Technical documentation
ANNEX VISupplementary provisions
ANNEX VI Technical documentation 1. The technical documentation referred to in point 1(d) of Article 3 shall include: (a) the name and address of the supplier; (b) supplier’s model identifier; (c) the model identifier of all equivalent models already placed on the market; (d) identification and signature of the person empowered to bind the supplier; (e) the declared and measured values for the following technical parameters: (1) useful luminous flux (Φ use ) in lm; (2) colour rendering index (CRI); (3) on-mode power (P on ) in W; (4) beam angle in degrees for directional light sources (DLS); (5) correlated colour temperature (CCT) in K for FL and HID light sources; (6) 'standby power (P sb ) in W, including when it is zero; (7) networked standby power (P net ) in W for connected light sources (CLS); (8) displacement factor (cos φ1) for LED and OLED mains light sources; (9) colour consistency in MacAdam ellipse steps for LED and OLED light sources; (10) luminance-HLLS in cd/mm 2 (only for HLLS) (11) flicker metric (PstLM) for LED and OLED light sources; (12) stroboscopic effect metric (SVM) for LED and OLED light sources; (13) excitation purity, only for CTLS, for the following colours and dominant wavelength within the given range: Colour Dominant wave-length range Blue 440 nm — 490 nm Green 520 nm — 570 nm Red 610 nm — 670 nm (f) the calculations performed with the parameters, including the determination of the energy efficiency class; (g) references to the harmonised standards applied or other standards used; (h) testing conditions if not described sufficiently in point (g); (i) the reference control settings, and instructions on how they can be implemented, where applicable; (j) instructions on how to remove lighting control parts and/or non-lighting parts, if any, or how to switch them off or minimise their power consumption during light source testing; (k) specific precautions that shall be taken when the model is assembled, installed, maintained or tested.