ANNEX IIISupplementary provisions
ANNEX III Annex IV to Regulation (EU) 2020/683 is amended as follows: (1) in point 2.2., point (c) is replaced by the following: ‘(c) the number of the Commission Regulation adopted pursuant to Regulation (EU) 2019/2144 and laying down the applicable requirements. For the purposes of point (c), where a (base) Regulation contains separate annexes with requirements and technical prescriptions to be applied for different subject matters covering vehicle systems, components and separate technical units, the reference in Section 2 shall be followed by a roman numeral denoting the Annex number to that Regulation.’; (2) in point 3.1., point (c) is replaced by the following: ‘(c) in accordance with Annex XI to Implementing Regulation (EU) 2021/535( 14 ): e2*2021/535/XI*2021/535*00003*00’ (3) in point 3.1., point (d) is replaced by the following: ‘(d) in accordance with Implementing Regulation (EU) 2021/646( 122 ): e2*2021/646*2021/646*00003*00’ (4) in point 4, the second paragraph is replaced by the following: ‘However, this Annex applies to EU type-approvals granted in accordance with Regulation (EU) 2019/2144 on the basis of requirements laid down in the UN Regulations listed in Annex II to Regulation (EU) 2018/858, in which case the following numbering system shall apply:’; (5) point 4.2. is replaced by the following: ‘4.2. Section 2: The number of Regulation (EU) 2019/2144 (i.e. ‘2019/2144’)’; (6) in the example in point 4.6.1, the type-approval certificate number. is replaced by the following: ‘e1*2019/2144*13-HR00/16*00001*00’; (7) in the example in point 4.6.2., the type-approval certificate number is replaced by the following: ‘e25*2019/2144*46R04/01*00123*05’.