FORMAT FOR THE REPORTING OF DATA
ANNEX IISupplementary provisions
ANNEX II FORMAT FOR THE REPORTING OF DATA 1. Format for reporting of data calculated based on the methodology set out in Article 3 Table 1 Weight of plastic used in beverage bottles and of PET bottles placed on the market calculated in accordance with Article 3 (in tonnes) PET bottles (C1) beverage bottles other than PET bottles (C2) beverage bottles (C1+C2) COUNTRY: REFERENCE YEAR: Weight of plastic used in bottles calculated in accordance with Article 3(1) Weight of plastic used inbottles manufactured and placed on the market in the Member State (1) Adjustment of the weight of plastic used in bottles calculated in accordance with Article 3(2) Weight of plastic used in bottles moved from other Member States and placed on the market (2) Weight of plastic used in bottles that have been imported and placed on the market (3) Weight of plastic used inbottles moved to other Member States after having been placed on the market in the Member State (4) Weight of plastic used inbottles that have been exported after having been placed on the market in the Member State (5) Weight of plastic used in bottles placed on the market adjusted (6) Notes: Dark shaded boxes: Reporting is voluntary (1) Calculated in accordance with Article 3(1). W_MS (2) Calculated in accordance with Article 3(2). W_in from other MS (3) Calculated in accordance with Article 3(2). W_imported (4) Calculated in accordance with Article 3(2). W_out to other MS (5) Calculated in accordance with Article 3(2). W_exported (6) Calculated in accordance with Article 3(2). W To demonstrate compliance with the targets in Article 6(5), point (a), of Directive (EU) 2019/904 and to fulfil the reporting requirements laid down in Article 13(1), point (e), of Directive (EU) 2019/904, column 1 (C1) must be filled in. To demonstrate compliance with the targets in Article 6(5), point (b), of Directive (EU) 2019/904 and to fulfil the reporting requirements laid down in Article 13(1), point (e), of Directive (EU) 2019/904, either columns 1 (C1) and 2 (C2), or columns 1 (C1) and 3 (C1 + C2) must be filled in. The remaining column may be filled in on a voluntary basis. 2. Format for reporting of data calculated based on the methodology set out in Article 4 Table 2 Weight of recycled plastic used in beverage bottles and PET bottles placed on the market calculated in accordance with Article 4 (in tonnes) and proportion of recycled plastic content (in percent) PET bottles (C1) beverage bottles other than PET bottles (C2) beverage bottles (C1+C2) COUNTRY: REFERENCE YEAR: Weight of recycled plastic used in bottles calculated in accordance with Article 4(1) Weight of recycled plastic used in bottles manufactured and placed on the market in the Member State (1) Adjustment of the weight of recycled plastic used in bottles calculated in accordance with Article 4(2) Weight of recycled plastic used in bottles moved from other Member States and placed on the market (2) Weight of recycled plastic used in bottles that have been imported and placed on the market (3) Weight of recycled plastic used in bottles moved to other Member States after having been placed on the market in the Member State (4) Weight of recycled plastic used in bottles that have been exported after having been placed on the market in the Member State (5) Weight of recycled plastic used in bottles placed on the market adjusted (6) Proportion of recycled plastic content in bottles, expressed in percent (7) Notes: Dark shaded boxes: Reporting is voluntary (1) Calculated in accordance with Article 4(1). R_MS (2) Calculated in accordance with Article 4(2). R_in from other MS (3) Calculated in accordance with Article 4(2). R_imported (4) Calculated in accordance with Article 4(2). R_out to other MS (5) Calculated in accordance with Article 4(2). R_exported (6) Calculated in accordance with Article 4(2). R (7) Calculated in accordance with Article 2. RC To demonstrate compliance with the targets in Article 6(5), point (a), of Directive (EU) 2019/904 and to fulfil the reporting requirements laid down in Article 13(1), point (e), of Directive (EU) 2019/904, column 1 (C1) must be filled in. To demonstrate compliance with the targets in Article 6(5),point (b), of Directive (EU) 2019/904 and to fulfil the reporting requirements laid down in Article 13(1), point (e), of Directive (EU) 2019/904, either columns 1 (C1) and 2 (C2), or columns 1 (C1) and 3 (C1+C2) must be filled in. The remaining column may be filled in on a voluntary basis.