Article 1
The references to harmonised standards for personal protective equipment drafted in support of Regulation (EU) 2016/425, listed in Annex I to this Decision, are hereby published in the Official Journal of the European Union .
資料由法律人 LawPlayer整理提供·EU law / curated by LawPlayer from EUR-Lex
Decision
Commission Implementing Decision (EU) 2026/1279 of 12 June 2026 on harmonised standards for personal protective equipment drafted in support of Regulation (EU) 2016/425 of the European Parliament and of the Council and repealing Commission Implementing Decision (EU) 2023/941
Article 2
Implementing Decision (EU) 2023/941 is repealed.
However, it shall continue to apply in respect of the references to harmonised standards listed in Annex II to this Decision until the dates of withdrawal of those references set out in that Annex.
Article 3
This Decision shall enter into force on the day of its publication in the Official Journal of the European Union .
Schedules & Appendices
ANNEX I
ANNEX I
No
Reference of the standard
1.
EN 136:1998
Respiratory protective devices – Full face masks – Requirements, testing, marking
EN 136:1998/AC:2003
2.
EN 137:2006
Respiratory protective devices – Self-contained open-circuit compressed air breathing apparatus with full face mask – Requirements, testing, marking
3.
EN 140:1998
Respiratory protective devices – Half masks and quarter masks – Requirements, testing, marking
EN 140:1998/AC:1999
4.
EN 142:2002
Respiratory protective devices – Mouthpiece assemblies – Requirements, testing, marking
5.
EN 143:2021
Respiratory protective devices – Particle filters – Requirements, testing, marking
6.
EN 144-1:2000
Respiratory protective devices – Gas cylinder valves – Part 1: Thread connections for insert connector
EN 144-1:2000/A1:2003
EN 144-1:2000/A2:2005
7.
EN 144-2:1998
Respiratory protective devices – Gas cylinder valves – Part 2: Outlet connections
8.
EN 144-3:2003
Respiratory protective devices – Gas cylinder valves – Part 3: Outlet connections for diving gases Nitrox and oxygen
EN 144-3:2003/AC:2003
9.
EN 145:1997
Respiratory protective devices – Self-contained closed-circuit breathing apparatus compressed oxygen or compressed oxygen-nitrogen type – Requirements, testing, marking
EN 145:1997/A1:2000
10.
EN 148-1:1999
Respiratory protective devices – Threads for facepieces – Part 1: Standard thread connection
11.
EN 148-2:1999
Respiratory protective devices – Threads for facepieces – Part 2: Centre thread connection
12.
EN 148-3:1999
Respiratory protective devices – Threads for facepieces – Part 3: Tread connection M 45 x 3
13.
EN 149:2001+A1:2009
Respiratory protective devices – Filtering half masks to protect against particles – Requirements, testing, marking
14.
EN 207:2017
Personal eye-protection equipment – Filters and eye-protectors against laser radiation (laser eye-protectors)
15.
EN 208:2009
Personal eye-protection – Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors)
16.
EN 250:2014
Respiratory equipment – Open-circuit self-contained compressed air diving apparatus – Requirements, testing and marking
17.
EN 342:2017
Protective clothing – Ensembles and garments for protection against cold
18.
EN 343:2019
Protective clothing – Protection against rain
19.
EN 352-1:2020
Hearing protectors – General requirements – Part 1: Earmuffs
Notice: This standard does not require labelling indicating the noise attenuation level on the product. Compliance with this standard therefore does not confer a presumption of conformity with point 3.5., second paragraph, of Annex II to Regulation (EU) 2016/425.
20.
EN 352-2:2020+A1:2024
Hearing protectors – General requirements – Part 2: Earplugs
Notice: This standard does not require labelling indicating the noise attenuation level on the product. Compliance with this standard therefore does not confer a presumption of conformity with point 3.5., second paragraph, of Annex II to Regulation (EU) 2016/425.
21.
EN 352-3:2020
Hearing protectors – General requirements – Part 3: Earmuffs attached to head protection and/or face protection devices
Notice: This standard does not require labelling indicating the noise attenuation level on the product. Compliance with this standard therefore does not confer a presumption of conformity with point 3.5., second paragraph, of Annex II to Regulation (EU) 2016/425.
22.
EN 352-4:2020
Hearing protectors – Safety requirements – Part 4: Level-dependent earmuffs
23.
EN 352-5:2020
Hearing protectors – Safety requirements – Part 5: Active noise reduction earmuffs
24.
EN 352-6:2020+A1:2024
Hearing protectors – Safety requirements – Part 6: Earmuffs with safety-related audio input
25.
EN 352-7:2020
Hearing protectors – Safety requirements – Part 7: Level-dependent earplugs
26.
EN 352-8:2020+A1:2024
Hearing protectors – Safety requirements – Part 8: Entertainment audio earmuffs
27.
EN 352-9:2020+A1:2024
Hearing protectors – Safety requirements – Part 9: Earplugs with safety-related audio input
28.
EN 352-10:2020+A1:2024
Hearing protectors – Safety requirements – Part 10: Entertainment audio earplugs
29.
EN 353-1:2014+A1:2017
Personal fall protection equipment – Guided type fall arresters including an anchor line – Part 1: Guided type fall arresters including a rigid anchor line
30.
EN 353-2:2024
Personal fall protection equipment – Part 2: Guided type fall arresters including a flexible anchor line
31.
EN 354:2010
Personal fall protection equipment – Lanyards
32.
EN 355:2002
Personal protective equipment against falls from a height – Energy absorbers
33.
EN 358:2018
Personal protective equipment for work positioning and prevention of falls from a height – Belts and lanyards for work positioning or restraint
34.
EN 360:2023
Personal fall protection equipment – Retractable type fall arresters
35.
EN 361:2002
Personal protective equipment against falls from a height – Full body harnesses
36.
EN 362:2004
Personal protective equipment against falls from a height – Connectors
37.
EN 365:2004
Personal protective equipment against falls from a height – General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging
EN 365:2004/AC:2006
38.
EN ISO 374-1:2016
Protective gloves against dangerous chemicals and micro-organisms – Part 1: Terminology and performance requirements for chemical risks (ISO 374-1:2016)
39.
EN ISO 374-5:2016
Protective gloves against dangerous chemicals and micro-organisms – Part 5: Terminology and performance requirements for micro-organisms risks (ISO 374-5:2016)
40.
EN 388:2016+A1:2018
Protective gloves against mechanical risks
41.
EN 397:2025
Industrial protective helmets
EN 397:2025/AC:2025
Notice: In clause 4.2.7.5.2.5 of the standard, where it reads ‘5.13’, it shall read ‘5.13.5’ instead.
Compliance with clause 4.2.7.4 of the standard provides presumption of conformity with essential health and safety requirement 3.6.1.
42.
EN 402:2003
Respiratory protective devices – Lung governed demand self-contained open-circuit compressed air breathing apparatus with full face mask or mouthpiece assembly for escape – Requirements, testing, marking
43.
EN 403:2004
Respiratory protective devices for self-rescue – Filtering devices with hood for escape from fire – Requirements, testing, marking
44.
EN 404:2005
Respiratory protective devices for self-rescue – Filter self-rescuer from carbon monoxide with mouthpiece assembly
45.
EN 405:2001+A1:2009
Respiratory protective devices – Valved filtering half masks to protect against gases or gases and particles – Requirements, testing, marking
46.
EN 407:2004
Protective gloves against thermal risks (heat and/or fire)
47.
EN 421:2010
Protective gloves against ionizing radiation and radioactive contamination
48.
EN 443:2008
Helmets for fire fighting in buildings and other structures
49.
EN 469:2020
Protective clothing for firefighters – Performance requirements for protective clothing for firefighting activities
50.
EN 510:2019
Specification for protective clothing for use where there is a risk of entanglement with moving parts
51.
EN 511:2006
Protective gloves against cold
52.
EN 564:2023
Mountaineering equipment – Accessory cord – Safety requirements and test methods
53.
EN 565:2017
Mountaineering equipment – Tape – Safety requirements and test methods
54.
EN 566:2017
Mountaineering equipment – Slings – Safety requirements and test methods
55.
EN 567:2013
Mountaineering equipment – Rope clamps – Safety requirements and test methods
56.
EN 568:2015
Mountaineering equipment – Ice anchors – Safety requirements and test methods
57.
EN 569:2007
Mountaineering equipment – Pitons – Safety requirements and test methods
58.
EN 659:2003+A1:2008
Protective gloves for firefighters
EN 659:2003+A1:2008/AC:2009
59.
EN 795:2012
Personal fall protection equipment – Anchor devices
Warning: This publication does not concern the equipment described in:
— type A (anchor devices with one or more stationary anchor points and with the need for structural anchors or fixing elements to fix to the structure) referred to in clauses 3.2.1, 4.4.1, 5.3;
— type C (anchor devices employing horizontal flexible anchor lines) referred to in clauses 3.2.3, 4.4.3 and 5.5;
— type D (anchor devices employing horizontal rigid anchor lines) referred to in clauses 3.2.4, 4.4.4 and 5.6;
— any combination of the above. In respect of types A, C and D, this publication does not concern either clauses: 4.5, 5.2.2, 6, 7; Annex A or Annex ZA. Accordingly, in respect of the equipment mentioned above, there shall be no presumption of conformity with the provisions of Regulation (EU) 2016/425 because they are not considered to be PPE.
60.
EN 812:2012
Industrial bump caps
61.
EN 813:2024
Personal fall protection equipment – Sit harnesses
62.
EN 892:2012+A3:2023
Mountaineering equipment – Dynamic mountaineering ropes – Safety requirements and test methods
63.
EN 893:2019
Mountaineering equipment – Crampons – Safety requirements and test methods
64.
EN 943-1:2015+A1:2019
Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols – Part 1: Performance requirements for Type 1 (gas-tight) chemical protective suits
65.
EN 943-2:2019
Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols – Part 2: Performance requirements for Type 1 (gas-tight) chemical protective suits for emergency teams (ET)
66.
EN 958:2024
Mountaineering equipment – Energy absorbing systems for use in klettersteig (via ferrata) climbing – Safety requirements and test methods
67.
EN 966:2012+A1:2012
Helmets for airborne sports
68.
EN 1073-1:2016+A1:2018
Protective clothing against solid airborne particles including radioactive contamination – Part 1: Requirements and test methods for compressed air line ventilated protective clothing, protecting the body and the respiratory tract
69.
EN 1073-2:2002
Protective clothing against radioactive contamination – Part 2: Requirements and test methods for non-ventilated protective clothing against particulate radioactive contamination
70.
EN 1077:2007
Helmets for alpine skiers and snowboarders
71.
EN 1078:2012+A1:2012
Helmets for pedal cyclists and for users of skateboards and roller skates
72.
EN 1080:2013
Impact protection helmets for young children
73.
EN 1082-1:1996
Protective clothing – Gloves and arm guards protecting against cuts and stabs by hand knives – Part 1: Chain mail gloves and arm guards
74.
EN 1082-2:2000
Protective clothing – Gloves and arm guards protecting against cuts and stabs by hand knives – Part 2: Gloves and arm guards made of material other than chain mail
75.
EN 1146:2005
Respiratory protective devices – Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape – Requirements, testing, marking
76.
EN 1149-5:2018
Protective clothing – Electrostatic properties – Part 5: Material performance and design requirements
77.
EN 1384:2023
Helmets for equestrian activities
78.
EN 1385:2012
Helmets for canoeing and white water sports
79.
EN 1486:2007
Protective clothing for fire-fighters – Test methods and requirements for reflective clothing for specialised fire-fighting
80.
EN 1497:2007
Personal fall protection equipment – Rescue harnesses
81.
EN 1827:1999+A1:2009
Respiratory protective devices – Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only – Requirements, testing, marking
82.
EN 1891:1998
Personal protective equipment for the prevention of falls from a height – Low stretch kernmantel ropes
83.
EN 1938:2010
Personal eye protection – Goggles for motorcycle and moped users
84.
EN ISO 10256-1:2024
Protective equipment for use in ice hockey - Part 1: General requirements (ISO 10256-1:2024)
85.
EN ISO 10256-2:2024
Protective equipment for use in ice hockey - Part 2: Head protectors for skaters (ISO 10256-2:2024)
86.
EN ISO 10256-3:2024
Protective equipment for use in ice hockey - Part 3: Face and eye protectors for skaters (ISO 10256-3:2024)
87.
EN ISO 10256-4:2024
Protective equipment for use in ice hockey - Part 4: Head and face protectors for goalkeepers (ISO 10256-4:2024)
88.
EN ISO 10819:2013
Mechanical vibration and shock – Hand-arm vibration – Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand (ISO 10819:2013)
EN ISO 10819:2013/A1:2019
EN ISO 10819:2013/A2:2022
89.
EN ISO 10862:2009
Small craft – Quick release system for trapeze harness (ISO 10862:2009)
90.
EN ISO 11393-2:2019
Protective clothing for users of hand-held chainsaws – Part 2: Performance requirements and test methods for leg protectors (ISO 11393-2:2018)
91.
EN ISO 11393-4:2019
Protective clothing for users of hand-held chainsaws – Part 4: Performance requirements and test methods for protective gloves (ISO 11393-4:2018)
92.
EN ISO 11393-5:2019
Protective clothing for users of hand-held chainsaws – Part 5: Performance requirements and test methods for protective gaiters (ISO 11393-5:2018)
93.
EN ISO 11393-6:2019
Protective clothing for users of hand-held chainsaws – Part 6: Performance requirements and test methods for upper body protectors (ISO 11393-6:2018)
94.
EN 12021:2014
Respiratory equipment – Compressed gases for breathing apparatus
95.
EN 12083:1998
Respiratory protective devices – Filters with breathing hoses, (Non-mask mounted filters) – Particle filters, gas filters, and combined filters – Requirements, testing, marking
EN 12083:1998/AC:2000
96.
EN 12270:2013
Mountaineering equipment – Chocks – Safety requirements and test methods
97.
EN 12275:2013
Mountaineering equipment – Connectors – Safety requirements and test methods
98.
EN 12276:2013
Mountaineering equipment – Frictional anchors – Safety requirements and test methods
99.
EN 12277:2015+A1:2018
Mountaineering equipment – Harnesses – Safety requirements and test methods
100.
EN 12278:2007
Mountaineering equipment – Pulleys – Safety requirements and test methods
101.
EN ISO 12312-1:2022
Eye and face protection - Sunglasses and related eyewear - Part 1: Sunglasses for general use (ISO 12312-1:2022)
EN ISO 12312-1:2022/A11:2024
102.
EN ISO 12312-2:2015
Eye and face protection – Sunglasses and related eyewear – Part 2: Filters for direct observation of the sun (ISO 12312-2:2015)
103.
EN ISO 12401:2009
Small craft – Deck safety harness and safety line – Safety requirements and test methods (ISO 12401:2009)
104.
EN ISO 12402-2:2020
Personal flotation devices – Part 2: Lifejackets, performance level 275 – Safety requirements (ISO 12402-2:2020)
Notice:
Application of clause 5.6 of this standard does not confer a presumption of conformity with the essential health and safety requirement set out in point 1.1.1. of Annex II to Regulation (EU) 2016/425.
Application of clauses 5.1.2, 5.1.3, 5.1.5, 5.1.7, 5.2, 5.3.1.1, 5.3.1.2, 5.3.2.2, 5.3.2.3, 5.3.4.3, 5.3.4.4, 5.6.1.4, 5.6.1.7, 5.6.1.8, 5.6.1.9, 5.6.1.10 and 5.6.1.11 of this standard does not confer a presumption of conformity with the essential health and safety requirement set out in point 1.2.1. of Annex II to Regulation (EU) 2016/425.
Application of clauses 5.1.2, 5.2, 5.3.1.1, 5.3.2.2, 5.3.4.2, 5.3.4.4, 5.6.3 and 5.7 of this standard does not confer a presumption of conformity with the essential health and safety requirement set out in point 3.4 of Annex II to Regulation (EU) 2016/425.
105.
EN ISO 12402-3:2020
Personal flotation devices – Part 3: Lifejackets, performance level 150 – Safety requirements (ISO 12402-3:2020)
Notice:
Application of clause 5.6 of this standard does not confer a presumption of conformity with the essential health and safety requirement set out in point 1.1.1. of Annex II to Regulation (EU) 2016/425.
Application of clauses 5.1.2, 5.1.3, 5.1.5, 5.1.7, 5.2, 5.3.1.1, 5.3.1.2, 5.3.2.2, 5.3.2.3, 5.3.4.3, 5.3.4.4, 5.6.1.4, 5.6.1.7, 5.6.1.8, 5.6.1.9, 5.6.1.10 and 5.6.1.11 of this standard does not confer a presumption of conformity with the essential health and safety requirement set out in point 1.2.1. of Annex II to Regulation (EU) 2016/425.
Application of clauses 5.1.2, 5.2, 5.3.1.1, 5.3.2.2, 5.3.4.2, 5.3.4.4, 5.6.3 and 5.7 of this standard does not confer a presumption of conformity with the essential health and safety requirement set out in point 3.4 of Annex II to Regulation (EU) 2016/425.
106.
EN ISO 12402-4:2020
Personal flotation devices – Part 4: Lifejackets, performance level 100 – Safety requirements (ISO 12402-4:2020)
Notice:
Application of clause 5.6 of this standard does not confer a presumption of conformity with the essential health and safety requirement set out in point 1.1.1. of Annex II to Regulation (EU) 2016/425.
Application of clauses 5.1.2, 5.1.3, 5.1.5, 5.1.7, 5.2, 5.3.1.1, 5.3.1.2, 5.3.2.2, 5.3.2.3, 5.3.4.3, 5.3.4.4, 5.6.1.4, 5.6.1.7, 5.6.1.8, 5.6.1.9, 5.6.1.10 and 5.6.1.11 of this standard does not confer a presumption of conformity with the essential health and safety requirement set out in point 1.2.1. of Annex II to Regulation (EU) 2016/425.
Application of clauses 5.1.2, 5.2, 5.3.1.1, 5.3.2.2, 5.3.4.2, 5.3.4.4, 5.6.3 and 5.7 of this standard does not confer a presumption of conformity with the essential health and safety requirement set out in point 3.4 of Annex II to Regulation (EU) 2016/425.
107.
EN ISO 12402-5:2020
Personal flotation devices – Part 5: Buoyancy aids (level 50) – Safety requirements (ISO 12402-5:2020)
108.
EN ISO 12402-6:2020
Personal flotation devices – Part 6: Special application lifejackets and buoyancy aids – Safety requirements and additional test methods (ISO 12402-6:2020)
109.
EN ISO 12402-8:2020
Personal flotation devices – Part 8: Accessories – Safety requirements and test methods (ISO 12402-8:2020)
110.
EN 12477:2001
Protective gloves for welders
EN 12477:2001/A1:2005
111.
EN 12492:2025
Mountaineering equipment – Helmets for mountaineers – Safety requirements and test methods
112.
EN 12841:2024
Personal fall protection equipment – Rope access systems – Rope adjustment devices
113.
EN 12941:2023
Respiratory protective devices – Powered filtering devices incorporating a loose fitting respiratory interface – Requirements, testing, marking
114.
EN 12942:2023
Respiratory protective devices – Powered filtering devices incorporating full face masks, half masks or quarter masks – Requirements, testing, marking
115.
EN 13034:2005+A1:2009
Protective clothing against liquid chemicals – Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment)
116.
EN 13061:2009
Protective clothing – Shin guards for association football players – Requirements and test methods
117.
EN 13089:2011+A3:2023
Mountaineering equipment – Ice-tools – Safety requirements and test methods
118.
EN 13138-1:2021
Buoyant aids for swimming instruction – Part 1: Safety requirements and test methods for buoyant aids to be worn
EN 13138-1:2021/AC:2022
119.
EN 13158:2018
Protective clothing – Protective jackets, body and shoulder protectors for equestrian use, for horse riders and those working with horses, and for horse drivers – Requirements and test methods
120.
EN 13178:2000
Personal eye-protection – Eye protectors for snowmobile users
121.
EN 13277-1:2000
Protective equipment for martial arts – Part 1: General requirements and test methods
122.
EN 13277-2:2000
Protective equipment for martial arts – Part 2: Additional requirements and test methods for instep protectors, shin protectors and forearm protectors
123.
EN 13277-3:2013
Protective equipment for martial arts – Part 3: Additional requirements and test methods for trunk protectors
124.
EN 13277-4:2001
Protective equipment for martial arts – Part 4: Additional requirements and test methods for head protectors
EN 13277-4:2001/A1:2007
125.
EN 13277-5:2002
Protective equipment for martial arts – Part 5: Additional requirements and test methods for genital protectors and abdominal protectors
126.
EN 13277-6:2003
Protective equipment for martial arts – Part 6: Additional requirements and test methods for breast protectors for females
127.
EN 13277-7:2009
Protective equipment for martial arts – Part 7: Additional requirements and test methods for hand and foot protectors
128.
EN 13277-8:2017
Protective equipment for martial arts – Part 8: Additional requirements and test methods for karate face protectors
129.
EN 13484:2012
Helmets for users of luges
130.
EN 13546:2002+A1:2007
Protective clothing – Hand, arm, chest, abdomen, leg, foot and genital protectors for field hockey goal keepers, and shin protectors for field players – Requirements and test methods
131.
EN 13567:2002+A1:2007
Protective clothing – Hand, arm, chest, abdomen, leg, genital and face protectors for fencers – Requirements and test methods
132.
EN 13594:2015
Protective gloves for motorcycle riders – Requirements and test methods
133.
EN 13634:2017
Protective footwear for motorcycle riders – Requirements and test methods
134.
EN ISO 13688:2013
Protective clothing – General requirements (ISO 13688:2013)
EN ISO 13688:2013/A1:2021
135.
EN 13781:2012
Protective helmets for drivers and passengers of snowmobiles and bobsleighs
136.
EN 13794:2002
Respiratory protective devices – Self-contained closed-circuit breathing apparatus for escape – Requirements, testing, marking
137.
EN 13832-2:2018
Footwear protecting against chemicals – Part 2: Requirements for limited contact with chemicals
138.
EN 13832-3:2018
Footwear protecting against chemicals – Part 3: Requirements for prolonged contact with chemicals
139.
EN 13949:2003
Respiratory equipment – Open-circuit self-contained diving apparatus for use with compressed Nitrox and oxygen – Requirements, testing, marking
140.
EN ISO 13982-1:2004
Protective clothing for use against solid particulates – Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) (ISO 13982-1:2004)
EN ISO 13982-1:2004/A1:2010
141.
EN ISO 13998:2003
Protective clothing – Aprons, trousers and vests protecting against cuts and stabs by hand knives (ISO 13998:2003)
142.
EN 14021:2003
Stone shields for off-road motorcycling suited to protect riders against stones and debris – Requirements and test methods
143.
EN 14052:2012+A1:2012
High performance industrial helmets
144.
EN 14058:2017+A1:2023
Protective clothing – Garments for protection against cool environments
145.
EN 14120:2003+A1:2007
Protective clothing – Wrist, palm, knee and elbow protectors for users of roller sports equipment – Requirements and test methods
146.
EN 14126:2003
Protective clothing – Performance requirements and tests methods for protective clothing against infective agents
EN 14126:2003/AC:2004
147.
EN 14143:2013
Respiratory equipment – Self-contained re-breathing diving apparatus
148.
EN 14225-1:2017
Diving suits – Part 1: Wet suits – Requirements and test methods
149.
EN 14225-2:2017
Diving suits – Part 2: Dry suits – Requirements and test methods
150.
EN 14225-3:2017
Diving suits – Part 3: Actively heated or cooled suit systems and components – Requirements and test methods
151.
EN 14328:2005
Protective clothing – Gloves and armguards protecting against cuts by powered knives – Requirements and test methods
152.
EN 14387:2004+A1:2008
Respiratory protective devices – Gas filter(s) and combined filter(s) – Requirements, testing, marking
153.
EN 14404-2:2024
Personal protective equipment – Knee protectors for work in the kneeling position – Part 2: Requirements for wearable knee protectors (type 1)
154.
EN 14404-3:2024
Personal protective equipment – Knee protectors for work in the kneeling position – Part 3: Requirements for the individual combination of knee pads and garments (type 2)
Notice: In addition to clauses 5.5.1.1, 5.5.1.2, 5.5.5.1 and 5.5.5.2, compliance with clause 5.5.1.3 is also necessary to confer presumption of conformity with essential requirement in point 1.3.1. of Annex II to Regulation (EU) 2016/425
155.
EN 14404-4:2024
Personal protective equipment – Knee protectors for work in the kneeling position – Part 4: Requirements for the combination of interoperable knee pads and garments (type 2)
156.
EN 14404-6:2024
Personal protective equipment – Knee protectors for work in the kneeling position – Part 6: Requirements for kneeling systems (type 4)
157.
EN 14435:2004
Respiratory protective devices – Self-contained open-circuit compressed air breathing apparatus with half mask designed to be used with positive pressure only – Requirements, testing, marking
158.
EN 14458:2018
Personal eye-equipment – High performance visors intended only for use with protective helmets
159.
EN ISO 14460:1999
Protective clothing for automobile racing drivers – Protection against heat and flame – Performance requirements and test methods (ISO 14460:1999)
EN ISO 14460:1999/AC:1999
EN ISO 14460:1999/A1:2002
160.
EN 14529:2005
Respiratory protective devices – Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only
161.
EN 14593-1:2005
Respiratory protective devices – Compressed air line breathing apparatus with demand valve – Part 1: Apparatus with a full face mask – Requirements, testing, marking
162.
EN 14594:2018
Respiratory protective devices – Continuous flow compressed air line breathing devices – Requirements, testing and marking
163.
EN 14605:2005+A1:2009
Protective clothing against liquid chemicals – performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4])
164.
EN ISO 14877:2002
Protective clothing for abrasive blasting operations using granular abrasives (ISO 14877:2002)
165.
EN ISO 15027-1:2012
Immersion suits – Part 1: Constant wear suits, requirements including safety (ISO 15027-1:2012)
166.
EN ISO 15027-2:2012
Immersion suits – Part 2: Abandonment suits, requirements including safety (ISO 15027-2:2012)
167.
EN 15090:2012
Footwear for firefighters
168.
EN 15151-1:2012
Mountaineering equipment – Braking devices – Part 1: Braking devices with manually assisted locking, safety requirements and test methods
169.
EN 15333-1:2008
Respiratory equipment – Open-circuit umbilical supplied compressed gas diving apparatus – Part 1: Demand apparatus
EN 15333-1:2008/AC:2009
170.
EN 15333-2:2009
Respiratory equipment – Open-circuit umbilical supplied compressed gas diving apparatus – Part 2: Free flow apparatus
171.
EN 15613:2008
Knee and elbow protectors for indoor sports – Safety requirements and test methods
172.
EN 16027:2011
Protective clothing – Gloves with protective effect for association football goal keepers
173.
EN ISO 16321-1:2022
Eye and face protection for occupational use – Part 1: General requirements (ISO 16321-1:2021)
174.
EN ISO 16321-2:2021
Eye and face protection for occupational use – Part 2: Additional requirements for protectors used during welding and related techniques (ISO 16321-2:2021)
Notice: This standard makes reference to normative reference EN ISO 16321-1:2020, the date of which is incorrect. It shall be read as EN ISO 16321-1:2022 instead.
175.
EN ISO 16321-3:2022
Eye and face protection for occupational use – Part 3: Additional requirements for mesh protectors (ISO 16321-3:2021)
Notice: This standard makes reference to normative reference EN ISO 16321-1:2020, the date of which is incorrect. It shall be read as EN ISO 16321-1:2022 instead.
176.
EN 16350:2014
Protective gloves – Electrostatic properties
177.
EN 16473:2014
Firefighters helmets – Helmets for technical rescue
178.
EN 16716:2017
Mountaineering equipment – Avalanche airbag systems – Safety requirements and test methods
179.
EN 17092-2:2020
Protective garments for motorcycle riders – Part 2: Class AAA garments – Requirements
180.
EN 17092-3:2020
Protective garments for motorcycle riders – Part 3: Class AA garments – Requirements
181.
EN 17092-4:2020
Protective garments for motorcycle riders – Part 4: Class A garments – Requirements
182.
EN 17092-5:2020
Protective garments for motorcycle riders – Part 5: Class B garments – Requirements
183.
EN 17092-6:2020
Protective garments for motorcycle riders – Part 6: Class C garments – Requirements
184.
EN 17109:2020+A1:2024
Mountaineering equipment – Individual safety systems for rope courses – Safety requirements and test methods
185.
EN ISO 17249:2013
Safety footwear with resistance to chain saw cutting (ISO 17249:2013)
EN ISO 17249:2013/AC:2014
186.
EN 17353:2020+A1:2025
Protective clothing - Enhanced visibility equipment for medium risk situations - Test methods and requirements
187.
EN 17487:2024
Protective clothing – Garments with permethrin as-treated articles supporting the protection against tick bites
188.
EN 17520:2021
Mountaineering equipment – Personal belay lanyards – Safety requirements and test methods
189.
EN 17961:2025
Mountaineering equipment - Load sharing devices - Safety requirements and test methods
190.
EN 18100:2025
Mountaineering equipment - Helmets for ski mountaineers - Safety requirements and test methods
191.
EN ISO 18527-1:2022
Eye and face protection for sports use – Part 1: Requirements for downhill skiing and snowboarding goggles (ISO 18527-1:2021)
192.
EN ISO 18527-2:2021
Eye and face protection for sports use – Part 2: Requirements for eye protectors for squash and eye protectors for racquetball and squash 57 (ISO 18527-2:2021)
193.
EN ISO 20320:2020
Protective clothing for use in Snowboarding – Wrist Protectors – Requirements and test methods (ISO 20320:2020)
194.
EN ISO 20345:2022
Personal protective equipment – Safety footwear (ISO 20345:2021)
EN ISO 20345:2022/A1:2024
195.
EN ISO 20346:2022
Personal protective equipment – Protective footwear (ISO 20346:2021)
EN ISO 20346:2022/A1:2024
196.
EN ISO 20347:2022
Personal protective equipment – Occupational footwear (ISO 20347:2021)
EN ISO 20347:2022/A1:2024
197.
EN ISO 20349-1:2017
Personal protective equipment – Footwear protecting against risks in foundries and welding – Part 1: Requirements and test methods for protection against risks in foundries (ISO 20349-1:2017)
EN ISO 20349-1:2017/A1:2020
198.
EN ISO 20349-2:2017
Personal protective equipment – Footwear protecting against risks in foundries and welding – Part 2: Requirements and test methods for protection against risks in welding and allied processes (ISO 20349-2:2017)
EN ISO 20349-2:2017/A1:2020
199.
EN ISO 20471:2013
High visibility clothing – Test methods and requirements (ISO 20471:2013, Corrected version 2013-06-01)
EN ISO 20471:2013/A1:2016
200.
EN ISO 21420:2020
Protective gloves - General requirements and test methods - Amendment 1 (ISO 21420:2020/Amd 1:2022)
EN ISO 21420:2020/A1:2024
201.
EN ISO 27065:2017
Protective clothing – Performance requirements for protective clothing worn by operators applying pesticides and for re-entry workers (ISO 27065:2017)
EN ISO 27065:2017/A1:2019
202.
EN 50321-1:2018
Live working – Footwear for electrical protection – Insulating footwear and overboots
EN 50321-1:2018/AC:2018-08
203.
EN 50365:2023
Live Working – Electrically insulating helmets for use on low and medium voltage installations
EN 50365:2023/AC:2024-09
204.
EN 61482-2:2020
Live working – Protective clothing against the thermal hazards of an electric arc – Part 2: Requirements (IEC 61482-2:2018, Modified)
ANNEX II
ANNEX II
No
Reference of the standard
Date of withdrawal
1.
EN 352-2:2020
Hearing protectors – General requirements – Part 2: Earplugs
Notice: This standard does not require labelling indicating the noise attenuation level on the product. Compliance with this standard therefore does not confer a presumption of conformity with point 3.5., second paragraph, of Annex II to Regulation (EU) 2016/425.
16.11.2026
2.
EN 352-6:2020
Hearing protectors – Safety requirements – Part 6: Earmuffs with safety-related audio input
14.08.2026
3.
EN 352-8:2020
Hearing protectors – Safety requirements – Part 8: Entertainment audio earmuffs
14.08.2026
4.
EN 352-9:2020
Hearing protectors – Safety requirements – Part 9: Earplugs with safety-related audio input
14.08.2026
5.
EN 352-10:2020
Hearing protectors – Safety requirements – Part 10: Entertainment audio earplugs
14.08.2026
6.
EN 353-2:2002
Personal protective equipment against falls from a height – Part 2: Guided type fall arresters including a flexible anchor line
16.11.2026
7.
EN 397:2012+A1:2012
Industrial safety helmets
16.12.2027
8.
EN 420:2003+A1:2009
Protective gloves – General requirements and test methods
16.12.2027
9.
EN 813:2008
Personal fall protection equipment – Sit harnesses
14.08.2026
10.
EN 958:2017
Mountaineering equipment – Energy absorbing systems for use in klettersteig (via ferrata) climbing – Safety requirements and test methods
16.11.2026
11.
EN ISO 12312-1:2013
Eye and face protection – Sunglasses and related eyewear – Part 1: Sunglasses for general use (ISO 12312-1:2013)
EN ISO 12312-1:2013/A1:2015
16.12.2027
12.
EN 12492:2012
Mountaineering equipment – Helmets for mountaineers – Safety requirements and test methods
16.12.2027
13.
EN 12941:1998
Respiratory protective devices – Powered filtering devices incorporating a helmet or a hood – Requirements, testing, marking
EN 12941:1998/A1:2003
EN 12941:1998/A2:2008
08.10.2026
14.
EN 12942:1998
Respiratory protective devices – Power assisted filtering devices incorporating full face masks, half masks or quarter masks – Requirements, testing, marking
EN 12942:1998/A1:2002
EN 12942:1998/A2:2008
08.10.2026
15.
EN 17109:2020
Mountaineering equipment – Individual safety systems for rope courses – Safety requirements and test methods
16.11.2026
16.
EN 17353:2020
Protective clothing – Enhanced visibility equipment for medium risk situations – Test methods and requirements
16.12.2027
5 articles
Cite this act
Commission Implementing Decision (EU) 2026/1279 of 12 June 2026 on harmonised standards for personal protective equipment drafted in support of Regulation (EU) 2016/425 of the European Parliament and of the Council and repealing Commission Implementing Decision (EU) 2023/941 (EUR-Lex). Retrieved via LawPlayer, https://lawplayer.com/eu/act/32026D1279
© European Union, https://eur-lex.europa.eu, 1998-2026. Reuse authorised under Commission Decision 2011/833/EU, provided the source is acknowledged.
本頁資料來源：EUR-Lex·整理提供：法律人 LawPlayer· lawplayer.com