Amendments to Regulation (EU) 2019/1781
Article 2
Regulation (EU) 2019/1781 is amended as follows: (1) Article 2 is amended as follows: (a) in point (2), point (m) is replaced by the following: ‘(m) motors placed on the market before 1 July 2029 as substitutes for identical motors integrated in products placed on the market before 1 July 2021 for motors referred to in Annex I.1 (a), and before 1 July 2023 for motors referred to in Annex I.1 (b), and specifically marketed as such;’; (b) in point (3), point (e) is inserted: ‘(e) VSDs consisting of a single cabinet, comprising VSDs which are all in conformity with this Regulation.’; (2) Article 3 is amended as follows: (a) point (2) is replaced by the following: ‘(2) “variable speed drive” (“VSD”) means an electronic power converter that continuously adapts the electrical power supplied to a single motor to control the motor’s mechanical power output according to the torque-speed characteristic of the load driven by the motor, by adjusting the power supply to a variable frequency and voltage supplied to the motor. It includes all protection devices and auxiliaries which are integrated in the VSD.’; (b) point (23) is added: ‘(23) “declared values” means the values provided by the manufacturer, importer or authorised representative for the stated, calculated or measured technical parameters in accordance with Article 5, for the verification of compliance by the Member State authorities.’; (3) Article 5 is amended as follows: (a) paragraph 2 is replaced by the following: ‘For the purposes of the conformity assessment pursuant to Article 8 of Directive 2009/125/EC, the technical documentation of motors shall contain a copy of the product information provided in accordance with point 2 of Annex I to this Regulation, and the details and results of calculations set out in Annex II to this Regulation, and where applicable Annex I.1’; (b) paragraph 3 is replaced by the following: ‘For the purposes of the conformity assessment pursuant to Article 8 of Directive 2009/125/EC, the technical documentation of VSDs shall contain a copy of the product information provided in accordance with point 4 of Annex I to this Regulation, and the details and results of calculations set out in Annex II to this Regulation, and where applicable Annex I.3’; (4) Annexes I, II and III are amended as set out in Annex II to this Regulation.