ANNEX IISupplementary provisions
ANNEX II DATA TO BE REGISTERED AND FORMAT For each authorised type of vehicle ERATV shall include the following data: — identification of the type, — manufacturer, — conformity with the TSIs, — authorisations granted in different Member States, including general information about these authorisations, their status (active, suspended or withdrawn), list of parameters for which conformity with national rules has been checked, — technical characteristics. The data to be registered in ERATV for each type of vehicle and their format shall be as indicated below. The data to be registered depend on the category of the vehicle as indicated below. The values indicated for the parameters related to the technical characteristics shall be those recorded in the technical documentation accompanying the type examination certificate. In the cases where possible values for a parameter are limited to a predefined list, these lists shall be maintained and updated by the Agency. For the types of vehicle that are not in conformity with all the relevant TSIs in force, the national safety authority that has granted the type authorisation may limit the information to be provided on the technical characteristics indicated in Section 4 below to the parameters that have been checked according to the applicable rules. Parameter Data format Applicability to vehicle categories (Yes, No, Optional, Open Point) 1. Traction vehicles 2. Hauled passenger vehicles 3. Freight wagons 4. Special vehicles 0 Identification of the type Heading (no data) 0.1 TYPE ID [number] XX-XXX-XXXX-X (according to Annex III) Y Y Y Y 0.2 Versions included in this type [number] XXX + [character string] (according to Annex III) Y Y Y Y 0.3 Date of record in ERATV [date] DD-MM-YYYY Y Y Y Y 1 General information Heading (no data) 1.1 Type name [character string] (max 256 characters) O O O O 1.2 Alternative type name [character string] (max 256 characters) O O O O 1.3 Manufacturer’s name [character string] (max 256 characters) Selection from a predefined list, possibility to add new manufacturers Y Y Y Y 1.4 Category [character string] Selection from a predefined list (according to Annex III) Y Y Y Y 1.5 Subcategory [character string] Selection from a predefined list (according to Annex III) Y Y Y Y 2 Conformity with TSIs Heading (no data) 2.1 Conformity with TSI For each TSI: [character string] Y/N/Partial/Not applicable Selection from a predefined list of vehicle related TSIs (both in force and those that were previously in force) (multiple selection possible) Y Y Y Y 2.2 Reference of ‘EC type examination certificates’ (if module SB applied) and/or ‘EC design examination certificates’ (if module SH1 applied) [character string] (possibility to indicate several certificates, e.g. certificate for rolling stock subsystem, certificate for CCS, etc.) Y Y Y Y 2.3 Applicable specific cases (specific cases conformity with which has been assessed) [character string] Selection from a predefined list (multiple selection possible) based on TSIs (for each TSI marked as Y or P) Y Y Y Y 2.4 Sections of TSI not complied with [character string] Selection from a predefined list (multiple selection possible) based on TSIs (for each TSI marked as P) Y Y Y Y 3 Authorisations Heading (no data) 3.1 Authorisation in Heading (no data) 3.1.1 Member State of authorisation [character string] Selection from a predefined list Codes are those officially published and updated on the European website in the Interinstitutional style guide Y Y Y Y 3.1.2 Current status Heading (no data) 3.1.2.1 Status [character string] + [date]Field automatically filled in by the system. Possible options: ActiveSuspended DD-MM-YYYY, Withdrawn DD-MM-YYYY, Expired DD-MM-YYYY Y Y Y Y 3.1.2.2 Validity of authorisation (if defined) [date] DD-MM-YYYY Y Y Y Y 3.1.2.3 Coded restrictions [character string] Code assigned by the Agency Y Y Y Y 3.1.2.4 Non-coded restrictions [character string] Y Y Y Y 3.1.3 Historical Heading (no data) 3.1.3.1 Original authorisation Heading (no data) Y Y Y Y 3.1.3.1.1 Date [date] DD-MM-YYYY Y Y Y Y 3.1.3.1.2 Authorisation holder [character string] (max 256 characters) Selection from a predefined list, possibility to add new organisations Y Y Y Y 3.1.3.1.3 Authorisation document reference [character string] (EIN) Y Y Y Y 3.1.3.1.4 National certificate references (if applicable) [character string] Y Y Y Y 3.1.3.1.5 Parameters for which conformity to applicable national rules has been assessed [character string] Selection from a predefined list (multiple selection possible) based on Commission Decision 2009/965/EC Y Y Y Y 3.1.3.1.6 Comments [character string] (max 1 024 characters) O O O O 3.1.3.X Modification of authorisation Heading (no data) (X is progressive from 2 onwards, as many times as modifications of the authorisation of type have been issued) Y Y Y Y 3.1.3.X.1 Type of modification [character string] Text from a predefined list (modification, suspension, reactivation, withdrawal) Y Y Y Y 3.1.3.X.2 Date [date] DD-MM-YYYY Y Y Y Y 3.1.3.X.3 Authorisation holder (if applicable) [character string] (max 256 characters) Selection from a predefined list, possibility to add new organisations Y Y Y Y 3.1.3.X.4 Authorisation modification document reference [character string] Y Y Y Y 3.1.3.X.5 National certificate references (if applicable) [character string] Y Y Y Y 3.1.3.X.6 Applicable national rules (if applicable) [character string] Selection from a predefined list (multiple selection possible) based on Commission Decision 2009/965/EC Y Y Y Y 3.1.3.X.7 Comments [character string] (max 1 024 characters) O O O O 3.X Authorisation in Heading (no data) (X is progressive incremented by one unit from 2 onwards each time an authorisation for this type has been granted (including the suspended and withdrawn ones)). This Section contains same fields as 3.1 Y Y Y Y 4 Technical characteristics of the vehicle Heading (no data) 4.1 General technical characteristics Heading (no data) 4.1.1 Number of driving cabs [Number] 0/1/2 Y Y Y Y 4.1.2 Speed Heading (no data) 4.1.2.1 Maximum design speed [Number] km/h Y Y Y Y 4.1.2.2 Maximum speed when empty [Number] km/h N N Y N 4.1.3 Wheel set gauge [character string] Selection from predefined list Y Y Y Y 4.1.4 Conditions of use regarding train formation [character string] Selection from a predefined list Y Y N Y 4.1.5 Maximum number of trainsets or locomotives coupled together in multiple operation. [number] Y N N N 4.1.6 Number of elements in the rake of freight wagons (only for subcategory ‘rake of freight wagons’) [number] N N Y N 4.1.7 Letter marking [character string] Selection from a predefined list (according to Annex P of OPE TSI) N N Y N 4.1.8 Type meets the requirements necessary for validity of the vehicle authorisation granted by one Member State in other Member States [character string] Selection from a predefined list Y Y Y Y 4.1.9 Dangerous goods for which the vehicle is suitable (tank code) [character string] Tank code N N Y N 4.1.10 Structural category [character string] Selection from a predefined list Y Y Y Y 4.2 Vehicle kinematic gauge Heading (no data) 4.2.1 Vehicle kinematic gauge (interoperable gauge) [character string] Selection from predefined list (more than one possible) (the list will be different for different categories depending on the applicable TSI) Y Y Y Y 4.2.2 Vehicle kinematic gauge (other gauges assessed using the kinematic method) [character string] Selection from predefined list (more than one possible) O O O O 4.3 Environmental conditions Heading (no data) 4.3.1 Temperature range [character string] Selection from a predefined list (more than one possible) Y Y Y Y 4.3.2 Altitude range [character string] Selection from a predefined list Y Y N Y 4.3.3 Snow, ice and hail conditions [character string] Selection from a predefined list Y Y N Y 4.3.4 Ballast pick up (for v ≥ 190 km/h vehicles only) Open point OP OP N N 4.4 Fire safety Heading (no data) 4.4.1 Fire safety category [character string] Selection from a predefined list Y Y N Y 4.5 Design mass and loads Heading (no data) 4.5.1 Permissible payload for different line categories [number] t for line category [character string] OP OP Y OP 4.5.2 Design mass Heading (no data) 4.5.2.1 Design mass in working order [number] kg Y Y O Y 4.5.2.2 Design mass under normal payload [number] kg Y Y O Y 4.5.2.3 Design mass under exceptional payload [number] kg Y Y N Y 4.5.3 Static axle load Heading (no data) 4.5.3.1 Static axle load in working order [number] kg Y Y O Y 4.5.3.2 Static axle load under normal payload/maximum payload for freight wagons [number] kg Y Y O Y 4.5.3.3 Static axle load under exceptional payload [number] kg Y Y N Y 4.5.4 Quasi-static guiding force (if exceeds the limit defined in TSI or not defined in the TSI) [number] kN Y Y N Y 4.6 Rolling stock dynamic behaviour Heading (no data) 4.6.1 Cant deficiency (maximum uncompensated lateral acceleration) for which the vehicle has been assessed [number] mm For dual gauge vehicles, values for each gauge shall be indicated Y Y O Y 4.6.2 Vehicle equipped with a cant deficiency compensation system (tilting vehicle) [Boolean] Y/N Y Y Y Y 4.6.3 In service limits of equivalent conicity (or worn wheel profile) for which the vehicle has been tested Open point OP OP OP OP 4.7 Braking Heading (no data) 4.7.1 Maximum train deceleration [number] m/s 2 Y N N Y 4.7.2 Service braking Heading (no data) 4.7.2.1 Brake performance on steep gradients with normal payload Heading (no data) 4.7.2.1.1 Reference case of TSI [character string] from a predefined list Y Y Y Y 4.7.2.1.2 Speed (if no reference case is indicated) [number] km/h Y Y Y Y 4.7.2.1.3 Gradient (if no reference case is indicated) [number] ‰ (mm/m) Y Y Y Y 4.7.2.1.4 Distance (if no reference case is indicated) [number] km Y Y Y Y 4.7.2.1.5 Time (if distance is not indicated) (if no reference case is indicated) [number] min Y Y Y Y 4.7.3 Parking brake Heading (no data) 4.7.3.1 All vehicles of this type must be equipped with a parking brake (parking brake mandatory for vehicles of this type) [Boolean] Y/N N N Y Y 4.7.3.2 Parking brake type (if the vehicle is fitted with it) [character string] from a predefined list Y Y Y Y 4.7.3.3 Maximum gradient on which the unit is kept immobilised by the parking brake alone (if the vehicle is fitted with it) [number] ‰ (mm/m) Y Y Y Y 4.7.4 Braking systems fitted on the vehicle Heading (no data) 4.7.4.1 Eddy current brake Heading (no data) 4.7.4.1.1 Eddy current brake fitted [Boolean] Y/N Y Y N Y 4.7.4.1.2 Possibility of preventing the use of the eddy current brake (only if fitted with eddy current brake) [Boolean] Y/N Y Y N Y 4.7.4.2 Magnetic brake Heading (no data) 4.7.4.2.1 Magnetic brake fitted [Boolean] Y/N Y Y N Y 4.7.4.2.2 Possibility of preventing the use of the magnetic brake (only if fitted with magnetic brake) [Boolean] Y/N Y Y N Y 4.7.4.3 Regenerative brake (only for vehicles with electrical traction) Heading (no data) 4.7.4.3.1 Regenerative brake fitted [Boolean] Y/N Y N N Y 4.7.4.3.2 Possibility of preventing the use of the regenerative brake (only if fitted with regenerative brake) [Boolean] Y/N Y N N Y 4.8 Geometrical characteristics Heading (no data) 4.8.1 Vehicle length [number] m Y Y Y Y 4.8.2 Minimum in-service wheel diameter [number] mm Y Y Y Y 4.8.3 Shunting restrictions [Boolean] Y/N N N Y N 4.8.4 Minimum horizontal curve radius capability [number] m Y Y Y Y 4.8.5 Minimum vertical convex curve radius capability [number] m O O O O 4.8.6 Minimum vertical concave curve radius capability [number] m O O O O 4.8.7 Height of loading platform (for flat wagons and combined transport) [number] mm N N Y N 4.8.8 Suitability for transport on ferries [Boolean] Y/N Y Y Y Y 4.9 Equipment Heading (no data) 4.9.1 Type of end coupling (indicating tensile and compressive forces) [Character string] From a predefined list (multiple selection possible) Y Y Y Y 4.9.2 Axle bearing condition monitoring (hot axles box detection) [Character string] From a predefined list (multiple selection possible) Y Y Y Y 4.9.3 Flange lubrication Heading (no data) 4.9.3.1 Flange lubrication fitted [Boolean] Y/N Y Y N Y 4.9.3.2 Possibility of preventing the use of the lubrication device (only if fitted with flange lubrication) [Boolean] Y/N Y N N Y 4.10 Energy supply Heading (no data) 4.10.1 Energy supply system [Character string] From a predefined list (multiple selection possible) Y Y N Y 4.10.2 Maximum power (to be indicated for each energy supply system the vehicle is equipped for) [Number] kW for [energy supply system automatically prefilled in] O O N O 4.10.3 Maximum rated current from the catenary (to be indicated for each electrical energy supply system the vehicle is equipped for) [Number] A for [Voltage automatically prefilled in] Y Y N Y 4.10.4 Maximum current at standstill per pantograph (to be indicated for each DC systems the vehicle is equipped for) [Number] A for [Voltage automatically prefilled in] Y Y N Y 4.10.5 Height of interaction of pantograph with contact wires (over top of rail) (to be indicated for each energy supply system the vehicle is equipped for) [Number] From [m] to [m] (with two decimals) Y Y N Y 4.10.6 Pantograph head (to be indicated for each energy supply system the vehicle is equipped for) [Character string] for [energy supply system automatically prefilled in] From a predefined list (multiple selection possible) Y Y N Y 4.10.7 Number of pantographs in contact with the overhead contact line (OCL) (to be indicated for each energy supply system the vehicle is equipped for) [Number] Y Y N Y 4.10.8 Shortest distance between two pantographs in contact with the OCL (to be indicated for each energy supply system the vehicle is equipped for; to be indicated for single and, if applicable, multiple operation) (only if number of raised pantographs is more than 1) [Number] [m] Y Y N Y 4.10.9 Type of OCL used for the test of current collection performance (to be indicated for each energy supply system the vehicle is equipped for) (only if number of raised pantographs is more than 1) [Character string] for [energy supply system automatically prefilled in] From a predefined list (multiple selection possible) Y N N Y 4.10.10 Material of pantograph contact strip the vehicle may be equipped with (to be indicated for each energy supply system the vehicle is equipped for) [Character string] for [energy supply system automatically prefilled in] From a predefined list (multiple selection possible) Y Y N Y 4.10.11 Automatic dropping device (ADD) fitted (to be indicated for each energy supply system the vehicle is equipped for) [Boolean] Y/N Y Y N Y 4.10.12 TSI conform energy meter for billing purposes installed on board [Boolean] Y/N Y Y N Y 4.11 Noise related characteristics Heading (no data) 4.11.1 Pass-by noise level (dB(A)) [Number] (dB(A)) O O O O 4.11.2 Pass-by noise level was measured under reference conditions [Boolean] Y/N Y Y Y Y 4.11.3 Stationary noise level (dB(A)) [Number] (dB(A)) O O O O 4.11.4 Starting noise level (dB(A)) [Number] (dB(A)) O N N O 4.12 Passenger related characteristics Heading (no data) 4.12.1 General passenger related characteristics Heading (no data) 4.12.1.1 Number of fixed seats From [Number] to [Number] O O N N 4.12.1.2 Number of toilets [Number] O O N N 4.12.1.3 Number of sleeping places From [Number] to [Number] O O N N 4.12.2 PRM related characteristics Heading (no data) 4.12.2.1 Number of priority seats From [Number] to [Number] Y Y N N 4.12.2.2 Number of wheelchair spaces From [Number] to [Number] Y Y N N 4.12.2.3 Number of PRM accessible toilets [Number] Y Y N N 4.12.2.4 Number of wheelchair accessible sleeping places From [Number] to [Number] Y Y N N 4.12.3 Passenger access and egress Heading (no data) 4.12.3.1 Platform heights for which the vehicle is designed. [Number] from predefined list (multiple selection possible) Y Y N N 4.12.3.2 Description of any integrated boarding aids (if provided) [Character string] Selection from a predefined list (multiple selection possible) Y Y N N 4.12.3.3 Description of any portable boarding aids if considered in the design of the vehicle for meeting the PRM TSI requirements [Character string] Selection from a predefined list (multiple selection possible) Y Y N N 4.13 On-board CCS equipment (for vehicles with a driving cab only) Heading (no data) 4.13.1 Signalling Heading (no data) 4.13.1.1 ETCS equipment on-board and its level [Character string] From a predefined list Y Y Y Y 4.13.1.2 ETCS baseline.version (x.y). If the version is not fully compatible it shall be indicated in brackets [Character string] From a predefined list Y Y Y Y 4.13.1.3 ETCS on-board equipment for reception of infill-function information via loop or GSM-R [Character string] From a predefined list (more than one option possible) Y Y Y Y 4.13.1.4 ETCS national applications implemented (NID_XUSER of Packet 44) [Number] From a predefined list according to the List of ETCS Variables (more than one option possible) Y Y Y Y 4.13.1.5 Class B or other train protection, control and warning systems installed (system and, if applicable, version) [Character string] From a predefined list (more than one option possible) Y Y Y Y 4.13.1.6 Special conditions implemented on-board to switch over between different train protection, control and warning systems. [Character string] From combination of systems installed on board (‘System XX’/‘System YY’) (more than one option possible) Y Y Y Y 4.13.2 Radio Heading (no data) 4.13.2.1 GSM-R equipment on board and its version (FRS and SRS) [Character string] From a predefined list Y Y Y Y 4.13.2.2 Number of GSM-R mobile sets in driving cab for data transmission [Number]: 0, 1, 2 or 3 Y Y Y Y 4.13.2.3 Class B or other radio systems installed (system and, if applicable, version) [Character string] From a predefined list (more than one option possible) Y Y Y Y 4.13.2.4 Special conditions implemented on-board to switch over between different radio systems. [Character string] From combination of systems installed on board (‘System XX’/‘System YY’) (more than one option possible) Y Y Y Y 4.14 Compatibility with train detection systems Heading (no data) 4.14.1 Type of train detection systems for which the vehicle has been designed and assessed [Character string] From a predefined list (more than one option possible) Y Y Y Y 4.14.2 Detailed vehicle characteristics related to compatibility with train detection systems Heading (no data) Y Y Y Y 4.14.2.1 Maximum distance between consecutive axles [Number] mm Y Y Y Y 4.14.2.2 Minimum distance between consecutive axles [Number] mm Y Y Y Y 4.14.2.3 Distance between the first and the last axle [Number] mm Y Y Y Y 4.14.2.4 Maximum length of the vehicle nose [Number] mm Y Y Y Y 4.14.2.5 Minimum wheel rim width [Number] mm Y Y Y Y 4.14.2.6 Minimum wheel diameter [Number] mm Y Y Y Y 4.14.2.7 Minimum flange thickness [Number] mm Y Y Y Y 4.14.2.8 Minimum flange height [Number] mm Y Y Y Y 4.14.2.9 Maximum flange height [Number] mm Y Y Y Y 4.14.2.10 Minimum axle load [Number] t Y Y Y Y 4.14.2.11 Metal and inductive components-free space between wheels Open point OP OP OP OP 4.14.2.12 Wheel material is ferromagnetic [Boolean] Y/N Y Y Y Y 4.14.2.13 Maximum sanding output [Number] g per [Number] s Y N N Y 4.14.2.14 Possibility of preventing the use of sanding Y/N Y N N Y 4.14.2.15 Vehicle metal mass Open point OP OP OP OP 4.14.2.16 Maximum impedance between opposite wheels of a wheelset [Number] Ω Y Y Y Y 4.14.2.17 Minimum vehicle impedance (between wheels and pantograph) (only for vehicles equipped for 1 500 V or 3 000 V DC) [Number] Ω for [Number] Hz (more than one line is possible) Y N N Y 4.14.2.18 Electromagnetic interferences caused by return current in the rails Open point OP OP OP OP 4.14.2.19 Electromagnetic emission of the train with respect to compatibility with train detection systems Open point OP OP OP OP Notes: 1. Where a parameter is defined in the applicable TSI, the value indicated for the parameter shall be the one assessed in the verification procedure. 2. Predefined lists shall be maintained and kept updated by the Agency in accordance with the TSIs in force, including the TSIs that may be applied during a transitional period. 3. For parameters indicated as ‘open point’ no data shall be introduced until the ‘open point’ is not closed in the relevant TSI. 4. For parameters indicated as ‘optional’, indication of data shall be subject to the decision of the applicant for the type authorisation. 5. Fields 0.1-0.3 shall be filled in by the Agency.