Marking of wood packaging material, wood, or other objects
Article 96
1. The mark applied on wood packaging material, wood or other objects to attest that a treatment has been applied in accordance with Annex 1 to ISPM15 shall comply with the requirements set out in Annex 2 to ISPM15 in all of the following cases: (a) wood packaging material introduced into the Union territory from a third country, as referred to in Article 43; (b) wood packaging material marked within the Union territory, moving out of the Union territory; (c) wood packaging material, wood or other objects moving within the Union territory, if required so by an implementing act adopted pursuant to Article 28, 30, 41 or 54; (d) any other wood packaging material, wood or other object marked within the Union territory. The mark shall only be applied where the wood packaging material, wood or other objects have been subject to one or more of the approved treatments referred to in Annex 1 to ISPM15, without prejudice to Regulations (EC) No 1005/2009 ( 28 ) , (EC) No 1107/2009 ( 29 ) and (EU) No 528/2012 ( 30 ) of the European Parliament and of the Council. For wood packaging material, wood or other objects marked in the Union territory, the mark shall only be applied by a registered operator authorised in accordance with Article 98. Points (a) and (b) of the first subparagraph shall not apply to wood packaging material which is subject to the exemptions provided for in ISPM15. 2. The Commission is empowered to adopt delegated acts in accordance with Article 105 amending the requirements set out in paragraph 1 of this Article in order to adapt them to the development of international standards and in particular to ISPM15.