ANNEX VSupplementary provisions
ANNEX V Annex V to Directive 2002/72/EC is amended as follows: (1) Part A is replaced by the following: ‘Part A: General specifications Plastic material and articles shall not release primary aromatic amines in a detectable quantity (DL = 0,01 mg/kg of food or food simulant). The migration of the primary aromatic amines appearing in the lists in Annex II and III is excluded from this restriction.’ (2) In Part B, the following new specifications are inserted, in the appropriate numerical order: Ref. No OTHER SPECIFICATIONS ‘42080 Carbon black Specifications: — Toluene extractables: maximum 0,1 %, determined according to ISO method 6209. — UV absorption of cyclohexane extract at 386 nm: < 0,02 AU for a 1 cm cell or < 0,1 AU for a 5 cm cell, determined according to a generally recognised method of analysis. — Benzo(a)pyrene content: max 0,25 mg/kg carbon black. — Maximum use level of carbon black in the polymer: 2,5 % w/w 72081/10 Petroleum hydrocarbon resins (hydrogenated) Specifications: Petroleum hydrocarbon resins, hydrogenated are produced by the catalytic or thermal polymerisation of dienes and olefins of the aliphatic, alicyclic and/or monobenzenoid arylalkene types from distillates of cracked petroleum stocks with a boiling range not greater than 220 °C, as well as the pure monomers found in these distillation streams, subsequently followed by distillation, hydrogenation and additional processing. Properties: Viscosity: > 3 Pa.s at 120 °C. Softening point: > 95 °C as determined by ASTM Method E 28-67. Bromine number: < 40 (ASTM D1159) The colour of a 50 % solution in toluene < 11 on the Gardner scale Residual aromatic monomer ≤ 50 ppm 76845 Polyester of 1,4-butanediol with caprolactone MW fraction < 1 000 is less than 0,5 % (w/w) 81500 Polyvinylpyrrolidone The substance shall meet the purity criteria established in Commission Directive 96/77/EC ( *1 ) 88640 Soybean oil, epoxidized Oxirane < 8 %, iodine number < 6 ( *1 ) OJ L 339, 30.12.1996, p. 1 .’