ANNEX IISupplementary provisions
ANNEX II ‘ANNEX IIIa LABEL WITH REPAIRABILITY INFORMATION A. Label for condenser tumble dryers with repairability class pictogram 1. LABEL FOR CONDENSER TUMBLE DRYERS WITH REPAIRABILITY CLASS PICTOGRAM Figure 4a The following information shall be included in the label: I QR code; II trademark; III model identifier; IV scale of energy efficiency classes from A to G; V the energy efficiency class determined in accordance with Annex II; VI weighted average energy consumption per 100 drying cycles in kWh, rounded to the nearest integer and calculated in accordance with Annex IV; in case of gas-fired tumble dryers, the weighted average energy consumption (gas and electricity) per 100 drying cycles in kWh, rounded to the nearest integer and calculated in accordance with Annex IV; VII repairability class determined in accordance with Annex II, calculated in accordance with Annex IV; VIII condensation efficiency class determined in accordance with Annex II, with relevant pictogram and value rounded to the nearest integer and calculated in accordance with Annex IV; IX acoustic airborne noise emission class of the drying cycle of the eco programme, with relevant pictogram and value in dB(A), determined in accordance with Section 4 of Annex IV; X rated capacity, in kg, for the eco programme at full load; XI duration of the eco programme at full load in hours and minutes [h:min] rounded to the nearest minute; XII the number of this Regulation, which is “2023/2534”. 2. LABEL DESIGN FOR CONDENSER TUMBLE DRYERS WITH REPAIRABILITY CLASS PICTOGRAM Figure 4b Whereby: (a) the label shall be at least 96 mm wide and 192 mm high. Where the label is printed in a larger format, its content shall nevertheless remain proportionate to the specifications in Figure 4b; (b) the background shall be 100 % white; (c) the typeface shall be Verdana; (d) the dimensions and specifications of the elements in the label shall be as indicated in the label designs in this Annex; (e) colours shall be CMYK – cyan, magenta, yellow and black following this example: 0,70,100,0: 0 % cyan, 70 % magenta, 100 % yellow, 0 % black; (f) the label shall fulfil all of the following requirements (numbers refer to Figure 4b): the colours of the EU logo shall be as follows: — the background: 100,80,0,0; — the stars: 0,0,100,0; the colour of the energy logo shall be: 100,80,0,0; the QR code shall be 100 % black; the trademark shall be 100 % black and in Bold 9 pt; the model identifier shall be 100 % black and in Regular 9 pt; the A to G scale shall be as follows: (a) the letters in the arrows shall be 100 % white and in Bold 16 pt, and shall be centred on an axis at 4,5 mm from the left side of the arrows; (b) the background colours of the arrows shall be as follows: (i) A-class: 100,0,100,0; (ii) B-class: 70,0,100,0; (iii) C-class: 30,0,100,0; (iv) D-class: 0,0,100,0; (v) E-class: 0,30,100,0; (vi) F-class: 0,70,100,0; (vii) G-class: 0,100,100,0; the internal dividers shall be 80 mm wide and have a weight of 0,5 pt. The colour of the dividers shall be 100 % black; the energy efficiency class arrow shall be 100 % black. The letter inside the energy efficiency class arrow shall be 100 % white and in Bold 26 pt, and it shall be positioned in the centre of the rectangular part of the arrow. The energy efficiency class arrow and the corresponding arrow in the A to G scale shall be positioned in such a way that their tips are aligned; the value of the weighted energy consumption per 100 drying cycles shall be in Bold 28 pt; “kWh/” shall be in Regular 18 pt; the number “100” in the icon representing 100 drying cycles shall be in Regular 14 pt. The text shall be centred in the column and in 100 % black; the pictograms shall be as shown in the label design and as follows: (a) the lines of the pictograms shall have a weight of 1,2 pt and they and the texts (numbers and units) shall be 100 % black; (b) the A to D scales of the condensation efficiency pictogram and of the acoustic airborne noise emission pictogram shall be aligned on a vertical axis on the left side of the icon, with the letter of the applicable class in Bold 12 pt and the other letters of the rest of the classes in Regular 8 pt; (c) the number of the condensation efficiency pictogram shall be in Bold 9 pt and the unit in Regular 9 pt, with the number and the unit next to each other and centred inside the pictogram; (d) the A to E scale of the repairability class pictogram shall be aligned on a vertical axis on the left side of the icon, with the letter of the applicable class in Bold 12 pt and the other letters of the rest of the classes in Regular 8 pt; (e) the number of the acoustic airborne noise emission pictogram shall be in Bold 12 pt and the unit in Regular 9 pt, with the number and the unit next to each other and centred inside the pictogram; (f) the number of the rated capacity pictogram shall be in Bold 16 pt and the unit in Regular 12 pt, with the number and the unit next to each other and centred under the pictogram; (g) the number of the duration of the eco programme pictogram shall be in Bold 16 pt and it shall be centred under the pictogram; the number of the Regulation shall be 100 % black and in Regular 6 pt. B. Label for non-condenser tumble dryers with repairability class pictogram 1. LABEL FOR NON-CONDENSER TUMBLE DRYERS WITH REPAIRABILITY CLASS PICTOGRAM Figure 4c The following information shall be included in the label: I QR code; II trademark; III model identifier; IV scale of energy efficiency classes from A to G; V the energy efficiency class determined in accordance with Annex II; VI weighted average energy consumption per 100 drying cycles in kWh, rounded to the nearest integer and calculated in accordance with Annex IV; in case of gas-fired tumble dryers, the weighted average energy consumption (gas and electricity) per 100 drying cycles in kWh, rounded to the nearest integer and calculated in accordance with Annex IV; VII repairability class determined in accordance with Annex II, calculated in accordance with Annex IV; VIII acoustic airborne noise emission class of the drying cycle of the eco programme, with relevant pictogram and value in dB(A), determined in accordance with Section 4 of Annex IV; IX rated capacity, in kg, for the eco programme at full load; X duration of the eco programme at full load in hours and minutes [h:min] rounded to the nearest minute; XI the number of this Regulation, which is “2023/2534”. 2. LABEL DESIGN FOR NON-CONDENSER TUMBLE DRYERS WITH REPAIRABILITY CLASS PICTOGRAM Figure 4d Whereby: (a) the label shall be at least 96 mm wide and 192 mm high. Where the label is printed in a larger format, its content shall nevertheless remain proportionate to the specifications in Figure 4d; (b) the background shall be 100 % white; (c) the typeface shall be Verdana; (d) the dimensions and specifications of the elements in the label shall be as indicated in the label designs in this Annex; (e) colours shall be CMYK – cyan, magenta, yellow and black following this example: 0,70,100,0: 0 % cyan, 70 % magenta, 100 % yellow, 0 % black; (f) the label shall fulfil all of the following requirements (numbers refer to Figure 4d): the colours of the EU logo shall be as follows: — the background: 100,80,0,0; — the stars: 0,0,100,0; the colour of the energy logo shall be: 100,80,0,0; the QR code shall be 100 % black; the trademark shall be 100 % black and in Bold 9 pt; the model identifier shall be 100 % black and in Regular 9 pt; the A to G scale shall be as follows: (a) the letters in the arrows shall be 100 % white and in Bold 16 pt, and shall be centred on an axis at 4,5 mm from the left side of the arrows; (b) the background colours of the arrows shall be as follows: (i) A-class: 100,0,100,0; (ii) B-class: 70,0,100,0; (iii) C-class: 30,0,100,0; (iv) D-class: 0,0,100,0; (v) E-class: 0,30,100,0; (vi) F-class: 0,70,100,0; (vii) G-class: 0,100,100,0; the internal dividers shall be 80 mm wide and have a weight of 0,5 pt. The colour of the dividers shall be 100 % black; the energy efficiency class arrow shall be 100 % black. The letter inside the energy efficiency class arrow shall be 100 % white and in Bold 26 pt, and it shall be positioned in the centre of the rectangular part of the arrow. The energy efficiency class arrow and the corresponding arrow in the A to G scale shall be positioned in such a way that their tips are aligned; the value of the weighted energy consumption per 100 drying cycles shall be in Bold 28 pt; “kWh/” shall be in Regular 18 pt; the number “100” in the icon representing 100 drying cycles shall be in Regular 14 pt. The text shall be centred in the column and in 100 % black; the pictograms shall be as shown in the label design and as follows: (a) the lines of the pictograms shall have a weight of 1,2 pt and they and the texts (numbers and units) shall be 100 % black; (b) the A to D scale of the acoustic airborne noise emission pictogram shall be aligned on a vertical axis on the left side of the icon, with the letter of the applicable class in Bold 12 pt and the other letters of the rest of the classes in Regular 8 pt; (c) the A to E scale of the repairability class pictogram shall be aligned on a vertical axis on the left side of the icon, with the letter of the applicable class in Bold 12 pt and the other letters of the rest of the classes in Regular 8 pt; (d) the number of the acoustic airborne noise emission pictogram shall be in Bold 12 pt and the unit in Regular 9 pt, with the number and the unit next to each other and centred inside the pictogram; (e) the number of the rated capacity pictogram shall be in Bold 16 pt and the unit in Regular 12 pt, with the number and the unit next to each other and centred under the pictogram; (f) the number of the duration of the eco programme pictogram shall be in Bold 16 pt and it shall be centred under the pictogram; the number of the Regulation shall be 100 % black and in Regular 6 pt. ’