Product information sheet
ANNEX VSupplementary provisions
ANNEX V Product information sheet Pursuant to point 1(b) of Article 3, the supplier shall enter into the product database the information as set out in Table 10. Table 10 Product information sheet Supplier’s name or trademark: Supplier’s address ( 2 ) : Model identifier: Use: Display and sale Type of refrigerating appliance with a direct sales function: [Beverage coolers/Ice-cream freezers/Gelato-scooping cabinet/supermarket cabinet/refrigerated vending machines] Cabinet family code, according to the harmonised standards or other reliable, accurate and reproducible methods in accordance with Annex IV. For example: [HC1/…/HC8], [VC1/…/VC4] Product specific parameters (Beverage coolers: fill in point 1, ice-cream freezers: fill in point 2, Gelato-scooping cabinet: fill in point 3, supermarket cabinet: fill in point 4, refrigerated vending machines: fill in point 5. If the refrigerating appliance with a direct sales function contains compartments working at different temperatures, or a compartment that can be set to different temperatures, the lines shall be repeated for each compartment or temperature setting): 1. Beverage coolers: Gross volume (dm 3 or L) Ambient conditions for which the appliance is suitable (according to Table 6) Warmest temperature (°C) Relative humdity (%) x x x 2. Ice-cream freezers with [transparent lid/non-transparent lid]: Net volume (dm 3 or L) Ambient conditions for which the appliance is suitable (according to Table 8) Temperature range (°C) Relative humidity range (%) minimum maximum minimum maximum x x x x x 3. Gelato-scooping cabinet Total display area (m 2 ) Temperature class (according to Table 4(b)) x,xx [G1/G2/G3/L1/L2/L3/S] 4. [Integral/Remote] [horizontal/vertical (other than semi-vertical)/semi-vertical/combined] supermarket cabinet, roll-in: [yes/no]: Total display area (m 2 ) Temperature class (according to Table 4(a)) x,xx [refrigerator: [M2/H1/H2/M1]/freezer: [L1/L2/L3]] 5. Refrigerated vending machines, [refrigerated closed fronted for cans and bottles where the products are held in stacks/refrigerated glass fronted for [can and bottle, confectionery & snack/entirely for perishable foodstuffs]/multi-temperature for [fill in the type of foodstuffs it is intended for]/combination machines consisting of different categories of machine in the same housing and powered by one chiller for [fill in the type of foodstuffs it is intended for]]: Volume (dm 3 or L) Temperature class (according to Table 4(c)) x category [1/2/3/4/6] General product parameters: Parameter Value Parameter Value Annual energy consumption (kWh/a) ( 4 ) x,xx Recommended temperature(s) for optimised food storage (°C) (These settings shall not contradict the temperature conditions set out in Annex IV, Table 4, 5 or 6, as applicable) x EEI x,x Energy efficiency class [A/B/C/D/E/F/G] ( 3 ) Light source parameters ( 1 ) ( 2 ) : Type of light source [type] Energy efficiency class [A/B/C/D/E/F/G] ( 3 ) Minimum duration of the guarantee offered by the supplier ( 2 ) : Additional information: The weblink to the supplier’s website, where the information in point 3 of Annex II of Commission Regulation (EU) 2019/2024 ( 5 ) ( 2 ) is found: ( 1 ) as determined in accordance with Commission Delegated Regulation (EU) 2019/2015 ( 1 ) . ( 1 ) Commission Delegated Regulation (EU) 2019/2015 of 11 March 2019 supplementing Regulation (EU) 2017/1369 of the European Parliament and of the Council with regard to energy labelling of light sources and repealing Commission Delegated Regulation (EU) No 874/2012 (see page 68 of this Official Journal) ( 2 ) changes to these items shall not be considered relevant for the purposes of paragraph 4 of Article 4 of Regulation (EU) 2017/1369. ( 3 ) if the product database automatically generates the definitive content of this cell the supplier shall not enter these data. ( 4 ) if the refrigerating appliance with a direct sales function has different compartments working at different temperatures, the annual energy consumption of the integrated unit shall be provided. If separate refrigeration systems provide cooling for separate compartments of the same unit, the energy consumption associated with each sub-system shall also be provided where possible. ( 5 ) Commission Regulation (EU) 2019/2024 of 11 March 2019 laying down ecodesign requirements for refrigerating appliances with a direct sales function pursuant to Directive 2009/125/EC of the European Parliament and of the Council (see page 313 of this Official Journal).