 and 16 of Annex II to Implementing Decision (EU) 2023/941 are replaced by the following: ‘2 EN 166:2001 Personal eye-protection – Specifications 11.11.2025’; ‘3 EN 169:2002 Personal eye-protection – Filters for welding and related techniques – Transmittance requirements and recommended use 11.11.2025’; ‘4 EN 170:2002 Personal eye-protection – Ultraviolet filters – Transmittance requirements and recommended use 11.11.2025’; ‘5 EN 172:1994 Personal eye protection – Sunglare filters for industrial use EN 172:1994/A1:2000 EN 172:1994/A2:2001 11.11.2025’; ‘16 EN 1731:2006 Personal eye protection – Mesh eye and face protectors 11.11.2025’.
Source: EUR-Lex (Publications Office of the EU), © European Union, reuse permitted under Commission Decision 2011/833/EU.