My bookmarksSign up free

Commission Delegated Regulation (EU) 2019/331 ANNEX III

Commission Delegated Regulation (EU) 2019/331 ANNEX III

ANNEX IIISupplementary provisions

ANNEX III Historical activity level for specific benchmarks referred to in Articles 15(8) and 17(f) 1. The product-related historical activity level for the baseline period for products to which the refinery product benchmark as referred to in Annex I applies on the basis of the different CWT functions, their definitions, the basis for throughput as well as the CWT factors as listed in Annex II, shall be determined according to the following formula: whereby: HAL CWT : historical activity level expressed as CWT TP i,k : throughput of the CWT function i in year k of the baseline period CWT i : CWT factor of the CWT function i TP AD,k : throughput of the CWT function ‘Atmospheric Crude Distillation’ in year k of the baseline period 2. The product-related historical activity level for the baseline period for products to which the lime product benchmark as referred to in Annex I applies shall be determined according to the following formula: whereby: HAL lime,standard : historical activity level for lime production expressed in tons of standard pure lime m CaO,k : content of free CaO in the produced lime in year k of the baseline period expressed as mass-% In case no data on the content of free CaO is available, a conservative estimate not higher than 85 % shall be applied. m MgO,k : content of free MgO in the produced lime in year k of the baseline period expressed as mass-% In case no data on the content of free MgO is available, a conservative estimate not higher than 0,5 % shall be applied. HAL lime,uncorrected,k : uncorrected historical activity level for lime production in year k of the baseline period expressed in tonnes of lime 3. The product-related historical activity level for the baseline period for products to which the dolime product benchmark as referred to in Annex I applies shall be determined according to the following formula: whereby: HAL dolime,standard : historical activity level for dolime production expressed in tonnes of standard pure dolime m CaO,k : content of free CaO in the produced dolime in year k of the baseline period expressed as mass-% In case no data on the content of free CaO is available, a conservative estimate not higher than 52 % shall be applied. m MgO,k : content of free MgO in the produced dolime in year k of the baseline period expressed as mass-% In case no data on the content of free MgO is available, a conservative estimate not higher than 33 % shall be applied. HAL dolime,uncorrected,k : uncorrected historical activity level for dolime production in year k of the baseline period expressed in tonnes of lime 4. The product-related historical activity level for the baseline period for products to which the steam cracking product benchmark as referred to in Annex I applies shall be determined according to the following formula: whereby: HAL HVC,net : historical activity level for high value chemicals net of high value chemicals produced from supplemental feed expressed in tonnes of HVC HAL HVC,total,k : historical activity level for total high value chemicals production in year k of the baseline period expressed in tonnes of HVC HSF H,k : historical supplemental feed of hydrogen in year k of the baseline period expressed in tonnes of hydrogen HSF E,k : historical supplemental feed of ethylene in year k of the baseline period expressed in tonnes of ethylene HSF O,k : historical supplemental feed of other high value chemicals than hydrogen and ethylene in year k of the baseline period expressed in tonnes of HVC 5. The product-related historical activity level for the baseline period for products to which the aromatics product benchmark as referred to in Annex I applies on the basis of the different CWT functions, their definitions, the basis for throughput as well as the CWT factors as listed in Annex II shall be determined according to the following formula: whereby: HAL CWT : historical activity level expressed as CWT TP i,k : throughput of the CWT function i in year k of the baseline period CWT i : CWT factor of the CWT function i 6. The product-related historical activity level for the baseline period for products to which the hydrogen product benchmark as referred to in Annex I applies shall be determined according to the following formula: whereby: HAL H2 : historical activity level for hydrogen production referred to 100 % hydrogen VF H2,k : historical production volume fraction of pure hydrogen in the total volume of hydrogen and carbon monoxide in year k of the baseline period HAL H2 + CO,k : historical activity level for hydrogen production referred to historical hydrogen content expressed as norm cubic meters per year referring to 0 °C and 101,325 kPa in year k of the baseline period 7. The product-related historical activity level for the baseline period for products to which the synthesis gas (syngas) product benchmark as referred to in Annex I applies shall be determined according to the following formula: whereby: HAL syngas : historical activity level for synthesis gas production referred to 47 % hydrogen VF H2,k : historical production volume fraction of pure hydrogen in the total volume of hydrogen and carbon monoxide in year k of the baseline period HAL H2 + CO,k : historical activity level for synthesis gas production referred to historical hydrogen content expressed as norm cubic meters per year referring to 0 °C and 101,325 kPa in year k of the baseline period 8. The product-related historical activity level for the baseline period for products to which the ethylene oxide/ethylene glycols product benchmark as referred to in Annex I applies shall be determined according to the following formula: whereby: HAL EO/EG : historical activity level for ethylene oxide/ethylene glycols production expressed in tonnes of ethylene oxide equivalents HAL i,k : historical activity level for the production of the ethylene oxide or glycol i in year k of the baseline period expressed in tonnes CF EOE,i conversion factor for the ethylene oxide or glycol i relative to ethylene oxide Following conversion factors shall be applied:   Ethylene oxide: 1,000   Monoethylene glycol: 0,710   Diethylene glycol: 0,830   Triethylene glycol: 0,880

Read the full instrument →

Other provisions in Commission Delegated Regulation (EU) 2019/331

Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗ · Data as of 2026-07-04

CitationANNEX III of Commission Delegated Regulation (EU) 2019/331 (LawPlayer, data as of 2026-07-04)

© European Union, https://eur-lex.europa.eu, 1998-2026. Reuse authorised under Commission Decision 2011/833/EU, provided the source is acknowledged.

What to look at next