ANNEX IISupplementary provisions
ANNEX II Part II of Annex IV to Regulation (EU) 2019/1009 is amended as follows: (1) in the section ‘MODULE A – INTERNAL PRODUCTION CONTROL’, point 2.2. is amended as follows: (a) point (c) is replaced by the following: ‘(c) the EU declarations of conformity for the component EU fertilising products of the fertilising product blend and a specimen of their physical label or leaflet in accordance with Article 11a and, if the information is provided only on a digital label in accordance with that Article, a specimen of the data carrier of the component EU fertilising products,’; (b) point (e) is replaced by the following: ‘(e) a specimen of the physical label or the leaflet referred to in Article 11a providing the information required in accordance with Annex III and, if the information is provided only on a digital label in accordance with that Article, a specimen of the data carrier,’; (2) in the section ‘MODULE A1 – INTERNAL PRODUCTION CONTROL PLUS SUPERVISED PRODUCT TESTING’, point 2.2. is amended as follows: (a) point (c) is replaced by the following: ‘(c) the EU declarations of conformity for the component EU fertilising products of the fertilising product blend and a specimen of their physical label or leaflet in accordance with Article 11a and, if the information is provided only on a digital label in accordance with that Article, a specimen of the data carrier of the component EU fertilising products,’; (b) point (e) is replaced by the following: ‘(e) a specimen of the physical label or the leaflet referred to in Article 11a providing the information required in accordance with Annex III and, if the information is provided only on a digital label in accordance with that Article, a specimen of the data carrier,’; (3) in the section ‘MODULE B – EU-TYPE EXAMINATION’, point 2.2 is amended as follows: (a) point (c) is replaced by the following: ‘(c) the EU declarations of conformity for the component EU fertilising products of the fertilising product blend and a specimen of their physical label or leaflet in accordance with Article 11a and, if the information is provided only on a digital label in accordance with that Article, a specimen of the data carrier of the component EU fertilising products,’; (b) point (e) is replaced by the following: ‘(e) a specimen of the physical label or the leaflet referred to in Article 11a providing the information required in accordance with Annex III and, if the information is provided only on a digital label in accordance with that Article, a specimen of the data carrier,’; (4) in the section ‘MODULE D1 – QUALITY ASSURANCE OF THE PRODUCTION PROCESS’, point 2.2. is amended as follows: (a) point (c) is replaced by the following: ‘(c) the EU declarations of conformity for the component EU fertilising products of the fertilising product blend and a specimen of their physical label or leaflet in accordance with Article 11a and, if the information is provided only on a digital label in accordance with that Article, a specimen of the data carrier of the component EU fertilising products,’; (b) point (e) is replaced by the following: ‘(e) a specimen of the physical label or the leaflet referred to in Article 11a providing the information required in accordance with Annex III and if the information is provided only on a digital label in accordance with that Article, a specimen of the data carrier,’.