ANNEX IISupplementary provisions
ANNEX II PART ONE B-TYPE STANDARDS 1. Explanatory note. B-type standards deal with specific aspects of machinery safety or specific types of safeguard that can be used across a wide range of categories of machinery. Application of the specifications of B-type standards confers a presumption of conformity with the essential health and safety requirements of the Machinery Directive that they cover when a C-type standard or the manufacturer’s risk assessment shows that a technical solution specified by the B-type standard is adequate for the particular category or model of machinery concerned. Application of B-type standards that give specifications for safety components that are independently placed on the market confers a presumption of conformity for the safety components concerned and for the essential health and safety requirements covered by the standards. 2. List of references of standards. No Reference of standard Date of withdrawal 1. EN ISO 11202:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010) 11 October 2023 2. EN 15967:2011 Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours 2 February 2025 3. EN 62061:2005 Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems (IEC 62061:2005) EN 62061:2005/AC:2010 EN 62061:2005/A1:2013 EN 62061:2005/A2:2015 11 October 2023 PART TWO C-TYPE STANDARDS 1. Explanatory note. C-type standards provide specifications for a given category of machinery. The different types of machinery belonging to the category covered by a C-type standard have a similar intended use and present similar hazards. C-type standards may refer to A or B-type standards, indicating which of the specifications of the A or B-type standard are applicable to the category of machinery concerned. When, for a given aspect of machinery safety, a C-type standard deviates from the specifications of an A or B-type standard, the specifications of the C-type standard take precedence over the specifications of the A or B-type standard. Application of the specifications of a C-type standard on the basis of the manufacturer’s risk assessment confers a presumption of conformity with the essential health and safety requirements of the Machinery Directive covered by the standard. Certain C-type standards are organised as a series of several parts, Part 1 of the standard giving general specifications applicable to a family of machinery and other parts of the standard giving specifications for specific categories of machinery belonging to the family, supplementing or modifying the general specifications of Part 1. For C-type standards organised in this way, the presumption of conformity with the essential health and safety requirements of the Machinery Directive is conferred by application of the general Part 1 of the standard together with the relevant specific part of the standard. 2. List of references of standards. No Reference of standard Date of withdrawal 1. EN 280:2013+A1:2015 Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests 2 February 2025 2. EN 303-5:2012 Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking 11 October 2023 3. EN 415-3:1999+A1:2009 Safety of packaging machines - Part 3: Form, fill and seal machines 2 February 2025 4. EN 474-2:2006+A1:2008 Earth-moving machinery - Safety - Part 2: Requirements for tractor-dozers 2 February 2025 5. EN 474-3:2006+A1:2009 Earth-moving machinery - Safety - Part 3: Requirements for loaders 2 February 2025 6. EN 474-4:2006+A2:2012 Earth-moving machinery - Safety - Part 4: Requirements for backhoe loaders 2 February 2025 7. EN 474-5:2006+A3:2013 Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators 2 February 2025 8. EN 474-6:2006+A1:2009 Earth-moving machinery - Safety - Part 6: Requirements for dumpers 2 February 2025 9. EN 474-7:2006+A1:2009 Earth-moving machinery - Safety - Part 7: Requirements for scrapers 2 February 2025 10. EN 474-8:2006+A1:2009 Earth-moving machinery - Safety - Part 8: Requirements for graders 2 February 2025 11. EN 474-9:2006+A1:2009 Earth-moving machinery - Safety - Part 9: Requirements for pipelayers 2 February 2025 12. EN 474-10:2006+A1:2009 Earth-moving machinery - Safety - Part 10: Requirements for trenchers 2 February 2025 13. EN 474-11:2006+A1:2008 Earth-moving machinery - Safety - Part 11: Requirements for earth and landfill compactors 2 February 2025 14. EN 474-12:2006+A1:2008 Earth-moving machinery - Safety - Part 12: Requirements for cable excavators 2 February 2025 15. EN 500-4:2011 Mobile road construction machinery - Safety - Part 4: Specific requirements for compaction machines 2 February 2025 16. EN 528:2008 Rail dependent storage and retrieval equipment - Safety requirements 2 February 2024 17. EN 619:2002+A1:2010 Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads 2 February 2025 18. EN 620:2002+A1:2010 Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials 2 February 2025 19. EN 703:2004+A1:2009 Agricultural machinery - Silage loading, mixing and/or chopping and distributing machines - Safety 2 February 2025 20. EN 710:1997+A1:2010 Safety requirements for foundry moulding and coremaking machinery and plant associated equipment EN 710:1997+A1:2010/AC:2012 2 February 2025 21. EN 746-3:1997+A1:2009 Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and use of atmosphere gases 2 February 2025 22. EN 1034-4:2005+A1:2009 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4: Pulpers and their loading facilities 2 February 2025 23. EN 1501-1:2011+A1:2015 Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles 11 October 2023 24. EN 1501-2:2005+A1:2009 Refuse collection vehicles and associated lifting devices - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles 11 October 2023 25. EN 1501-3:2008 Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles 11 October 2023 26. EN 1501-5:2011 Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles 11 October 2023 27. EN 1755:2000+A2:2013 Safety of industrial trucks - Operation in potentially explosive atmospheres - Use in flammable gas, vapour, mist and dust 2 February 2024 28. EN 1756-1:2001+A1:2008 Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 1: Tail lifts for goods 11 October 2023 29. EN 1807-1:2013 Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws 2 February 2025 30. EN 1829-1:2010 High pressure water jet machines - Safety requirements - Part 1: Machines 11 October 2023 31. EN ISO 3691-6:2015 Industrial trucks - Safety requirements and verification - Part 6: Burden and personnel carriers (ISO 3691-6:2013) EN ISO 3691-6:2015/AC:2016 2 February 2025 32. EN ISO 4254-1:2015 Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2013) 2 February 2025 33. EN ISO 4254-6:2009 Agricultural machinery - Safety - Part 6: Sprayers and liquid fertilizer distributors (ISO 4254-6:2009) EN ISO 4254-6:2009/AC:2010 2 February 2025 34. EN ISO 11680-1:2011 Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Machines fitted with an integral combustion engine (ISO 11680-1:2011) 2 February 2025 35. EN ISO 11680-2:2011 Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 2: Machines for use with back-pack power source (ISO 11680-2:2011) 2 February 2025 36. EN ISO 11681-1:2011 Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chain-saws for forest service (ISO 11681-1:2011) 2 February 2025 37. EN ISO 11681-2:2011 Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:2011) EN ISO 11681-2:2011/A1:2017 2 February 2025 38. EN ISO 11806-1:2011 Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 1: Machines fitted with an integral combustion engine (ISO 11806-1:2011) 2 February 2025 39. EN ISO 11806-2:2011 Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 2: Machines for use with back-pack power unit (ISO 11806-2:2011) 2 February 2025 40. EN ISO 11850:2011 Machinery for forestry - General safety requirements (ISO 11850:2011) EN ISO 11850:2011/A1:2016 2 February 2025 41. EN 12012-4:2006+A1:2008 Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators 2 February 2024 42. EN 12158-1:2000+A1:2010 Builders’ hoists for goods - Part 1: Hoists with accessible platforms 2 February 2025 43. EN 12312-5:2005+A1:2009 Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment 11 October 2023 44. EN 12331:2003+A2:2010 Food processing machinery - Mincing machines - Safety and hygiene requirements 2 February 2024 45. EN 12355:2003+A1:2010 Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety and hygiene requirements 2 February 2025 46. EN 12418:2000+A1:2009 Masonry and stone cutting-off machines for job site - Safety 2 February 2025 47. EN 12750:2013 Safety of woodworking machines - Four sided moulding machines 2 February 2025 48. EN 13001-2:2014 Crane safety - General design - Part 2: Load actions 11 October 2023 49. EN 13001-3-5:2016 Cranes - General design - Part 3-5: Limit states and proof of competence of forged hooks 2 February 2025 50. EN 13019:2001+A1:2008 Machines for road surface cleaning - Safety requirements 2 February 2025 51. EN 13021:2003+A1:2008 Winter service machines - Safety requirements 2 February 2025 52. EN 13118:2000+A1:2009 Agricultural machinery - Potato harvesting equipment - Safety 2 February 2025 53. EN 13140:2000+A1:2009 Agricultural machinery - Sugar beet and fodder beet harvesting equipment - Safety 2 February 2025 54. EN 13524:2003+A2:2014 Highway maintenance machines - Safety requirements 2 February 2025 55. EN 13617-1:2012 Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units 2 February 2025 56. EN 13732:2013 Food processing machinery - Bulk milk coolers on farms - Requirements for performance, safety and hygiene 2 February 2025 57. EN 13862:2001+A1:2009 Floor cutting-off machines - Safety 2 February 2025 58. EN 13870:2015 Food processing machinery - Portion cutting machines - Safety and hygiene requirements 2 February 2025 59. EN 13885:2005+A1:2010 Food processing machinery - Clipping machines - Safety and hygiene requirements 2 February 2025 60. EN 15163:2008 Machines and installations for the exploitation and processing of natural stone - Safety - Requirements for diamond wire saws 2 February 2024 61. EN 16228-1:2014 Drilling and foundation equipment - Safety - Part 1: Common requirements 2 February 2025 62. EN 16228-2:2014 Drilling and foundation equipment - Safety - Part 2: Mobile drill rigs for civil and geotechnical engineering, quarrying and mining 2 February 2025 63. EN 16228-3:2014 Drilling and foundation equipment - Safety - Part 3: Horizontal directional drilling equipment (HDD) 2 February 2025 64. EN 16228-4:2014 Drilling and foundation equipment - Safety - Part 4: Foundation equipment 2 February 2025 65. EN 16228-5:2014 Drilling and foundation equipment - Safety - Part 5: Diaphragm walling equipment 2 February 2025 66. EN 16228-6:2014 Drilling and foundation equipment - Safety - Part 6: Jetting, grouting and injection equipment 2 February 2025 67. EN 16228-7:2014 Drilling and foundation equipment - Safety - Part 7: Interchangeable auxiliary equipment 2 February 2025 68. EN ISO 18217:2015 Safety of woodworking machines - Edge-banding machines fed by chain(s) (ISO 18217:2015) 2 February 2025 69. EN ISO 19085-1:2017 Woodworking machines - Safety - Part 1: Common requirements (ISO 19085-1:2017) 11 October 2023 70. EN ISO 19085-2:2017 Woodworking machines - Safety - Part 2: Horizontal beam panel circular sawing machines (ISO 19085-2:2017, Corrected version 2017-11-01) 2 February 2025 71. EN ISO 22867:2011 Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2011) 2 February 2025 72. EN ISO 22868:2011 Forestry and gardening machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy) (ISO 22868:2011) 11 October 2023 73. EN ISO 28881:2013 Machine tools - Safety - Electro-discharge machines (ISO 28881:2013) EN ISO 28881:2013/AC:2013 2 February 2025 74. EN ISO 28927-1:2009 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 1: Angle and vertical grinders (ISO 28927-1:2009) EN ISO 28927-1:2009/A1:2017 2 February 2025 75. EN 60335-2-77:2010 Safety of household and similar appliances - Part 2-77: Particular requirements for pedestrian-controlled walk-behind electrically powered lawn mowers (IEC 60335-2-77:2002, modified) 2 February 2025 76. EN 60335-2-89:2010 Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor (IEC 60335-2-89:2010) EN 60335-2-89:2010/A1:2016 EN 60335-2-89:2010/A2:2017 2 February 2025 77. EN 60745-2-3:2011 Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders (IEC 60745-2-3:2006, modified + A1:2010, modified) EN 60745-2-3:2011/A2:2013 EN 60745-2-3:2011/A11:2014 EN 60745-2-3:2011/A12:2014 EN 60745-2-3:2011/A13:2015 2 February 2025 78. EN 60745-2-15:2009 Hand-held motor-operated electric tools - Safety - Part 2-15: Particular requirements for hedge trimmers (IEC 60745-2-15:2006, modified) EN 60745-2-15:2009/A1:2010 2 February 2025 79. EN 62841-1:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 1: General requirements (IEC 62841-1:2014, modified) EN 62841-1:2015/AC:2015 2 February 2025