Commission Implementing Regulation (EU) 2026/156 of 23 January 2026 granting a Union authorisation for the single biocidal product Nutrinova® Potassium Sorbate BFX Granules in accordance with Regulation (EU) No 528/2012 of the European Parliament and of the Council

Article 1

A Union authorisation with authorisation number EU-0035029-0000 is hereby granted to Nutrinova Germany GmbH for the making available on the market and use of the single biocidal product ‘Nutrinova® Potassium Sorbate BFX Granules’ in accordance with the summary of the biocidal product characteristics set out in the Annex. The Union authorisation is valid from 15 February 2026 until 31 January 2036.

Article 2

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union .

Summary of product characteristics for a biocidal product

ANNEXSupplementary provisions

ANNEX Summary of product characteristics for a biocidal product Nutrinova® Potassium Sorbate BFX Granules Product type(s) PT06: Preservatives for products during storage Authorisation number : EU-0035029-0000 R4BP asset number : EU-0035029-0000 1.    ADMINISTRATIVE INFORMATION 1.1.    Trade name(s) of the product Trade name(s) Nutrinova® Potassium Sorbate BFX Granules Nutrinova® Potassium Sorbate BFX MB 1.2.    Authorisation holder Name and address of the authorisation holder Name Nutrinova Germany GmbH Address Am Unisys Park 1 65843 Sulzbach (Taunus) Germany Authorisation number   EU-0035029-0000 R4BP asset number   EU-0035029-0000 Date of the authorisation   15 February 2026 Expiry date of the authorisation   31 January 2036 1.3.    Manufacturer(s) of the product Name of manufacturer Nutrinova Germany GmbH Address of manufacturer Am Unisys Park 1 65843 Sulzbach (Taunus) Germany Location of manufacturing sites Frankfurt Hoechst FI Industriepark Höchst 65926 Frankfurt/Main Germany 1.4.    Manufacturer(s) of the active substance(s) Active substance potassium (E,E)-hexa-2,4-dienoate Name of manufacturer Nutrinova Germany GmbH Address of manufacturer Am Unisys Park 1 65843 Sulzbach (Taunus) Germany Location of manufacturing sites Frankfurt Hoechst FI Industriepark Höchst 65926 Frankfurt/Main Germany 2.    PRODUCT COMPOSITION AND FORMULATION 2.1.    Qualitative and quantitative information on the composition of the product Common name IUPAC name Function CAS number EC number Content (%) potassium (E,E)-hexa-2,4-dienoate potassium hexa-2,4-dienoate Active substance 24634-61-5 246-376-1 100 % (w/w) 2.2.    Type(s) of formulation SG Water soluble granule 3.    HAZARD AND PRECAUTIONARY STATEMENTS Hazard statements H319: Causes serious eye irritation. Precautionary statements P264: Wash face, hands and any exposed skin thoroughly after handling. P280: Wear eye protection/face protection. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337+P313: If eye irritation persists: Get medical advice. P337+P313: If eye irritation persists: Get medical attention. 4.    AUTHORISED USE(S) 4.1.    Use description Table 1 Washing and cleaning fluids and other detergents, and the raw materials thereof Product type PT06: Preservatives for products during storage Target organism(s) (including development stage) Common name: yeasts Field(s) of use indoor use In-can preservation of aqueous cleaning products and detergents during shelf life. This includes dishwashing liquids, fabric conditioners, fabric detergents and hard surface cleaners. Application method(s) Method: - Manual or automated dosage Detailed description: The product is added manually to the mixing tank containing the product to be preserved. If necessary, an aqueous pre-solution containing a maximum of 50 % (w/w) of the product can be made before it is added manually or semi-automatically to the mixing tank. The product or pre-solution is added at a suitable point during the production cycle, with good stirring to ensure an even distribution. The addition can take place at any stage of the production of the product. For optimal preservation, the earliest possible addition is recommended. Application rate(s) and frequency Application Rate: 0,1 - 0,8 % (w/w) active substance Number and timing of application: One application per batch produced. Category(ies) of users industrial Pack sizes and packaging material 25 kg flexible LDPE (low-density polyethylene) bags 4.1.1.    Use-specific instructions for use See general direction for use. 4.1.2.    Use-specific risk mitigation measures See general direction for use. 4.1.3.    Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general direction for use. 4.1.4.    Where specific to the use, the instructions for safe disposal of the product and its packaging See general direction for use. 4.1.5.    Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general direction for use. 4.2.    Use description Table 2 Enzyme preparations Product type PT06: Preservatives for products during storage Target organism(s) (including development stage) Common name: Bacteria Common name: yeasts Field(s) of use indoor use In-can preservation of enzyme preparations for the production of detergents, paper and textile treatment and fuel ethanol production. Application method(s) Method: - Manual or automated dosage Detailed description: The product is added manually to the mixing tank containing the product to be preserved. If necessary, an aqueous pre-solution containing a maximum of 50 % (w/w) of the product can be made before it is added manually or semi-automatically to the mixing tank. The product or pre-solution is added at a suitable point during the production cycle, with good stirring to ensure an even distribution. The addition can take place at any stage of the production of the product. For optimal preservation, the earliest possible addition is recommended. Application rate(s) and frequency Application Rate: 0,1 - 1,2 % (w/w) active substance Number and timing of application: One application per batch produced. Category(ies) of users industrial Pack sizes and packaging material 25 kg flexible LDPE (low-density polyethylene) bags 4.2.1.    Use-specific instructions for use See general direction for use. 4.2.2.    Use-specific risk mitigation measures See general direction for use. 4.2.3.    Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general direction for use. 4.2.4.    Where specific to the use, the instructions for safe disposal of the product and its packaging See general direction for use. 4.2.5.    Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general direction for use. 5.    GENERAL DIRECTIONS FOR USE   ( 1 ) 5.1.    Instructions for use Ensure that the final formulation does not exceed pH 6,5, since the preventive properties of the active substance against growth of microorganisms diminishes at pH above 7. Microbiological tests to prove adequacy of preservation have to be undertaken by the user in order to determine the effective dose of the preservative for the specific matrix/location/system. If needed, consult the authorisation holder (as specified in the label). Comply with the instructions for use. 5.2.    Risk mitigation measures Wear protective chemical resistant gloves meeting the requirements of European Standard EN ISO 374 or equivalent during product handling phase (glove material to be specified by the authorisation holder within the product information). Wear a protective coverall (at least type 6, EN 13034 or equivalent) which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information). The use of eye protection (chemical resistant google) meeting the requirements of European Standard EN ISO 16321 or equivalent during handling of the product is mandatory. The use of these protective equipment is without prejudice to the application of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work. See section 6 for the full reference to this act and the European Standards. The biocidal product must not be used for the preservation of products or materials which may come in direct contact with food, feed and livestock. 5.3.    Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment IF SWALLOWED: Rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call a POISON CENTRE or a doctor. IF ON SKIN: Wash skin with water. If symptoms occur call a POISON CENTRE or a doctor. IF IN EYES: Rinse with water. Remove contact lenses, if present and easy to do. Continue rinsing for 5 minutes. Call a POISON CENTRE or a doctor. IF INHALED: If symptoms occur call a POISON CENTRE or a doctor. 5.4.    Instructions for safe disposal of the product and its packaging Dispose of contents and container in accordance with national regulation 5.5.    Conditions of storage and shelf-life of the product under normal conditions of storage The product shall be stored in the originally closed packaging. Store dry (max. 65 % relative humidity) and at temperatures not exceeding 30 °C. Shelf life: 1 year. 6.    OTHER INFORMATION Full titles of EN standards referenced in section ‘Use-specfic risk mitigation measures’ are: EN ISO 16321 – Eye and face protection for occupational use – Part 1: General requirements. EN ISO 374 – Protective gloves against dangerous chemicals and micro-organisms. Part 1: terminology and performance requirements for chemical risks. EN 13034 – Protective clothing against liquid chemicals. Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment). Council Directive 98/24/EC of 7 April 1998 on the protection of the health and safety of workers from the risks related to chemical agents at work (fourteenth individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC) ( OJ L 131, 5.5.1998, p. 11 ). With respect to the ‘Category(ies) of users’ note: ‘Professionals (including industrial users)’ means trained professionals if this is required by national legislation. ( 1 )   Instructions for use, risk mitigation measures and other directions for use under this section are valid for any authorised uses.