Commission Implementing Regulation (EU) 2026/387 of 23 February 2026 establishing the format of the European technical assessment pursuant to Regulation (EU) 2024/3110 of the European Parliament and of the Council

Article 1

The format of the European technical assessment is set out in the Annex.

Article 2

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union .

Format of the European technical assessment

ANNEXSupplementary provisions

ANNEX Format of the European technical assessment Where the ETA is printable, the fields must be provided in a way that allows clear identification. In human- and machine-readable ETAs the information must be provided in a formally structured way which is publicly available. Fields to be included in the ETA: 1. List of fields to be included in printable ETA only (a) logo of the technical assessment body issuing the ETA; (b) logo of the European organisation for technical assessment; (c) signature (at the end of the document excluding annexes). 2. List of fields included in machine-readable ETA only (a) identification code of the structured format used (schema) with version; (b) permalink to the information describing the structured format used (data template and data dictionary); (c) digital signature. 3. List of fields to be included in the general part of the ETA (printable and human- and machine-readable formats) (a) reference to Regulation (EU) 2024/3110; (b) ETA code; (c) version number of the ETA; (d) ETA version superseded, if any; (e) date of issue of the ETA; (f) language of the ETA; (g) identification number of the technical assessment body issuing the ETA; (h) name of the technical assessment body issuing the ETA; (i) address of the technical assessment body issuing the ETA; (j) trade name of the product covered by the ETA; (k) full code of the EAD used for issuing the ETA; (l) title of the EAD used for issuing the ETA in English; (m) manufacturer; (n) address of the manufacturer; (o) manufacturing plants covered by the ETA (field to be repeated where ETA covers more than one address of the manufacturing plant): (1) address; (2) code, if address is to be treated as confidential information; (p) number of pages of the ETA; (q) number of non-confidential annexes to the ETA, if any; (r) number of confidential annexes to the ETA, if any; (s) reference to the annex containing confidential information and not included in the ETA when publicly disseminated, if any (field to be repeated where more than one annex is provided). 4. List of fields to be included in the specific part of the Eta (printable and human- and machine-readable formats) (a) technical description of the product or of the range of products covered by the ETA; (b) further specification of the intended uses in accordance with the applicable EAD; (c) performance assessment results of the product, including the assessment of the performance for the predetermined environmental essential characteristics in accordance with Article 15(3) of Regulation (EU) 2024/3110 and the necessary information to ensure digitalisation guidelines provided in the EAD including the following information for each essential characteristic: (1) name of the essential characteristic; (2) unambiguous reference to the applicable assessment method; (3) the physical quantity of the performance expressed according to the SI metric system: time (T), length (L), mass (M), electric current (I), thermodynamic temperature (K), amount of substance (N) and luminous intensity (J), a derivation of SI base units or a ratio; (4) expression of results as a level, class or description; (5) units in which the performance is provided or dimensionless; (6) additional information necessary to interpret the information provided; (d) assessment and verification system to be applied (field to be repeated in case of more than one assessment and verification system are applicable); (e) the technical details not included in the EAD necessary for the implementation of the assessment and verification system, if any; (f) reference to the legal base setting out the applicable assessment and verification system (field to be repeated in case of more than one legal base are applicable); (g) the technical details necessary for the implementation of the assessment and verification system. 5. List of fields to be included in relation to the responsible person in the technical assessment body for issuing the ETA (a) name of the responsible person; (b) position of the responsible person.