Risk management
Article 5
1. For the purpose of producing, supplying and using reclaimed water, the competent authority shall ensure that a water reuse risk management plan is established. One water reuse risk management plan may cover one or more water reuse systems. 2. The water reuse risk management plan shall be prepared by the reclamation facility operator, other responsible parties and end-users, as appropriate. The responsible parties preparing the water reuse risk management plan shall consult all other relevant responsible parties and end-users, as appropriate. 3. The water reuse risk management plan shall be based on all the key elements of risk management set out in Annex II. It shall identify the risk management responsibilities of the reclamation facility operator and other responsible parties. 4. The water reuse risk management plan shall in particular: (a) set out any necessary requirements for the reclamation facility operator, in addition to those specified in Annex I, in accordance with point (B) of Annex II to further mitigate any risks before the point of compliance; (b) identify hazards, risks and appropriate preventive and/or possible corrective measures in accordance with point (C) of Annex II; (c) identify additional barriers in the water reuse system and set out any additional requirements, which are necessary after the point of compliance to ensure that the water reuse system is safe, including conditions related to distribution, storage and use where relevant, and identify the parties responsible for meeting those requirements. 5. The Commission is empowered to adopt delegated acts in accordance with Article 13 amending this Regulation in order to adapt to technical and scientific progress the key elements of risk management set out in Annex II. The Commission is also empowered to adopt delegated acts in accordance with Article 13 supplementing this Regulation in order to lay down technical specifications of the key elements of risk management set out in Annex II.