My bookmarksSign up free

Commission Directive 2008/43/EC of 4 April 2008 setting up,… Article 7

Commission Directive 2008/43/EC of 4 April 2008 setting up,… Article 7

Plain detonators and fuses

Article 7

For plain detonators or fuses, the unique identification shall consist of an adhesive label or direct printing or stamping on the detonator shell. An associated label shall be placed on each case of detonators or fuses. In addition, undertakings may use a passive inert electronic tag attached to each detonator or fuse, and an associated tag for each case of detonators or fuses.

Read the full instrument → · Read this in context: CHAPTER 2 — PRODUCT IDENTIFICATION →

Other provisions in CHAPTER 2 — PRODUCT IDENTIFICATION

Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗ · Data as of 2026-07-04

CitationArticle 7 of Commission Directive 2008/43/EC of 4 April 2008 setting up,… (LawPlayer, data as of 2026-07-04)

© European Union, https://eur-lex.europa.eu, 1998-2026. Reuse authorised under Commission Decision 2011/833/EU, provided the source is acknowledged.

What to look at next

Commission Directive 2008/43/EC of 4 April 2008 setting up,…, full textChapter navigation and full text, so you can read this section in contextEuropean Union legislationEU Legal Acts by type and yearGrouped by instrument type and year of enactment, so you can find others of the same kindBrowse by type and yearCHAPTER 2 — PRODUCT IDENTIFICATION — read this in contextThe surrounding text of the act in order, so you can see what comes before and afterChapters and sections