Certification of propulsion engine power
Article 61
1. The certification of the maximum continuous engine power of a new propulsion engine, a replacement propulsion engine and a propulsion engine that has been technically modified, as referred to in Article 40(1) and (2) of the Control Regulation, shall be provided in accordance with Council Regulation (EEC) No 2930/86 ( 26 ) . 2. A propulsion engine shall be considered to have been technically modified as referred to in paragraph 1 when any of its main components (parts), including but not limited to, injection equipment, valves, turbocharger, pistons, cylinder liners, connecting rods, cylinder heads, have been modified or replaced by new parts with different technical specifications resulting in a modified power rating or when the engine adjustments, such as the injection settings, turbocharger configuration, or the valve timings have been modified. The nature of the technical modification shall be clearly explained in the certification referred to in paragraph 1. 3. The holder of a fishing licence shall inform the competent authorities before a new propulsion engine will be installed or before an existing propulsion engine will be replaced or technically modified. 4. This Article shall apply to fishing vessels subject to a fishing effort regime as from 1 January 2012. For other fishing vessels it shall apply as from 1 January 2013. It shall only apply to fishing vessels which have had new propulsion engines installed, or whose existing propulsion engines have been replaced or technically modified, after the entry into force of this Regulation.