ANNEX ISupplementary provisions
Fibres For use other than those specified in Annex II. Concrete protection and repair products For use with low performance requirements in buildings and civil engineering works, for which the reaction to fire class, if required, is not A(1), B(2), C(3). (1) Materials for which the reaction to fire performance is susceptible to change during production (in general, those subject to chemical modification, e.g. fire retardants, or where changes of composition may lead to changes in reaction to fire performance). (2) Materials for which the reaction to fire performance is susceptible to change during production (in general, those subject to chemical modification, e.g. fire retardants, or where changes of composition may lead to changes in reaction to fire performance). (3) Materials for which the reaction to fire performance is susceptible to change during production (in general, those subject to chemical modification, e.g. fire retardants, or where changes of composition may lead to changes in reaction to fire performance). ANNEX II Fibres For structural use in concrete, mortar and grout. Concrete protection and repair products For use in buildings and civil engineering works other than those specified in Annex I. Admixtures: Additions (Type I) Additions (Type II) For use in concrete, mortar and grout. ANNEX III Note: for products having more than one of the intended uses specified in the following families, the tasks for the approved body, derived from the relevant systems of attestation of conformity, are cumulative. PRODUCT FAMILY: PRODUCTS RELATED TO CONCRETE, MORTAR AND GROUT (1/2) Systems of attestation of conformity For the product(s) and intended use(s) listed below, CEN/Cenelec are requested to specify the following system(s) of attestation of conformity in the relevant harmonised standard(s). >TABLE> System 1+: See Directive 89/106/EEC, Annex III(2)(i), with audit-testing of samples. System 1: See Directive 89/106/EEC, Annex III(2)(i), without audit-testing of samples. System 2+: See Directive 89/106/EEC, Annex III(2)(ii), first possibility, including certification of the factory production control by an approved body on the basis of initial inspection of factory and of factory production control as well as of continuous surveillance, assessment and approval of factory production control. System 3: See Directive 89/106/EEC, Annex III(2)(ii), second possibility. System 4+: See Directive 89/106/EEC, Annex III(2)(ii), third possibility. The specification for the system should be such that it can be implemented even where performance does not need to be determined for a certain characteristic, because at least one Member State has no legal requirement at all for such a characteristic (see Article 2(1) of Directive 89/106/EEC and, where applicable, point 1.2.3 of the Interpretative Documents). In those cases the verification of such a characteristic must not be imposed on the manufacturer if he does not wish to declare the performance of the product in that respect. PRODUCT FAMILY: PRODUCTS RELATED TO CONCRETE, MORTAR AND GROUT (2/2) Systems of attestation of conformity For the product(s) and intended use(s) listed below, CEN/Cenelec are requested to specify the following system(s) of attestation of conformity in the relevant harmonised standard(s): >TABLE> System 1: See Directive 89/106/EEC, Annex III.2.(i), without audit-testing of samples. System 3: See Directive 89/106/EEC, Annex III.2.(ii)., second possibility. System 4: See Directive 89/106/EEC, Annex III.2.(ii), third possibility. The specification for the system should be such that it can be implemented even where performance does not need to be determined for a certain characteristic, because at least one Member State has no legal requirement at all for such a characteristic (see Article 2(1) of Directive 89/106/EEC and, where applicable, clause 1.2.3 of the Interpretative Documents). In those cases the verification of such a characteristic must not be imposed on the manufacturer if he does not wish to declare the performance of the product in that respect.