Regulation (EC) No 765/2008 ANNEX II

CE marking

ANNEX IISupplementary provisions

ANNEX II CE marking 1. The CE marking shall consist of the initials ‘CE’ taking the following form: 2. If the CE marking is reduced or enlarged, the proportions given in the graduated drawing in paragraph 1 shall be respected. 3. Where specific legislation does not impose specific dimensions, the CE marking shall be at least 5 mm high.

Read the full instrument →

Other provisions in Regulation (EC) No 765/2008

ANNEX I: Requirements applicable to the body to be recognised under Article 14

Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗ · Data as of 2026-07-04

CitationANNEX II of Regulation (EC) No 765/2008 (LawPlayer, data as of 2026-07-04)

What to look at next

Regulation (EC) No 765/2008, full textChapter navigation and full text, so you can read this section in contextEuropean Union legislation EU Legal Acts by type and yearGrouped by instrument type and year of enactment, so you can find others of the same kindBrowse by type and year European Union: what this database coversWhich datasets are here, which official source they come from, and how current they areEuropean Union overview