Source

Council Regulation (EU) 2024/1851 of 25 June 2024 amending Regulation (EU) 2021/2278 suspending the Common Customs Tariff duties referred to in Article 56(2), point (c), of Regulation (EU) No 952/2013 of the European Parliament and of the Council on certain agricultural and industrial products

Regulation (EU) 2024/1851 · Regulation · 3 articles

Data as of 2026-07-04 · Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗

Article 1

Open ↗

The Annex to Regulation (EU) 2021/2278 is amended in accordance with the Annex to this Regulation.

Article 2

Open ↗

This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union . It shall apply from 1 July 2024.

Supplementary provisions

ANNEXSupplementary provisions

Open ↗

ANNEX The Annex to Regulation (EU) 2021/2278 is amended as follows: (1) the entries with the following serial numbers are deleted: 0.2543, 0.2930, 0.2932, 0.2990, 0.3534, 0.3559, 0.3564, 0.3577, 0.3580, 0.3611, 0.3618, 0.4644, 0.4645, 0.4757, 0.5263, 0.5818, 0.5920, 0.6109, 0.6241, 0.6242, 0.6244, 0.6259, 0.6263, 0.6347, 0.6370, 0.6476, 0.6563, 0.6564, 0.6634, 0.6769, 0.6774, 0.6857, 0.6874, 0.6893, 0.6934, 0.7121, 0.7259, 0.7456, 0.7598, 0.7649, 0.7704, 0.7788, 0.7975, 0.7994, 0.8176, 0.8178, 0.8462; (2) the following entries replace those entries that have the same serial numbers: Serial Number CN code TARIC Description Rate of autonomous duty Supplementary Unit Date envisaged for mandatory review ‘0.4080 ex 1517 90 99 10 Vegetable and/or microbial oil, refined, containing by weight; — 25 % or more but not more than 70 % arachidonic acid, or — 12 % or more but not more than 65 % docosahexaenoic acid, and Whether or not: — standardized with high oleic sunflower oil (HOSO), — containing by weight 0,005 % or more, but not more than 0,1 % of antioxidants 0 % — 31.12.2026 0.5110 ex 2818 10 91 20 Sintered corundum with a micro crystalline structure, consisting of aluminium oxide (CAS RN 1344-28-1), magnesium aluminate (CAS RN 12068-51-8) and the rare earth aluminates of yttrium, lanthanum, and neodymium, with a content by weight (calculated as oxides) of: — 92 % or more, but less than 98,5 % of aluminium oxide, — 2 % (±1,5 %) of magnesium oxide, — 1 % (±0,6 %) of yttrium oxide, and — either 3 % (±2,2 %) of lanthanum oxide or — 2 % (±1,2 %) of lanthanum oxide and neodymium oxide, with less than 50 % of the total weight having a particle size of more than 10 mm 0 % — 31.12.2025 0.8073 ex 2912 19 00 20 Acrylaldehyde (CAS RN 107-02-8) with a purity by weight of 98 % or more for the production of perfume or pharmaceutical intermediaries ( 1 ) 0 % — 31.12.2025 0.8527 ex 2933 39 99 63 1-Methyl-4-piperidone (CAS RN 1445-73-4) with a purity by weight of 97 % or more 0 % — 31.12.2028 0.5131 ex 2933 69 80 55 Terbutryn (ISO) (CAS RN 886-50-0) for use as a raw material for the production of technical preservatives, in other sectors than for pesticides ( 1 ) 0 % — 31.12.2025 0.8354 ex 2933 79 00 23 ( S )-2-Amino-3-[( S )-2-oxopyrrolidin-3-yl]propanamide hydrochloride (CAS RN 2628280-48-6) with a purity by weight of 95 % or more 0 % — 31.12.2027 0.8359 ex 2933 99 80 64 (1 R ,2 S ,5 S )-3-[( S )-3,3-dimethyl-2-(2,2,2-trifluoroacetamido)butanoyl]-6,6-dimethyl-3-azabicyclo[3.1.0]hexane-2-carboxylic acid (CAS RN 2755812-45-2) with a purity by weight of 95 % or more 0 % — 31.12.2027 0.7318 ex 3603 50 00 10 Igniters for gas generators with: — an overall maximum length of 15,5 mm or more but not more than 29,4 mm, and — a pin length of 6,4 mm or more but not more than 12,6 mm 0 % — 31.12.2028 0.5727 ex 3811 21 00 29 Additive containing by weight: — 25 % or more but not more than 40 % of calcium C16-24 alkylbenzenesulphonates (CAS RN 70024-69-0), — 30 % or more but not more than 65 % of mineral oils, for use in the manufacture of blends of additives for lubricating oils ( 1 ) 0 % — 31.12.2027 0.6435 ex 3811 21 00 48 Additives containing: — overbased magnesium (C20-C24) alkylbenzenesulphonates (CAS RN 231297-75-9) and — by weight more than 25 % but not more than 50 % of mineral oils, — having a total base number of more than 350, but not more than 450, for use in the manufacture of lubricating oils or for use in the manufacture of blends of additives for lubricating oils ( 1 ) 0 % — 31.12.2024 0.8366 ex 3812 39 90 85 Light stabilizer, reaction product of stearic acid methyl ester with 1-(2-hydroxy-2-methylpropoxy)-2,2,6,6-tetramethyl-4-piperidinol (CAS RN 300711-92-6) with a purity of less than 90 % by weight 0 % — 31.12.2027 0.4520 ex 3920 62 19 32 Transparent poly(ethylene terephthalate) film: — having thickness of both sides of 7 nm or more but not more than 80 nm, or thickness of both sides of 7 μm or more but not more than 80 μm, whether coated with an acrylic-based organic material or not, — with a surface tension of 36 Dyne/cm or more but not more than 39 Dyne/cm, or transparent 3 or 4 layers, second layer of PET, and other layers contain fluorine resin, — with a light transmittance of more than 70 %, — with a haze value of not more than 1,3 %, — with a total thickness of 10 μm or more but not more than 350 μm, — with a width of 800 mm or more but not more than 1 600 mm 0 % — 31.12.2028 0.8291 ex 3921 90 55 70 Membrane composed of a polyamide layer and a polysulfone layer on a polyethylene terephthalate support layer with: — a total thickness of 0,25 mm or more but not more than 0,40 mm, — a total weight of 109 g/m 2 or more but not more than 114 g/m 2 0 % m 2 31.12.2026 0.8372 ex 4411 12 92 10 Fibreboard: — with a thickness of 2,20 mm or more but not more than 2,80 mm, — with a density of 0,95 g/cm 3 or more, — lacquered or coated with melamine foil on both sides, and — with dimensions of 1 300 mm x 1 100 mm or less 0 % — 31.12.2027 0.8123 ex 8479 89 97 28 Integrated electric brake unit for immediate generation of the hydraulic pressure during braking, full electronic brake control and enabling regenerative braking of motor vehicles with: — electronic brake assistants, — hydraulic unit driven by brushless electric motor, — brake fluid reservoir, for use in the manufacture of hybrid passenger cars ( 1 ) 0 % — 31.12.2025 0.5577 ex 8501 31 00 50 DC motors, brushless, with: — an external diameter of 80 mm or more, but not more than 200 mm, — a supply voltage of 4V or more, but not more than 16 V, — an output at 20 o C of 200 W or more, but not more than 750 W, — a torque at 20 o C of 2,00 Nm or more, but not more than 7,00 Nm, — a rated speed at 20 o C of 600 rpm or more, but not more than 3 100 rpm, — with or without a pulley, — with or without an electronic power steering sensor/controller 0 % — 31.12.2027 0.5978 ex 8501 31 00 ex 8501 32 00 55 40 DC motor with or without commutator, for driving hand-held power tools, lawn mowers or home appliances, with: — an external diameter of 24,2 mm or more, but not more than 140 mm, — a rated speed of 3 300 rpm or more, but not more than 26 200 rpm, — a rated supply voltage of 3,6 V or more, but not more than 230 V, — an output power of more than 37,5 W, but not more than 2 400 W, — a free load current of not more than 20,1 A, — a maximum efficiency of 50 % or more 0 % — 31.12.2024 0.4731 ex 8501 31 00 58 Permanently excited DC motor with: — an external diameter of 27 mm or more but not more than 90 mm, including mounting flange, — a rated speed of not more than 25 000 rpm, — an output of 45 W or more but not more than 400 W, and — a supply voltage of 9 V or more but not more than 50 V, — whether or not a multiple-phase winding, — whether or not with a drive disc, — whether or not with a crankcase, — whether or not with a fan, 0 % ( 1 ) — 31.12.2024 — whether or not with a cap assembly, — whether or not with a sun gear, — whether or not with a speed and rotational direction encoder, — whether or not with or without a speed or rotational direction sensor of resolver type or Hall effect type, — whether or not with a mounting flange for use in the manufacture of air suspension seats in tractors, earthmoving machines and forklifts or for use in the manufacture of actuators for height-adjustable furniture ( 1 ) 0.7029 ex 8505 11 10 20 Articles, of an alloy of neodymium, in the shape of a rectangle, triangle, square, or trapezoid, — whether or not arched, — whether or not with rounded corners or oblique sides, — whether or not colour marked — whether or not coated or passivated with a surface treatment, — whether or not consisting of segments bonded together and electrically insulated from one another with: — a length of 9 mm or more, but not more than 105 mm, — a width of 5 mm or more, but not more than 105 mm, — a thickness of 2 mm or more, but not more than 55 mm intended to become permanent magnet after magnetisation 0 % — 31.12.2026 0.5584 ex 8505 11 10 23 Bars in the form of arched rectangles, containing alloy containing neodymium, with: — a length of 15 mm or more but not more than 52 mm, — a width of 5 mm or more but not more than 42 mm, — whether or not coated or passivated with a surface treatment, intended to become permanent magnets after magnetisation 0 % p/st 31.12.2027 0.7567 ex 8505 11 10 25 Permanent magnets, of an alloy of neodymium, cylindrical shaped: — with a notch, — with an internal threaded bore on one side, — with a length of 97,5 mm or more, but not more than 225 mm, — with a diameter of 19 mm or more, but not more than 25 mm, — whether or not coated or passivated with a surface treatment 0 % — 31.12.2024 0.5585 ex 8505 11 10 28 Articles containing alloy containing neodymium, in the form of rings, tubes, bushings or collars: — with an external diameter of not more than 45 mm, — with a height of not more than 45 mm, — whether or not coated or passivated with a surface treatment, intended to become permanent magnets after magnetisation 0 % p/st 31.12.2027 0.3740 ex 8505 11 10 30 Permanent magnets of an alloy of neodymium, either in the shape of a rectangle, whether or not rounded, whether or not coated or passivated with a surface treatment, with: — a rectangular or a trapezoidal cross-section, — a length of not more than 140 mm, — a width of not more than 90 mm and — a thickness of not more than 55 mm, or in the shape of an arched rectangle with: — a length of not more than 75 mm, — a width of not more than 40 mm, — a thickness of not more than 7 mm and — a radius of curvature of more than 86 mm but not more than 241 mm, — layers of nickel and copper or in the shape of a disc with: — a diameter of not more than 90 mm, — whether or not a hole in the centre 0 % p/st 31.12.2024 0.5948 ex 8505 11 10 35 Article of an alloy of neodymium, in the shape of a disc, with: — a diameter of not more than 90 mm, — whether or not a hole in the centre, — layers of copper, nickel and/or zinc, intended to become permanent magnets after magnetisation 0 % — 31.12.2024 0.7789 ex 8505 19 10 20 Permanent magnet of agglomerated ferrite, in the shape of arched rectangles, whether or not coated or passivated with a surface treatment, with: — a length of 16,8 mm or more, but not more than 110,2 mm, — a width of 14,8 mm or more, but not more than 75,2 mm, — a thickness of 4,8 mm or more, but not more than 13,2 mm, for use in the manufacture of electromotor rotors ( 1 ) 0 % — 31.12.2024 0.5937 ex 8505 19 90 30 Articles of agglomerated ferrite in the shape of a disc, whether or not coated or passivated with a surface treatment, with: — a diameter of not more than 120 mm, — a hole in the centre, intended to become permanent magnets after magnetisation with a remanence between 245 mT and 470 mT 0 % — 31.12.2024 0.7299 ex 8505 19 90 45 Article of agglomerated ferrite in the shape of a rectangle, whether or not with oblique sides, with: — a length of 26,85 mm or more but not more than 32,15 mm, — a width of 7,6 mm or more but not more than 9,55 mm, — a thickness of 5,3 mm or more but not more than 5,8 mm, and — a weight of 6,1 g or more but not more than 8,3 g, intended to become a permanent magnet after magnetisation 0 % p/st 31.12.2027 0.7511 ex 8505 19 90 60 Articles of agglomerated ferrite in the shape of arched rectangles, — whether or not coated or passivated with a surface treatment, — whether or not with rounded corners, with: — a length of 9 mm or more but not more than 101 mm, — a width of 9 mm or more but not more than 101 mm, — a thickness of 1,85 mm or more but not more than 15,15 mm, intended to become permanent magnets after magnetisation 0 % — 31.12.2024 0.7663 ex 8507 60 00 18 Lithium-ion polymer accumulator pack equipped with a battery management system and can-bus interface with: — 6 modules with 90 cells or more but not more than 192 cells, — a nominal voltage of 280 V or more but not more than 400 V, — a nominal capacity of 9,7 Ah or more but not more than 120 Ah, — a charging voltage of 110 V or more but not more than 495 V, and in a metal casing with: — a length of not more than 1 723 mm, — a width of not more than 1 162,23 mm, — a height of not more than 395 mm, for use in the manufacture of vehicle capable of being charged by plugging to external source of electric power of heading 8703 ( 1 ) 1,3 % — 31.12.2024 0.8368 ex 8507 60 00 29 Lithium-ion rechargeable battery pack in a specific housing, suitable for use in digital still cameras, having: — a length of 50 mm or more, but not more than 120 mm, — a width of 35 mm or more, but not more than 80 mm, — a height of 15 mm or more, but not more than 45 mm, — a weight of 0,040 kg or more but not more than 0,085 kg; and — a capacity of not more than 2 200 mAh 1,3 % — 31.12.2024 0.5548 ex 8507 60 00 38 Modules for the assembly of lithium-ion battery packs, with: — a length of 298 mm or more, but not more than 500 mm, — a width of 33,5 mm or more, but not more than 209 mm, — a height of 75 mm or more, but not more than 228 mm, — a weight of 3,6 kg or more, but not more than 17 kg, — a power of 458 Wh or more, but not more than 3 510 Wh, and — a voltage of less than 45 V or more than 70 V 1,3 % — 31.12.2024 0.8275 ex 8507 60 00 83 Modules for the assembly of ion lithium electric accumulators with: — a length of 570 mm or more, but not more than 610 mm, — a width of 210 mm or more, but not more than 240 mm, — a height of 100 mm or more, but not more than 120 mm, — a weight of 28 kg or more, but not more than 35 kg, and — a capacity of not more than 2 500 Ah and a nominal energy of less than 8,4 kW, for use in the manufacture of vehicles of subheadings 8703 60 , 8703 70 , 8703 80 and 8704 60 ( 1 ) 1,3 % — 31.12.2024 0.8419 ex 8507 90 80 55 Top cap or housing made of aluminium or ferrous alloy or stainless steel: — whether or not including parts made of aluminum and aluminum alloy, — with or without sealing elements or other elements made of polymer material, — with or without a “current interrupt device” and an “evacuation valve” — with or without plastic sockets — with an outer diameter of 17 mm or more, but not more than 18 mm, or rectangular with: — length not greater than 450 mm, — width not greater than 200 mm, and — hight not greater than 150 mm, for use in the manufacture of lithium-ion batteries ( 1 ) 1,3 % — 31.12.2024 0.8507 ex 8714 99 90 50 Rear air shock absorber in form of a pneumatic spring element with oil damper for use in the manufacture of bicycles, including electrical bicycles ( 1 ) 0 % p/st 31.12.2027 (3) the following entries are inserted according to the numerical order of the CN and TARIC codes in the second and third columns: Serial Number CN code TARIC Description Rate of autonomous duty Supplementary Unit Date envisaged for mandatory review ‘0.8619 ex 2905 39 95 25 Pinacol (CAS RN 76-09-5) with a purity by weight of 98 % or more 0 % — 31.12.2028 0.8604 ex 2912 29 00 65 Terephthalaldehyde (CAS RN 623-27-8) with a purity by weight of 98 % or more 0 % — 31.12.2028 0.8623 ex 2918 99 90 58 2,4-D (ISO) (CAS RN 94-75-7) with a purity by weight of 98 % or more 0 % — 31.12.2028 0.8641 ex 2920 90 10 23 1,3,2-Dioxathiolane 2,2-dioxide (CAS RN 1072-53-3) with a purity by weight of 99 %, or more 3,2 % — 31.12.2028 0.8621 ex 2924 29 70 34 Acetic acid—tert-butyl [(1-aminocyclohexyl)methyl]carbamate (1/1) with a purity by weight of 98 % or more 0 % — 31.12.2028 0.8611 ex 2929 90 00 60 (2 S )-2-[[2-[2-[2-[2-[2-[2-[2-[2-[2-[2-(2-Azidoethoxy)ethoxy]ethoxy]ethoxy]ethoxy]ethoxy]ethoxy]ethoxy]ethylamino]-2-oxoethoxy]acetyl]amino]- N -[4-(hydroxymethyl)phenyl]-6-[[(4-methoxyphenyl)-diphenylmethyl]amino]hexanamide (CAS RN 1224601-12-0) with a purity by weight of 98 % or more 0 % — 31.12.2028 0.8640 ex 2931 90 00 43 Trimethylindium (CAS RN 3385-78-2) with a purity by weight of 99 % or more 0 % — 31.12.2028 0.8649 ex 2931 90 00 48 4-Phenoxybenzeneboronic acid (CAS RN 51067-38-0) with a purity by weight of 98 % or more 0 % — 31.12.2028 0.8652 ex 2931 90 00 58 Trimethylgallium (CAS RN 1445-79-0) with a purity by weight of 99 % or more 0 % — 31.12.2028 0.8615 ex 2932 19 00 15 2-Methylfuran (CAS RN 534-22-5) with a purity by weight of 98 % or more 0 % — 31.12.2028 0.8636 ex 2932 19 00 25 Methyl tetrahydro-2-furancarboxylate (CAS RN 37443-42-8) with a purity by weight of 98 % or more 0 % — 31.12.2028 0.8605 ex 2932 19 00 35 (2 S ,3 S ,4 S ,5 R )-3-(3,4-Difluoro-2-methoxyphenyl)-4,5-dimethyl-5-(trifluoromethyl)tetrahydrofuran-2-yl-4-nitrobenzoate (CAS RN 2875066-49-0) with a purity by weight of 97 % or more 0 % — 31.12.2028 0.8603 ex 2933 19 90 58 1 H -Pyrazole (CAS RN 288-13-1) with a purity by weight of 98 % or more 0 % — 31.12.2028 0.8613 ex 2933 19 90 68 1-Methyl-1 H -pyrazol-4-amine hydrochloride (CAS RN 127107-23-7) with a purity by weight of 95 % or more 0 % — 31.12.2028 0.8639 ex 2933 29 90 43 2-Octyl-4,5-dihydro-1 H -imidazole (CAS RN 10443-60-4) with a purity by weight of 95 % or more 0 % — 31.12.2028 0.8637 ex 2933 39 99 53 5-Methyl-2-pyridylamine (CAS RN 1603-41-4) with a purity by weight of 99 % or more 0 % — 31.12.2028 0.8618 ex 2933 39 99 56 2-[[[3-Methyl-4-(2,2,2-trifluoroethoxy)pyridin-2-yl]methyl]sulfanyl]1 H -benzimidazole (CAS RN 103577-40-8) with a purity by weight of 99 % or more 0 % — 31.12.2028 0.8624 ex 2933 39 99 58 Tert -butyl N -[5-(trifluoromethyl)pyridin-3-yl]carbamate (CAS RN 1187055-61-3) with a purity by weight of 98 % or more 0 % — 31.12.2028 0.8656 ex 2933 39 99 66 (2 S ,4 S )-4-Ethoxy-2-[4-(methoxycarbonyl)phenyl]piperidin-1-ium(2Z)-3-carboxyprop-2-enoate (CAS RN 2408761-21-5) with a purity by weight of 98 % or more 0 % — 31.12.2028 0.8612 ex 2933 59 95 51 (1 R ,5 S )-8-Benzyl-3,8-diazabicyclo[3.2.1]octane; 4-(4-hydroxyphenyl)phenol (2:1) (CAS RN 2642049-87-2) with a purity by weight of 95 % or more 0 % — 31.12.2028 0.8602 ex 2933 59 95 54 2-Chloro-4-methylpyrimidine (CAS RN 13036-57-2) with a purity by weight of 99 % or more 0 % — 31.12.2028 0.8643 ex 2933 99 80 35 2-[6-Methyl-2-(4-methylphenyl)imidazo[1,2-a]pyridin-3-yl]acetic acid (CAS RN 189005-44-5) with a purity by weight of 98 % or more 0 % — 31.12.2028 0.8642 ex 2934 99 90 38 2-Chloro-9 H -thioxanthen-9-one (CAS RN 86-39-5) with a purity by weight of 98 % or more 0 % — 31.12.2028 0.8601 ex 2934 99 90 50 Vutrisiran (INN) (CAS RN 1867157-35-4) with a purity by weight of 98 % or more 0 % — 31.12.2028 0.8606 ex 2935 90 90 41 Lenacapavir sodium (INNM) (CAS RN 2283356-12-5) with a purity by weight of 98 % or more 0 % — 31.12.2028 0.8635 ex 2940 00 00 70 Alpha-D-Mannopyranose, 6-acetate 2,3,4-tribenzoate 1-(2,2,2-trichloroethanimidate) (CAS RN 346441-49-4) with a purity by weight of 95 % or more 0 % — 31.12.2028 0.8614 ex 2942 00 00 20 Dimethylamine—borane (1:1) (CAS RN 74-94-2) with a purity by weight of 98 % or more 0 % — 31.12.2028 0.8678 ex 3204 17 00 28 Colourant C.I. Pigment Yellow 12 (CAS RN 6358–85-6) and preparations based thereon with a colourant C.I. Pigment Yellow 12 content of 21 % or more by weight 0 % — 31.12.2028 0.8676 ex 3207 30 00 30 Silver paste, containing by weight: — 45 % or more, but not more than 90 % silver (CAS RN 7440-22-4) and — 59 % or more, but not more than 92 % of the total solids (including silver) for use as conductor in the production of solar cells ( 2 ) 0 % ( 2 ) — 31.12.2028 0.8630 ex 3207 30 00 40 Aluminium paste, containing by weight: — 72 % or more but not more than 82 % aluminium (CAS RN 7429-90-5) — with a viscosity of 10 or more, but not more than 100 Pa.s (Brookfield RVT, 14 Spindle, 20 rpm, 25 o C±0,5 o C) — with an aluminium particle size of not more than 25 μm for use in the production of solar cells ( 2 ) 0 % — 31.12.2028 0.8655 ex 3811 29 00 23 Additive for lubricating oils consisting of molybdenum, bis (dibutylcarbamodithioato)di-μ-oxodioxodi-, sulfurized (CAS RN 68412-26-0) 0 % — 31.12.2028 0.8644 ex 3824 99 92 71 Mixture containing by weight: — 49 % or more but not more than 51 % of ethylene carbonate (CAS RN 96-49-1), and — 49 % or more but not more than 51 % of 1,3-propanesultone (CAS RN 1120-71-4) 3,2 % — 31.12.2028 0.8670 ex 3910 00 00 85 Two-component silicone, with a viscosity of the mixture of 3 000 cps or more, but not more than 6 000 cps (according to standard GB/T 2794) for use as an electrical insulation material in solar panels junction box in the production of solar panels ( 2 ) 0 % — 31.12.2028 0.8667 ex 3919 10 80 ex 3919 90 80 78 48 Polytetrafluoroethylene film, — with a thickness of 50 μm or more, — with a width of 6,30 mm or more but not more than 740 mm, — an elongation at break of not more than 200 %, and — coated on one side with a pressure sensitive silicone adhesive with a thickness of not more than 50 μm 0 % — 31.12.2028 0.8629 ex 3919 90 80 55 Black polyvinyl chloride film: — with a gloss of more than 25 degrees according to ASTM D 2457, — whether or not covered on one side with a protective film of polyethylene terephthalate and on the other side with a micro-structured pressure sensitive acrylic adhesive and a release liner for use in the manufacture of die-cut films for interior and exterior surfaces of cars ( 2 ) 0 % — 31.12.2028 0.8664 ex 3926 90 97 22 Gaskets for road vehicles mirrors and their components, made of polyethylene foam, produced by a thermoforming process and with: — a density of 20 kg/m 3 or more, but not more than 40 kg/m 3 , — a tensile strength of not less than 170 kPa, — water absorption coefficient of not greater than 1 %, — a length of 5 mm or more but not more than 300 mm, — a height of 10 mm or more but not more than 400 mm, — a depth of 5 mm or more but not more than 250 mm 0 % — 31.12.2028 0.8646 ex 4016 99 52 10 Hanger of the exhaust muffler consisting of: — a steel bracket with at least one mounting hole and — silent block, for use in the manufacture of goods of Chapter 87 ( 2 ) 0 % — 31.12.2028 0.8666 ex 6804 21 00 30 Steel wire used for cropping and squaring semiconductors: — covered with diamond grains of 5 μm or more but not more than 55 μm, — with a wire diameter of 45 μm or more, but not more than 350 μm — a breaking strength of 11 N or more but not more than 170 N 0 % — 31.12.2028 0.8663 ex 7009 91 00 10 Chrome-plated glass mirror with: — a length of 155 mm or more, but not more than 158 mm, — a height of 115 mm or more, but not more than 120 mm, — a blind spot sensor with a blind spot motion detection light module, with an edge luminescence greater than or equal to 5 000 cd/m 2 and a central luminescence greater than or equal to 7 000 cd/m 2 , — a heater foil, with a resistance of 1,1 kΩ or more, but not more than 1,35 kΩ, designed to be mounted in a housing as an exterior vehicle mirror, for use in the manufacture of car mirrors ( 2 ) 0 % — 31.12.2028 0.8682 ex 7009 91 00 20 Aspherical, convex or flat chrome-plated glass, ready for framing: — with a length of 140 mm or more but not more than 215 mm, — with a height of 104 mm or more but not more than 138 mm, — with curvature radius of 0 mm or more but not more than 1 330 mm, — with a reflectance of more than 40 %, for the manufacture of automotive mirrors ( 2 ) 0 % — 31.12.2028 0.8616 ex 7019 90 00 50 Insulating rigid panels made by vacuum compression of glass fibres wrapped in protective gas-tight film, for use in the manufacture of refrigerators and freezers and their combinations ( 2 ) 0 % — 31.12.2028 0.8668 ex 8402 90 00 10 Pre-assembled process module unit of an ethane cracker unit, containing: — a dilution steam generator system which produces steam from pretreated quench water for use as dilution steam in steam cracking furnaces, — a condensate system that collects, filters and deaerates steam condensates, which are subsequently recycled as boiler feed water and further distributed within the cracker unit, and — a flare system that collects, separates and vaporizes non-recyclable hydrocarbon containing releases from different equipment in a steam cracker, and transfers those towards flares 0 % — 30.06.2025 0.8610 ex 8409 91 00 28 Carburetor with: — 2 mounting holes with a diameter of 31 mm, — a choke bore diameter of 18 mm or more, but not more than 19,05 mm for use in the manufacture of a two-stroke engine grass trimmer ( 2 ) 0 % — 31.12.2028 0.8651 ex 8414 59 25 50 Axial fans with built-in motor, for the generation of an air flow for the cooling of compressors and the distribution of air with — a direct current operating voltage of more than 10 V but not more than 14 V, or — an alternating current operating voltage of more than 185 V, but not more than 254 V, — an operating temperature of - 40 o C or higher, but not higher than 70 o C, for use in the manufacture of heat pump tumble dryers and refrigerators or freezers ( 2 ) 0 % — 31.12.2028 0.8648 ex 8414 59 35 40 Electric blower for cooling the battery module: — with an operating voltage of 9 VDC or more but not more than 16 VDC, — with a centrifugal electric fan, — with a connector, — with a plastic case, — with or without a control unit for the fan electric motor, for use in the production of rechargeable batteries for hybrid and electric vehicles ( 2 ) 0 % — 31.12.2028 0.8679 ex 8417 80 50 10 Pre-assembled process module unit of an ethane cracker unit, exceeding 29 meters in length, 35 meters in width and 66 meters in height and 5 500 metric ton in weight, containing two steam-cracking non-electric furnaces for de-hydrogenation as a part of an ethane cracker plant consisting of a radiation section and a convection section to produce ethylene and propylene from ethane 0 % — 30.06.2025 0.8669 ex 8419 40 00 10 Pre-assembled process module unit of an ethane cracker unit, containing: — quench water circulation loops, which contain a heat exchanger and circulation pumps to cool and recirculate quench water, — a water purification system, which removes hydrocarbon contaminants from quench water which is then re-used for dilution steam production (outside the module), — a pyrolysis oil purification system, which separates pyrolysis gasoline, heavy oil and coke fractions from the hydrocarbon contaminants that have been removed from the quench water, — an ethane feedstock start-up vaporizer and superheater, which vaporizes and heats ethane feedstock before sending the ethane to the cracking furnaces (outside the module), 0 % — 30.06.2025 — a propane feedstock preparation system, which filters, vaporizes and superheats propane feedstock, before sending the propane to cracking furnaces (outside the module), and — a chemical grade propylene preparation system, which filters and dries chemical grade propylene before sending it to the deethanizer (outside the module) 0.8680 ex 8419 50 80 20 Pre-assembled process module unit of an ethane cracker unit, containing: — an open loop ethylene refrigeration system, which is to be integrated with an external ethylene refrigerant compressor, — pumps and a heat exchanger to deliver ethylene to an external pipeline, and — a closed loop propylene refrigeration system, which is to be integrated with an external propylene refrigerant compressor 0 % — 30.06.2025 0.8675 ex 8419 89 98 10 Pre-assembled process module unit of an ethane cracker unit, containing: equipment associated with an external multi-stage, centrifugal cracked gas compressor which compresses hydrocarbon gases to allow further processing downstream in interconnected equipment containing: — coolers, — vapor-liquid separation drums, and — pumps needed to condense and remove water and heavier hydrocarbons and to avoid undesirable formation of polymer by-products, 0 % — 30.06.2025 equipment associated with an external caustic wash tower containing: — caustic water circulation pumps to support an external caustic wash tower in removing acid gasses (carbon dioxide and hydrogen sulphide) from the cracked gas, — a spent caustic pre-treatment system, containing separation drums, pumps and mixers, — a heat exchanger for the pre-cooling of cracked gas, and — a separation drum for the removal of water from cracker gas 0.8632 ex 8467 99 00 10 Pole hedge trimmer cutting elements: — in the form of hedge trimmer attachment, — with a knife length of 60 cm and teeth opening of 30 mm, — with angle adjustment of the blade, — with integrated single stage gearbox, — with a magnesium cast body, for use in the manufacture of garden machinery and power tools ( 2 ) 0 % — 31.12.2028 0.8673 ex 8479 89 97 33 Pre-assembled process module unit of an ethane cracker unit, containing: — various distillation columns (depropanizer, debutanizer and degreenoiler) and their associated heat exchangers, pumps and drums, — a chilling train containing heat exchangers and a drum which condenses C2 in a gas stream, — a system to separate hydrogen and methane from cracked gas containing heat exchangers, drums, turbines, compressors and a hydrogen purification unit (pressure swing adsorption unit), — associated equipment of a C3 splitter distillation column, containing heat exchanger, pumps and drums, and — a vinyl acetylene hydrogenation system, containing hydrogenation reactors, filters, mixer, drum, condenser, heat exchangers 0 % — 30.06.2025 0.8681 ex 8479 89 97 43 Pre-assembled process module unit of an ethane cracker unit, containing: — a system for filtering and cooling of dried cracked gas, — a deethanizer distillation column and associated equipment for C2-/C3+ separation, — an acetylene hydrogenation system to remove acetylene within a C2 stream, — a fuel gas drum that stores fuel gas for cracker furnaces, and — a system to regenerate dryers in a cracker installation 0 % — 30.06.2025 0.8626 ex 8483 40 23 20 Bevel gear: — made of lightweight alloys and steel, — built on straight or helical bevel gears, — with an angle between the shafts of 30 degrees or more but not more than 90 degrees — with a gear 1:1,3 ratio or more but not more than 1:1,46 , for use in the manufacture of grass trimmers, brushcutters and other types of garden machinery ( 2 ) 0 % — 31.12.2028 0.8625 ex 8483 40 23 30 Bevel gear: — made of lightweight alloys and steel, — built on straight bevel gears, — with an angle between the shafts of 24 degrees or more but not more than 35 degrees, for use in the manufacture of grass trimmers, brushcutters and other types of garden machinery ( 2 ) 0 % — 31.12.2028 0.8609 ex 8501 31 00 48 Brushless DC electric motors: — with a rated power of 240 W or more, but not more than 260 W, — with a voltage of 36 V or higher, but not higher than 52 V — with a torque of 20 Nm or more, but not more than 140 Nm, — with a housing made of aluminum, aluminum alloy or plastic, — with or without a built-in controller, — with a communication function in the LIN or UART interface, — weighing 1,5 kg or more, but not more than 5,0 kg, — adapted for mounting in a bicycle frame for use in the manufacture of e-bikes ( 2 ) 0 % — 31.12.2028 0.8608 ex 8501 31 00 49 Brushless DC electric motors: — with a rated power of 240 W or more, but not more than 260 W, — with voltage of 36 V or higher, but not higher than 52 V, — with torque of 30 Nm or more, but not more than 50 Nm, — with communication function UART or CAN interface, — with internal planetary gearbox with fixed or variable ratio, — made by CNC machined casting, — with housing made of aluminum, — weighing 2,3 kg or more, but not more than 4,4 kg, — adapted for mounting in the front or rear bicycle wheel ( 2 ) 0 % — 31.12.2028 0.8662 ex 8503 00 99 53 Pressure casted rotor cover of the cooling channel system in the electrical motor: — of EN AC-47100-F aluminum, — with a sealing cap of stainless steel, — shot-blasted and machined, — leakproof to the degree of 1 ml per minute or less under 2,75 bar pressure, — with a hardness of 70 HBW or more (2,5 /62,5 , according to ISO 6506), — with a tensile strength of 240 N/mm 2 or more, — with a height of 50 mm or more, but not more than 55 mm, — with a diameter of 109 mm or more, but not more than 112 mm, — with a weight of 3,9 kg or more but not more than 4,2 kg 0 % — 31.12.2028 0.8658 ex 8503 00 99 58 Pressure casted inner housing of a cooling channel system for an electrical motor: — of EN AC-47100 aluminum, — shot-blasted and machined, — leakproof to the degree of 3 ml per minute or less under 2,75 bar pressure, — with a hardness of 70 HBW or more (2,5 /62,5 , according to ISO 6506) — with a tensile strength of 240 N/mm 2 or more, — with a height of 225 mm or more, but not more than 280 mm, — with a diameter of 300 mm or more, but not more than 310 mm, — with a weight of 3,8 kg or more, but not more than 4,9 kg 0 % — 31.12.2028 0.8659 ex 8503 00 99 63 Pressure casted outer housing of an electrical motor: — of EN AC-47100 aluminum, — with overmolded bearing sleeves of martensitic stainless steel and assembled sealing caps of stainless steel, — shot-blasted and machined, — a rotor chamber, leakproof to the degree of 3 ml per minute or less under 2,75 bar pressure, — with a hardness of 70 HBW or more (2,5 /62,5 , according to ISO 6506) — with a tensile strength of 240 N/mm 2 or more, — with a height of 245 mm or more, but not more than 360 mm, — with a width of 360 mm or more, but not more than 525 mm, — with a length of 345 mm or more, but not more than 450 mm, — with a weight of 6,4 kg or more, but not more than 8,3 kg 0 % — 31.12.2028 0.8627 ex 8505 20 00 40 Electromagnetic clutch: — transmitting torque from the motor shaft to the cutting device pulley, — containing field coil, rotor, hub and armature, — with an operating voltage of 12 V — a current of 3,93 A current or more but not more than 6,86 A, — a resistance of 1,84 ohm or more but not more than 3,05 ohm (operating at 20 o C), — a static torque of 108 Nm or more but not more than 305 Nm for use in the manufacture of rider type self-propelled mowers ( 2 ) 0 % — 31.12.2028 0.8660 ex 8507 60 00 26 Modules for the assembly of electric accumulators using lithium ferrophosphate technology (LFP) with: — a length of 820 mm or more, but not more than 882 mm, — a width of 390 mm or more, but not more than 655 mm, — a height of 110 mm or more, but not more than 137 mm, — a weight of 60 kg or more, but not more than 165 kg, and — a power of 11 300 Wh or more, but not more than 29 360 Wh 1,3 % — 31.12.2028 0.8645 ex 8507 60 00 28 Lithium-ion rechargeable battery cell with: — a length of 190 mm or more but not more than 380 mm, — a width of 90 mm or more but not more than 150 mm, — a height of 4 mm or more but not more than 15 mm, — a weight of 0,1 kg or more but not more than 1,2 kg, — a nominal voltage of 3,0 VDC or more but not more than 4,0 VDC, — a nominal capacity of not more than 90 Ah, for use in the manufacture of rechargeable hybrid and electric vehicle batteries ( 2 ) 1,3 % — 31.12.2028 0.8654 ex 8507 60 00 36 Lithium-ion accumulator, with — multiple connected lithium-ion accumulator cells, — charging and monitoring electronics, — a power of 74 Wh or more, but not more than 75 Wh, — in a plastic housing with electrical connection contacts and LCD display, for use in the manufacture of cordless vacuum cleaners or rechargeable power sources therefor ( 2 ) 1,3 % — 31.12.2028 0.8628 ex 8511 80 00 30 Ignition module: — made with plastics and non-ferrous metals, — with the electric components cast in epoxy resin, — to generate the ignition energy and to electronically control the ignition timing, — to connect spark plug and circuit breaker, for use in the manufacture of two-stroke engines ( 2 ) 0 % — 31.12.2028 0.8633 ex 8512 20 00 25 An electrical component with an integrated LED, in an ABS housing, with: — a voltage of 11 V or more, but not more than 15 V, — a circular shape, — 2 terminals, — an outer diameter of the housing of 42,3 mm, — a diode voltage of 42 V or more, but not more than 48 V and — a current of 55 mA or more, but not more than 65 mA 0 % — 31.12.2028 0.8647 ex 8544 30 00 75 Wiring harness to connect the integrated battery system with the car’s control systems, containing: — an input waterproof connector, — four or more output connectors, — two or more plastic clips for attachment for use in the production of rechargeable batteries for hybrid and electric vehicles ( 2 ) 0 % — 31.12.2028 ( 1 ) Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013.’; ( 2 ) Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013.’.

Other acts of the same type

Source: EUR-Lex (Publications Office of the EU), © European Union, reuse permitted under Commission Decision 2011/833/EU.

What to look at next

Browse all EU Legal ActsEvery instrument by type and year, full text free to read section by sectionEuropean Union legislation EU Legal Acts by type and yearGrouped by instrument type and year of enactment, so you can find others of the same kindBrowse by type and year European Union: what this database coversWhich datasets are here, which official source they come from, and how current they areEuropean Union overview