ANNEX VSupplementary provisions
ANNEX V Annex B to Delegated Regulation (EU) 2015/2446 is corrected as follows: (1) in Title I, Chapter 2, Section 1, the table, the row relating to G4, in the column ‘Legal basis’, the text is replaced by the following: ‘Articles 5(17) and 145 of the Code’; (2) in Title I, Chapter 2, Section 1, the table, the row relating to G5, in the column ‘Legal basis’, the text is replaced by the following: ‘Article 148(5)(b) and (c) of the Code’; (3) in Title I, Chapter 3, Section 1, the table for Group 5, the row relating to data element 5/1, in the column ‘Box No’, the reference ‘S12’ is deleted; (4) in Title I, Chapter 3, Section 1, the table for Group 7, the row relating to data element 7/13, in the column ‘D.E. name’, the text is replaced by the following: ‘Container supplier type code’; (5) in Title II, Data requirements, ‘Group 1 – Message information (including procedure codes)’ in data elements 1/1 ‘Declaration type’, 1/2 ‘Additional Declaration type’, 1/3 ‘Transit Declaration/Proof of customs status type’, 1/4 ‘Forms’, 1/5 ‘Loading lists’, 1/9 ‘Total number of items’, the words ‘All relevant used data requirements table columns:’ are replaced by the words ‘All relevant data requirements table columns used:’; (6) in Title II, Data requirements, ‘Group 3 – Parties’ in data elements 3/2 ‘Exporter identification n o ’, 3/9 ‘Consignee’, 3/10 ‘Consignee identification No’, 3/11 ‘Consignee – Master level transport contract’, 3/12 ‘Consignee identification No – Master level transport contract’, 3/13 ‘Consignee – House level transport contract’, 3/14 ‘Consignee identification No – House level transport contract’, 3/15 ‘Importer’, 3/16 ‘Importer identification No’, 3/18 ‘Declarant identification No’, 3/19 ‘Representative’, 3/20 ‘Representative identification’, 3/21 ‘Representative status code’, 3/22 ‘Holder of the transit procedure’, 3/23 ‘Holder of the transit procedure identification No’, the words ‘All relevant used data requirements table columns:’ are replaced by the words ‘All relevant data requirements table columns used:’; (7) in Title II, Data requirements, Group 3 – Parties, in data element 3/2 ‘Exporter identification n o ’, the words ‘Data Requirements table columns H1 to H4 and I1:’ are replaced by the words: ‘Data requirements table columns H1, H3 and H4:’; (8) in Title II, Data requirements, Group 3 – Parties, in data element 3/17 ‘Declarant’, the second paragraph below the heading ‘Data Requirements table columns H1 to H6 and I1’ is replaced by the following: ‘If the declarant and the importer are the same person, enter the relevant code defined for the D.E. 2/2 Additional information.’; (9) in Title II, Data requirements, Group 3 – Parties, in data element 3/36 ‘Notify party identification No – House level transport contract’, the first paragraph below the heading ‘All relevant data requirements table columns used:’ is replaced by the following: ‘This information takes the form of the notify party EORI number referred to in Article 1(18), whenever this number is available to the declarant.’; (10) in Title II, Data requirements, Group 5 – Dates/Times/Periods/Places/Countries/Regions, in data element 5/1 ‘Estimated date and time of arrival at first place of arrival in the Customs territory of the Union’, the words ‘Data Requirements table columns G1 to G3:’ are replaced by the words ‘Data requirements table columns G1 and G2:’; (11) in Title II, Data requirements, in Group 5 – Dates/Times/Periods/Places/Countries/Regions, data element 5/20 ‘Countries of routing of the consignment codes’ is replaced by the following: ‘ 5/20. Countries of routing of the consignment codes All relevant data requirements table columns used: Identification in a chronological order of the countries through which the goods are routed between the country of original departure and final destination as stipulated in the lowest House Bill of Lading, lowest House Air waybill or road/rail transport document. This comprises also the countries of original departure and of final destination of the goods.’; (12) in Title II, Data requirements, ‘Group 6 – Goods identification’ in data elements 6/15 ‘Commodity code – TARIC code’, 6/18 ‘Total packages’, 6/19 ‘Type of goods’, the words ‘All relevant used data requirements table columns:’ are replaced by the words ‘All relevant data requirements table columns used:’ (13) in Title II, Data requirements, in Group 6 – Goods identification, data elements 6/16 ‘Commodity code – TARIC additional codes’ and 6/17 ‘Commodity code – National additional codes’ are replaced by the following: ‘ 6/16. Commodity code – TARIC additional code(s) All relevant data requirements table columns used: Enter the TARIC additional code(s) corresponding to the item in question. 6/17. Commodity code – National additional code(s) All relevant data requirements table columns used: Enter the national additional code(s) corresponding to the item in question.’; (14) in Title II, Data requirements, Group 7 – Transport information (modes, means and equipment), in data element 7/3 ‘Conveyance reference number’, the notes are replaced by the following: ‘ 7/3. Conveyance reference number All relevant data requirements table columns used: Identification of the journey of the means of transport, for example voyage number, IATA flight number, or trip number, if applicable. For maritime and air transport, in situations where the operator of the vessel or the aircraft transports goods under a vessel-sharing, code-sharing or similar contracting agreement with partners, the partners' voyage or flight numbers shall be used.’; (15) in Title II, Data requirements, in Group 7 – Transport information (modes, means and equipment), data element 7/7 ‘Identity of means of transport at departure’ is corrected as follows: (a) the words ‘Data Requirements table columns B1 and B2:’ are replaced by the words ‘Data requirements table columns B1, B2 and B3:’; (b) the first paragraph below the heading ‘Data Requirements table columns D1 to D3’ is replaced by the following: ‘This information shall take the form of the IMO ship identification number or the unique European Vessel Identification Number (ENI code) for transport by sea or inland waterways. For other modes of transport, the method of identification shall be identical to that provided for data requirements table columns B1, B2 and B3.’; (16) in Title II, Data requirements, Group 7 – Transport information (modes, means and equipment), in data element 7/9 ‘Identity of means of transport on arrival’, the words ‘Data Requirements table columns G4 and G5:’ are replaced by the words: ‘Data requirements table column G4:’; (17) in Title II, Data requirements, Group 7 – Transport information (modes, means and equipment), in the heading of data element 7/11 ‘Container size and type identification’, the word ‘identification’ is deleted; (18) in Title II, Data requirements, Group 7 – Transport information (modes, means and equipment), in data element 7/14 ‘Identity of active means of transport crossing the border’, the words ‘Data Requirements table columns E2, F1a to F1c, F2a, F2b, F4a, F4b and F5:’ are replaced by the words: ‘Data requirements table columns E2, F1a to F1c, F4a, F4b and F5:’; (19) in Title II, Data requirements, Group 7 – Transport information (modes, means and equipment), data element 7/15 ‘Nationality of active means of transport crossing the border’, the words ‘Data Requirements table columns F1a, F1b, F2a, F2b, F4a, F4b and F5’ are replaced by the words ‘Data requirements table columns F1a, F1b, F4a, F4b and F5’.