Commission Implementing Regulation (EU) 2026/2266 of 13 October 2026 laying down detailed provisions for the application of Directive (EU) 2025/2205 of the European Parliament and of the Council as regards mobile driving licences
Commission Implementing Regulation (EU) 2026/2266 of 13 October 2026 laying down detailed provisions for the application of Directive (EU) 2025/2205 of the European Parliament and of the Council as regards mobile driving licences
Version historyWe hold this version only; in force from 2026-10-13.
Data as of 2026-11-04 · Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗
This Regulation applies to the issuance and management of mobile driving licences issued by Member States in accordance with Directive (EU) 2025/2205 and, in the case of Article 9, to the exchange of mobile driving licences issued by third countries.
For the purposes of this Regulation, the following definitions apply:
(1)
‘mobile security object’ means a data structure within a mobile driving licence that is used to protect the integrity and origin of the data elements of that mobile driving licence;
(2)
‘issuing authority’ means the public administrative body of the Member State of issuance under whose responsibility the mobile driving licence is issued;
(3)
‘technical validity period’ means the period of validity of the mobile security object;
(4)
‘revoke’ means to terminate the validity of the mobile security object of a mobile driving licence.
1. Issuing authorities shall ensure that the mobile driving licences they issue comply with the technical specifications set out in Annex I.
2. Mobile driving licences shall be issued as qualified electronic attestations of attributes or as electronic attestations of attributes issued by or on behalf of public sector bodies responsible for an authentic source in accordance with Regulation (EU) No 910/2014. Issuing authorities shall ensure that the protocols and interfaces referred to in Article 4 of Implementing Regulation (EU) 2024/2982 are used to issue mobile driving licences to European Digital Identity Wallets.
3. Issuing authorities shall ensure that the information contained in a valid mobile driving licence is accurate.
Security and verification of mobile driving licences
1. Where issuing authorities or entities acting on their behalf are required to report security incidents in accordance with Article 24(2), first subparagraph, point (fb), of Regulation (EU) No 910/2014 or Article 23 of Directive (EU) 2022/2555, they shall also notify the Commission of those security incidents, where both the following conditions are fulfilled:
(a)
the security incident affects the issuance or validity of mobile driving licences;
(b)
pursuant to those legislative acts, the Commission would not otherwise be informed about the security incident.
2. Verification of the authenticity and validity of mobile driving licences shall be performed using the technical means of verification laid down in accordance with Regulation (EU) No 910/2014.
Member States may also use the EU driving licence network to verify the validity and authenticity of driving licences, in accordance with Article 22(1) and (2) of Directive (EU) 2025/2205.
1. Member States shall inform the Commission of any design elements, guidance or requirements that they establish for the visual appearance of the mobile driving licences issued by them. The Commission shall make such information available to the other Member States.
2. The Commission shall publish, on its website, the visual appearance of mobile driving licences communicated to it by Member States.
Technical validity and validity management of mobile driving licences
1. Issuing authorities may issue mobile driving licences with any technical validity period.
Without prejudice to the administrative validity of the driving licence, upon the lapse of its technical validity period, the mobile driving licence shall expire.
2. Issuing authorities shall revoke a mobile driving licence which they issued with a technical validity period of more than one hour in at least the following circumstances:
(a)
where the wallet unit attestation of a wallet unit to which a mobile driving licence was issued has been revoked;
(b)
where another Member State or a third country has informed the Member State of issuance that the holder of the driving licence has either requested the exchange of her or his driving licence or was obliged to exchange it, and that Member State or third country has decided to exchange the driving licence;
(c)
where another Member State has informed the Member State of issuance that the holder of the mobile driving licence has requested the replacement of her or his driving licence, and that Member State has decided to replace the driving licence;
(d)
where the Member State of issuance has knowledge that the driving licence, the recognition of its validity, or the right to drive has been cancelled, withdrawn, suspended or restricted;
(e)
where the Member State of issuance has been notified by another Member State of a confiscation in accordance with paragraph 3, first subparagraph.
3. The EU driving licence network shall enable the management of mobile driving licences in situations where the driving licence is to be confiscated by the relevant authorities of a Member State in accordance with its national legislation. The EU driving licence network shall provide for the possibility of users, explicitly authorised by the Member State where the driving licence is to be confiscated, to notify the Member State of issuance of such confiscations.
Upon receiving a notification under the first subparagraph, the Member State of issuance shall:
(a)
immediately take the steps to comply with the procedures prescribed under points (b), (c) and (d), including by revoking, as soon as possible, the current mobile driving licence, if issued with a technical validity period of more than one hour;
(b)
inform the user of the current mobile driving licence that, if relevant, their current mobile driving licence has been revoked or will be soon revoked, and that a new mobile driving licence is available for issuance;
(c)
upon request from the holder, issue a new mobile driving licence to the holder;
(d)
include, in the namespace containing relevant information for implementing field 14 of the new mobile driving licence, as set out in Part D, point (5), of Annex I to Directive (EU) 2025/2205, and of all subsequent mobile driving licences it issues to the holder, the following sentence, in its own official language or in English:
‘On [date of confiscation], confiscated in the territory of [EU distinguishing sign of the confiscating Member State]. Confiscation is in effect until [as notified by the confiscating Member State through the EU driving licence network].’.
That sentence shall be included until the period specified therein has passed.
4. The procedure laid down in paragraph 3 of this Article shall be without prejudice to the national legislation of Member States on the confiscation of driving licences, in particular on the possibility to confiscate a physical driving licence instead of or together with the procedures set out in that paragraph, and without prejudice to the procedures laid down in Articles 15a to 15g of Directive (EU) 2025/2205.
1. By 3 November 2027, Member States shall submit to the Commission the information on the issuing authorities of mobile driving licences set out in Annex II. Such information shall be transmitted through a secure electronic channel made available by the Commission.
2. Member States shall immediately notify the Commission of any modifications to the information submitted in accordance with paragraph 1.
Technical, security and operational interoperability standards for the exchange or cross-border replacement of mobile driving licences
1. As part of the national procedures to exchange a driving licence issued by another Member State, the Member State performing the exchange shall:
(a)
check in which formats the applicant holds a driving licence, as part of the procedures prescribed in Article 13(1) of Directive (EU) 2025/2205;
(b)
after the checks referred to in point (a) are successfully concluded, notify the Member State that issued the driving licence about the exchange through the EU driving licence network;
(c)
if relevant, require the surrender of the physical driving licence of the applicant for exchange.
For the purposes of the checks referred to in first subparagraph, point (a), the requested Member State shall use the information made available through the EU driving licence network.
2. After receiving the notification referred to in paragraph 1, first subparagraph, point (b), the Member State that issued the driving licence that is being exchanged shall:
(a)
where the holder of the driving licence that is being exchanged holds a mobile driving licence, take all the following steps:
(i)
assess, as soon as possible and in accordance with its national procedures, whether the request is accurate and whether it does not contain manifest errors;
(ii)
after the assessment in accordance with point (i) is successfully concluded, or after any issues in relation to the notification are resolved:
—
revoke, as soon as possible, the mobile driving licence, if issued with a technical validity period of more than one hour,
—
if relevant, immediately inform the user that their current mobile driving licence has been revoked or will be revoked soon,
—
immediately undertake to no longer issue the mobile driving licence being exchanged;
(iii)
immediately inform the Member State performing the exchange of the steps taken pursuant to point (ii);
(b)
where the holder of the driving licence that is being exchanged does not hold a mobile driving licence, immediately and automatically inform the Member State performing the exchange that it has received the notification.
3. After receiving the information referred to in paragraph 2, point (a)(iii), or in paragraph 2, point (b), of this Article, and, if relevant, after the physical driving licence has been surrendered, the Member State performing the exchange shall take at least one of the following steps:
(a)
make the exchanged mobile driving licence available for the holder for issuance;
(b)
immediately issue a physical driving licence in accordance with the applicable national rules.
4. In accordance with Article 13(4) of Directive (EU) 2025/2205, where the replacement of a driving licence is requested in a Member State other than the Member State of issuance, the replacing Member State shall apply mutatis mutandis the procedures set out in paragraphs 1 to 3 of this Article.
Minimum technical, security and operational interoperability specifications for exchanging mobile driving licences issued by third countries
1. Notwithstanding laws regulating the recognition and exchange of driving licences issued by third countries, where a Member State provides for the exchange of a physical driving licence issued by a third country, the Member State shall also inquire whether the holder of the physical driving licence also holds the driving licence in a mobile format.
Where the holder of the physical driving licence issued by the third country also holds the driving licence in a mobile format, the exchanging Member State shall take both the following steps:
(a)
request the third country to revoke the mobile driving licence being exchanged, and to no longer issue the exchanged mobile driving licence to the holder;
(b)
register the fact that the exchanged driving licence was available in a mobile format in the exchanging Member State’s national driving licence register, for the purpose of disclosing that information through the EU driving licence network.
2. Notwithstanding laws regulating the recognition and exchange of driving licences issued by third countries, where a Member State provides for the exchange of a mobile driving licence issued by a third country that does not have a physical format, the Member State may consider the mobile driving licence surrendered within the meaning of Article 15(5) of Directive (EU) 2025/2205 if all of the following criteria are fulfilled:
(a)
the third country which issued the mobile driving licence undertakes to provide for a stable and trusted manner of communication with the Member State performing the exchange;
(b)
the third country which issued the mobile driving licence provides trustworthy and verifiable information to the Member State performing the exchange on the formats in which the holder holds their driving licence;
(c)
the third country which issued the mobile driving licence provides the possibility for the Member State performing the exchange to notify the third country about the exchange of the mobile driving licence in a trusted and verifiable manner, should the Member State decide to inform them;
(d)
the third country which issued the mobile driving licence undertakes, at the request of the Member State performing the exchange, to no longer issue the exchanged mobile driving licence to the holder and to revoke it within a reasonable timeframe, and in a verifiable and irrevocable manner.
ANNEX I
Technical specifications referred to in Article 3
1.
Mobile driving licence format
Issuing authorities shall ensure issuance of mobile driving licences in ISO/IEC-mdoc format as specified in the technical specifications referred to in Annex II to Commission Implementing Regulation (EU) 2024/2979 ( 1 ) .
2.
Mobile driving licence data model
Clause 7 of the standard ISO/IEC 18013-5:2021 shall apply with the following adaptations:
(1)
in Clause 7.2.1, the first sentence shall be replaced by the following.
‘The mDL data elements shall be as defined in Table 5 and belong to the namespaces indicated.’;
(2)
in Table 5, a new column ‘Namespace’ shall be added. For the data elements included in the standard, the value ‘org.iso.18013.5.1’ shall be inserted in the column ‘Namespace’;
(3)
the following entries in Table 5 shall be adapted and all other entries shall remain unchanged:
Identifier
Property adapted
Value in the standard
Value that shall be used in accordance with this Regulation and Annex I, Part D of Directive (EU) 2025/2205
family_name
Definition
Last name, surname, or primary identifier, of the mDL holder.
The value shall only use latin1 b characters and shall have a maximum length of 150 characters
Field 1 – surname of the holder
The value shall only use latin1 b characters and shall have a maximum length of 150 characters
family_name
Presence
M
M
given_name
Definition
First name(s), other name(s), or secondary identifier, of the mDL holder.
The value shall only use latin1 b characters and shall have a maximum length of 150 characters
Field 2 – other name(s) of the holder
The value shall only use latin1 b characters and shall have a maximum length of 150 characters
given_name
Presence
M
M
birth_date
Definition
Day, month and year on which the mDL holder was born. If unknown, approximate date of birth
First part of Field 3 – date of birth
birth_date
Presence
M
M
birth_place
Definition
Country and municipality or state/province where the mDL holder was born.
The value shall only use latin1 b characters and shall have a maximum length of 150 characters
Second part of Field 3 – place of birth
The distinguishing sign of the Member State as specified in Annex I, Part D, point (1) of Directive (EU) 2025/2205, or the state, province, district, or local area or the municipality, city, town, or village where the user to whom the person identification data relates was born, or, if not already covered, any other value present on the physical driving licence.
The value shall only use latin1 b characters and shall have a maximum length of 150 characters
birth_place
Presence
O
M
issue_date
Definition
Date when mDL was issued
Field 4a – Date of issue of the driving licence
issue_date
Encoding format
tdate or fulldate
fulldate
issue_date
Presence
M
M
expiry_date
Definition
Date when mDL expires
Field 4b – Date of expiry of the driving licence
expiry_date
Encoding format
tdate or fulldate
fulldate
expiry_date
Presence
M
M
issuing_authority
Definition
Issuing authority name.
The value shall only use latin1 b characters and shall have a maximum length of 150 characters
Field 4c – name of the issuing authority
The value shall only use latin1 b characters and shall have a maximum length of 150 characters
issuing_authority
Presence
M
M
administrative_number
Definition
An audit control number assigned by the issuing authority.
The value shall only use latin1 b characters and shall have a maximum length of 150 characters
Field 4d – a number different from that under field 5, for administrative purposes
The value shall only use latin1 b characters and shall have a maximum length of 150 characters
administrative_number
Presence
O
O
document_number
Definition
The number assigned or calculated by the issuing authority.
The value shall only use latin1 b characters and shall have a maximum length of 150 characters.
Field 5 – number of the driving licence
The value shall only use any latin1 b characters, including letters and shall have a maximum length of 150 characters.
document_number
Presence
M
M
Portrait
Definition
A reproduction of the mDL holder’s portrait. See 7.2.2
Field 6 – photograph of the holder
See 7.2.2.
Portrait
Presence
M
M
signature_usual_mark
Definition
Image of the signature or usual mark of the mDL holder, see 7.2.7
Field 7 – signature of the holder
See 7.2.7.
signature_usual_mark
Presence
O
O
resident_address
Definition
The place where the mDL holder resides and/or may be contacted (street/house number, municipality, etc.).
The value shall only use latin1 b characters and shall have a maximum length of 150 characters
Field 8 – holder’s permanent place of residence, or postal address
The value shall only use latin1 b characters and shall have a maximum length of 150 characters
resident_address
Presence
O
O
(4)
in Table 5, the following rows shall be added:
Namespace
Identifier
Meaning
Definition
Presence
Encoding format
org.iso.18013.5.1.EU
driving_privileges_eu
Categories of vehicles and restrictions/conditions
Field 9 – category of vehicle(s) the holder is entitled to drive
Field 10 – date of first issue of each category, except if not available
Field 11 – date of expiry of each category
Field 12 – additional information/restriction(s), in code form, as specified in Annex I, Part E of Directive (EU) 2025/2205
M
DrivingPrivilegesEU
See 7.2.4
org.iso.18013.5.1.EU
administrative_information
Field 14, as per Annex I, Part D of Directive (EU) 2025/2205
Field 14 – An entry by the Member State of issuance of information essential for administering the licence or related to road safety.
This information may, in particular, be based on information received from another Member State and may include any cancellation, withdrawal, suspension or any restriction of the right to drive of a driver of a power-driven vehicle, of his or her driving licence, such as one limited to certain categories or to the territory of certain Member States.
With the specific written agreement of the holder, information which is not related to the administration of the driving licence or to road safety may also be added in this field; such addition shall not alter in any way the use of the item as a driving licence
O
tstr
(5)
in Clause 7.2.4, the following text shall be added:
‘The European Union driving privileges structure contains information describing the driving privileges of the holder in accordance with Directive (EU) 2025/2205.
The European Union driving privileges structure shall be encoded as CBOR and shall be formatted as follows:
DrivingPrivilegesEU = [
* DrivingPrivilegeEU
]
DrivingPrivilegeEU = {
"vehicle_category_code": tstr
;
Driving licence category code
as per Article 6
of Directive (EU) 2025/2205
? "issue_date": full-date
;
Date of first issue of the category
[mandatory unless not available]
"expiry_date": full-date
;
Date of expiry of the category
? "codes": [+ CodeEU]
}
CodeEU = {
"code": tstr
;
Code as per Annex I, Part E of
Directive (EU) 2025/2205
? "sign": tstr
;
Sign as per ISO/IEC 18013-2 Annex A
? "value": tstr
;
Value as per ISO/IEC 18013-2 Annex A
}
The “sign” pair, if present, shall have a value of “<”, “=”, “>”, or a valid combination thereof. If the “sign” pair is present, the “value” pair shall be present as well. The value shall be a decimal number, encoded as a text string. The unit in which the value is expressed shall be included in either the definition of the vehicle subcategory or in the code description.
NOTE 3 The DrivingPrivilegesEU structure can be an empty array.
If the categories of vehicle(s) the holder is entitled to drive include a category not set out in Article 6 of Directive (EU) 2025/2205, such category may be included in a Member State specific namespace, in accordance with the requirements for domestic namespaces in Clause 7.2.8.’
( 1 ) Commission Implementing Regulation (EU) 2024/2979 of 28 November 2024 laying down rules for the application of Regulation (EU) No 910/2014 of the European Parliament and of the Council as regards the integrity and core functionalities of European Digital Identity Wallets ( OJ L, 2024/2979, 4.12.2024, ELI: http://data.europa.eu/eli/reg_impl/2024/2979/oj ).
Notifications of information on issuing authorities of mobile driving licences and on the mechanisms enabling the authentication and validation of mobile driving licences
ANNEX II
Notifications of information on issuing authorities of mobile driving licences and on the mechanisms enabling the authentication and validation of mobile driving licences
Member States shall provide the following information to the Commission on each issuing authority of mobile driving licences:
(a)
the name of the issuing authority;
(b)
where applicable, the registration number of the issuing authority;
(c)
the country code of the Member State in which the issuing authority is established;
(d)
the contact email and contact phone number of the issuing authority, for matters related to the mobile driving licences it issues;
(e)
the URL of the webpage that contains the policies, terms and conditions of the issuing authority, that apply to the provision and use of the mobile driving licences it issues;
(f)
where applicable, the URL of the webpage that contains additional information about the issuing authority;
(g)
results of interoperability testing, in accordance with a template to be provided by the Commission;
(h)
one or more certificates with a country code matching the country code of the Member State under point (c) and compliant with clause 7 or 8 of ETSI TS 119 412-6 v1.2.1 (2026-04) ( 1 ) that may be used to verify the signature or seal created by the issuing authority on the mobile driving licences it issues, and for which the certified identity data include the name, and where applicable, the registration number of the issuing authority, as specified in points (a) and (b), respectively.
( 1 ) Electronic Signatures and Trust Infrastructures (ESI); Certificate Profiles; Part 6: Certificate profile requirements for PID, Wallet, EAA, QEAA, and PSBEAA providers.