Article 1
Open ↗The Annex to Implementing Decision (EU) 2019/450 is amended in accordance with the Annex to this Decision.
Commission Implementing Decision (EU) 2024/2904 of 14 November 2024 amending Implementing Decision (EU) 2019/450 as regards the publication of references of European Assessment Documents for internal doorsets without resistance to fire and smoke control characteristics made of metal profiles and bound polystyrene bulk material for thermal insulation, sound insulation or both and other construction products
Data as of 2026-07-04 · Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗
The Annex to Implementing Decision (EU) 2019/450 is amended in accordance with the Annex to this Decision.
This Decision shall enter into force on the day of its publication in the Official Journal of the European Union .
ANNEX In the Annex to Implementing Decision (EU) 2019/450, the following rows are inserted in sequential order following the order of the reference numbers: ‘020096-00-0405 Internal doorsets without resistance to fire and smoke control characteristics made of metal profiles’ ‘040635-01-1201 Bound polystyrene bulk material for thermal insulation, sound insulation or both (superseding technical specification ‘EAD 040635-00-1201’)’ ‘041669-00-1201 Thermal insulation board made of silica- or polyurethane-aerogel on a carrier material’ ‘042232-00-0503 Flexible interlayer for the reduction of flanking sound and vibration transmission’ ‘090078-00-0504 Ceramic multilayer slabs for wall claddings and floorings’ ‘130647-00-0304 Special block glued laminated timber’ ‘130767-00-0603 Wood-based dowel-type fasteners’ ‘150007-01-0301 Portland cement with pozzolanic filler for tropical use (superseding technical specification ‘150007-00-0301’)’ ‘150052-00-0301 White high alumina calcium aluminate cement’ ‘160088-00-0102 Kits for construction of a rock and soil nail – Kits with hollow bars for a self-drilling nail – Hollow bars of seamless or welded steel tubes’ ‘160208-00-0301 S-shaped double headed reinforcement elements for the increase of punching shear resistance of footings and ground slabs’ ‘180037-00-0706 Backwater valve kits made of plastics for insertion in gravity drainage systems’ ‘180040-00-0704 Sewage separators inside buildings’ ‘180041-00-0704 Retrofit kits for small wastewater treatment plants’ ‘190021-00-0502 Recycled plastic self-blocking paving units’ ‘200006-00-0302 Cable nets with fastening components’ ‘260057-00-0303 Inorganic fibre grids for reinforcement of cement-, anhydrite- or resin-based screeds’ ‘300021-00-0404 Vacuum insulating glass units’ ‘300031-00-0404 Pressure-equalizing insulating glass units’ ‘330008-04-0601 Anchor channels (superseding technical specification ‘EAD 330008-03-0601’)’ ‘332001-01-0602 Clamping kits for connection of precast concrete members (superseding technical specification ‘EAD 332001-00-0602’)’ ‘332589-01-0601 Wire loop system for the connection of precast and in-situ concrete elements (superseding technical specification ‘EAD 332589-00-0601’)’ ‘332700-00-0601 Concrete screws for fastening sandwich panels’ ‘340451-00-0104 Kits made of alkali-resistant glass fibre mesh, connectors and mortar for strengthening of masonry and reinforced concrete elements by external bonding’ ‘340503-00-1106 Prefabricated fire-resistant building units’ ‘360001-02-0803 Ventilation systems made of mineral wool with facings on outside and inside (superseding technical specification ‘EAD 360001-01-0803’)’.
Source: EUR-Lex (Publications Office of the EU), © European Union, reuse permitted under Commission Decision 2011/833/EU.