ANNEX ISupplementary provisions
SANITARY APPLIANCES Sinks, basins and communal troughs; bath tubs; shower trays; bidets; urinals; water closet bowls or pans; earth, chemical and composting closets; macerating toilets; squatting toilets; flushing cisterns; whirlpool baths; shower and bath screens or enclosures. Modular public toilets and toilet pods with finishes using materials classified in reaction to fire classes A, B or C and for which the reaction to fire performance is not susceptible to change during the production process (in general, those made with non-combustible raw materials), as well as with materials classified in classes D, E or F. ANNEX II SANITARY APPLIANCES Modular public toilets and toilet pods with finishes using materials classified in reaction to fire classes A, B or C for which the reaction to fire performance is susceptible to change during the production process (in general, those made with combustible raw materials). ANNEX III PRODUCT FAMILY SANITARY APPLIANCES (1/1) System of attestation of conformity For the product(s) and intended use(s) listed below, European Committee for Standardization/European Committee for Electrotechnical Standardization (CEN/Cenelec) are requested to specify the following system(s) of attestation of conformity in the relevant harmonized standard(s): >TABLE> The specification for the system should be such that it can be implemented even where performance does not need to be determined for a certain characteristic, because at least one Member State has no legal requirement at all for such characteristic (see Article 2 (1) of Directive 89/106/EEC and, where applicable, clause 1.2.3. of the Interpretative Documents). In those cases the verification of such a characteristic must not be imposed on the manufacturer if he does not wish to declare the performance of the product in that respect.